Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Until now, there was only "General" and "Privacy". This patch
breaks the "General" prefs up into multiple sections.
To test:
- Go to Administration > Patrons
- Verify the current state of things
- Apply patch
- Reload patch
- Verify headings make sense and groups make sense as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The height for each section was the height of the highest section.
Now the height is set to the length of the section.
Test plan:
Go to Administration > Column configuration
Open the sections and confirm that the height fits its content.
QA: note that I guess "autoHeight: false" was meant to achieve that,
but it does not exist in the API of the plugin.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1) update database, restart memcached/plack
2) Go to Administration -> System preferences -> OPAC tab. Enable the
new PatronSelfRegistrationConfirmEmail system preference. Enable other
required self registration sysprefs.
3) Go to the OPAC home page. (You may need to log out). Click the
'Register' link so you are redirected to the member entry form.
4) Notice the 'Confirm primary email' field after the 'primary email'
field. Put 'a@a.com' in primary email, and 'b@b.com' in the confirm
field. Scroll to the end of the form and Submit.
5) Confirm the form is not successfully submitted, and an error message
is shown to indicate the email addresses do not match.
6) Confirm you cannot cut, copy or paste in either the primary email or
confirm primary email fields. Confirm the right click menu doesn't work
in these fields.
7) Disable javascript in your browser.
8) Repeat steps 3 and 4.
9) Confirm there is an error message to indicate the email addresses do
not match.
10) Re-enable javascript. Fill in the form correctly with matching email
addresses and confirm it successfully submits.
11) Disable the PatronSelfRegistrationConfirmEmail syspref.
12) Attempt to register an account on the OPAC again. Confirm the
'confirm email address' field is gone and form works as expected.
13) Re-enable the PatronSelfRegistrationConfirmEmail syspref.
14) Log in to the OPAC and go to your personal details
15) Edit the primary email field
16) Confirm you are able to submit your changes (you should not see an
error about emails not matching).
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: holly <hc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set SearchEngine syspref to Zebra
2 - Be a user with permission to manage search engine configuration (manage_search_engine_config)
3 - Confirm you do not see 'Search engine configuration' on Admin main page
4 - Apply patch
5 - Confirm you see it with '(Elasticsearch)' appended
6 - Be a user without above permission
7 - Confirm you cannot see the 'Search engine configuration'
8 - Confirm you cannot access directly:
/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes some modifications to the columns setting
administration template so that the headings are a little clearer.
In-page navigation is added for each section.
To test, apply the patch and go to Administration -> Columns settings.
- Confirm that the collapsing panels work correctly.
- Expand a section and confirm that the "jump to" links work correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Looks good, works good.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As the pref removes the whole 'line' of information, this tries to makes
the behaviour a little clearer by adding a 'and descriptions' to the pref
text. It now reads:
[Show|Don't show] the format, audience, and material type icons and
descriptions in XSLT MARC21 results and detail pages in ...
To test:
- Check both preference descriptions in the staff client
- Verify the text reads correctly and this helps things
Signed-off-by: David Roberts <david@koha-ptfs.co.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This reverts commit 8aa9f2cc07.
I agree with the following comment and as such have reverted the patch.
Quoting Phil Ringnalda <phil@chetcolibrary.org>:
Everything currently in the chunk labelled "Self Checkout" is
preferences used to control sco-main.pl, a feature that does checkout
and renewal, and optionally with the preference AllSelfCheckReturns,
also checkin.
Everything currently in the chunk labelled "Self check-in module" is
preferences used to control sci-main.pl, a separate feature that does
only checkin, and does checkin whether or not AllowSelfCheckReturns is
set.
I'd think a better solution would be to either rename the preference,
which is actually AllowReturnsInSelfCheckout, or rename the chunks to
make it more clear that they are preferences for two different features.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch moves the AllowSelfCheckReturns system preference to the "Self check-in module" section of the Circulation system preferences.
To test:
1) Check that the AllowSelfCheckReturns system preference is currently
in the "Self Checkout" section of the Circulation system preferences.
2) Apply the patch
3) The preference should now be in the "Self check-in module" section of
the Circulation system preferences.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We now display the descriptions everywhere, so we should drop the
'code' from labels.
This changes text in a lot of playes in Koha, including:
- The relatives checkouts table when displayed for the guarantor
- The new order and order receive forms in acquisitoins (item creation)
- The description of CCODE in the authorised values table
- The column description on results in item search
- The branch tranfers page
- Course reserves: add reserve items (one and in batch)
- Patron account > statistics tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The headings/labels of sections in the sys pref editor didn't follow
Koha's capitalization rules.
To test:
- Go to Administration > System preferences
- Check all tabs for the spelling of the headings
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Try to create 2 AV with the same code for the same category.
You should see a warning
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Moves the updatedatabase entry to the new format and
adds information for the explanation column of the
systempreferences table.
Also slightly rephrases the description in the system preference
editor.
To test:
- Verify database update still works the same with addition
of explanations
- Verify the sys pref description makes sense
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of this system preference.
To test:
1) Check the current wording of this system preference.
2) Install the patch.
3) Check that the wording of this system preference has changed to "Delete patrons still in the category indicated by PatronSelfRegistrationDefaultCategory X days after account creation."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Run atomic update.
Check the Logs tab of preferences.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch deals (hopefully) correctly with encoding and escaping chars.
It also remove OPACBaseURL from the url stored in DB, and readd is on
display, to avoid possible attacks.
Test plan:
Go to the authority search
fill term with something hacky
<script>alert('booh!')</script>And Ŝ♥m€ E★tr₳
Search
Click the "Report a problem" link
Fill the form and make sure the url is displayed correctly
submit
Check problem_reports.problempage in DB => Should be correctly displayed
Go to staff interface, "OPAC problem reports"
=> Confirm the link is correctly display
Click it
=> Confirm that you are at the OPAC, and the URL is correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
QA: We have a security issue here, we should not make this link
clickable from the staff side.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
status varchar(6) with readable statuses
borrowernumber not null default 0
hide form if message successfully sent
fixing hide viewed and hide closed filters
adding recipient column
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Update database and upgrade schema files (if you haven't already).
Restart memcached
- Check your user's permissions and ensure the 'problem_reports'
permission is ticked. Confirm the OPACReportProblem syspref is enabled
- Log into the OPAC and submit a problem report
- Log into the staff client
- You should see a box at the bottom of the main page showing your
pending problem report
- Click the link and confirm it takes you to the new page for managing
problem reports
- Go to Administration
- Confirm you can see a link to 'OPAC problem reports' under the
'Additional parameters' heading
- Click 'OPAC problem reports'
- Confirm your problem report is showing in the table
- Open the OPAC in another tab and submit at least two more problem
reports (so you should have at least three in the table after
refreshing)
- Try the different buttons
- selecting multiple problem reports and using the big 'mark
viewed', 'mark closed', 'mark new' buttons. Confirm there are no
failures and that the number of selected problem reports is correct
- select all, clear all, hide viewed, hide closed, hide new, show
all
- individual 'mark viewed', 'mark closed', 'mark new' buttons for
each problem report. Confirm the status shows and the correct button
is disabled while others are enabled
- Confirm the problem page link works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adding problem_reports table and OPACReportProblem syspref
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the new syspref "ILLCheckAvailability"
Sponsored-by: Public Health England
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@tudublin.ie>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment noItemTypeImages pref controls staff and OPAC
display. With this patch, there will be a separate OpacNoItemTypes
preference that allows to control display of each separately.
To test:
- Apply patch and run database update
In Administration:
- Search for 'noItemTypes' preferences
- Verify the settings of both prefs match
- Toggle prefs, verify everything works ok
- Go to the item types configuration page
- Try different settings for both prefs:
- Both set to No: Only a message with a link to the prefs should show
- Both set to Yes or either set to Yes: image configuration options
should show
In the OPAC:
- Check the following pages with item-level_itypes = record
- advanced search
- detail page
- place hold page
- Check the following pages with item-level_itypes = item
- result list
- a list (opac-shelves)
- checkouts and overdues tabs in patron account
(Note: this didn't work right before, but will now.)
- reading history in patron account
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Librarians should be able to define what sections in member entryfields in 'Main address',
'Contact' and 'Alternate contact' in member entry form for guarantee's are pre-filled from guarantor's record
The 'Guarantor surname, 'Guarantor first name' and 'relationship' fields
in the 'Contact' section should not be filled from guarantor patron
record as those fields are intended for guarantor's without patron
records in Koha.
Test plan:
1. On an adult patron's record (which has all fields filled out in the
'Main address', 'Contact' (Except for 'Guarantor surname', 'Guarantor
first name', and 'relationship'), 'Alternate address', and 'Alternate contact') select 'Add guarantee'
2. Observe:
* Fields in 'Main address' are all automatically pre-filled
from guarantor record
* Fields in 'Contact' (except 'Guarantor surname', 'Guarantor firstname'
and 'relationship') are all automatically pre-filled from guarantor
record
* Fields in 'Alternate address' (except for Contact note) are pre-filled from guarantor record
* None of the fields in 'Alternate contact' are pre-filled from guarantor
4. Apply patch
5. Run database updates
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
6. Restart plack:
sudo koha-plack --restart <instancename>
7. Go to Administration > Global system preferences and search for the
new PrefillGuaranteeField system preference
8. Observe this syspref contains checkboxes and the following are
selected by default:
Contact - Primary email
Contact - Primary phone
Main address - Address
Main address - City
Main address - Country
Main address - State
Main address - ZIP/Postal code
Main address - street number
Please note: 'Contact - Guarantor surname', 'Contact - Guarantor first
name', Contact - relationship' are not in PrefillGuaranteeField syspref
as they are for non Koha patrons and so should not be pre-filled from a Koha
patron.
9. Repeat step 1 and observe the following fields are prefilled from guarantor:
In Main address section -
streetnumber
address
city
state
zipcode/postal code
country
In Contact section -
Primary phone
Primary email
10. In the PrefillGuaranteeField syspref click '[Select all]' checkboxes
11. Repeat step 1 and observe all fields in 'Main address', 'Contact'
(except Guarantor surname, Guarantor first name, and relationship),
Alternate address and Alterate contact are filled from guarantor record.
i.e. The values in guarantor's 'Alternate address' fields fill the
guarantee's 'Alternate address' fields
12. Change a few of the prefilled field values and 'Save' and observe your changes
have been saved in addition to the unaltered pre-filled values in other
fields
13. Amend PrefillGuarantee field syspref to have no checkboxes selected
14. Repeat step 1 and observe none of the fields in Main address,
Contact, Alternate address and Alternate contact are pre-filled
15. Run tests:
sudo koha-shell <instancename>
prove xt
prove t
Sponsored-by: Waitaki Distict Council, NZ
Signed-off-by: Sally <sally.healey@cheshiresharedservices.go.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the required line to the circulation.pref file to
dispaly the onpayment option in the MarkLostItemReturned preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch rewords the 'Display in check-out' option in the patron
attribute policy
To test:
1) Apply patch
2) Go to /cgi-bin/koha/admin/patron-attr-types.pl?op=add_attribute_type
3) Check that the 8th line down has been renamed to "Display in patron's
brief information:"
4) Check the description of this same option has been changed to "Check
to show this attribute in the brief information panel in the patron's
record (staff client)."
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In git installs, cronjobs live in misc, but for package installs, they
live under bin. Let's just still with 'misc/cronjobs' which is always
cromulent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes the wording of the FinesMode and
CalculateFinesOnReturn system preferences explanations
1) Install Patch
2) Check that the wording of the FinesMode system preference has changed
to "NOTE: If the misc/cronjobs/fines.pl cronjob is being run, accruing
and final fines will be calculated when the cron runs and accruing fines
will be finalized when an item is returned. If CalculateFinesOnReturn is
enabled, final fines will be calculated when an item is returned."
3) Check that the wording of the CalculateFinesOnReturn system
preference has changed to add "NOTE: This system preference requires
FinesMode to be set to 'Calculate and charge.'" to the existing note.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Found in testing that this appears to work well for Elasticsearch -
so removing everything that made this Zebra only.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch utilises an unused search facet to handle results shown per
page.
Sponsored-by: Region Halland
Signed-off-by: Gabriel DeCarufel <gabriel@inlibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removes some last "remains" of INTRAdidyoumean.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Branchcode = Library
- Desk id = Desk ID
- Show library name on desk list and when deleting desk instead of code
- Some small changes to the database documentation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add a desk and linked it to a library (branch). That's it. In the
future it'll have super features like being able to link waiting
reserve to a specific desk.
Test plan:
1. go to the administration page and notice there isn't any mention of
desk whatsoever
2. apply patches
3. ./installer/data/mysql/updatedatabase.pl
4. prove t/db_dependent/Koha/Desks.t
5. you now have desks links in admin-home and admin-menu
6. click the link
7. add a desk
8. add another one
9. delete one
10. you should have a fair list of all current desks defined
11. Done
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There were several versions: auto renew, auto-renew, autorenew
I've decided to use auto renew (from automatic renewal) to keep
things a bit more consistent.
The DB update was missing AFTER and IGNORE for the sys pref.
Also fixed a tiny typo (tp > to)
Also changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Considering that the the use of finesCalendar for this calculation is
already a binary choice, it makes sense to remove the use of
finesCalendar here. It is an uneccessary complication that could
introduce confusion. Allowing this new setting to directly control
the behavior makes it clear and obvious what is going on.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We had a unique behvaiour where the syspref was set to string 'NULL'
as opposed to undef, we need to clean that up
To test:
1 - Set OpacRenewalBranch to 'NULL' in staff interface
2 - Renew via opac
3 - Check statistics to ensure branch is blank
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The IDreamBooks service has not seen updates in a long time, so
we should remove the service from Koha as it's no longer operational.
To test:
- Apply patch and run the database update
- Verify that the IDreamBooks related system preferences are gone
- Verify that opac detail pages and result lists still work
as expected
- Run t/db_dependent/UsageStats.t
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We can then now start to move methods from C4::Members::AttributeTypes
as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
