Don't retrieve prefs if we won't need them
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Set variables ($sysxml, $xslfilename, $lang) if they are not passed to
the subroutine. This happens from catalogue/detail.pl,
opac/opac-shelves.pl, opac/opac-tags.pl and virtualshelves/shelves.pl.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On search, every single result goes through some XSLT processing.
This includes fetching the relevant sysprefs every single time.
We should do it only once per search.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This should trigger the error. Attempts to shift system time
zones did not make sense as to the number of failures.
Added Time::Fake dependency, if it isn't installed these extra
tests don't run. There is a nice skip message about it.
Added License text.
TEST PLAN
---------
1) apply test patch
2) sudo dpkg-reconfigure tzdata
-- set your system time to GMT (Africa/Abidjan)
3) prove t/Circulation/AgeRestrictionMarkers.t
-- should not fail, even if you change system
time to any time.
4) sudo dpkg-reconfigure tzdata
-- set your timezone to Eastern
5) sudo date -s"2015-06-18 21:15:00"
6) date
-- should be past 9pm Eastern timezone
7) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
8) sudo date -s"2015-06-18 12:00:00"
9) date
-- should be noon Eastern timezone
10) prove t/Circulation/AgeRestrictionMarkers.t
-- success?! Time sensitive tests are bad tests.
11) sudo apt-get install libtime-fake-perl
12) prove t/Circulation/AgeRestrictionMarkers.t
-- kaboom!
-- changing timezone to anything other than GMT
should trigger a kaboom.
13) apply fix patch
14) prove t/Circulation/AgeRestrictionMarkers.t
-- should work all the time.
15) less t/Circulation/AgeRestrictionMarkers.t
-- the license text should be similar to
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
16) koha qa test tools.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is best to test when UTC date is a date in the future compared
to your timezone. I'm in Eastern, so right now, I expect this
test to fail for another 2.5 hours.
TEST PLAN
---------
1) prove t/Circulation/AgeRestrictionMarkers.t
-- fails for PEGI 15 after 9pm.
2) Apply patch
3) prove t/Circulation/AgeRestrictionMarkers.t
-- works.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds three parameters to the cron job: -before and -after, and
-branch.
You can run the cronjob now in an adjusted frequency: say once a week with
before 6 or after 6 (not both together). If your pref is set to 14, running
before=6 will include expiries from 8 days to 14 days ahead. When you
use after=6, you would include 14 days to 20 days ahead, etc.
You could also rerun the job of yesterday by setting before=1 and after=-1;
this could help in case of problem recovery.
Obviously, the branch parameter can be used as a filter.
NOTE: Why are these parameters passed only via the command line?
Well, obviously the branch parameter is not suitable for a pref.
The before/after parameter allows you to handle expiry mails different from
the normal scheme or could be used in some sort of recovery. In those cases
it will be more practical to use a command line parameter than editing a
pref.
NOTE: The unit test has been adjusted for the above reasons, but I also
added some lines to let existing expires not interfere with the added
borrowers by an additional count and using the branchcode parameter.
Test plan:
[1] Run the adjusted unit test GetUpcomingMembershipExpires.t
[2] Set the expiry date for patron A to now+16 (with pref 14).
Set the expiry date for patron B to now+11.
[3] Run the cronjob without range. You should not see A and B.
[4] Run the cronjob with before 3. You should see patron B.
[5] Run the cronjob with before 3 and after 2. You should see A and B.
[6] Repeat step 5 with a branchcode that does not exist. No patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Test pass
No errors
New parameters work with one (-) or two(--) dashes, no problem
with that but convention suggest that 'long' options use two-dashes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes:
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 373.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 390.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 399.
Use of uninitialized value in string eq at /home/koha/kohaclone/C4/ILSDI/Services.pm line 423.
Test plan:
Run t/db_dependent/ILSDI_Services.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes it possible to limit a patron search to
search just for surnames.
To test:
- Apply the patch
- Add two patrons, called e.g. "John Doe" and "Doe John"
- Go to Patrons in the Intranet
- Make sure you have selected "Search fields" = Standard
- Search for "john" and verify both patrons show up
- Search for "doe" and verify both patrons show up
- Set "Search fields" = Surname and search for "john".
"Doe John" should show up, but not "John Doe".
- Set "Search fields" = Surname and search for "doe".
"John Doe" should show up, but not "Doe John".
Update: Revised the last point in the test plan.
Sponsored-by: Alingsås Public Library, Sweden
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes a warn and some commented warns.
Test plan:
Nothing to do here. Will be covered later by additional unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This seems to cause fewer problems with the existing acquisitions code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a test to check the unicity of auth cats, simplify
the GetBudgetAuthCats subroutine and make it return an arrayref of scalar
instead of an arrayref of hashref with only 1 key.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When displaying a budget, the Planning button in the admin toolbar displays
Plan by months
Plan by libraries
Plan by item types
Plan by
The last one is empty, due to C4::Budgets::GetBudgetAuthCats returning an empty field if the budget has no sort defined.
This prevents returning an array with empty element(s)
TEST:
1) Admin -> Budgets
2) Select a budget
a) you must have '' (empty) in your aqbudgets.sort1_authcat field.
b) edit the budget (direct DB or interface) to get that.
3) Click on Planning dropdown, see the "Plan by <nothing> " entry.
4) apply the patch, revalidate.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more empty option
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Remove a vim inserted i from XSLT.pm: IdRefi => IdRef.
[2] The comment about UNIMARC is somewhat confusing. Rephrased it.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add option show or no inactive budget and more options
Use subroutine GetBudgetHierarchy for return all budgets
Delete subroutine GetBudgetPeriodDescription and theire tests
Use Price TT plugin
Correct name of column and capitalization the first letter
Add checkbox for show inactive budgets, default the drop down list containt a active budget
Not use [i] for inactive budgets, i add (inactive) at the end of inactive budget
Add vendor note in the list of show attribute
Test case:
Go to Home > Reports > Orders by fund
Select one or all budgets
You can show the inactive budget, default the drop down list containt a active budget
Choose output to screen ou csv file
Works as expected. QA tools OK with Bug 16104 applied.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed 'Fund (budget):' back to 'Fund:', as the budget
no longer shows in the pull down.
- Fixed number of tests in Budgets.t
- Removed &GetBudgetPeriodDescription
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to prevent patrons from placing holds on
items where there are other items available for the patron to
check out.
Test Plan:
1) Apply this patch
2) Browse to the circulation rules
3) Note the new option for "On shelf holds allowed"
4) Set the rule to "If all unavailable", set "item level holds" to allow
5) Find a patron/branch/itemtype applicable to this rule
6) Ensure at least one item on the record is available for the
patron to check out
7) Attempt to place a hold for the item
8) Note you cannot place the hold
9) Check the available item out to another patron
10) Note you can now place a hold for the first patron
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Works as intended!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding reserves.itemtype made a query to fail in CanItemBeReserved.
This patch prefixes the column names with the corresponding table names
to prevent that.
You can trigger the error by running
prove t/db_dependent/Holds.t
You should see something like this:
Column 'itemtype' in where clause is ambiguous
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch removes the mysqlism (see comment #18)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed QA tools complaints about missing lines before
and after =cut in POD.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
To reproduce issue:
See comment #1
To test:
- Apply patch
- Leave syspref StatisticsFields empty
- Display statistics for an author
=> Result: Table displays Shelving location, Collection code, Item type
(as before)
- Change syspref to any combination of location|itype|ccode
=> Result: Table displays columns as appropriate
- Change syspref to some garbage
=> Result: Same as with empty syspref (was crashing without patch)
- Change syspref to valid combination with trailing |
=> Result: Table displays columns as appropriate (was crashing
without patch)
- Change syspref to a combination of valid and invalid fields
(location|blah|ccode)
=> Result: Table displays column of valid fields only (was crashing
without patch)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Overdues.pm line 588 tries to do an $accountline->set with column outstanding
instead of amountoutstanding.
This patch fixes it.
To test:
- Verify that code change is correct.
- Try to trigger a situation where an existing fine is updated
(see comment in line 574 in C4/Overdues.pm)
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch does the same as the previous one, but affects lines which
have not been caught by the regex.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The zebraqueue table should still be populated with updates if ES is enabled, so
the Zebra indexer keeps the Z39.50/SRU indexes up to date.
To test:
- Set SearchEngine = Elasticsearch
- Watch for zebraqueue changes
$ watch -n 0.5 'echo "SELECT COUNT(*) FROM zebraqueue WHERE done=0" | sudo koha-mysql kohadev'
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> FAIL: Notice the watch is not changing the number of records to be indexed.
- Apply the patch
- Call touch_all_biblios.pl to simulate record changes
$ sudo koha-shell kohadev ; cd kohaclone
$ perl misc/maintenance/touch_all_biblios.pl -v
=> SUCCESS: The count raises (more than 0) and the zebra indexer picks the updates.
- Sign off
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This reverts commit cd4905c2969b067476881016d0b03271f0bcc7c8.
This commit caused an error in C4::Search::GetFacets when running in
zebra mode.
Conflicts:
Koha/SearchEngine/Elasticsearch/Search.pm
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
By default ES returns the facet terms ordered by most used, which makes
sense.
This patch removes resort done in the scripts (catalogue/search.pl and
opac/opac-search.pl) and moves it to the module.
For Zebra it's now done in C4::Search::getRecords, and there is no
change to expect (still alphabetically).
On the Elastic search side, we could imagine to let the library define
the order of the facets. The facet terms are now sorted by most used.
To test easily this change, turn on the displayFacetCount pref.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
When creating a patron attribute type, there is a "Allow password"
checkbox. If checked, the librarian will be able to enter a password for
this patron attribute when editing a patron.
The goal was to allow a patron to log in with a secondary password.
However, this feature has never been implemented.
"""
commit 6fc62bcd32
CommitDate: Mon May 12 09:03:00 2008 -0500
extended patron attributes tables & syspref (DB rev 081)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
"""
To decrease maintainability, this patch suggest to remove the 2 DB fields
borrower_attributes.password and
borrower_attribute_types.password_allowed
If they have not used by the library.
Test plan:
- Edit a patron attribute type and select "allow password"
- Edit a patron and defined a password for this attribute
- Execute the DB entry
- Note that you get a warning
- Empty the password field
- Execute the DB entry
- You do not get the warning and the 2 DB fields have been removed
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Currently if not logged in when browsing to
http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl
You are redirected to opac-auth.tt and SCOUserCSS and SCOUserJS are not
loaded. This page passes through a parameter to the template to indicate
this is an SCO login and appropriate CSS and JS should be loaded.
Additionally this patch ensure that when loggin in using the form you
are redirected to the sco-main.pl instead of the patron account page for
the user.
To test:
1 - Verify that normal login works on both staff and opac
2 - Verify that SCO link goes to login page if AutoSelfCheckAllowed is
set to "Don't allow"
3 - Enter changes into SCOUserJS and SCOUserCSS and observe these are
present on SCO log in page with AutoSelfCheck disabled
4 - Verify that a logged in opac user without permissions cannot access
the self-checkout module
5 - Verify that AutoSelfCheckAllowed and associated system preferences
function as expected
6 - Verify the AutoSelfCheck user is logged out if they attempt to visit
another page
Followed test plan.
If I go to http://YOURCATALOG/cgi-bin/koha/sco/sco-main.pl, CSS and JS trigger already on
the login form, I suppose that is intended.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
The default patron search types has changed from 'contain' to
start_with. Users consider it as a bug.
This patch revert the previous changes to default on 'contain'.
Test plan:
Search for patrons in different places (guarantor, checkout, patron
module, acquisition module, etc.) and confirm that the default is always
'contain'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
GetLoanLength arbitrary defaulted to 21. The expected behavior seems to
be to default on 0 (loan will be dued today).
IMPORTANT NOTE: This patch will introduce a change in the behaviors for
configuration with a 0 in issuelength. Before this patch, the rule with
a issuelength==0 was skipped, now it's used!
Test plan:
1/ Do not define any rule: the due date will be today (before this patch
was +21 days)
2/ Define some rules which does not match the patron category, itemtype
or branchcode: the due date will be today (before this patch was +21
days).
3/ Modify a rule to match the checkout and set issuelength=0: the due
date will be today (before this patch, the rule was skipped)
4/ Modify this rule and set the issuelength to something > 0: the due
date will be adjusted (same behavior as before this patch)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, checked 1-4
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The login page should not be displayed if the page is displayed in a
frame.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Added the following indexes:
Interest-age-level | 591$a ind1=1
Interest-grade-level | 591$a ind1=2
lexile-number | 591$a ind1=8
Reading-grade-level | 591$a ind1=0
Moved 'lex' from a zebra index to a ccl alias to lexile-number.
Changed the handling of st-numeric in C4/Search.pm to allow for search ranges.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch alters the MySQL query to remove a max statement which
incorrectly groups full annual barcodes with numeric values.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From C4::Koha::GetAuthorisedValues
# TODO: the "selected" feature should be replaced by a utility function
# somewhere else, it doesn't belong in here. For starters it makes
# caching much more complicated. Or just let the UI logic handle it, it's
# what it's for.
Indeed, it's not a job for a subroutine, the template should take care of that.
Note that a perf gain could be won with this patch \o/
Test plan:
- Edit an itemtype and check the value of the "Search category" dropdown list
- Edit a patron attribute type and check the value of the "Class" dropdown list
- Detail for a catalogue record, the Status column should be correctly
populated if items are damaged and/or lost
- Item details for a catalogue record, the lost, damaged and withdrawn
value should be correctly displayed
- Edit a patron, the "street type" should be correctly selected
- Create a patron attribute type linked to an authorised value list.
- Edit a patron, set a value for this attribute, edit it again. The
correct value should be selected.
- Search for subscriptions. The 'Location' dropdown list should behave
correctly (select the entry you have choosen before, etc.)
- Edit a subscription, the location dropdown list should select the
correct value.
- Edit and view a suggestion with a 'reason for suggestion' set (you
should have at least 1 OPAC_SUG AV defined)
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
subroutines should not take $dbh in parameter.
C4::Biblio::TransformMarcToKoha has it and does not use it.
Test plan:
Look at the patch and confirm that all occurrences of
TransformMarcToKoha have been modified.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
