When editing a Patron's messaging preferences or borrower attributes, one cannot
save changes because 'userid' is not given as a parameter.
It shouldn't, but the
Check_Userid($newdata{'userid'},$borrowernumber) -check must have it.
REPLICATE THE ISSUE:
1. Find a Borrower.
2. Go to the details-tab.
3. Under "Patron messaging preferences" click edit to edit just the messaging
preferences.
4. Just save, no need to make any modifications.
5. Observe the error "Username/password already exists"
This happens to all/most of the sub-forms in the Borrower's Details-view.
AFTER THIS PATCH:
Check_Userid() get the $userid from the new parameters, or if not present, from
the koha.borrowers-table.
TEST FOR REGRESSION:
1. Edit a borrower normally. Notice no errors.
2. Edit a sub-form (Alternate address/Patron messaging preferences). Notice no
errors.
DISCLAIMER: You are free to steal/rip/modify/hack this patch to your soul's
extent without my permission. As long as it makes to Koha I am happy.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you try to create a patron and enter an extended attribute value
which is required to be unique but exists in another record the error
you receive is not clear. It uses the attribute code instead of the
description. This patch adds description to the output.
To test you must have ExtendedPatronAttributes enabled.
- Edit or create an extended patron attribute and designate it a unique
identifier.
- Edit a patron and add a value to that attribute.
- Edit another patron and try to add the same value.
You should get an error which includes both the description of the
attribute you tried to modify and the value you submitted.
Signed-off-by: Christopher Brannon <christopher@debian.brannon.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and Qa script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
buildCGISort can be deleted.
Test plan:
git grep buildCGISort
should return no result.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more buildCGISort
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Now we can use the method plugin from the memberentry form.
Test plan:
1/ Create a patron and verify sort1 and sort2 dropdown list are
correctly generated.
2/ Select values.
3/ Save.
4/ Edit the patron and verify the selected values are displayed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes Perl warnings logged when setting up the
patron attribute form in the patron editor.
To test - Patron details entry page:
* Have ExtendedPatronAttributes enabled. Check that "Additional
attributes and identifiers" section behaves.
* Verify that editing and saving a patron record does not
result in the following sorts of entries in the Apache log:
se of uninitialized value $_ in hash element at memberentry.pl line 798
Use of uninitialized value in anonymous hash ({}) at memberentry.pl line 798
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different types of patron attributes:
- repeatable
- linked to an authorized value
- free text
Tested editing, adding, removing one of multiple, adding multiple,
etc. No regressions found.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the previous code and moves the logic from the pl
to a new routine.
Same test plan as previous patch.
/!\ new unit test filename.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 10861: Reintroduced the cardnumber length check (client side)
Previous patches has removed the pattern attribute of the input, it was
not needed. This patch reintroduces it. It will only work for new
browser version.
Moreover, it manages with the ',XX' format (see UT).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the last two follow-ups. The pattern test did not work fully for me
in Firefox 26 (very recent). But I see the message when I clear the field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some dead code concerning the handling of patrons
that are members of other, institutional patrons. This code did not
work; removing it clears the field if somebody wants to do a better
implementation of such relationships between patrons.
This patch:
[1] Removes the memberofinstitution system preference.
[2] Removes the following routines:
C4::Members::get_institutions()
C4::Members::add_member_orgs() (and removing this routine
removes a reference to a borrowers_to_borrowers table that
does not exist).
There should be no changes whatsoever to system functionality with this
patch (with the trivial exception of the absence of the
memberofinstitution system preference).
Test plan:
[1] Look at the code and use grep, git grep, etc. verify this patch
does not remove something in use.
[2] Verify that there are no regressions upon adding or editing
a patron record.
[3] Verify that the memberofinstitution system preference has been
removed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a bug where using the patron editor to add a new
restriction overwrote the first existing one.
Test Plan:
1) Edit a patron, add a restriction
2) Edit the patron again, add a second restriction
3) Note the first restriction has disappeared!
4) Apply this patch
5) Edit the patron again, add another restriction
6) Note the previous restriction is not longer removed
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
- Adding and removing multiple restrictions from
- the details tab
- the checkouts tab
- the edit patron form
All works as expected.
Patch passes all tests in t, xt, and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ edit a patron
2/ set a sms alert number
3/ save
4/ edit the patron
5/ set the sms alert number to a blank value
6/ save
7/ the sms number is now an empty string
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan used:
- Activate the SMS functionality by giving a 'fake'
SMSSendDriver of TEST
- Activate EnhancedMessagingPreferences
- Create a new patron, set Other phone to 'test'
- Notice that Other phone was copied to sms number
- Edit messaging preference section using the edit link
below on the details tab and delete SMS number
- Verify it's not possible to unset the SMS number
- Apply patch
- Repeat deleting - this time it works
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
1/ Edit a patron
2/ Add a restriction with a date (in any format other than iso)
3/ Note the date is not saved
4/ Apply patch
5/ Add restriction again, note it is saved
The problem is output_pref was being called with the wrong parameters
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: The issue in on the memberentry form only (not the restriction
form on the check out page).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a warning about a duplicated patron attribute is returned,
the value was being passed back for display in the warning
message with the same name as the variable in errors
As the message is displayed in the context of errors
the error value 1 was being displayed not the value
duplicated as intended.
Pass the value to the template with a unique name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed another tiny typo while signing off: "is already in use" instead
of "is already is use."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When modifying a patron through different pages, the userid
generation does not behave always the same way; this patch
corrects this:
- when firstname and surname are present in the form, they
are used for the generation;
- if there are not in the form, the firstname and surname
in database are used instead.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Test
This patch lacks a test plan, so I do the following
1) New user, empty userid, autocompleted
2) Edit user, change userid, saved correctly
3) Edit user, main edit window, emptied userid, autocompleted
4) Edit user, Detail > Library use, emptied userid, not autocomplete (not even a dot)
5) Applied patch
6) Repeated 1-3, same behavior
7) Repeated 4), now autocompletes with same userid as 3)
So, works as described.
No koha-qa errors.
NOTE: It's impossible now to delete userid from interface.
Off-topic: tried an userid in Arabic, works very well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch corrects several uninitialized value errors.
Test plan:
- Edit a borrower
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Edit an organisation (depends on borrower category)
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Go to a borrower page who has today issues
- Click on More/Export today's checked in barcodes
=> You get a file to dowload
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up reinstates or add check for undef returned
by C4::Context->userenv, only where previous patch touch
code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, if $ENV{DEBUG} is set (for example to 1), the debug level
will be printed on the Add/Edit Patron pages (memberentrygen.tt) in the
form of: "Debug is on (level 1)".
While many if not most folks might not set $ENV{DEBUG} on a production
system, there is no reason to have this information printing on the
member template(s).
No where else in Koha is there a template that prints $ENV{DEBUG}
information, with the exception of calendar.inc, although that doesn't
activate until at least debug level 2 or 5, so it might be worth holding
on to. It is certainly more complicated than simply printing the debug
level. I don't do development on the calendars, so I'm not going to
address that one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
For a duplicated patron, the "Saluation" information
is now empty by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
.. by blanking cardnumber in the code and showing it in the template,
instead of just not showing it in the template
Autobarcode now correctly fills in on a duplicated patron.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, error message reports an age range in English. For example '0 to
17'. With this patch, the 'to' is not in the .pl file anymore.
Ruth could you sign-off this fix?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch works around the redefinition of an array that was causing the
enforcement of age ranges to not-happen.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the bug and the solution.
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Caused by code assuming a the variable $err is a hashref
when it is only a hashref if there is an error.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* group some attributes for a more friendly display
* allow a link between a borrower category and an attribute to display
it only for the specified category
* Attr classes filled with AV 'PA_CLASS' category (you have to create AV
with a new category 'PA_CLASS' to fill class list)
this patch add 2 fields in borrower_attribute_types :
category_code
class
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- Fix sql syntax error
- Fix Encoding
- SendAlerts must return an error if no email is defined
- Get error if no email in memberentry
http://bugs.koha-community.org/show_bug.cgi?id=7001
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch changes the password field to a password type input on
member-password.pl and adds a confirmation field to both member-password.pl
and memberentry.pl requiring that the password be re-entered to
confirm.
Client-side and server-side validation for the two password fields has been added
to both pages. Multiple error messages can now be displayed together on
member-password.pl.
If the user wishes for Koha to suggest a random password on member-password.pl
they can click a link which will remove the password-type input fields, replace
them with text-type fields, and automatically fill them with the random
password suggestion.
Follow-up fix lets the members.js correctly handling errors when there are
no mandatory fields
LR followup: fixing slight error that corrects previously reported template error.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested password setting/changing utilities - all work as expected and described.
Passes prove t xt t/db_dependent tests congruent with current master failures (adds no new fails).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with example from bug and by deleting parts of it:
cardnumber|surname|firstname|title|othernames|initials|streetnumber|streettype|address|address2|city|state|zipcode|country|email|phone|mobile|fax|emailpro|phonepro|B_streetnumber|B_streettype|B_address|B_address2|B_city|B_state|B_zipcode|B_country|B_email|B_phone|dateofbirth|branchcode|categorycode|dateenrolled|dateexpiry|gonenoaddress|lost|debarred|contactname|contactfirstname|contacttitle|borrowernotes|relationship|sex|password|userid|opacnote|contactnote|sort1|sort2|altcontactfirstname|altcontactsurname|altcontactaddress1|altcontactaddress2|altcontactaddress3|altcontactstate|altcontactzipcode|altcontactcountry|altcontactphone
Note: This only affects the edit screen, not the patron detail tab.
A nice enhancement would be to make this page follow the system preference too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
QA comments on Bugzilla. Passing QA.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* DBrev defined
* small improvement suggested by Marcel added = there is now a link to the schema page on the systempreference
Some code coming from BibLibre has been lost in the process of inclusion in
3.4. The result is that fine in days does not work at all (you can setup rules,
but it does nothing)
Step to reproduce:
- Koha > Admin > circ rules > set 1 day fine every day of overdue for default
rule
- Issue a book return date last week
- check-in the book => no debarment is set
The following patch will fix all of those problems by :
* updating borrowers.debarred to a date field (instead of tinyint). It contains
the limit of the debarment
* changing API of DebarMember and UpdateBorrowerDebarred to pass a date
* display debarrdate where applicable. Note that a debarrdate of 31/12/9999 is
considered as unlimited and not displayed
* added a debarrcomment, usefull to explain why a patron is debarred (this is
independant from debarrdate changes and can be used when placing an unlimited
debarment too)
[2011-05-12] F. Demians. It works as described. And I can confirm this
functionality is impatiently awaited by French libraries since one year. Thanks
BibLibre for the good work and for contributing this code.
Bug 6328 Followup--update DB structure
Thanks Katrin.
Bug 6328: make comment a textbox / fix debar by notice trigger
Debarring by notice triggers was broken, because the new function
expects a date as second parameter.
The comment field in patron account details was a very long text field.
Patch changes it to be a textbox instead.
Bug 6328: Lift debarment leaves patron account
'Lift debarment' redirects to an empty circulation page.
BZ6328 follow-up 3
Fixes comment 23 from Fernando L. Canizo : when the patron was debarred and debar removed
he still could not check-out.
The changes in the IsMemberBlocked (that were on biblibre/master) were lost somewhere
The sub was still checking for old_issues instead of calling CheckBorrowerDebarred
to get a debardate if applicable
Note : this bug was appearing only is you had issuing rules defined for itemtype/categorycode/branch.
Seemed to work if you had only default rules. That's probably why it hadn't been spotted before
BZ6328 follow-up 4
Comments fron Zeno Tajoli: The patch is OK and I sign-off it. Two little changes done on
installer/data/mysql/kohastructure.sql and installer/data/mysql/updatedatabase.pl
Signed-off-by: koha <koha@kohabase.localdomain>
When adding a patron who is a child, the default library is not set when defining a guarantor, this patch corrects the problem.
More, for children with no guarantors, the default branch is the editing branch.
BibLibre MT5795
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Now a blank cardnumber will get stored as a null in the database, which
is a value that allows duplicates. As such, if cardnumbers aren't
mandatory, then you can actually save a user with it being blank.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If a guarantor search is not being performed, the creation of any Child category_type patron will
not default to the currently logged in branch, but rather the first branch alphabetically.
Adding a test for the existence of any guarantor branch data before assigning it clears up this problem
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch enables the ACCTDETAIL notices (and any branch-specific derivatives) to use
<<branches.*>> and <<borrowers.*>> tokens
This patch also attempts to send the email from the branch email first, falling back to
KohaAdminEmailAddress if no branch email exists.
To test:
1. Enable AutoEmailOpacUser system preference
2. Add <<branches.*>> tokens to the ACCTDETAIL notice
3. Create a new patron, including:
a. test email address in the field matching your AutoEmailPrimaryAddress syspref value
b. username and password (required to send a notice)
c. any other required fields to save the record
4. Check you inbox. Notice should send instantly (no need to run process_message_queue.pl)
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
