The debian/scripts/koha-translate script was still testing for the old naming
schema files. I also made sure all files are tested, to warn the user if
any of them is absent.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. Tested both upgrading and on a new install.
Old versions of koha-common would put in a symlink to the system YUI
libraries. This causes upgrade problems, so we look out for that and zap
it if it's there.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the build script keep the shipped YUI JavaScript library
instead of explicitly deleting it and using the one the operating system
provides.
Development is done against the YUI library we ship, so this makes sense
even if Debian still shipped it.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
daemon uses by default /tmp/ for pid files, if they are unspecified.
Pass the right directory to daemon, so it knows where to put the pid file.
Signed-off-by: Attila Kinali <attila@kinali.ch>
TEST PLAN
---------
1) Roll a distribution and confirm it works.
OR
1) Hack all the /var directories to point to git directories
2) Add a dummy user for the instance name
3) sudo the script with the faked instance name.
-- the daemon should be running and the pid file should be in
the expected directory.
The first way is the proper way to test, I did the latter. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The debian/build-git-snapshot script should not return success if an
error occurred.
Note that sys_command_output won't raise an error if something fails.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Made a minor change to print the command, add a newline.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The only place python is used is in the debian/bd-to-depends script.
This patch rewrite this script using perl.
Test plan:
The execution of
debian/bd-to-depends
Should return the same output.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Checked output, built a package, all is happy. Yay for no python!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently koha-disable ONLY disables the instance in the apache conf
file. Presumably if you want to disable the instance, you also want
its processes to stop, so this patch will stop zebra, if running,
and SIP, if enabled.
Depends on Bug 13784.
To Test:
1) Have an enabled instance, with zebra and SIP running.
2) Run koha-disable INST. Note that after, both zebra and SIP
will still be running.
3) Re-enable INST.
4) Apply patch, and then copy debian/scripts/koha-disable to
package site, over /usr/sbin/koha-disable.
5) Run koha-disable INST. You should now see that both zebra
and SIP have been stopped.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Due to a line in debian/rules, git-build-snapshot tries to delete a YUI-related
path that does not exist anymore (bug 13612 I guess). Build process ends with an error.
This patch deletes the line.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An incorrect conditional makes the indexer daemon fail to load.
To test:
- Enable the indexer daemon on packages [1]
- Restart koha-common:
$ service koha-common restart
- Run
$ ps waux | grep koha-indexer
=> FAIL: there's no reference to the rebuild_zebra.pl script
(line should look like *rebuild_zebra.pl -daemon*)
Run ps -ef | grep rebuild_zebra.pl too to make sure.
- Apply the patch, repeat the steps
=> SUCCESS: the rebuild_zebra.pl script is ran
- Sign off :-D
Thanks
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects the call to 'basename' inside the script so it correctly
shows the language code when asked to list the available languages.
To test:
- On a packages install, run:
$ koha-translate --list --available
=> FAIL: It shows:
am-Ethi-opac-bootstrap.po
ar-Arab-opac-bootstrap.po
az-AZ-opac-bootstrap.po
be-BY-opac-bootstrap.po
ben-opac-bootstrap.po
...
- Apply the patch
- Copy the patched debian/scripts/koha-translate script to your packages setup.
- Run:
$ koha-translate --list --available
=> SUCCESS: It shows:
am-Ethi
ar-Arab
az-AZ
be-BY
ben
...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the fixing of the namespace in the SIP code, we don't need to
modify the PERL5LIB to have the old one.
To test:
* do a package install using this and the other patches on bug 7904
* enable SIP
* make sure koha-start-sip and koha-stop-sip work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The memcache parameters aren't used by anything (except C4::SQLHelper,
but that's a cancer on the face of the earth) anymore, so they can go.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1- Build new koha packages
2- Check that the conflist file contains the changes we have made
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to this patch, the koha packages depended on mysql-client. This
meant that it was tricky to use things such as the MariaDB libraries
instead.
This patch recommends mysql, but will accept mariadb and other things
that are marked by debian as able to replace mysql.
Signed-off-by: wajasu <matted@34813.mypacks.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Package up a branch with this patch
install that package
create a site - sudo koha-create --create-db testdisable
enable a site - sudo koha-enable testdisable
check it's enabled - sudo koha-list --enabled
* it should show up
disable a site - sudo koha-disable testdisable
Do this for both debian squeeze/wheezy and ubuntu 12.04 and 14.04, if you can. I'd like to see a sign off from a debian (sq/wh)eez(e/y) or ubuntu 12 user, because I could only test reliably on ubuntu 14.04.
* make sure apache restarts and no errors are produced
check it's disabled - sudo koha-list --enabled
* it should not show up
check the site is still there - sudo koha-list
* it should still be there
check that the config file has the Include for disabling uncommented
* the line Include /etc/koha/apache-shared-disable.conf should not have a # in front.
Re-enable the site - sudo koha-enable testdisable
* the line Include /etc/koha/apache-shared-disable.conf should have a # in front.
And the final question - does the site work? All other functions unchanged?
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. code reads better too.
Edit: I added a missing space in one line.
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
* Build a package and install it, and verify that there are no errors.
* Play around with koha-translate, listing, adding, and removing
languages.
Note: one reference to prog and ccsr remains in koha-translate. This is
to allow it to remove any pre-existing translations on an upgrade.
Note 2: prog translations are still being installed, I think this is due
to the underlying translation system doing it.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
To test...
- apply patch
- build and install a new Koha .deb from patched codebase
- create a new Koha instance
- add some authority records to instance
- do a full zebra reindex
- do an authorities search, and get some results
note: this patch does not fix existing Koha instances, just new ones
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The itype facet was missing 952$y for both MARC21 and NORMARC.
This patch adds that. And also modifies the zebra-biblios-dom.cfg file
(also the debian/ version) so facetNumRecs is set to 1000 for zebra.
It is the amount of records that are taken into account. The more record,
the more exact the facets for the result set. 1000 was chosen as it changed
the time to reindex 1000 records from 18s to 19s.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a variable to koha-conf.xml controlling the use of Zebra facets.
Usage:
- use_zebra_facets = 1 | 0
Zebra facets work only on DOM.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes koha-indexdefs-to-zebra.xsl to correctly process a new syntax
for defining facet indexes on the XML files.
It also changes the retrieval file to allow access to Zebra's internal data from
Zoom (i.e. access to zebra::facet:*).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Cook <dcook@prosentient.com.au>
Seems to work with DOM and MARC21.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new cron script automatic_renewals.pl and a new
entry in crontab.example.
To test:
1) You need a few issues, some with automatic renewal and some without.
2) Confirm that each time you run misc/cronjobs/automatic_renewals.pl
those issues are renewed that meet all of the following criteria:
- automatic renewal has been scheduled either by issuing rule or by
checkbox on the checkout page
- the number of allowed renewals isn't exceeded
- renewal isn't premature (No renewal before)
3) Confirm that all other issues are not affected.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Short:
Launch an indexing daemon (rebuild_zebra.pl -daemon) process for each
enabled instance. Enabling/disabling the use of the indexer is handled
by global configuration variables in /etc/default/koha-common.
Also provides command line tools to manage the running indexer daemons
for your instances.
Long:
Using an indexing daemon avoids launching a new interpreter each time
the cron triggers the indexing, and also allows sub-minute incremental
reindexing, a requirement from our librarians.[1]
Using the indexer daemon could remain "experimental" until it gets more
testing; so is disabled by default initially. To enable the use of the
indexer the user has to tweak the /etc/default/koha-common config file.
Specifically the USE_INDEXER_DAEMON variable, which is clearly explained
in the file.
Frecquency defaults to 5 sec, and can be changed by tweaking the
/etc/default/koha-common config file too.
This patch uses rebuild_zebra.pl in daemon mode, but it is crafted to
allow changing the indexing daemon and passing specific option switches
it might need.
Regards
To+
[1] This is the .deb version of http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=8519
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modified debian/koha-common.cron.daily adding instance output dir option to
the fines.pl entry as described in the ticket.
Requires patch from Bug 8566 which provides the __instancename__ feature for
koha-foreach.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
koha-foreach has been modified to replace __instancename__ with $name
on each iteration using sed.
The docbook file for koha-foreach has also been updated to reflect the
new functionality.
To test:
koha-foreach ls -ld /etc/koha/sites/__instancename__
should list directories instead of giving an error message.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
The suggested example with ls works as expected, as does my
more complex example with fines.pl:
koha-foreach --enabled /usr/share/koha/bin/cronjobs/fines.pl \
--out /var/log/koha/__instancename__/
The man page looks good too.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
* Go to http://library/opac-tmpl and check you get a 403 error instead
of a directory listing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The OverDrive integration needs to connect to an authentication server
over HTTPS, and many systems do not install the necessary module
(LWP::Protocol::https) by default.
Test plan (for patch):
1) Run koha_perl_deps.pl -a, verify that LWP::Protocol::https appears in
listing.
Test plan (to verify that LWP::Protocol::https is necessary, needs OverDrive access):
1) Remove LWP::Protocol::https (liblwp-protocol-https-perl under Debian).
2) Run an OverDrive search on the OPAC, it should fail.
3) Reinstall LWP::Protocol::https.
4) Rerun OverDrive search, it should now succeed.
Note: older versions of Debian do not need to install LWP::Protocol::https separately;
the Debian scripts have been updated to reflect this divide.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
