Test plan:
1. Make sure syspref "opacbookbag" is set to "Allow".
2. Make sure syspref "HoldsNeedProcessingSIP" is set to "Don't fulfill".
3. Place a hold on an item.
4. Return item via SIP at the pickup library.
5. View biblio in Opac.
6. Note that it says "Available" as status.
7. Add biblio to Cart.
8. Open Cart.
9. Note that it says "Available" as status.
10. Apply patch.
11. Reload Opac page.
12. It should now say "On hold".
13. Reload Card page.
14. It should also say "On hold".
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note for QA:
The code for SMSnumber is still made dependent on
EnhancedMessagingPreferencesOPAC in order to not
disturb current behavior.
This fixes Enhanced on, EnhancedOPAC off; the case of
Enhanced off is not considered here.
Test plan:
Enable EnhancedMessaging, disable EnhancedMessagingOPAC.
Enable TranslateNotices.
Check if you can only change notice language on OPAC.
Enable EnhancedMessagingOPAC.
Check if you change messaging prefs too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: marie-luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch ensures HoldFeeMode is considered when displaying a message
to patrons on the OPAC that says they'll be charged a hold fee when
placing or collecting the hold.
When HoldFeeMode is set to not_always or "only if all items are checked
out and the record has at least one hold already" then the hold fee
message should only show if all items on the record are checked out, AND
the record has at least one hold already - both of these conditions must
be met.
To test:
1. Go to Administration -> Patron categories
2. Edit your patron category and give a hold fee of $1.
3. Go to Administration -> System preferences and search for
HoldFeeMode. Set to 'only if all items are checked out and the record
has at least one hold already' if not already set. Keep this tab open.
4. In another tab, open the OPAC.
5. Search the OPAC for a record with one item which is NOT checked out.
6. Go to place a hold on this record. Confirm you see a message saying
that you will be charged a hold fee, even though not all items are
checked out and the record does not have a hold --> This is the bug.
7. Apply patch and restart services.
Items available, no holds placed
8. Repeat steps 5-6. This time, you should NOT see the hold fee message.
Items available, holds placed
9. In your staff interface tab, find the same record.
10. Place a hold for a different patron on this record.
11. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, no holds placed
12. In your staff interface tab, cancel the hold placed on this record.
13. Check out the item to a different patron.
14. In your OPAC tab, find this record again and go to place a hold. You
should NOT see the hold fee message.
No items available, holds placed
15. In your staff interface tab, keep the item checked out to another
patron.
16. Place a hold for a third patron on this record.
17. In your OPAC tab, find this record again and go to place a hold. You
SHOULD see the hold fee message.
Multiple holds
18. Search the OPAC for a record. Make sure your search will return more
than one result, including our test record.
19. Check the checkbox for our test record, plus another record where
the item is not checked out.
20. Click the Place hold button to place holds on all of our selected
records. You should only see the hold fee message above our test record.
21. In your staff interface tab, test setting HoldFeeMode to the other
values and confirm the hold message shows on the OPAC as expected.
22. Confirm tests pass t/db_dependent/Reserves/GetReserveFee.t
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref to allow customizing the authority results
view at OPAC with XSLT
Test plan:
1. For testing make sure to have at least one or more authorities
defined
2. OPAC: Home > Authority search(Submit) > Authority search results
Notice the normal view of results
3. Apply patch
4. INTRA: Home > Administration > System preferences ->find
"AuthorityXSLTOpacResultsDisplay"
5. Write the path where your file is. You can use the one for intranet:
.../koha/koha-tmpl/intranet-tmpl/prog/en/XSLT/UNIMARCauthResults.xsl
6. Save changes
7. Repeat step 2 and notice the xslt view of results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are sanitizing other attributes but "extended patron attributes".
Test plan:
Make a patron attribute editable at the OPAC
Edit an existing patron, or register a new one
Use a script tag in the new value ("<script>alert("booh!")</script>" for
instance)
With this patch the value is remove if containing an HTML tag that is
not br b i em big small strong (see C4::Scrubber)
Signed-off-by: Mark Hofstetter <koha@trust-box.at>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
SendPasswordRecoveryEmail relies on the calling script to tell if there is an
existing valid recovery already. If there's an expired recovery-entry the
members/notices.pl script will try to create a new entry resulting in a duplicate
key error.
This patch fixes the bug by removing the need for the calling script to do the check as
since SendPasswordRecoveryEmail does the same thing anyway.
SendPasswordRecoveryEmail will now use DBIx ->update_or_create instead of looking at
the $update param to determine if it should update an existing entry or create a new.
The update param is removed from all calling scripts and test are updated.
To test:
1. Generate a password recovery mail for a patron
2. Let it expire.
3. Generate a new password recovery from staff to the same patron - Fail!
4: Apply patch
5. Generate a new password recovery from staff to the same patron - Success!
6. Opac password recovery flow should also work.
7. Tests pass.
Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the filters on the results pages with the facets
Sponsored-by: Sponsored by: Round Rock Public Library [https://www.roundrocktexas.gov/departments/library/]
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No test plan: parameter is already obsolete.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Previous patch added interface parameter passed on each call. There was an
existing one that 'guessed' - this patch removes that
Fixes missing comma
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset adds an 'interface' parameter to XSLTParseForDisplay to avoid fetching
coins when not needed
Additionally we move some logic from the scripts to searchResults to avoid an extra fetch fo the biblio object
To test:
1 - Enable COinSinOPACResults syspref
2 - Also enable OPACShowOpenURL and OPACOpenURLItemTypes - adding an itemtype that you can find
3 - Perform a search on the OPAC and confirm coins are included and openurl shown
4 - Perform a search on staff client and confirm openurls do not show
5 - Apply patch
6 - Results should be the same
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows users to change the pickup location for their holds
from the opac. A syspref (OPACAllowUserToChangeBranch) controls at what
stage a hold can be changed.
To test:
1. Set up holds with diffrent statuses for a patron (pending, waiting,
in transit, suspended)
2. No pickup locations for any hold should be able to be changed.
3. Turn on and off the different options under
OPACAllowUserToChangeBranch. Make sure that only the corresponding
holds can be changed from the opac. Check eg in the staff client that
pickup location has changed.
4. The available pickup locations should respect any transfer
restrictions. (Same as the
holds list for a biblio in staff client)
5. For an in-transit hold: Check in the item at the original pickup
location.
6. Note that it will be redirected to the new location.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Check both cases: one library (public accessible) and more
libraries (public accessible). In the latter case click on
one of these libraries too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Enable suggestion & AnonSuggestions sysprefs and set AnonymousPatron = 1
2. Visit the OPAC without logging in
3. Confirm you can successfully create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
4. Disable the AnonSuggestions syspref
5. Confirm you cannot see links to make purchase suggestions on the
following pages:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
6. Confirm if you try visiting /cgi-bin/koha/opac-suggestions.pl page
you are re-directed to a login page
7. Select the category of your user in the suggestionPatronCategoryExceptions syspref
8. Log into the OPAC
9. Confirm you cannot see links to make purchase suggestions on the
following pages:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
10. Confirm if you try visiting /cgi-bin/koha/opac-suggestions.pl page
you are re-directed to a 404 error page
11. Enable AnonSuggestions syspref
12. Confirm you can successfully create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
13. Disable AnonSuggestions syspref and un-check your category from
suggestionPatronCategoryExeptions syspref
14. Confirm you can create a suggestion from:
- Item detail page
- Search result page
- Masthead under the 'Library catalogue' search box
- opac-user.pl ('Your summary') page
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Introduce a suggestionPatronCategoryExceptions system preference.
If the suggestion syspref is enabled then libraries can stop specific
borrower types from making suggestions by ticking the type in the
suggestionPatronCategoryExceptions syspref.
Test plan:
1. Apply patches, update database, re-start services
2. Set 'suggestion' syspref = 'Allow'
3. Confirm you can view the purchase suggestion links on OPAC biblio detail
page & 'your summary' page. As well as successfully submit a suggestion.
4. Select the patron category you're logged in as in
suggestionPatronCategoryExceptions syspref
5. Confirm the purchase suggestion links are hidden in the OPAC biblio
detail page & 'your summary' page
6. In your browser enter the link: <OPAC base URL>/cgi-bin/koha/opac-suggestions.pl
e.g. http://localhost:8080/cgi-bin/koha/opac-suggestions.pl
7. Confirm a 404 page loads
8. Confirm you can view/moderate suggestions in the staff
client - even though your patron is selected in the
suggestionPatronCategoryExceptions syspref
9. Untick your patron category in the suggestionPatronCategoryExceptions syspref
10. Confirm you can view the purchase suggestion links on the OPAC, as
well as successfully submit a suggestion.
11. Set 'suggestion' syspref = "Don't allow"
12. Confirm the purchase suggestion links are hidden in the OPAC
13. Select all patron categories in suggestPatronCategoryExceptions
syspref. View the OPAC without logging in and confirm you can perform
searches and view OPAC biblio detail pages.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the part_number and part_name in the opac results browser.
To test:
0. Apply patch
1. Download the sample records and import into Koha
1.1. Download the sample mrc file
1.2. In Koha staff interface, go to Tools > Stage MARC records for import
1.3. Click 'Browse' and choose the file
1.4. Click 'Upload file'
1.5. Click 'Stage for import'
1.6. Click 'Manage staged records'
1.7. Click 'Import this batch into the catalog'
2. Make sure OpacBrowseResults is enabled
2.1. In Koha staff interface, go to Administration > Global system preferences
2.2. Search for OpacBrowseResults
2.3. If necessary, change to 'enable' and click 'Save all OPAC preferences'
3. In OPAC, search for BFF and browse the results
3.1. In Koha OPAC, search for BFF
3.2. Click on one of the titles to access the opac-detail page
3.3. Click 'Browse results'
--> The browser should show the main title, along with the number and volume title.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the 'cancel selected recalls' button on the biblio
details Recalls page, and ensures a correct cancellation reason is
logged when cancelling a recall in transit.
To test:
1) Ensure UseRecalls is enabled and relevant recalls circulation rules
are set
2) Check out Item A to Patron B
3) Log into OPAC as Patron A
4) Search for Item A and place a recall
5) Go back to the staff interface and search for Item A. When viewing
the biblio record, go to the recalls tab.
6) Check the checkbox for your recall, and click the button to cancel
selected recalls.
7) Confirm your recall is successfully removed and you're redirected to
the correct recalls page for this biblio.
8) Go back to the OPAC and place a recall again. This time set the
pickup location to a different library, one that you're not logged in at
9) Back in the staff interface, check in Item A and confirm the recall
and transfer
10) Go to Circulation -> Recalls to pull. Your recall should show here.
Click the button to cancel the recall and revert the transfer
11) Confirm the recall has been cancelled
12) Go to Reports and create a new SQL report with the following SQL:
select * from branchtransfers b join items i on
b.itemnumber=i.itemnumber where i.barcode = <<barcode>>
13) Run the report and paste the barcode of Item A in the field
14) Confirm there are two rows returned - the transfer triggered when
the recall was confirmed, with a reason of 'Recall' and a cancellation
reason of 'RecallCancellation, and the transfer sending the item back
home when the recall was cancelled, with a reason of
'RecallCancellation'.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a check for the preference OPACAcquisitionDetails and fetches
the active orders for the item if necessary
Additionally, we simply the check for biblio orders to use object methods
and remove code that stored order information in the item_info
To test:
1 - Enable preference: OPACAcquisitionDetails
2 - Create a basket with items created on order, add an order for a biblio, close the basket
3 - Create a second basket as above, add an order with multiple copies, leave basket open
4 - View biblio on opac
5 - You should see 1 item marked on order, and "1 items on order" below items table
6 - Close second basket
7 - Reload opac view, now 3 on order and in message
8 - Reopen first basket
9 - Reload opac view, now 2 on order and in message
JK: Remove unused @itemnumbers_on_order variable
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This never really made it. So let's remove all traces.
Test plan:
Look at code changes and git grep reqholdnotes.
Bonus: Place a hold with/without hold notes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When you print a receipt slip in SCO, the library/branch you are at
in should be fetched from the logged in staff member's data (staff login
done before entering SCO view) instead of the patron's own who has signed
in to the SCO. Printing a slip shows patron's own home branch in the slip
as the branch they're in. This causes confusion with patrons who want to
print receipts/slips.
Test plan:
1) Make sure the staff user's library (used to login into SCO patron
view) is not the same as the patron's who is logging into SCO
2) Print a slip in SCO and notice patron's home library printed on the slip
3) Apply patch
4) Print a slip in SCO and notice the library is now the staff user's library
used to sign in to SCO patron view.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Apply all patches
2. Update database
3. Restart services
4. Set email addresses in:
- KohaAdminEmailAddress syspref
- EmailAddressForPatronRegistrations syspref
- Email address in the library branch
5. Enable PatronSelfRegistration syspref
6. Test the following use cases:
- EmailPatronRegistrations syspref = 'none'.
Submit OPAC registration.
= OUTCOME: Confirm no OPAC_REG notice in message_queue table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch just removes two redundant use directives in opac-memberentry.pl
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: This patch disables the API call (which is not really needed),
and still needs attention in a following patch.
Test plan:
Add opac_info for two libraries and a branchurl for one of the two.
Select a biblio with an item having these two libraries as either
home or holding branch.
Toggle OpacLocationBranchToDisplay and check items table on opac
detail. Click on the library name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have an item with a callnumber defined
2. Have OPACShelfBrowser enabled
3. Open the record detailed view in the OPAC
4. Click on 'Browse shelf'
=> FAIL: It explodes
5. Apply this patch
6. Repeat 4
=> SUCCESS: It works!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This will save us fetching more info if we are denying the holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The only bit we get form the hash is the rank and title
We can simply fetch the biblio once to calculate
no need to fetch all the info as we don't display or use it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
New holds have found set to undef - we can do this directly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Here the items biblionumber is either equal to the biblionumber passed
in or it is not and should be - we can just assign directly from the
item in all cases
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Search for the variables, they aren't used!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is defined but never used
To test:
1 - git grep noreserve
2 - only one ocurrence
3 - Apply patch
4 - repeat, no ocurrence
5 - Note the plural has a few uses
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently we loop over all the holds on the record to get a count of the reserves not
waiting and a rank for the upcoming hold
We can simply count the number of nont waiting holds and add 1
Note: Before this patch the count of holds included the new hold we were going to place
which meant rank and count were the same. I believe countaing existing holds and our
upcoming rank is the correct behavior
To test:
1 - Set OPACShowHoldQueueDetails system preference to 'Show holds and their priorty level'
2 - Place a few holds on a bib on the staff side
3 - Mark 1 waiting
4 - Attempt to place hold on the bib on the opac
5 - Note 'Your priority' and 'Number of holds' are the same number
6 - Place another hold, confirm both increase
7 - Set another hold waiting, confirm both decrease
8 - Apply patch
9 - Confirm 'Your priority' is now 1 greater than Number of holds
10 - Place a hold, set a hold waiting, confirm numbers adjust as appropriate
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the call to GetTransfers in opac-basket with the
get_transfer method available from the Koha::Item object
Test plan
1/ Trigger the transfer of the item
2/ Check the opac-basket page for the display of the current transfer
status
3/ Apply patch
4/ Repeat step 2
JK: Remove unneeded string formatting for transfertwhen as it's done
on the template toolkit side already with $KohaDates. Add missing
Koha::Items module import.
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the call to GetTransfers in opac-reserve with the
get_transfer method available from the Koha::Item object
Test plan
1/ Place a reserve on an item at a different branch
2/ Trigger the transfer of the item
3/ Check the opac-reserves page for the display of the current transfer
status
4/ Apply patch
5/ Repeat step 3
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) lead to
koha-tmpl/opac-tmpl/bootstrap/en/includes/item-status.inc
use the bundle_host method directly through the passed
Koha::Item object, thus the bundle_host field added by
this script is unused.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) caused the OPAC detail page only show
"Available" status even when the item was in transit.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) cause the OPAC detail page only show
"Available" status even when there were waiting holds.
The onhold item field is removed at the same go as it was confusing
and unused since "Bug 2655: Fixes availabilty counts if items are on
hold shelf. Patch (2/2)" (a37545eb1)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces opac-ratings-ajax.pl with a new REST API route
POST /public/biblios/42/ratings
Note that we could go further and refactor the 'start_rating' select
code.
Test plan:
Test the "star ratings" feature at the OPAC, on the different page
where it's displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Add a CMS page with two languages for it.
Look at the code column in the DB.
Try opac/opac-page.pl?code=[CODE]&lang=[LANG]. Test leaving lang
empty and passing various languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: I squashed the lang => language patch
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an explanation when a hold cannot be placed, in some situation:
tooManyReserves
tooManyHoldsForThisRecord
tooManyReservesToday
itemAlreadyOnHold
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Take note of what your logged in library is
2. Add a new page that can be viewed on the OPAC and staff interface.
Limit the library to a different library, not your logged in library
3. Use a News item to create a hyperlink to your new page on the OPAC
and staff interface.
4. Confirm that a page error shows if you try to view the new page.
5. Edit the new page and set the library to All libraries.
6. Try to go to the new page again and confirm it shows.
7. Log out and log back into the staff interface as a staff user that
isn't a superlibrarian
8. Confirm you can view the new page as this user
Sponsored-by: Horowhenua Libraries Trust
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This page utilises the Additional Contents feature to add custom pages
to the staff client and the OPAC in the user's desired language.
To test:
1. Apply patch and restart services
2. In the staff client, go to Tools, then go to the new 'Pages' page
3. Add a new page to display on both the staff client and OPAC.
4. Confirm the URLs in the Page URL column work as expected.
5. Confirm that any pages made for the staff client only do not show in
the OPAC, and that any pages made for the OPAC only do not show in the
staff client.
6. Confirm that pages do not show on the OPAC main page where news items
show. Confirm news items show on the OPAC main page as expected.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
