Currently, the additem.js is using "indexOf" to search
for a value in an array. While this works in Chrome, Firefox,
and IE > 9, it fails miserably in IE 8 and 7 (which don't have
the indexOf method). This means that users aren't able to add
items using the acquisitions module!
Instead of using "indexOf", we should be using the jQuery function
$.inArray. It was added in jQuery v1.2 (3.8.0 uses v1.3.2 so even
our oldest supported release can use this method). It's perfectly
cross-browser compatible...works in Chrome, Firefox, and every
version of IE that I've tried (i.e. 7, 8, 9).
Test Plan:
Before applying patch:
0) Switch to Internet Explorer 7, or 8, or 9, or 10.
If you're using IE 9 or 10, you'll need to change the Document Mode to
IE7 standards or IE8 standards.
You can do this by opening Internet Explorer 9 or 10, pressing F12 (or
clicking on the gear in the top right corner and choosing
F12 Developer Tools), and then clicking on "Document Mode" on the
top toolbar. There, you can change to IE7 or IE8 standards.
N.B. This is not always a perfect emulation in every case, but this
time it does show you the bug.
1) Set the system preference AcqCreateItem to "receiving an order"
2) Go to Acquisitions
3) Either:
a) Receive a shipment for a basket with items
b) Create a new basket, create an order, close the basket, and
then do 3a)
4) In the "Item" fieldset, fill out some fields such as barcode,
Date acquiried, Public note, etc.
5) Click "Add" at the bottom of the fieldset
6) Note that while the item may have been added, the "Item" fieldset
is not being shown again. You may also notice a Javascript error
appearing in a pop-up window or you might see a yellow warning flag
on the bottom status bar.
APPLY THE PATCH
7) Do a full refresh of the page (hold down shift and press the refresh
button on the browser next to the address bar), and try adding items
again.
8) Note that you receive no warnings and that items are added correctly
as they would be in Firefox or Chrome.
OPTIONALLY
9) To be sure that I haven't broken anything, go through the same steps
in IE9 (with IE9 standards) or Chrome or Firefox. Everything should be
working.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested in IE10 in IE7 mode and IE9 mode. Also tested in Firefox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new system preference AllowTooManyOverride to control whether
a librarian can override the 'Too many checked out' message which is
currently always overridable.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Attempt to check out 1 more item to a patron than the max issues
4) You should be allowed to override by default ( current behavior )
5) Set AllowTooManyOverride to "Don't allow"
6) Repeat step 3
7) You should be blocked from being able to issue the item
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new system preference is activated by default, which mean there
will be no change in behaviour on update.
The system preference is correctly added to the database and .pref
files.
Test plan and QA script passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This fixes the broken 'Edit' (subscription) link on the
check expiration page in serials.
To test:
- Add a subscription
- Go to the check expiration page
- Search for your subscription, use an expiration date in the
far future
- Verify the edit link on the result list doesn't work right
before applying the patch, but works after
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "return date" column sort is not using the date sort algorithm because it is
confused by the combination of date data and text data ("Checked out").
This patch adds the use of datatable "title-string" sort type.
With that, the date in ISO format are used for sorting and because
letters are before numbers, "Checked out" rows are more recent than any date.
Test plan :
- set dateformat syspref to "dd/mm/yyyy"
- Go to members/readingrec.pl for a borrower having a old issues and
checked out issues
=> Check that sort of "Return date" is correct.
For example :
With patch :
20/01/2011
06/03/2011
20/03/2011
Checked Out
Without patch :
06/03/2011
20/01/2011
20/03/2011
Checked Out
- Test also with dateformat syspref "mm/dd/yyyy"
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixing this line:
<legend>[% IF course_id %] Edit [% ELSE %] Create [% END %] course</legend>
As grammar works different in different languages, having single
strings like that in a predefined order makes having a nice translation
unnecessarily hard.
This will make it a little easier:
<legend>[% IF course_id %]Edit course[% ELSE %]Create course[% END %]</legend>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The course reserves entry form should not be shown if there are no
DEPARTMENT authorized values, since this prevents the form from being
submitted. This patch replaces the form with an error message when no
DEPARTMENT authorized values are found.
Also corrected:
- Corrected grid structure for more standard display
- Converted labels with no corresponding inputs to <span class="label">
- Closed unclosed tags
- Corrected incorrect capitalization
This patch contains whitespace changes, so please ignore whitespace when
examining changes.
To test, delete any DEPARTMENT authorized values, if present. Create a
new course in Course Reserves. You should see a warning that no
DEPARTMENT values were found.
If you are logged in with the correct permission, the warning should
contain a link to the correct authorized value page. If you do no, the
warning should refer the problem to an administrator.
After creating one or more DEPARTMENT values, the form should display
and submit correctly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
After this patch has been applied, I get an error message and no form
if I don't have any DEPARTMENTs defined, which makes sense given that
the form can't be submitted without a DEPARTMENT.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
You now see a useful error message, when no departments have been
defined. Else you are taken to the correct form.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This commit makes it possible to translated the 'staged'
and 'error' record statuses as well as the 'auto_match'
overlay status.
Also takes out a bit of HTML cruft in one string that is
not needed for translation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. New strings are parsed into the po files:
"%s Always add items %s Add items only if matching bib was found %s Add items only if no matching bib was found %s Ignore items %s %s %s %s "
"%s No match %s Match applied %s Match found %s %s %s "
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Following bug 9215: non translatable strings are now
present in the template and translatable
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Not only does this make the strings translatable it makes the template
a lot easier to read
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Cataloguing plugins for UNIMARC 128b and 128c fields are only in Ffrench.
This patch translates them.
Source : http://blue.lins.fju.edu.tw/mao/marc/unicon.htm
Note : 128b and 128c are deprecated in last version of UNIMARC Manual (field 145 used instread).
But they are still used in French Sudoc network.
To test : in a UNIMARC english Koha, edit a record and use 128b and 128c
cataloguing plugins. Check everything is in english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for translating those!
Verified new strings get parsed into the po files.
Templates still contain lots of tabs, those can be fixed separately.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the staff user does not have the group_manage acquisition permission,
do not offer to create a new basket group when closing an order basket.
This avoids a situation where if a staff member without that permission tries
to close a basket and chose the option to create a bakset group, they would
be redirected to the login page.
To test:
[1] Log in as a staff user that does not have
the acquisition/group_manage permission.
[2] Create a new order basket, attach at least one
order line to it, then close it.
[3] Verify that the confirmation page does not
offer to create a basket group with the
same name as the order basket.
[4] Log in as a staff user that has the
acquisition/group_manage permission.
[5] Create and close an order basket.
[6] Verify that this time, the confirmation page
*does* offer to create a basket group.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Improve the code that displays and allows staff to
set the basket group from the basket details page
for a closed basket.
Prior to this patch, a staff member who did not
have the group_manage acquisition permission would
still see a control to change the group that the
basket belongs to; attempting to change the group
would present with with a login page.
This patch also does some tidying of how basket group
details are passed to the template.
To test:
[1] Create an order basket and close it. Do
not assign it to a basket group.
[2] View the basket details while logged in as
a staff user who has the order_manage acquisitions
permission but not the group_manage. The
displayed basket group should be "No group".
[3] Switch to a staff user who also has the
group_manage permission, then view the basket
details again. The basket group field should
now be a select input that allows you to change
the basket group.
[4] Change the basket group. Verify that the basket group
you selected is now displayed as the current group
for that order basket. The basket group delivery and
billing place fields should also now be displayed.
[5] Close the basket group set in the previous step, then
view the basket details again. This time, the basket
group name should be displayed with a suffix of " (closed)",
and no input to change the group should be displayed.
[6] Swith to a staff user who does not have the group_manage
permission, view the basket details, and verify that
the basket name is displayed with a suffix of " (closed)".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch converts the "Add" and "Clear" links
to the standard "submit/cancel" format inside a fieldset. This gives
them a little more visual weight.
Based on the changes made by Liz Rea and Jonathan Druart.
To test:
- create a basket
- add a record to it
- scroll down - the link to add item and cancel should both be more
prominent now.
- Click "Add item" - it should add an item.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I still feel weird about the button, but as two people have said they'd rather have the button, I'm alright with it I guess.
Really what I want is people to notice it's there and click it at the appropriate time. I hope this will help that issue.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Leaves the translation problems, but that needs more work and is
out of the scope of this bug.
Tested Add and Update functionality works correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a warning about a duplicated patron attribute is returned,
the value was being passed back for display in the warning
message with the same name as the variable in errors
As the message is displayed in the context of errors
the error value 1 was being displayed not the value
duplicated as intended.
Pass the value to the template with a unique name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed another tiny typo while signing off: "is already in use" instead
of "is already is use."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Subfields hidden in your ACQ framework leave a gap where they used to
be in the item entry form when adding an item to an order. This patch
makes the same change made by 7116 to services/itemrecorddisplay.tt to
correct the problem.
To test:
- Edit your ACQ framework and set some item subfields to hidden in the
editor.
- Set your AcqCreateItem system preference to "when placing an order."
- Add a title to an existing basket from an existing record.
The item entry form should display correctly with your hidden subfields
hidden. No whitespace should be left behind where the subfields were
hidden.
Also changed: Invalid "size" attributes on hidden form fields in
neworderempty.tt, stray </li>.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, passes all tests and QA script.
Thx Owen!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
doc-head-close.inc contains a reference to "wizard.css" which doesn't
exist. The option to include it never evaluates as true, and that
section can be removed from the template.
To test, apply the patch and view any page in the staff client.
Everything should be styled as before. A search of the Koha source
should return no references to "wizard.css" or a "wizard" variable.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
No occurrence of "wizard" in pl/pm files.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the date published to the subscriptions tab in the staff
interface bib display and renames the former "Date" column to
"Date arrived".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When jQueryUI was updated in the CCSR theme the corresponding CSS
changes were not copied over at the same time, causing style problems
with jQueryUI widgets. This patch makes the necessary changes.
To test, apply the patch, clear your browser cache, and view any page
which uses jQueryUI tabs (advanced search, bibliographic detail page).
Tabs should look correct and correctly show which tab is active.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS changes only.
Confirmed problem in CCSR OPAC templates.
Tested advanced search and detail pages in CCSR and prog.
In order to fully test advanced search I added location and
collection to AdvancedSearchTypes.
Also tested the branch tooltip as I spotted some CSS added for that.
Works beautifully, no problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Client-side table sorting should exclude articles like "a," "an," and
"the" when sorting by title. This patch adds a custom sorting plugin for
use by DataTables and a configuration line to the DataTables string
configuration file which can be translated for any language.
As an example, this patch modifies the patron checkout history template
to use the new sort on the title column.
To test, apply the patch and clear your browser cache to ensure the
revised JavaScript file is loaded. Sort the table by title. Titles
should be sorted regardless of the presences of "a," "an", or "the" at
the beginning of the title.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and is a good improvement.
I have added German articles to the list for testing purposes
and it worked nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changing the framework in the MARC editor immediately after duplicating
a bib record no longer clears the fields.
This patch changes the Changefwk Javascript function so that it passes
the "op" value and the "biblionumberdata" (as the biblionumber) from
addbiblio.pl back to itself, when submitting the form in order to
change the framework.
The reason we need to do this is because the form in addbiblio.tt
is hard-coded to always submit an "op" value of "addbiblio". Currently,
we need to have it hard-coded to "addbiblio", because all the magic
happens in addbiblio.pl when there is an "op" of "addbiblio". If we
always passed the "actual" "op" value, such as "duplicate", nothing
would ever happen when we clicked "save". It seems to me that this
is a flaw in the design of addbiblio.pl.
If we pass the "op" and "biblionumber" when changing frameworks, we're
able to tell addbiblio.pl that we're still wanting to "duplicate" this
"X" biblionumber. However, by having the form still hard-coded to
"addbiblio", when we hit save, the form will do the magic, check if
it's a duplicate, and save the record (or prompt for action if it
is a duplicate).
--
I also noticed that if you make changes to a record, then change
the framework before saving, your changes get cleared (since the
original record from the database is loaded when the page reloads).
It seems to me that this is a bug. Changing the framework should
change the layout while preserving the content. I think most users
would assume that when changing the framework.
This patch also introduces another hidden input into addbiblio.tt and
the Changefwk Javascript called "changed_framework". Basically, if
the Changefwk Javascript is run, it tells addbiblio.pl that the
framework is changed, and it uses the posted data from the form
(which we have been modifying) instead of reloading the record from
the database.
--
Test Plan:
A) Before Applying Patch:
To Show That Changing the Framework Erases All Fields When
Duplicating a Record:
1) Go to any bib record
2) Go to Edit > Edit as new (duplicate). You should see filled
in fields.
3) Change the framework to any other framework than the one
that is currently specified.
4) Note that every single field is now blank
To Show That Changing the Record then Changing the Framework
Ignores Changes, When Editing a Record
5) Go to any bib record
6) Go to Edit.
7) Change the title of the record to "I've changed the title".
8) Change the framework to any other framework than the one that is currently specified.
9) Look at the title. You'll notice it is the original title, and NOT "I've changed the title".
B) Apply the Patch
Also, clear your memcache and shift+refresh your screen. You don't want to use cached templates/javascript.
C) After Applying the Patch
Repeat Steps 1-3 and 5-8.
You should now notice that changing the framework when duplicating the item does not clear all the fields.
You should also notice that any changes you make prior to changing the framework will still exist after changing it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When using the 'Organize by' option to change the display of the
suggestions, the option is applied, but the pull down always jumps
back to the first entry 'Status'.
This patch fixes that.
To test:
- Try out all settings and verify that after the page reloads the selected
option is applied to your suggestions and the pull down shows
the option you selected.
Note: Until bug 10519 is properly fixed the tabs will not show
the correct descriptions, but the URL will show you the selected
option as parameter: displayby=acceptedby
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
acq.js includes an immediately invoked function expression, which means
that it runs whether or not it is called. Because this function tries to
reference the YAHOO object, it triggers an error on pages which don't
include the main YAHOO assets. Only the basketgroups page uses this
function and YAHOO assets.
It's probably possible to make this a regular function, but I propose
simply wrapping it in a check for the YAHOO object so that it only
executes on pages where YAHOO exists--the basketgroups page.
To test, apply the patch, clear your browser cache, and test on both the
basketgroups page and at least one page which also includes acq.js
(addorderiso2709.pl, neworderempty.pl, aqbudgets.pl, suggestion.pl,
etc.) and confirm that the browser reports no JavaScript errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We have to load star ratings js and css file if Babeltheque is enabled
and OpacStarRatings is disabled.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When I removed images from the OPAC in favor of sprites I didn't take
into account the display of star ratings from Babeltheque. This patch
copies the star ratings display from Koha's own ratings display,
though it is not dependent on JavaScript.
I'm sure testing would be easy for someone with access to the
Babeltheque service, but I do not. I temporarily modified the template
to set some variables for testing purposes:
[% SET SEARCH_RESULT.score_int = 3 %]
[% SET SEARCH_RESULT.score_avg = 3 %
[% SET SEARCH_RESULT.num_scores = 87 %]
This enabled the display of the ratings, allowing me to confirm that
stars display correctly. Ratings should work with and without
OpacStarRatings enabled.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I also fudged the template to test, so QA would need to be done with
someone with Babeltheque access
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some vendors ship materials from the same invoice in multiple packages.
In those cases, it would be good to notify the librarian when they enter
a duplicate invoice number, so that they can continue receiving on the
previously-created invoice, rather than creating an invoice with a
duplicate number.
To test:
1) Apply patch and run database update.
2) Make sure that you have created at least one invoice on
acqui/parcels.pl and take note of the invoice number.
3) Try to create an invoice with the same invoice number.
4) Note that without changing your configuration this works exactly
the same as before.
5) Turn on the AcqWarnOnDuplicateInvoice system preference.
6) Try to create a new invoice with the same number as the one you
noted earlier.
7) Make sure you get a warning about a duplicate invoice.
8) Choose to receive on the existing invoice.
9) Confirm that you are receiving on said existing invoice.
10) Start the receiving process over, and this time choose "Create new
invoice anyway."
11) Confirm that you are now receiving on a new invoice.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I have followed the test plan, but also checked some more things:
- Checking the duplicate check works when you have the entered
invoice number in your database multiple times already.
- Checking that no duplicate message is shown if you enter the
invoice number and it's already been used for an invoice from
another vendor.
Looks all good. I think the only thing we could argue about here
is if this could be activated by default for new installations.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to delete unused invoices (for example,
invoices created by mistake), and there really should be, since errors
and absent-mindedness can result in numerous empty invoices over the
course of years.
To test:
1) Apply patch.
2) Create three invoices in the Acquisitions module. For one of them,
receive at least one item. For the other two, do not receive any
items.
3) View one of the invoices that does not have any items on it.
4) Try to delete it. This should succeed.
5) View the invoice that has an item. There should not be any option
to delete it.
6) Do an invoice search that brings up the other invoice with no items
on it. Try to delete it from the results page. This should succeed.
7) Run the unit test:
> prove t/Acquisition/Invoice.t
8) Sign off.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. I also did another test:
I cancelled all receipts from an existing invoice and then could
successfully delete it in the last step.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes some things on the order receiving/parcel page.
1/ Removes dead code
2/ Displays an error message if invoiceid is unset or does not refer to an
invoice
3/ Fixes a bug in the note ("change note" and "add note" links)
Test plan:
1/ Try to call the invoice page with an existing invoiceid and check
that order results are consistent.
2/ Try without invoiceid or a bad invoiceid and check that an error
message is displayed.
3/ Add and change notes.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely for all tests done.
- parcel.pl with invalid invoicenumber gives a nice error message
- parcel.pl with a valid invoicenumber looks normal
- changing and editing order notes works well
Passes QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the pre-population of the fields for the batch
item editor with the default values from the default framework
optional and off by default.
Test Plan:
1) Apply patch
2) Add default values for cost and replacement cost to the
default framework.
3) Browse to Tools / Batch item modification
4) Choose a file, or entire some barcodes in the text area
5) Ensure that the 'Populate fields with default values from default
framework' is *not* checked
6) Click 'Continue'
7) Observe that the fields for cost and replacement cost are blank
8) Click the 'back' button on your browser
9) Check the checkbox to enable the default value
10) Click 'Continue'
11) Observe that the fields for cost and replacement cost now contain
the default values you assigned them in the default MARC framework
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switch works correctly, all tests and QA script pass.
Note: there is a bug with default values for all non text input
fields. Default values won't be applied for those fields as the
pull downs are not preselected correctly with the default values
defined in the framework.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you're using the batch modification tool and entering a call number
like "E+ 123 ABC", the tool removes the + and puts a space in its place,
e.g., "E 123 ABC"
This is because the form is posted via Ajax by background-job-progressbar.js.
Values are URI-encoded using escape(), but this method does not escape some
characters: * @ - _ + . /
Also, "+" is considered as a space in a URI.
This patch replaces escape() by encodeURIComponent() which encodes every character.
Test plan :
Perform an items batch modification by setting '* @ - _ + . /' in a field
(notes for example) and see that all characters are saved correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The Koha interface standardizes on the term "item" instead of "copy," so
the "Add multiple copies" button would be more correctly labeled "Add
multiple items."
To test, view the add item screen for an existing or new record. You
should see a button labeled "Add multiple items."
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The DB field aqorders.biblioitemnumber seems to be unused except to get
the itype on the spent.pl page.
This information can be retrieved uising another SQL join.
Test plan:
Try a complete workflow in the acquisition module: create an order,
receive it, play with the syspref AcqCreateItem.
Check that no regression is found and that the data for existing
orders don't change.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "renew selected" link on the list of a user's checkouts looks bad
because the next icon in the sprite shows through. This patch modifies
the sprite to give it proper spacing and corrects the CSS to accommodate
the change.
To test, apply the patch, clear your browser cache, and view the
following pages to confirm that the change works:
- With TagsEnabled and TagsInputOnList enabled, view a search results
page when logged in and when not logged in. Tag links should be
styled correctly.
- With OpacBrowseResults enabled, open the detail page for any record
and click the "browse shelf" link. The "forward" and "back" arrows
should be styled correctly.
- With OpacRenewalAllowed enabled, log in to the OPAC and view your
checked out items. The "renew selected" and "renew all" links should
look correct.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: this will fix only the prog theme, but not the ccsr theme.
And it works perfectly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Star ratings do not appear correctly in the CCSR theme because it lacks
the image sprite used to display them. This patch adds the required
file.
To test, apply the patch and view a search results set which includes
titles which have an existing rating. Ratings should appear correctly.
View a detail page for an title which has a rating, and add a rating to
a title which has no rating. Ratings should look correct and work
correctly.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass - including leaving a rating on the newly visible stars
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, make sure you have set OpacStarRatings set
to 'results and details'.
The star images show up in OPAC results with the correct amount
of stars after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
If an author's name includes parentheses or other escape-characters, the tracing links
produced in the OPAC fail in XSLT mode. This patch wraps the author names
in double-quotes, providing the necessary escapement.
Test plan:
- Create a new framework, delete Thesaurus from 100 and other fields
- Create a new record in this framework (or change an existing record to this framework)
- Add 100$a - use parentheses
- Check the search links in OPAC detail pages
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
XSLT change adding quotes. Search now matches search in the intranet.
Passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes it easier to avoid having the top bar
overlap other OPAC page content (particularly custom
header content set via the opacheader system preference).
This is done by moving the top-nav div outside of the
main doc3 div and adjusting the CSS accordingly. Yes,
this does end up having top-nav.inc be included from
opac-bottom.inc, but it would require touching rather
more templates to have it be included immediately after
the <body> tag.
This patch also removes a duplicate instance of the
cmspan span.
To test:
[1] Change to the CCSR OPAC theme.
[2] Before applying the patch, open a set of OPAC
pages (e.g., main page, user page, search results, bib
details) in your web browser.
[3] Apply the patch, and open the same OPAC pages in separate
tabs. Comparing the pre- and post- version of each page
to verify that the placement
[4] Add an OpAC header using the opacheader system preference.
[5] Verify that the header is displayed without overlapping
the top bar.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In CCSR the opacheader preference isn't really in the header it's to the
right of the search box (see attached). I'm okay with a customizable
region over there, but we should have a new preference for that and
header should be above the search box as it implies.
To test:
1) Put something in the OpacHeader syspref. Preferably something large
and header-like for maximum effect.
2) Select CCSR theme.
3) View OPAC. Notice placement of "header" content.
4) Apply patch.
5) View OPAC. Notice placement of "header" content.
6) Sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised with one caveat; the content of
opacheader is by default underneath the div "top-bar". A couple breaks
in my OpacHeader test made it visible, so I'm going to assume this is a
styling issue and not a bug as such.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch revises the staff client list contents view to better match
staff client search results, showing more information and offering more
ways to interact with the contents than before.
- List contents output has been modified so that the staff client can
use XSLT-formatted data just as the OPAC can. As in the OPAC it
depends on XSLTResultsDisplay being enabled.
- A "toolbar" has been added which is similar to that in search results,
offering the option to add items to a Cart, add them to a different
list, place multiple holds, remove items from the list, or merge
records.
- This toolbar has been made to float on scroll like the one on the
MARC edit page.
- Library and shelving location have been added to the display of call
numbers. Call numbers are linked to a search as they are in search
results.
- Edit links are included just as they are in search results.
- Automatic focus on the add by barcode form has been removed so that
the page doesn't jump to the bottom unnecessarily.
- basket.js's "addMultiple" function has been modified so that it
receives an array of checkboxes rather than looking for checkboxes in
a specific form. This helps abstract its functionality for use on both
search results and lists. results.tt is modified accordingly.
- The page layout has been widened to make room for the increased amount
of information on the page.
- A new "merge" icon has been added to the default Bootstrap sprite.
To test:
- View both public and private lists in the staff client.
- View lists with and without contents.
- Test the functionality of options in the toolbar: Add to cart, add to
lists, place multiple holds, remove items, merge items.
- Test with users with and without cataloging privileges to confirm that
catalog-related controls are correctly shown or hidden.
- Test with XSLTResultsDisplay set both to "default" and empty.
- Since the staff client and OPAC use some of the same code, test that
lists in the OPAC have not broken.
- Since JavaScript was modified which affects both lists and search
results, confirm that adding items to the Cart and Lists from search
results hasn't been broken by this patch.
Revision corrects conditional display of hold link, hiding it in cases
where there are no items or the record's itemtype is not for loan.
Also corrected is the behavior of the Cart/List "save" button in order
to prevent it from submitting the "remove items" action which is the
default for the form.
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Edit: Patch rebased against current master and hard-coded paths to
/prog/ corrected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The jQueryUI Accordion widget, included by default in Koha, is
well-suited to handle the kind of show/hide actions which are used in
the MARC subfield editor. This patch replaces the custom-writted JS with
jQueryUI JS and markup.
To test, load the tag subfield editor: Admin -> MARC frameworks -> MARC
structure -> Subfields -> Edit. Confirm that basic, advanced, and other
contraints panels are show/hidden correctly. Confirm that tabs work, and
that edit operations are not disrupted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Looks nice, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Prior to this patch, if a patron has fines which exceed the limit set by
OPACFineNoRenewals but OPAC renewals are disallowed by OpacRenewalAllowed,
a message was displayed in their OPAC summary like this:
"Please note: You currently owe XXX in fines. Please pay your fines if you wish
to renew your books."
Information about outstanding fines in this case has no bearing on
how the user sees his summary of checkouts; since the user cannot
renew the loans from the OPAC regardless of their fine balance if
OpacRenewalAllowed is not enabled, this patch removes the message.
To test, try various combinations of OpacRenewalAllowed and
OPACFineNoRenewals with a patron who has outstanding fines:
- OpacRenewalAllowed ON and OPACFineNoRenewals ON (set to be triggered
by the test patron's fines): Logging in to the OPAC the patron should
see a warning on opac-user.pl about not being able to renew items
because of fines.
- OpacRenewalAllowed ON and OPACFineNoRenewals OFF (threshold high
enough not to trigger a block): No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals ON: No warning appears.
- OpacRenewalAllowed OFF and OPACFineNoRenewals OFF: No warning appears.
If OpacRenewalAllowed is diabled and a patron's fines exceed the limit
set by OPACFineNoRenewals they should see no message.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-ql.pl and perlcritic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows for the addition of new suggestion status by adding
authorised values of the category SUGGEST_STATUS
I sign it off. Details of my test plan :
1. Applying the patch
2. Checking existing suggestions, in staff view and opac : ok
3. Creating a new suggestion in staff and in opac : ok
4. Moving a suggestion into one of the old categories : ok
5. Adding a new authorized value category named SUGGEST_STATUS and fill it with 3 values :
value Description Description (OPAC) =)>
tata tatapro tataopac
titi titipro titiopac
toto totopro totoopac
For "tata", I defined a branch restriction on branche B.
6. Connecting in staff interface as a librarian of branch A : I could only use codes titipro and totopro. On OPAC, these codes were displayed as totoopac and titiopac
7. Connecting as librarian of branch B : I could use the 3 codes
8. Checking tabs visible : new tabs for tata, titi, toto, but also a new "Unknown" tab with 0 record.
Maybe point 8 could be fixed in a followup.
I sign off the patch.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
When editing a biblio, the bug 7883 introduces the "save and continue
editing" feature. After saving, the page is loaded with the first
tab selected. This patch refresh the page with the same tab selected.
Test plan:
1/ Edit a biblio.
2/ Click on the 5th tab.
3/ Click on the "Save and continue editing" button.
4/ You are redirected on the same page with the same tab selected
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The OPAC offers RIS and BIBTEX as choices for bibliographic downloads,
but the staff client was missing these options. This patch adds them.
To test, view a record in the staff client (detail.pl, MARCdetail.pl,
etc.) and click the "Save..." toolbar button. BIBTEX and RIS should be
available and functional.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove the unrequired extra processing and pass
the array of itemnumbers as itemnumbers_array
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In particular, removed it from the call number and publication year
input fields.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2 javascript functions should be apply only in a specific case, not for all
views.
Test plan:
- Switch on the IndependentBranches pref and log
in as a superlibrarian.
- Try to change the library for a notice. Before the patch,
no change is applied.
- Try to create a new notice, changing the library from
default in the process. Before the patch, the notice
is not created.
The bug can also be reproduced when IndependentBranches is
off, in which case the staff user need not be a superlibrarian.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron search box for placing a hold request on a bib in the
staff interface now supports autocomplete if the CircAutocompl
system preference is enabled.
This patch grabs the autocomplete handling javascript stuff from patron-search-box.inc
and puts an adjusted version on reserve/request.tt. It sets form and input
IDs to match those configured in the autocomplete call, adjusted where needed to
avoid name collisions with the patron-search-box.inc that is present everywhere.
This patch also doubles the width of the patron search input field.
To test:
- On a biblio record, go to the Holds tab, mine looks like
/cgi-bin/koha/reserve/request.pl?biblionumber=2
- A search box is shown for patron searching.
- Search for a patron: it works as usual.
- Make sure CircAutocompl is "Don't try"
- Apply the patch
- Click the Holds tab again, and do the same search: functionality should remain intact.
- Change CircAutocompl to "Try"
- Click the Holds tab again
- Autocomplete should show you the possible options, and once you choose one result,
it should work as usual.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Adding a nice new autocomplete feature.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the MARC21 008 editing form to create dropdowns
for each of the 008/18-21 (Illustrations) and 008/24-27 (Nature of contents)
positions.
To test:
1) Edit or add a new bibliographic record
2) Click on field 008 value builder, positions 18-21 and 24-27 only
show an input text box
3) Apply the patch
4) Reload value_builder page, now each position (18-21,24-27) has
its own dropdown. Note that it may be necessary to clear
the browser cache for the change to be visible.
Similar changes could be made for the 006 value builder.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are no pages in the staff client which use YUI JS assets other
than basketgroups.tt. The links to YUI assets can therefore be removed
from the global include and put directly into the basket groups
template.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Really nice to see YUI go.
Checked that the drag&drop functionality in basket groups still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
