Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows checkouts to be processed via SIP even when
the item is already checked out to a user.
Test plan:
0) Apply the patch
1) koha-sip --stop kohadev
2) koha-sip --start kohadev
3) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron koha --item 39999000001310
4) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron 23529000035676 --item 39999000001310
5) Note the output includes "AFItem checked out to another patron"
6) Enable system preference "AllowItemsOnLoanCheckoutSIP"
7) misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkout --patron 23529000035676 --item 39999000001310
8) Note the output no longer includes "AFItem checked out to another patron" and the item has been checked out to patron 23529000035676
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Some users would prefer that the libraries link not appear in the menu
of links under the OPAC's main search bar. This patch adds a preference
to do so.
The preference defaults to "On" since "On" is the current default
behavior.
To test, apply the patch and run the database update prcoess.
- In the OPAC, confirm that by default the "Libraries" link appears.
- In the staff interface, go to Administration -> System preferences ->
OPACShowLibraries
- Set the preference to "Don't show"
- Return to the OPAC and confirm that the "Libraries" link isn't there.
- Try to navigate directly to /cgi-bin/koha/opac-library.pl. You should
be redirected to a 404 page.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Part A: New installation
1. Start a fresh test instance
2. Set EmailFieldPrimary to "selected addresses", and do not touch
EmailFieldSelection
3. Edit a patron to ensure the following fields are set:
- Primary email
- Secondary email
- Alternate email
- Enable email notices for item checkout
4. Attempt to check an item out to that patron
--> Koha explodes!
5. Apply patch
6. reset_all
7. Repeat steps 2-4
--> Checkout succeeds!
8. Ensure test plan for bug 12802 still passes
Part B: Upgraded installation
1. Start a fresh test instance at version 23.11
2. Switch to main
3. Install database update
4. Set EmailFieldPrimary to "selected addresses", and do not touch
EmailFieldSelection
5. Edit a patron to ensure the following fields are set:
- Primary email
- Secondary email
- Alternate email
- Enable email notices for item checkout
6. Attempt to check an item out to that patron
--> Koha explodes!
7. Go back to 23.11 and reset_all
8. Switch to main and apply patch
9. Repeat steps 4-6
--> Checkout succeeds!
10. Ensure test plan for bug 12802 still passes
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Like IncludeSeeFromInSearches adds see from heading in search (4xx),
new system preference IncludeSeeAlsoFromInSearches adds see also from heading (5xx).
Test plan:
Test on both Elasticsearch and Zebra:
1)
1.1) Create an authority record with heading, see from heading 4xx and see also from heading 5xx
1.2) Use this authority in a biblio record
2)
2.1) Set IncludeSeeFromInSearches and IncludeSeeAlsoFromInSearches to "Don't include"
2.3) Rebuild search engine
2.4) Perform a search on heading text => you find the biblio record
2.5) Perform a search on see from heading => you do not find the biblio record
2.6) Perform a search on see also from heading => you do not find the biblio record
3)
3.1) Set IncludeSeeFromInSearches and IncludeSeeAlsoFromInSearches to "Include"
3.2) Rebuild search engine
3.3) Perform a search on heading text => you find the biblio record
3.4) Perform a search on see from heading => you find the biblio record
3.5) Perform a search on see also from heading => you find the biblio record
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Websites must have a robots meta tag to improve search engine crawling,
so we could tell search engines to not index OPAC pages for example.
To test:
1) Look at opac-main source and see that meta name=robots is missing.
2) Apply patch.
3) Run ./installer/data/mysql/updatedatabase.pl
4) Go to system preferences > OPAC and add some directives to
OpacMetaRobots (ex: noindex,nofollow).
5) Look at opac-main source and confirm that meta name=robots now has
content equal to the text set in the OpacMetaRobots system
preference.
6) This should Prevent search engines from indexing Opac pages (if
OpacMetaRobots is set to noindex)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the IntranetmainUserblock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the IntranetmainUserblock
system preference before applying the patch. Apply the patch and run
the database update process.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from IntranetmainUserblock is now stored there.
- The HTML customization entry form should offer IntranetmainUserblock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Edit the IntranetmainUserblock HTML customization and add unique
content to the "fr-FR" tab.
- Go to the staff client home page. You should see the
content you added to the IntranetmainUserblock HTML customization.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"IntranetmainUserblock." It should return no results.
Sponsored-By: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch, restart services, updatedatabase
2. Search for the system preference 'SuggestionsLog', it should be off.
Turn it on.
3. Create a purhase suggestion
4. Go to Tools > Log viewer. In modules check 'Suggestions'
5. You should see your newly created suggestion.
6. Modify the suggestion and check the logs again, the modification
should be logged.
7. Delete the suggestion, the deletion should be logged.
8. Do a purchase suggestion via the OPAC.
9. Check the logs to see the newly created suggestion, the interface
should be OPAC.
10. Turn of SuggestionsLog
11. No changes of any kind should be logged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Ray Delahunty <lib-systems@arts.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I created a new system preference, SMSSendMaxChar, which allows you to set a limit for the number of characters in SMS messages to send. When a limit is set, messages that exceed it will be trimed.
TEST PLAN
1) Apply the patch
2) Run prove t/db_dependent/Letters.t
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is a squash of several improvements:
- Override weird blue color being applied from MultipleSelect when all options from an optgroup are selected;
- Fix input width depending on selected value. Now it should always be same width regardless;
- Updated the system preference UI wording to reflect new behavior;
- Updated UI labels in the patron category edit page to enforce that the actions being selected are "actions to be blocked"
- Corrected sysprefs.sql entry
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch also renames StaffLoginBranchBasedOnIP to
StaffLoginLibraryBasedOnIP to be consistent with our terminology
guidelines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch sets AutoLocation to be called StaffLoginRestrictBranchByIP.
The new name is chosen to reflect the new pref StaffLoginBranchBasedOnIP.
Also this patch corrects the order of sysprefs in installer file.
To test:
Follow test plans on bug 36665 and bug 35890 and confirm that the preferences
continue to work as expected
Confirm the descriptions of the prefs in the staff interface match the behaviors expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
While this is a new preference, this was the standard behavior for a long time. I think we should
default to enabled to restore previous behavior.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system preference StaffLoginBranchBasedOnIP which restores the behaviour before bug 35918
of using the current IP to determine the user's logged in branchcode
To test:
1 - Get your current ip
2 - Set that IP for a library in the administration section
3 - Find a user account assigned to a different library that can login to staff side
4 - Login to staff as that user, select 'My library'
5 - You are logged in to the user's branch
6 - Apply patch, restart all
7 - Log out and back in, selecting 'My library'
8 - You are logged in to the user's branch
9 - Enable new system preference StaffLoginBranchBasedOnIP
9 - Log out and back in, selecting a different branch, noting the new warning below the library selection
10 - You are logged in to the branch with the matching IP
11 - Log out and back in, selecting 'My library'
10 - You are logged in to the branch with the matching IP
11 - Change your logged in branch
12 - Verify the selection sticks and you can perform staff actions in the chosen branch
13 - Change the IP of the library to one that doesn't match yours
14 - Verify you can log out and log back in and that selected branch is respected when your IP doesn't match library IP
Signed-off-by: Kristi Krueger <KKRUEGER@cuyahogalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a "title notes tab" option to the opacSerialDefaultTab
preference.
To test, apply the patch and restart services.
- Go to Administration -> System preferences -> opacSerialDefaultTab.
- There should now be a new options, "title notes tab."
- Set the preference to the new value.
- Go to the OPAC and locate a bibliographic record which is associated
with a subscription and which has data in a 5XX notes field.
- On the bibliographic detail page the "Title notes" tab should be
selected by default.
- Test that the other system preference values still work correctly too.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
So that this functionality can be controlled separately from staff-side batch checkouts
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Update the preference name from 'Borrower' to 'Patron' and correct
spelling of receive.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Configure Claims returned
1. Go to Administration > Authorized Values > LOST
2. Add a new authorized value with value:6 and description:Claims returned
3. Go to Administration > System Preferences
4. Set ClaimReturnedLostValue to 6 and save
2. Check out an item to a patron.
1. Mark the item as claim returned
2. Check the item in.
3. A message stating that the item has been claimed as returned pops up with
an option to resolve.
4. Resolve the claim.
3. Check out the item to the patron again.
1. Mark the item as claim returned.
2. Check out the item to a new patron. Select “Yes, check out”
3. Go back to the previous patron. Notice that their claim was not resolved.
4. Apply the patch.
1. Updatedatabase
2. restart_all
3. Go to the system preferences and set the system preference
‘AutoClaimReturnStatusOnCheckin’ to ‘Returned by patron’
4. Set ‘AutoClaimReturnStatusOnCheckout’ to ‘Found in library’
5. Redo step 2
1. When checking the claim returned item in you will now see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Returned by patron’
6. Redo step 3
1. Upon checking the item out to another patron you will see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Found in library’.
7. Sign off and have a wonderful day!
Sponsored-by: Altadena Library District
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch implements two new system preferences, "UpdateItemLostStatusWhenWriteOff" and "UpdateItemLostStatusWhenPaid" that allow you to specify the status to change an item to when the outstanding balance of a lost item is paid or written off. These preferences are tied to the LOST authorised values set.
Test Plan:
- Set one of the system preference to any of the available values
- Set an item as lost
- Make a manual invoice for your desired user and assign it to the barcode of the above item
- Save and Pay
- Select Pay/Write Off depending on the system preference you selected above
- Pay
- Note that the status of the item has changed to the status you set with the system preference
- Repeat for all values of both system preferences
- Check that when the system preference is left blank and no option is chosen, the lost status does not update.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
These patches allow the display of checkboxes instead of radio buttons for placing specific
item holds in the OPAC and staff interface. This display is controlled by the system preference
'DisplayMultiItemHolds'. When disabled, the hold display is the same as in the past. When enabled,
the user can select multiple items to place holds on at the same time.
If there is an error placing one or more holds, an error will display on the following screen.
Test plan:
0. Apply the patches and koha-plack --reload kohadev
1. Enable 'DisplayMultiItemHolds' syspref
2. In staff interface, go to a record with multiple holdable items
3. Check the boxes next to 2+ items and click the button to place the holds
4. Note that the holds are all placed (unless there is a failure)
5. Cancel the holds, and try again (but this time make Holds per record (count) only
1 in the circ rules)
6. Note that one of the holds is placed, but the others are not and an error message
is displayed saying that one or more holds could not be placed because the holds per
record was exceeded
7. Perform the same above procedure on the OPAC
8. If DisplayMultiPlaceHold is enabled, you can test placing multiple specific item holds
across multiple bibs in the OPAC via the search results
9. If EnableItemGroups and EnableItemGroupHolds is enabled, you can test that you can
either place item group holds or specific item holds. Toggling the checkboxes in the
staff interface will uncheck the item group hold radio button.
Signed-off-by: Lisette Scheer <lisette@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
I felt the switch to multi in the EmailFieldPrimary preference was a bit
confusing given that type exposes a 'select all' option which doesn't
make sense with the pre-existing 'first valid' option being an override
in the code.
This patch opts to switch it back to 'Choice', meaning that only one
option can be picked and adds a 'selected addresses' option which
prompts the use of a new 'EmailFieldSelection' preference which allows
for the multi-select as before.
To test:
1) Run though the test plan for 'Update notice_email_address method to
return a list' but with the following ammendments:
* 2) As aposed to being able to select multiple options under
EmailFieldPrimary, you should now only be able to select one option at
a time, but a new 'selected addresses' option should be present.
* 8) Select the 'selected addresses' option for 'EmailFieldPrimary' and
also select multiple fields for the new 'EmailFieldSelection'
preference.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Axelle Clarisse <axelle.clarisse@univ-amu.fr>
Signed-off-by: Mathieu Saby <mathsabypro@gmail.com>
Signed-off-by: Aleisha Amohia <aleisha@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Pymble Ladies' College
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If an SMS::Send driver ( such as Twilio ) requires additional parameters, those
parameters have to be placed in a yaml file named after the SMS::Send driver,
and the path to that file specified in the Koha conf file.
It would be good if we had the option to specify those parameters in a YAML
system preference instead. This would be less complicated and avoid requiring
an administrator to update that data from the backend.
Test Plan:
1) Set up an SMS::Send driver that requires additional options;
a Twilio account meets these requirements and can be created for
free. Set this up using the traditional file based system.
2) Verify you can send SMS messages
3) Move the contents of that file into the new system preference
SMSSendAdditionalOptions
4) Verify you can still send SMS messages
5) Delete the file
6) Verify yet again you can still send SMS messages!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Catalyst IT
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new 'ESPreventAutoTruncate' preference allowing to define
Elasticsearch search fields that should not be autotruncated when 'QueryAutoTruncate'
is active (e.g. barcode).
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Replace all instances in files with correct capitalization for the
sysprefs:
SerialsDefaultEMailAddress
AcquisitionsDefaultEMailAddress
Test plan:
1. Apply patch
2. Run database update
3. Go to Administration > System Preferences > Acquisitions
-> Confirm correct capitalization for AcquisitionsDefaultEmailAddress
(should be "Email", not "EMail")
4. Go to Administration > System Preferences > Serials
-> Confirm correct capitalization for SerialsDefaultEmailAddress
(should be "Email", not "EMail")
5. Use git grep to confirm no remaining instances of "EMail" in the code
(other than the new dbrev, original dbrev and original release notes)
e.g. git grep --files-with-matches "EMail"
6. Confirm the test plan for Bug 20755 still works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Apply test plan and restart everything
2. Confirm AutoRenewalNotices defaults to patron messaging preferences
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system prefernce, RESTAPIRenewalBranch, analogous to the existing OpacRenewalBranch system preference.
The preference allows choosing how the renewal branch is recorded in the statistics table.
In order ot preserve existing behaviour, the default is to use the api user's branch.
To test:
1 - Checkout some items to a patron
2 - Add an API user account with circulation permissions and a different homebranch
3 - POST a renewal to: http://localhost:8080/api/v1/checkouts/{checkout_id}/renewal
4 - Check statistics table and confirm the api users branch was used
5 - Apply patches, restart all
6 - Repeat API renewal, confirm same branch used
7 - Change the RESTAPIRenewal syspref
8 - Repeat API renewal and confirm specified branch is used
9 - Confirm the syspref works for all settings
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When there are holds waiting for patrons, sometimes the librarian misses
the "Holds waiting here" display. This patch adds a modal popup warning
when checking out an item for a patron with waiting holds.
Test plan:
1) find a user (user1)
2) find a biblio (biblio1)
3) add a hold for biblio1 to user1
(search biblio1 > Holds > find user1 > Place hold)
4) checkout biblio1 to another user if not already checked out
and checkin through circulation page (not through the user page)
> confirm hold
5) there should be a "Holds waiting here (1)" section added on user1 page
6) checkout any items that isn't the one on hold for user1
-> notice it just checks out as normal
7) apply patch and update database
8) go to administration > system preferences > switch "WaitingNotifyAtCheckout" to "Notify"
9) refresh page and redo step 6
-> notice there is now a modal to warn the librarian of a waiting hold
click Ok to proceed with the checkout, click outside the modal to not do anything
10) additionnally, the popup shouldn't appear if we checkout any of
user1's waiting hold
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Mia Kujala <mia.kujala@xamk.fi>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This fixes the mistakes the unit test helped to find:
* Add missing system preferences to sysprefs.sql
* Correct spelling for AutoUpdateSetsEmbedItemData
* Correct capitalization, so that code and pref files match
* Fix OverDrive sytem preferences, where explanation/options
columns where switched, resulting in strange database entries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This doesn't add or remove any entries, but only changes
the sequence of entries to be alphabetic again, compared
to:
SELECT variable FROM systempreferences ORDER BY variable;
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add two requirements when registering a new patron:
- A child patron must have a guarantor. This is controlled by
a new syspref ChildNeedsGuarantor.
- A guarantor cannot be a guarantee.
Test plan:
1. Add a child patron without guarantor or child patron with guarantee
as guarantor succesfully.
2. Apply this patch.
3. Add a child patron as a guarantor.
=> Error is raised.
4. Turn syspref "ChildNeedsGuarantor" ON.
5. Add a child patron without a guarantor and error "Child needs a
guarantor" is raised.
6. Add guarantor. Guarantor can either be existing patron or added with
"Contact" section.
=> Save without errors.
Also prove t/db_dependent/Koha/Patron.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
