To test:
- Check OPAC and intranet XSLT view for a record that contains
780 and 785 fields.
- Verify there is no space between the label and the content of the
field.
- Apply patch.
- Verify the display both in intranet and OPAC is a little nicer now.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small adjustments, requested by Kyle:
1) Rename Show notes button. It is called now: Edit notes.
2) Do not hide all other notes fields. The Edit button now only toggles
the corresponding hold notes field.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Many templates have instances where the path to the prog template is
hard-coded. Now that interface and theme template variables are
available everywhere these paths should be corrected to use them.
Image paths corrected:
- 'Patron image missing' image on circulation pages
- 'Locked' icon on fund planning page
- Tag and subfield edit icons on the authority, biblio editor, and batch
item modification pages (Clone tag, delete tag, clone subfield,
delete subfield, move subfield)
- 'Loading' icon when importing frameworks
Audio file paths corrected:
- Sounds for circulation.pl and returns.pl
Paths to DataTables assets corrected on:
- Transfers to receive report
- Holds queue report
- Holds awaiting pickup report
- Patron detail page (moremember.pl)
- Patron circulation history
- Update child to adult patron page
- Process offline circulations
- Catalog by item type report
- Serials statistics wizard
- Serial claims page
- Koha news
- Notices
- Batch patron modifications
Path to progress bar assets corrected on:
- Process offline circulations page
- Progressbar include file
- Stage MARC imports
- Manage MARC imports
- Local cover image upload
Other image paths:
- "Approved" checkmark image on tags review page
- Table sort icons on lists page
- Feed icon on OPAC search result page
- "Loading" image for OPAC plain MARC view
Path to ratings JavaScript on OPAC detail and results pages
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Checked all the pages modified by this patch, no problems noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some sites split tags on spaces, some on commas. Since Koha splits on a
comma, we should make that clear to the patron. This patch adds
additional text to the "New tag(s)" label.
To test, enable TagsEnabled, TagsInputOnDetail, and TagsInputOnList.
Click "Add tag" on both OPAC search results and an OPAC detail page.
Confirm that the revised label appears correctly.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. There are some more places where we can
add tags to multiple records at once, I noted them on the bug.
http://bugs.koha-community.org/show_bug.cgi?id=10259
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the CCSR theme's OPAC MARC view the table of items is truncated
because the container div is styled with "overflow:hidden." I think the
complete display of information is more important than not seeing a
horizontal scrollbar, so this patch removes the style.
To test, apply the patch and clear your browser cache. View a MARC
detail page for a title which has holdings and confirm that the entire
table can be seen. Test other pages to make sure no unwanted layout
changes have resulted.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Simple CSS change, no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds a "newsfooter" class to allow CSS modification
of the date appearing as a footer on each news.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a class, checked po files to make sure change is string safe.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The CCSR theme sets a min-width of 1000px for windows which are more
than 700px wide. This caused the cart popup window to be given a
min-width of 1000px, resulting in a broken layout with unnecessary
horizontal scrolling.
This patch adds a class to the cart template and to other pop-up window
templates to ensure that a large min-width is not enforced and to give
consistent padding to those pages.
To test, set your theme to 'CCSR' and view the following pop-up pages:
- The Cart. From the cart, trigger:
- The "send" window
- The "download" window
- From a view of a List's contents trigger:
- The "send" window"
- The "download" window
Each of these pages should look correct with no horizontal scrolling.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template and CSS changes only, but no string changes.
Save for inclusion in 3.12.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When the CCSR theme is enabled, selecting items in the cart and clicking
"place hold" triggers a JavaScript error and fails. This patch adds a
function missing from the CCSR version of basket.js.
To test, apply the patch and clear your browser cache.
- Enable the CCSR theme and put items into the OPAC cart.
- Open the cart, select one or more items, and click "place hold."
The cart should automatically close and the main window should redirect
to the holds screen showing your selections.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test passed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed patch fixes the problem described.
All tests and QA script pass, JavaScript only change.
No strings involved, save for inclusion in 3.12.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The previous patch missed removal of one template, kohaerror.tt, which
was used only by opac-userupdate.pl. This patch removes it.
To test, apply the patch and search Koha source files for references to
kohaerror. There should be none.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. Updating the German po files
with this patch applied no new strings appeared.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This Follow up patch will handle multi libraries pref
when it sets to "add" and enhance the way lists drop down menu appear
Test plan for all patches ( the first one and all follow ups ) :
1- apply the patches ( from the first one and all follow up patches)
2- use 3.10 po files and update it (for the master) "
../misc/translate/ perl translate update ar-Arab "
3- install Arabic from the updated po files
"perl translate install ar-Arab "
4- set opac opacthemes pref to ccsr
5- set OpacAddMastheadLibraryPulldown pref to add
6- select the Arabic from the opaclanguages pref
7- set opaclanguagesdisplay to allow
8- go to the opac and choose arabic
9- you will see all the directions from right to left
(as you look at koha on a mirror ;) ))
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as decribed. No errors.
With all patches applied, we get a pretty RTL interface.
Well done!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes are mostly CSS, one new image and a tiny template change.
Used po files from 3.8 for testing. Looks good!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up patch will delete the "-moz-box-sizing"
property that I was add when I'm doing some tests on
the rtl css file and I forgot to delete it
many thanks David Cook for your notes deleting that property will not effect on the results
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment on last patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch will add css file for the Opac CCSR
link this css file in the doc-head-close.inc
and add new image : arrow-left-grey-11x6.png
for the opposite direction of the right existing one.
the test plan is the same for the oldest patches
for opac prog and intranet ...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment on last patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[Patch submitted by David Cook]
Edmund, rather than myself, was the author of this patch,
so I'm not entirely sure about his code choices, but...it
looks like IE must process images differently than other
browsers.
It seems to me that the images are not appearing in IE,
because they're being regarded as incomplete or having
0/NULL natural width.
This patch simply introduces a try/catch hack where it
tries to add the image and remove any "no-image" elements
even nwhen the image is considered incomplete/width of
0/NULL. It won't do this if it catches any errors,
although I'm not sure that any errors would be caught
with this set up anyway...
It's certainly not the ideal solution, but it's a solution.
To Test:
Before applying the patch:
1) Use IE and FF/Chrome/other browser to view a record
with local images attached
2) Note that the local images appear in FF/Chrome/other,
but not in IE
Apply patch.
After applying the patch:
1) Repeat step 1 from above
2) Note that the local images now appear in all browsers
as they should.
--
As I mentioned before, this seems like a real suboptimal
solution. Any ideas on why IE might be considering local
images to be incomplete or having 0/NULL natural width?
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I did a regression test using Chromium and Firefox in
Ubuntu. I checked both prog and CCSR - covers displayed
nicely.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changed author of patch to reflect actual authorship.
Increase both on staff and OPAC interface
from 80 to 255 characters to be saved in
the database. Shown will be 80 characters.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Clean patch, workes as described.
To test:
- Apply patch and run database update
- Check that the column in the database is now varchar(255)
- Enter a new suggestion in the OPAC
- Edit this suggestion in staff
- Confirm form has the new max value set
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This bug is present in master and (at least 3.8.x, where we spotted it).
The patch makes adding items, to a list from the results page, not rely
only on opacbookbag syspref but also 'virtualshelves'.
Regards
To+
PS: Thanks Graciela Galli for reporting.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only patch, works nicely.
Test plan copied from bug report:
- Disable the opacbookbag syspref
- Login in the OPAC
- Create a list (I tested a private one)
- Search in your db for some biblios.
- Choose some and add them to the created list
- Go to your users's page, to the my lists tab
- Your list is empty.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It turns out that this was not a missing but a broken feature.
This patch corrects the template variables to make enumchron
show up on the item table for item level holds in the OPAC.
To test:
Try to place item level holds on
1) a record where at least one item
2) a record where none of the items
has items.enumchron information.
The column with enumchron should only show for 1), but not
for 2).
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch is an alternate solution to the problem of "0" not appearing
on the comment tab in translated templates. It uses the Template Toolkit
option of specifying a default value for a variable:
[% reviews.size || 0 %]
This syntax is already in use elsewhere in the template.
Same test plan:
1) Make sure comments/reviews are activated
2) Find a record with 0 comments/reviews in the opac
3) The tab shows: Comments ( 0 )
4) Switch to any other languages.
5) Tab now shows: <translation of Comments> ( )
6) Apply patch
7) Check English templates stil work correctly
8) Rerun 'perl translate install <langcode>
9) Check display is now correct.
10) Also check that number shows correctly for records
with comments.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Tested with nb-NO. English still works after the patch. Norwegian
was showing "Comments" untranslated, which had me a bit unnerved.
Turns out the string to be translated changed from "Comments ( %s%s%s%s )"
to "Comments ( %s )", so to make sure all was well, I had to update
the nb-NO translation, fix the number of %s's in the Norwegian string,
make sure it was not marked as fuzzy and then install nb-NO. And it
works!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Re-added the xsl that shouldn't have been removed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different settings for OpacItemLocation
and not for loan set in the item and for the item type.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In some XSLT, "items" namespace is used in exclude-result-prefixes but is not defined.
This patch add this namespace where missing.
Also corrects a koha.org, instead of koha-community.org, in one namespace URL.
Test plan :
- Enable XSLT on search results
- Perform a search
=> Look at error logs to check that there is no xsl error like :
[Fri Feb 08 15:35:06 2013] [error] [client 127.0.0.1] [Fri Feb 8 15:35:06 2013] opac-search.pl: compilation error: file koha-tmpl/opac-tmpl/prog/en/xslt/UNIMARCslimUtils.xsl line 8 element stylesheet, referer: http://opac.master.community.localhost/cgi-bin/koha/opac-detail.pl?biblionumber=299
[Fri Feb 08 15:35:06 2013] [error] [client 127.0.0.1] [Fri Feb 8 15:35:06 2013] opac-search.pl: xsl:exclude-result-prefixes : undefined namespace items, referer: http://opac.master.community.localhost/cgi-bin/koha/opac-detail.pl?biblionumber=299
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With comment on Bugzilla.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The current problem:
When the verify_images() function runs from amazonimages.js, it loops
through every img element and selects the elements that come from Amazon
sources.
However, if the height/width is 1 (i.e. Amazon passes off a blank image)
or if the img element's complete property is null or non-existent, then
it searches for the parent node and re-writes the HTML with the "No
Cover Image Available" (NO_AMAZON_IMAGE) text, even though that parent
node might contain other img elements that have images available (from
Google, local images, etc)!
Proposed fix:
Wrap the Amazon image in a span tag (as we do with the Google and local
covers), so that it re-writes the HTML within that parent span, rather
than the parent anchor which contains all the other images.
To test:
1) Turn on the OPACAmazonCoverImages, GoogleJackets, and
OPACLocalCoverImages system preferences
2) Replace the ISBN in one of your records with 9780615352435
3) Now load a local cover image for that record
4) Search for that record (but make sure you're vague enough to have
multiple search results)
5) For a split second, you may notice the local cover image appears before being replaced by a "No Cover Image Available".
Now apply this patch
6) Refresh your search results page
7) You should now see your local cover image, PLUS the "No Cover Image
Available" for the Amazon image, and whatever other graphics/"no
cover image available" "graphics" for the Google Jackets.
To be comprehensive, try the same set of steps using the OPAC Lists
rather than the OPAC Search Results
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In this Patch I added some changes to the rtl.css file
I made some changes in the file opac-bottom.inc and add css
classes to the lang list and I define the class value in
the opac.css
I add If statment to the opac-detail.tt to chose the rtl.css
when rtl lang.
http://bugs.koha-community.org/show_bug.cgi?id=8061
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reformatted commit message and added bug number.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with po files for Arabic from 3.8.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch repairs a few things in templates and CSS to allow
for the injection of right-to-left CSS, also in this patch.
It should apply to 3.8 and master.
To test, install and enable a right-to-left language for the
OPAC, currently Hebrew or Arabic.
The Arabic OPAC translations for 3.6 are mostly-complete, so
they are a good test case.
It's helpful to have a reader of the language handy, but the
layout should be easy enough to figure out, even for
non-readers.
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amended patch adding back author and adding sign off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replicate:
Load the OPAC
You should see "Browse by Subject or Author right below the search box
To test:
Apply patch
Load the OPAC
You should see "Authority search" where "Browse by Subject or Author" was .
Signed-off-by: Mason James <mtj@kohaaloha.com>
Amended patch: change strings in opac-authorities-home.tt
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The datepicker on the OPAC patron entry/update form
(opac-memberentry.pl) doesn't show a calendar icon. This is because
although there is in-page JS to trigger the widget, the page doesn't
include the file which sets some widget defaults, including the path to
the calendar icon and the translatable strings for calendar labels.
This patch simply adds calendar.inc to the template.
To test, load the patron entry/update form (click "personal details" for
an existing patron or a start new patron registration). The date of
birth entry field should show a calendar icon.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Test plan works as described. Looks much better.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the jQuery plugin previously used to display the
library information tooltip on opac-detail.pl and implements the
functionality using jQueryUI's tooltip widget. jQueryUI has been
upgraded to 1.9.2 in the process, which required some ammendments to
jQueryUI-related CSS.
To test, make sure at least one of your libraries has "OPAC info" stored
as part of its configuration. View a record in the OPAC which is owned
by that library. Hover over the library's name in the holdings table and
you should see a properly-positioned tooltip showing the "OPAC info."
Also test other jQueryUI-related functionality to confirm that the
upgrade didn't break anything: Tabs and datepickers should still work
correctly.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely in prog theme, feature seems not to be available
for ccsr yet.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Enable CCSR theme
2) View opac-reserve.pl
3) Note the misplaced background and the broken calendar images
4) Apply the patch
5) Note the background and images now display correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Corrects path to calendar icon.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, if you have nested strong and em tags in the opac, you will only get the properties of the inner tag. This seems to be due to reset-fonts-grids.css resetting the font weight and style (for both strong and em) to normal.
So if you have strong as your outer tag and em as your inner tag, you'll have italics but no bold.
To test:
Before applying the patch...
1) Put <em> and <strong> tags around some text in the opacnav, opac news, opacheader, or any other area of the opac where you can enter html text.
2) Look at the opac and notice that only the inner tag styles are being applied to the text
Apply the patch
3) Refresh the opac (you may need to bypass or clear your browser cache for the new style to pick up)
4) Note that both the inner and outer <em> and <strong> tags are being applied to the text (i.e. your text should be bold and italicized)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Small change that works. No errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
- switch on the OpacHighlightedWords syspref
- search at the opac and intranet a string with a space (e.g.
au,wrdl:"Shakespeare, William" note the double space after the comma)
- without the patch your browser will be frozen during a few seconds,
after applying it, the highlight works better.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When using CSSR theme, opac.css is missing css rules for social networks Facebook, LinkedIn ...
This patch copies css rules related to social netxork from prog theme to cssr theme.
Also copies social-sprite.png image.
Test plan :
- Set CSSR theme : syspref opacthemes=ccsr and opaccolorstylesheet=colors.css
- Set syspref SocialNetworks=Enable
- Go to a detail page at OPAC
=> check that social links are icons : Facebook, LinkedIn, Delicious, Send by email, Google Plus and Tweeter
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Social icons now showing, thanks!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as advertised. OpenLibrary book cover API offers 3 cover sizes: small,
medium, and large. Switch from small to medium, for result page, with
downsizing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves display of OpenLibrary covers in OPAC result list.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Enable ccsr theme
2) Log into update, update personal details
3) Go to mainpage.pl in intranet
4) Note there is no alert for patron modifications
5) Apply patch
6) Repeat step 2-3
6) Note there is now an alert for patron modifications
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Passes tests, tested per test plan, no side effects noted.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Requires PatronSelfRegistration and PatronSelfRegistrationDefaultCategory
to make the form show up.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
check that there is no regression on the opac detail page.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Small patch. No errors
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the ability to add groups to the library select
pulldown on the opac, if it is enabled.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Go to Administration › Libraries and groups
4) Create a new group, or edit an existing one
5) Ensure the 'Show in search pulldown' checkbox is checked
6) Save the group
7) Enable OpacAddMastheadLibraryPulldown if it is not already enabled
8) Load the OPAC, try the group search from the libraries pulldown menu
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Yes! Now this works, and well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
Enable the Persona login
Enable the CCSR theme
Login with a user that worked with the prog theme
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works as described. Tested normal/persona log-in/out.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and gives good feedback (I forgot to add my
email address to the patron at first).
Passes all tests and QA script.
http://bugs.koha-community.org/show_bug.cgi?id=9708
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Problem:
Links between anaytics records were not being displayed for NORMARC setups.
What this patch does:
1. Add indexing for 773 subfield a, w and 9; both for GRS-1 and DOM indexing
(The DOM indexing config was generated from the GRS-1 record.abs)
2. Add "analytics links" to NORMARC XSLT files, both for OPAC and intranet
To test:
- Make sure you have a NORMARC installation
- Set UseControlNumber = Use
- Create a parent record with LDR/07=c. Leave 001 empty.
- In the "Normal" view, do New > New child record and create another record. Do
this twice (so you get a list of hits when you click on the "Show anaytics"
links later on).
- Do the following steps both in the OPAC and the Intranet:
- Search for the parent record in such a way that you can see the record in a
*result list*
- Check that the "Show analytics" link is displayed, and uses the title of the
parent record for linking: ?q=Host-item:<Title of parent record>
- Clik on the "Show analytics" link and check that you get a result list with
the two child records you created earlier
- Go back to the result list and click on the parent record, so you get the
*detail view*
- Check that the "Show analytics" link is displayed, and uses the title of the
parent record for linking: ?q=Host-item:<Title of parent record>
- Clik on the "Show analytics" link and check that you get a result list with
the two child records you created earlier
- Search for one or both of the child records in such a way that you can see
the record(s) in a *result list*
- Check that the "In: <Title of parent record>" link is displayed, and that it
uses the biblionumber of the parent record for linking:
?q=Control-number:<biblionumber of parent record>
- Click on the "In: <Title of parent record>" link, and check that the parent
record is displayed
- Go back to the result list and click on the child record, so you get the
*detail view*
- Check that the "In: <Title of parent record>" link is displayed, and that it
uses the biblionumber of the parent record for linking:
?q=Control-number:<biblionumber of parent record>
- Click on the "In: <Title of parent record>" link, and check that the parent
record is displayed
- Now edit the parent record and put it's biblionumber in 001. Repeat the steps
above, and check that everything still works, but that the links are different:
- The "Show analytics" link on the parent record should look like this:
?q=rcn:<biblionumber of parent record>+and+(bib-level:a+or+bib-level:b)
- The "In: <Title of parent record>" link on the child records should be the
same as it was earlier
- Now set UseControlNumber = "Don't use" and repeat all of the steps above
- All of the links should still be displayed and work, of course
- The "In: <Title of parent record>" link on the child records should look
like this: ?q=ti,phr:<Title of parent record>
- The "Show analytics" link on the parent record should look like this:
?q=Host-item:<Title of parent record>
- Change LDR/07 to "s" and repeat all of the steps above
- Do all of this both for GRS-1 indexing and for DOM indexing...
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It appears that the conversion from HTML::Template to TT
changed noitemlinks to ISSUE.noitemlinks, hence it is being ignored.
This is a problem for SCO kiosks where all the navigation controls
are hidden. Clicking the link means leaving the SCO module and
not being able to get back.
Test plan:
1) Run SCO module, check for item links
2) Apply patch
3) Run SCO module, note that the items no longer have links
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
