Listed in alphabetical order (except for Koha, which is listed
at the start).
Tidy ups and consistency changes:
- end of each entry: remove full stops
- separator between software and license: use a colon
- headings for software/library name: use sentence case
unless a noun, abbreviation, or the actual software name
- http and https: use https where site uses it
- URLs: update where required
- license names: use consistent full names with title case
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch simplifies the language describing third-party libraries and
their licenses so that translation are not so complicated.
The patch also removes information about some assets which are no longer
part of Koha.
The license information now lists only the library name, version (if
possible) and license.
To test, apply the patch and go to the about page in the staff
interface. Open the "Licenses" tab and check the content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Only messages "X new items added" or "No items added" were displayed.
With this patch we will display:
A warning with "No items added"
A warning with "X new items added. Y items not found." when some items
have not been added
A messages "X new items added" when everything went well
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
* Try adding a preset rule that has an operation with different translations
for the column and the pull down (e.g. Outrepasser for fr-CA)
* Without the patch it appears as Custom (e.g. Personnalisé)
* With the patch it appears correctly (e.g. Outrepasser)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Preset column should now display the right preset.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
* Add rules fo different modules and with different settings
* Verify the saved module description for a saved rule matches the pull down
* Verify the saved filter matches the pull downs (especially for source and patron category)
Also:
* Renames 'User category' to 'Patron category'
* Remove some values from translations, that shouldn't be translated, like value attributs for options.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch corrects option value names in MARC overlay rules to prevent
them from being translated.
To test:
1. Install a new language
1.1. In a terminal, run the following commands
gulp po:update
cd misc/translator
./translate install xx-XX
1.2. Go to Administration > Global system preferences
1.3. Search for language
1.4. In the language syspref check the box for the language you just installed
1.5. Save
2. In the staff interface in English, go to Administration > Record
overlay rules
3. In the column 'Preset' try the various options, note that the
'Added', 'Appended', 'Removed', and 'Deleted' settings change depending
on the chosen preset
4. Change the interface language
5. Redo step 3, notice that if the preset name is translated, the other
settings don't change
6. Apply patch
7. Redo step 3, the presets should now change the settings
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Activates standard validation and error messages. Converts from
pattern check to digits class for "display order" field.
To test:
* Compare error message when leaving required fields empty
* Compare error message when entering wrong/false data in display order
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If any of these fields were missing, notably the Numbering formula
then saving the new numbering pattern silently failed, it didn't give
any error but it didn't save any new pattern either.
Note that there is a plan to make description field optional, so even
if it currently is mandatory on the DB level we leave it optional
here (and due to people using production DB's in non-strict mode which
allows this to be optional).
To test:
1) After applying this patch make sure all the 3 fields must be
filled in
/cgi-bin/koha/serials/subscription-numberpatterns.pl?op=new
page and it cannot be saved without those.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The JS function LoadResultsCovers is not used from the Staff interface.
It is supposed to load the local cover images in JS but actually we are embedding the thumbnail in the img tag.
Test plan:
Confirm that LoadResultsCovers was called but had no effect.
Note that the selector ^local-thumbnail only exists in shelfbrowser.inc
but results.js is only used from results.tt (not shelfbrowser.inc)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 31829 made a change to the change password form in the staff
interface to accommodate a gap in the CSS following the staff interface
redesign. This gap has been fixed, so we don't need a double class on
the fieldset.
With this change, the "hint" div can also be put back into place.
To test, apply the patch and locate a patron record in the staff
interface.
- Click the "Change password" button on the patron detail page.
- Confirm that the form layout looks correct.
- Enter mismatched passwords in the "New password" and "Confirm new
password" fields and click "Save"
- The validation error message should be aligned to the right of the
input field.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
To test:
* Go to administration > libraries
* Edit any library
* Verify link texts for UserCSS and UserJS
* Click to edit
* Click to collapse
* Apply patch, restart all
* Verify links have been updated, click removed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. HouseboundModule - disabled
2. CollapseFieldsPatronAddForm, add 'Housebound roles'
3. Edit/create a patron.
4. Notice the useless Housebound roles link at the top of the page
5. APPLY PATCH
6. Try 1 - 3 again, this time no Housebound roles at the top ( Show collapsed fields )
7. Turn on HouseboundModule and make sure it now shows
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Linked system preference in description to cross reference, and
and removed the spaces in the bracketed text.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Clarify that fields will fall back to MarcFieldsToOrder from MarcItemFieldsToOrder.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the vendor issues template so that title and
breadcrumbs follow the same pattern on other updated templates:
Translatable strings in the title and breadcrumbs using the template
WRAPPER.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- Click the "Isssues" link in the sidebar.
- Check that the page title and breadcrumbs are correct in each
variation of the page:
- The main page
- New vendor issue
- Modify vendor issue
- Issue deletion confirmation
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The checkouts table is displayed in the DOM then hidden in JS, then we show it if the cookie is set.
This patch makes the table hidden by default, and show it if/when needed
Test plan:
Check an item out, see the checkouts list view
Play with "Always show checkouts automatically", refresh the page
=> UI should behave better than before this patch
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1 - View a record details page for a record with items
2 - Click on the 'Items' tab
3 - Change 'Bookable' to 'Yes' and update for an item
4 - View the details page - place a booking
5 - Checkout the item to the patron it is booked for
6 - Note the alert shows, but encompasses the whole page
7 - Apply patch
8 - Check in the item
9 - Checkout the item again
10 - Note the alert shows above the checkouts page as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new method to the Koha::Notice::Message class to wrap
content in the same way we currently do at email send time. We then
update the notice preview to use this method so we're embedding
NoticeCSS into that iframe. This means the generated preview should now
exactly match how your notice will display in email clients including
any CSS you may have placed within NoticeCSS.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Fixed typo in POD of html_content
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds conditional formatting based on whether the notice was
generated from an HTML template or a plaintext one. We simply drop the
'html_line_break' filter for the case where the notice should already be
html formatted.
I was tempted to replace the html_line_break for plaintext formatted
notices too as I believe this closer resembles how we actually output
such generated notices.. but I decided that should be for another bug.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
On bug 35284 we added the delay on the column filters using dt's
throttle builtin function.
From doc:
https://datatables.net/plug-ins/api/fnSetFilteringDelay
"""
Please note that this plug-in has been deprecated and the dt-init searchDelay option in DataTables 1.10 should now be used. This plug-in will not operate with v1.10+.
Test plan:
Note that column filtering still work as before (test on different
tables, see bug 35284 for the list)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This page is a single form, all fields must have inputs to avoid data loss/mismatch
To test:
1 - Find a record in the catalog and add or edit items to have one item with a barcode and one without
2 - Place an item level hold on the item with no barcode
3 - Place another hold for a different patron on the item with a barcode
4 - From the holds table add an expiration date to the hold with a barcode and save
5 - Note the hold on the item with no barcode is now on the item with a barcode and the other hold is now a next available hold
6 - Delete the holds
7 - Apply patch
8 - Repeat 2-4
9 - Confirm the itemnumbers for the holds have not changed
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the check for permission to the biblio menu item too.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates several files which use the term "issues" without
context, changing them to "Vendor issues." Unchanged is the vendor
issues page template, vendor_issues.tt, which is updated in Bug 35417.
To test, apply the patch and go to Acquisitions.
- Search for a vendor and view the details.
- You should see a "Vendor issues" link in the sidebar.
- Go to Patrons and search for a patron. View the patron's details.
- Click More -> Set permissions.
- Under Acquisitions management you should see "Manage vendor issues
(issue_manage)"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It's not necessary to label a link with 'click', it being
a link and being formatted as such is enough.
This updates the occurences in the sytem preferences editor.
To test:
* Go to system preferences like OpacUserCSS that allow editing
in a textarea
* Verify link descrptions for editing and collapsing the area
* For a section of grouped system preferences, hover over the
arrow and verify the text for collapsing/uncollapsing the area
* Apply patch, restart all
* Verify the links and tool tips have been updated
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This makes several changes on the form for adding a data provider
and on the data provider details page:
* Enable ERMModule system preference
* Go to the ERM module, add a new data provider
* Look at the labels on the form
* Save and check the labels on the summary tab
* Apply patch, run: yarn build
* Verify fixes
...Id => ID
...sushi => SUSHI
...counter => COUNTER
...Report Release => Report release
...
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bookseller should be vendor to match our preferred terminology.
To test:
* Run:
prove t/db_dependent/Acquisition/GetBasketGroupAsCSV.t
* Add a basket with at least one order line
* Close basket and add to a basket group
* Close the basket group
* Export as CSV
* Verify headers include "Bookseller"
* Apply patch, restart all
* Repeat export, it should now say "Vendor"
* Rerun tests
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Updates ''{cash_register}'' to '{cash_register}'
To test:
I believe this is not actually testable, as cash registers
can only be archived and not deleted?
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The too many checked out message can be very confusing for librarians
when the limit specified is more or less than the number of checkouts
the patron already has. We should make it clear to the librarian that
his is only counting certain types of checkouts by giving them the
issuing rule criteria used.
Test Plan:
1) Apply this patch
2) Try to check out more items than the circ rules allow for
regular and on-site checkouts
Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows the tab key to indent lines as well as trigger autocomplete.
Test plan:
1) Apply patch, navigate to reports and create a new SQL report
2) Click in the text editor and press tab, it should indent and then trigger the autocomplete options
3) Type something to select from the autocomplete box and press tab - it should autocomplete that option
4) Type any word and then press space. Now press tab and it should indent again
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, with the previous 2 patches applied:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on 'View' in front of 'Current renewals'
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item: 39999000003192
6) Repeat 1) to 3). Notice it shows 2 current renewals even tho only 1 corresponds to the currently active check out
7) Renew again. Notice it shows 3 current renewals even tho only 2 correspond to the currently active check out
7) Apply this patch. Notice it now only shows 2 current renewals
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item 39999000003192
6) Repeat 3). Notice it never loads renewals and network console shows HTTP error 400
7) Apply this patch. Repeat the test plan. Notice the 'Current renewals' no longer shows for the item because it is no longer checked out, so whatever past renewals are no longer 'current'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
'Current renewals' is always showing, even if empty.
Test plan:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice all items have the 'Current renewals' label entry, but only the checked out item in step 1) has the 'Current renewals' label entry
5) Apply patch. Notice only the item with current renewals is showing the 'Current renewals' label entry with the respective value.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two preservation module system preferences so that
they offer dropdowns of "Not for loan" values instead of requiring entry
of a specific code.
The patch also adds a missing "." at the end of one preference
description.
To test, apply the patch and restart services.
- Go to Administration -> System preferences.
- Search for "preservation"
- Check that the "PreservationNotForLoanDefaultTrainIn" and
"PreservationNotForLoanWaitingListIn" preferences have dropdowns
offering "Not for loan" values.
- Confirm that your choices are correctly saved.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes some inconsistencies in the record matching rules
administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Some controls on this page have been updated to use Bootstrap link style
with Font Awesome icons added.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Record matching rules
- New record matching rule
- Edit record matching rule
- Delete record matching rule
- Test the process of adding new match points and new match checks,
and removing match points and match checks.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two system preferences, "OPACUserJS" and
"OPACUserCSS" so that the "here" links in the description instead read
"library administration".
To test, apply the patch and go to Administration -> System preferences.
- Search for "opacuser"
- The descriptions of the "OPACUserJS" and "OPACUserCSS" preferences
should include the phrase "...can be defined in library
administration," with "library administration" leading to the correct
page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change displays a warning message instead of the patron image
upload feature in the patron record when the patron is missing the
cardnumber.
Without this change, the staff user can try to upload a patron image
but it will silently fail. This change warns the staff user of the
cardnumber requirement for patron image upload.
Test plan:
0. Apply the patch
1. Enable the "patronimages" system preference
2. Go to http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
3. Click "Add" over the patron image placeholder
4. Note the "Upload photo" button and the ability to take a patron photo if your
device has a camera
5. Remove "cardnumber" from BorrowerMandatoryField
6. Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
7. Edit the patron to remove the cardnumber
8. Click "Add" over the patron image placeholder
9. Note that no patron image upload features appear. Instead, only
a warning appears stating that the patron needs a cardnumber before
the patron image upload can be performed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To reproduce:
1. Open any biblio and edit that record.
(select "Edit record" from the "Edit" drop-down menu).
2. Check that selecting the text in any draggable block input/textarea
fields with a mouse is not possible - it starts dragging instantly.
3. Apply the patch
4. Make sure that draging is activated only when you click
on the "::" icon in front of the dragged item. And text selection
works correctly.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
After importing titles from a list there is a link to the background job
that is displayed.
This link points to /cgi-bin/koha/admin/background_jobs/:id
There is a route to this path in routes/erm.js, to redirect to the
correct URI /cgi-bin/koha/admin/background_jobs.pl?op=view&id=:id
However this link will not work if we are accessing it from outside the
ERM app/module, or if we are opening it in a new tab/window.
The idea was interesting, but does not work...
Test plan:
Create a new ERM local package, a new list (virtual shelf), add some
items to the list.
Go to E-resource management > eHoldings > Local > Titles > Import from a list
Click "import"
Notice the "see job" link and click it
=> Confirm that with this patch applied you can open it in a new tab
without getting a 404
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>