This change adds a mfa_range configuration option for TOTP
to koha-conf.xml, and overrides the "verify" method from
Auth::GoogleAuth in order to provide a new default for "range"
Test plan:
0. Apply the patch
1. koha-plack --restart kohadev
2. Go to
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=TwoFactorAuthentication
3. Change the syspref to "Enable"
4. Go to
http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
5. Click "More" and "Manage two-factor authentication"
6. Register using an app
7. In an Incognito window, go to
http://localhost:8081/cgi-bin/koha/mainpage.pl
8. Sign in with the "koha" user
9. Note down a code from your Authenticator app
10. Wait until after 60 seconds and try it
11. Note it says "Invalid two-factor code"
12. Try a new code from the app
13. Note that it works
14. Add <mfa_range>10</mfa_range> to /etc/koha/sites/kohadev/koha-conf.xml
15. Clear memcached and koha-plack --restart kohadev
16. Sign in with the "koha" user
17. Note down a code from your Authenticator app
18. Wait 4 minutes and then try it
19. Note that it works
20. Disable your two-factor authentication and click to re-enable it
21. Use a code older than 60 seconds when registering for the two
factor authentication
22. Note that the code works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6a0955946e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Solutions inLibro started formating its repository to be found by Bug
23975. This patch adds it to the default list in the config template.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c8452e55fb)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
We already tested it. Just look at changes in this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the default partner category used by the partner_code config to be in line with sample data in sample_patrons.yml
Preparation:
Apply patch
Enable ILLModule sys pref
Install an ILL backend (e.g. FreeForm)
Add this change to your koha-conf.xml
Flush, restart.
Search for patron of category inter-library loan and assign a primary e-mail address to it
Test plan:
Create an ILL request and click 'place request with partners'
Verify that the 'select partner libraries' has the correct patron of IL category
Run tests and ensure they pass:
prove t/db_dependent/Illrequest/Config.t
prove t/Koha/Config.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now background_jobs_worker.pl only processes jobs in serial. It would make sense to handle jobs in parallel up to a user definable limit.
Test Plan:
1) Apply this patch
2) Stop background_jobs_worker.pl
3) Generate some background jobs by editing records, placing holds, etc
4) Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5) Run background_jobs_worker.pl with parameter -m 3 or some other
number of max processes
6) Note the multiple forked processes in the ps output
Test notes - also tested the following on KTD:
1. Stop background_jobs_worker.pl
2. Edit /etc/koha/sites/kohadev/koha-conf.xml - set max_processes to 10
3. Generate some background jobs
4. Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5. Restart all
6. Confirm multiple forked processes in the ps output
Both methods work as expected and generate multiple forked processes
based on the value set for max processes.
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds <zebra_connection_timeout>30</zebra_connection_timeout>
to the koha-conf.xml file.
Sometimes, a Zebra search might take longer than 30 seconds. If it does,
Koha will say that 0 records have been found. While slow searching
is not desirable, it's more desirable to get the result set regardless.
Test plan:
0. Apply patch
1. Add <zebra_connection_timeout>.1</zebra_connection_timeout> to
your relevant koha-conf.xml file (e.g. /etc/koha/sites/kohadev/koha-conf.xml)
2. echo 'flush_all' | nc -q 1 memcached 11211
3. koha-plack --restart kohadev
4. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
5. Note that no results are returned
6. Change zebra_connection_timeout to 30
7. echo 'flush_all' | nc -q 1 memcached 11211
8. koha-plack --restart kohadev
9a. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
9b. Note that 3 results are returned
10. Remove zebra_connection_timeout from koha-conf.xml
11. echo 'flush_all' | nc -q 1 memcached 11211
12. koha-plack --restart kohadev
13a. Go to http://localhost:8081/cgi-bin/koha/catalogue/search.pl?q=test
13b. Note that 3 results are returned
14. Celebrate
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested by Jonathan, we need more flexibility ;)
Here it comes.
Test plan:
Run t/CookieManager.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Add this change to your koha-conf.xml.
Flush, restart.
Test if the cookie is kept now in the interface.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As requested on comment99. Personally I do not feel that it
should be a requirement for adding a koha-conf entry though.
Note that koha-create does/did not even support adding multiple
line entries to koha-conf like we do here now.
But it might be a start for adding them?
Test plan:
The following tweak might help you to test without running the
complete koha-create, while still convincing you:
[1] cp debian/templates/koha-conf-site.xml.in /etc/koha/test.conf
[2] Add the following line in debian/scripts/koha-create. Append
if after the BCRYPT_SETTINGS= line on L652:
generate_config_file test.conf test.xml; exit
[3] Run debian/scripts/koha-create --keep-cookie A
[4] Check if you see <do_not_remove_cookie>A<..> in test.xml.
[5] Run debian/scripts/koha-create --keep-cookie A --keep-cookie B
[6] Check for two lines in test.xml
[7] Run debian/scripts/koha-create clone_name
[8] Check that the __KEEP_COOKIE__ line is gone in test.xml.
[9] Undo the tweak by removing test.xml and /etc/koha/test.conf,
and removing the added line from koha-create.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Just comments. Nothing to test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: using new name for deny list.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The connection details for the message broker should be configurable.
This patch adds configuration options to koha-conf.xml. If they
are not specified, then default connection details will be used.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is not used as far as we know and it's not known to work.
It's preferable to remove it.
Test plan:
Make sure the OpacGroupResults pref code is removed, as well as the
PazPar2 files and code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Theke Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added by bug 22705, but only in etc/koha-conf.xml
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an entry to koha-conf.xml for setting a default SMTP
server config. 'koha-create' gets option switches for all options.
To test:
1. Use the tweaked script to crete a new instance
2. Notice it contains entries for smtp_server and they respect your
options.
3. If you don't choose any option, it sets the current default.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This takes care of more occurences of staff client and changes it to
staff interface, including in code comments.
To test:
- I think in this case careful code review is what we look for.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
to test...
1/ attempt to install koha 20.05 package on deb11, fail :'(
2/ apply patch and build new koha package
3/ attempt to install new koha package on deb11, succeed!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As promised, I am commenting out the configuration for git repositories
to use for searches by default prior to release. To enable the feature,
simply uncomment the relevant github repositories or add your own.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The line for enabling the unsafe expand_entities option is commented
and includes a warning to keep it like that ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It would be nice to be able to search and install plugins directly from GitHub ( and GitLab if possible ). This would make it easier to verify the authenticity of plugins and make discovering new plugins easier as well as making installation of plugins simpler.
Test Plan:
1) Apply this patch
2) Add the new block for plugin_repos to your koha-conf.xml
3) Restart all the things!
4) Browse to the plugins home page
5) Try searching for 'patrons' in the new search box
6) Verify you get results!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the last development meeting we have voted to remove the
QueryParser-related code
https://wiki.koha-community.org/wiki/Development_IRC_meeting_19_February_2020
Hea tells us that it has not been adopted, and the code/bug tracker that
it is not really usable as it. As nobody is willing to work on it, we
decided to remove it instead.
Test plan:
% prove t/db_dependent/Search.t
must return green
See commits from bug 9239 and confirm that the code is removed in this
patch.
Also play with the search on the UI and confirm that you do not see
obvious regressions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the --elasticsearch-server option switch to koha-create.
It allows choosing a different Elasticsearch configuration. It defaults
to the current 'localhost:9200' value.
To test:
- Apply this patches
- Run:
$ reset_all
$ man koha-create
=> SUCCESS: The man page shows correct information about the added
option switch
- Run:
$ sudo koha-create --create-db test
=> SUCCESS: /etc/koha/sites/test/koha-conf.xml contains the default
value (i.e. the current behaviour is kept)
- Run:
$ sudo koha-create --create-db --elasticsearch-server tomas:1234 test2
=> SUCCESS: /etc/koha/sites/test2/koha-conf.xml contains the passed
value in the <elasticsearch><server> section.
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing entries are added to those files.
Test plan:
Search for typos
Compare the two files and comfirm the entries are the same in both.
Exception: supportdir exists in etc/koha-conf.xml only, but I think it's
obsolete.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha has a number of features that rely on knowing the IP address of the connecting client. If that server is behind a proxy these features do not work.
This patch adds a module to automatically convert the X-Forwarded-For header into the REMOTE_ADDR environment variable for both CGI and Plack processes.
TEST PLAN:
1) Apply this patch set
2) Install Plack::Middleware::RealIP via cpanm or your favorite utility
3) Update your plack.psgi with the changes you find in this patch set ( this process differs based on your testing environment )
4) Restart plack
5) Tail the plack error log for your instance
6) Use curl to access the OPAC, adding an X-Forwarded-For header: curl --header "X-Forwarded-For: 32.32.32.32" http://127.0.0.1:8080
7) Note the logs output this address if you are unproxied
8) If you are proxied, restart plack using a command like below, where the ip you see in the logs ("REAL IP) is what you put in the koha conf:
<koha_trusted_proxies>172.22.0.1 1.1.1.1</koha_trusted_proxies>
9) Restart all the things!
10) Repeat step 6
11) You should now see "REAL IP: 32.32.32.32" in the plack logs as the remote address in your plack-error.log logs!
12) Disable plack so you are running in cgi mode, repeat step 6 again
13) You should see "REAL IP: 32.32.32.32" as the remove address in your opac-error.log logs!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing installer for debian packages.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The default for Zebra is to not return results where the record size is
greater than 1045 KB ( 1 MB ). Some libraries need to increase this
ceiling, but it may come at a cost with z39.50 compatibility with other
services. For that reason, we should make this setting configurable on a
per-instance basis.
Test plan for kohadevbox:
1) Apply this patch
2) Run:
$ reset_all
3) Restart Zebra:
$ sudo koha-zebra --restart kohadev
4) Check how zebrasrv was called:
$ ps waux | grep zebrasrv
=> SUCCESS: Looks like
... /usr/bin/zebrasrv -v none,fatal,warn -k 1024
5) Edit /etc/koha/sites/kohadev/koha-conf.xml, add:
<zebra_max_record_size>2048</zebra_max_record_size>
6) Repeat (3) and (4)
=> SUCCESS: Looks like
... /usr/bin/zebrasrv -v none,fatal,warn -k 2048
7) Sign off :-D
General test plan:
1) Apply this patch
2) Build a Debian package
3) Specify a zebra_max_record_size of 2048 in your koha_conf.xml
4) Restart zebra
5) Index a record greater than 1 MB but smaller than 2 MB
6) Note that it is searchable!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Since we now require the <branch> block, we should add it to the config
templates
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 20073: Move Elasticsearch yaml files back to admin directory
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This reverts commit f489d2034b.
This commit breaks the install process when using debian packages.
Reverting as we are very close to the 18.05.00 release
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to the koha-conf.xml file for specifying
a temporary uploaded files directory.
The koha-create script is adjusted to handle it and a convenient option
switch is added. If ommited, it will default to
/var/lib/koha/<instance>/uploads_tmp.
koha-create-dirs is patched to create the required directory with the
right permissions.
The docs get the new parameter documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a --timezone switch to koha-create so the timezone can
be set on creation time. It defaults to empty (i.e. using the server's
local time).
To test:
- Create an instance:
$ sudo koha-create --create-db timezone1
=> SUCCESS: /etc/koha/sites/timezone1/koha-conf.xml contains an empty
<timezone> entry.
- Apply this patch
- Run:
$ perl misc4dev/cp_debian_files.pl
- Create a new instance:
$ sudo koha-create --create-db timezone2
=> SUCCESS: /etc/koha/sites/timezone2/koha-conf.xml contains an empty
<timezone> entry (i.e. the current behaviour is preserved).
- Create a new instance:
$ sudo koha-create --create-db --timezone Your/Timezone timezone3
=> SUCCESS: /etc/koha/sites/timezone3/koha-conf.xml contains
<timezone>Your/Timezone</timezone> (i.e. introduced behaviour works)
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Removed merge marker
- Changed include path in favor of using the Asset tt plugin (bug 20538)
- Changed access_dir to a two-level entry for clarity
Test plans stay the same, just make sure that the two-level configuration entry
work properly and everything pass QA.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This squash contains all of these commits:
- Adds a page to access log files on the server from the intranet
- Update ID to allow for permalinking
- Rename config to "'accessdir' and fix qa
- Allows for multiple directories to be accessible
- Update the link under reports
- (Follow-up) Fixing merge error and cosmetic changes
- (Follow-up) Fix tab chars and move javascript to the footer
- (QA Follow-up) Fix datatable
- Make filename unicode-proof, renamed accessdir to access_dir and fix update
Test plans:
- Apply patch, update database
- Add to koha-conf:
<access_dir>/tmp/koha-public/one</access_dir>
<access_dir>/tmp/koha-public/two</access_dir>
<access_dir>/tmp/koha-public</access_dir>
- Create these directories ( mkdir /tmp/koha-public , etc...)
- Create these files:
echo "hello world!" > /tmp/koha-public/❤
echo "test" > /tmp/koha-public/one/samename.txt
echo "this is not the same" > /tmp/koha-public/two/samename.txt
- Login as Superadmin, go to tools > reports files
- Click on ❤, make sure it's downloadable and readable
- Click on both samename.txt, look inside and make sure the file is different
- Login as NON-superadmin. Go under tools, see no Report/Log under the third column
- Go to add tools/access_file permission to user
- See new entry under tools third column.
- validate link is ok.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
