This patch adds handling for those 2 particular cases:
1. Deleting the expected issue
2. Deleting a serial and it's item, but one item cannot be deleted
To test:
1.1 Create a subscription that creates items
1.2 Receive two issues
1.3 Use the new button to delete the 'Expected' issue
1.4 The issue is correctly deleted, but the new expected issue created
to replace the one which has been deleted don't have a published or
received date and is show in it's own tab.
1.5 Apply patch
1.6 Repeat steps 1.1 through 1.4
=> The new expected issue is created correctly
2.1 Use the same serial as in 1 or repeat step 1.1 and 1.2
2.2 Check out one of the items
2.3 Delete the corresponding serial and check box to delete items
2.4 The serial is deleted, but not the item.
=> No feedback is show to the user
2.5 Apply patch
2.6 Repeat step 2.1 through 2.4
=> As before, the serial is deleted, but not the item
=> This time, an error is shown to inform the user
Signed-off-by: sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This new feature allows for batch deletion of serials through the UI. The current usage is a one-by-one long game.
Test plan :
- Apply patch.
- Create at least four serials with items.
- Notice that new items have a numbering pattern and a date in the enumchron field.
- Use the button Delete selected issues for the following steps.
- Delete a serial and its associated item.
- Confirm the serial and item are gone.
- Delete a serial and not its item.
- Confirm the serial is gone.
- Confirm the item is still there and the date part in the enumchron field is gone.
- Delete the two lasts serials.
- Confirm they are gone.
Sponsored-by: CCSR
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This should have no visible effect on the templates as the
information the grep changes is not used in the template.
It's also strange, that these lines existed, as
GetSubscriptionsFromBiblionumber contained the same changes.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Arthur Bousquet <arthur.bousquet@inlibro.com>
Signed-off-by: Nadine Pierre <nadine.pierre@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I have removed publisheddatetext as a param from my patch, but only in
the places where my patch added it. Any other instance already existed
before my patch.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch ensures the routing notes are carried over when generating
the next serial.
To test:
1) Create a routing list for a subscription
2) Add a borrower and a note to the routing list
3) Generate the next serial (serials-collection.pl)
4) Edit the routing list to see the notes
5) Note that the notes have disappeared
6) Apply patch
7) Edit the routing list, add a note
8) Generate the next serial
9) Edit the routing list and confirm the note is still there
10) Confirm you are still able to edit serials (serials-edit.pl) and
routing notes stay
Sponsored-by: Plant and Food Research Limited
Signed-off-by: Nazlı Çetin <nazli@devinim.com.tr>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- add a class SharedContent.pm to communicate with Mana-KB server
- add a link in serials-menu.inc to serials_search.pl to open
a mana-subscription research form
- modify the research form in serials-search.tt to show the right fields
for Mana-KB
- create datatable in mana-subscription-search-result.inc to show
results from a research on Mana-KB
- modify serials-search.pl to manage research on Mana-KB
- add a mana_id to subscription table
- add a share button on serials-toolbar.inc and a modal to ask
the language of the share and to alert if the subscription is
already link to a Mana-KB subscription model
- add function in C4/Serials to get all the info for a subscription
sharing
- modify subscription-detail.pl to manage sharing to Mana-KB
- modify subscription-add.tt and subscription.pl to manage a
import from Mana-KB during a subscription creation
- add 2 script in svc for ajax calling from subscription-add.tt
to communicate with Mana-KB server during a asubscription creation
- add a function in Subscription.pm to have all the info for a Mana-KB research
from a biblionumber
- modify functions used by subscription-add.pl in C4/Serials to manage a
frequency which came from Mana-KB server and not already created on the
koha database, and modify the tests of the said functions
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The idea of output_and_exit_if_error (added by bug 18403) is to make sure
parameters are valid before executing the script.
If not (old or broken URLs), we shortcut everything coming next to display a
generic error ("object does not exist", "you do not have permission to do that", etc.)
This bug report fixes the scripts under serials/*.
Test plan:
Hit the script under the serials directory with an invalid subscriptionid parameter
and confirm you get an error instead of the normal view with empty values.
The goal is not to be exhaustive during the first iteration, but at least to fix
the most common views.
For instance:
/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=XXX
/cgi-bin/koha/serials/serials-collection.pl?subscriptionid=XXX
/cgi-bin/koha/serials/routing.pl?subscriptionid=XXX&op=new
/cgi-bin/koha/serials/subscription-add.pl?op=modify&subscriptionid=XXx
/cgi-bin/koha/serials/subscription-add.pl?op=dup&subscriptionid=XXX
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When receiving several issues for a subscription (Serials > Serial
collection > Multi receiving), the reception date is always identical to the
publication date.
In some use cases we would like to set this "date received" value to
today.
Note: "date received" refers to the DB column serial.planneddate
To make this possible this patch replaces the JS prompt with a modal
dialog asking for
1. the number of issues to receive
2. if the received date must be set to today
Ergonomic note: bootstrap styled buttons are used, but they do not display correctly
We may need to improve that (later)
Test plan:
- Receive 1 or more serials using the "Multi receiving" buttons
Note that this button appears twice, on the "serial collection
information" and the "serial edition" pages
- Try with and without the new checkbox ticked and confirm the behaviour
is correct (i.e. date received is set to today or set to the publish
date)
- Make sure "Edit serials" and "Generate next" buttons still work as
before
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Check that use strict; use warnings; doesn't exist in the following
files and use Modern::Perl; is written instead.
acqui-search-result.pl
acqui-search.pl
checkexpiration.pl
reorder_members.pl
routing-preview.pl
routing.pl
serials-collection.pl
serials-edit.pl
subscription-add.pl
subscription-bib-search.pl
subscription-renew.pl
viewalerts.pl
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to Serials, find a serial with more than one subscription
2) Click Serial collection
3) Notice how Frequency and Numbering pattern are filled out correctly
4) Click 'see any sub attached to this biblio'
5) Notice how Frequency and Numbering pattern are now missing info
6) Apply patch and refresh page
7) Confirm Frequency and Numbering pattern now show as expected
Sponsored-by: Catalyst IT
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to Serials -> search for a subscription
2) Add a new routing list for a subscription
3) After saving, you should be redirected to the subscription detail
page
4) Click Serial collection on the left sidebar menu
5) Notice there is a button that says 'Edit routing list' next to this
subscription in the first table
6) Click 'See any subscription attached to this biblio' link
7) Notice it no longer says edit next to this subscription, it says
'Create routing list'
8) Apply patch and refresh page
9) Should now show 'Edit' button like expected
Sponsored-by: Catalyst IT
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
From C4::Koha::GetAuthorisedValues
# TODO: the "selected" feature should be replaced by a utility function
# somewhere else, it doesn't belong in here. For starters it makes
# caching much more complicated. Or just let the UI logic handle it, it's
# what it's for.
Indeed, it's not a job for a subroutine, the template should take care of that.
Note that a perf gain could be won with this patch \o/
Test plan:
- Edit an itemtype and check the value of the "Search category" dropdown list
- Edit a patron attribute type and check the value of the "Class" dropdown list
- Detail for a catalogue record, the Status column should be correctly
populated if items are damaged and/or lost
- Item details for a catalogue record, the lost, damaged and withdrawn
value should be correctly displayed
- Edit a patron, the "street type" should be correctly selected
- Create a patron attribute type linked to an authorised value list.
- Edit a patron, set a value for this attribute, edit it again. The
correct value should be selected.
- Search for subscriptions. The 'Location' dropdown list should behave
correctly (select the entry you have choosen before, etc.)
- Edit a subscription, the location dropdown list should select the
correct value.
- Edit and view a suggestion with a 'reason for suggestion' set (you
should have at least 1 OPAC_SUG AV defined)
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Warning: This area is a mess, especially with date management.
For the same reasons as other "Remove C4::Dates from*" patches, this one
will deal with the serials module.
Note that this patch add the datepicker on 3 input fields (on
serials/subscription-detail.tt and serials/subscription-renew.tt).
There was also weird behavior when the dates were invalid. Now default
to undefined. But with the datepicker it will reduce the number of
cases even if the user is still allowed to fill invalid dates.
Test plan:
1/ Create a subscription, fill the first issue pub date and the
subscription start date.
You can fill or not the end date.
Play with the numbering pattern and confirm that there are generated as
before this patch.
2/ On the check expiration page, confirm that the dates are correctly
displayed.
3/ Renew the subscription and confirm that the behavior is correct.
4/ Go on the subscription history page and confirm you have now the
datepicker plugin set on the 2 date fields.
QA notes: The startdate, histstartdate and enddate are not used in
the serials-collection template, this patch removes them from the pl
script.
Tested on top of 15166 15168 15171, full browser reload for date pickers.
Note for 4/: It is the link in tab planning on subscription
detail page, near "Manual history" (if manual history is enabled).
Works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a new field serial.publisheddatetext for displaying published date
in another format that dateformat syspref permit.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When a subscription has no routing list yet, the page
serials/subscription-detail.pl shows in left menu : "Create routing list".
In serials/serials-collection.pl page, the link in table is always
"Edit routing list", even when there is no routing list.
This patch adds a conditionnal link "Edit routing list"/"Create routing
list" into serials/serials-collection.pl page.
Test plan :
- Create a subscription no. 1 without routing list and a subscription
no. 2 with a routing list
- Go to serials/serials-collection.pl of subscription no. 1
=> You see "Create routing list" link
- Click on link
=> You see "Create routing list for"
- Go to serials/serials-collection.pl of subscription no. 2
=> You see "Edit routing list" link
- Click on link
=> You see "Edit routing list for ..."
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Functional and automated tests pass. Passes koha-qa.pl.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
With the patch applied the serial collection page shows the
right link depending on the existance of a routing list.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds
- 2 links in the table header (select all and clear all).
- Datatable on these tables
Test plan:
Try to select all serials for a year and receive them.
Test there is no regression (ergonomic) on this page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 8715 [Follow-up] Receiving all serials for a year
Follow-up: For consistency, I would prefer to have the
column of checkboxes at the beginning of the table and the
select/clear links above.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 8715: Force the default sort order to desc
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
- system preference RoutingSerials and user permission routing
should be taken into account
- print routing list should be independent from routing permission
To test, compare to master and check:
1) If system preference RoutingSerials is OFF, routing list functionality is
not visible in the templates.
2) If system preference RoutingSerials is ON, but user doesn't have routing
permission, routing list functionality is not visible in templates,
with exception of 'print list' on the serial collection page.
3) If system preference RoutingSerials is ON and user has routing permissions,
all routing links are visible (serial collection, serials navigation,
result list of serial search)
Additional changes:
Changed labels on templates to match HTML4 rule from coding guidelines.
http://wiki.koha-community.org/wiki/Coding_Guidelines#Upper_and_Lower_cases_in_strings
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Corrects templates to use permission receive_serials.
Before patch:
1) Serial receive page (/cgi-bin/koha/serials/serials-edit.pl...)
can only be accessed with full serials permissions.
When one permission is missing, page can not be accessed.
2) Serial collection/Issue History page (/cgi-bin/koha/serials/serials-collection.pl...)
can only be accessed with full serials permissions.
After applying patch:
1) Serial receive page can only be accessed when user has receive_serials
permission.
2) Edit and serial receive links are hidden, when user doesn't have
serials_receive permission. Page is accessible with at least 1 serials
permission.
I will send a another patch to correct behaviour for the routing permission.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To be tested together with
http://bugs.koha-community.org/bugzilla3/attachment.cgi?id=6690
1) Create a subscription for a title
- check the link 'Show any subscription...' doesn't show now
- check the serials collection page works correctly and shows all
necessary information
2) Create a second subscription for the same title
- check a new link 'Show any subscription...' shows up now
- use links in the issue table to change between viewing the single subscription
and the overview page
- check it works correctly and all information shows up
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
It works. With this patch, on Serials Collection page, the link, 'See any
subscription attached to this biblio' appears only when there are more than one
subscription attached to the biblio record.
Don't display link to the serial, when the collection page displays just
one subscription. Display it when several subscriptions. Alway display a
link for displaying biblio record other subscriptions.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works nicely, but always shows link to 'any subscriptions'.
I did a follow-up so the link would only show if there was more
than 1 subscription for the record.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Don't display junk in empty fields
Don't generate errors
Merged some changes to make variable names moremeaningful in loops ( within loops)
Thanks to M De Rooy for spotting a couple of issues in the original patch
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
As a consequence of previous MT3667 patch, the subscriptionid list was processed.
And unfortunately, since array order is the only relevant information from HTML processing,
it caused subscriptionid to be null for a double edition.
This patch only uses uniq for serials-collection and when passing information to serials-collection page.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Add use warnings where not present
Remove unused variables
Avoid redeclarations of variables
trailing spaces trimmed
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Remove some superfluous variables
Simplify some loops over lists
Fix generated warnings
Strip whitespace from line endings
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch change the operations, it add a new expected if no one expected exists, else it create new excepted, and set the others as "late"
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch add a button in "Serial Collection" to add manually the next issue. And improve the function GetNextExpected
to retrieve at least something.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
