The default/active tab when opening the sys pref editor used
to be 'Acquisitions' as the first tab, but should now be the new
first 'Accounting'
To test:
- Go to Administration > System preferences
- Verify the Aquisition tab is second and preselected
- Apply patch
- Repeat
- Verify now Accounting is selected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Try to create 2 AV with the same code for the same category.
You should see a warning
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Lari Taskula <lari.taskula@hypernova.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
status varchar(6) with readable statuses
borrowernumber not null default 0
hide form if message successfully sent
fixing hide viewed and hide closed filters
adding recipient column
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
- Update database and upgrade schema files (if you haven't already).
Restart memcached
- Check your user's permissions and ensure the 'problem_reports'
permission is ticked. Confirm the OPACReportProblem syspref is enabled
- Log into the OPAC and submit a problem report
- Log into the staff client
- You should see a box at the bottom of the main page showing your
pending problem report
- Click the link and confirm it takes you to the new page for managing
problem reports
- Go to Administration
- Confirm you can see a link to 'OPAC problem reports' under the
'Additional parameters' heading
- Click 'OPAC problem reports'
- Confirm your problem report is showing in the table
- Open the OPAC in another tab and submit at least two more problem
reports (so you should have at least three in the table after
refreshing)
- Try the different buttons
- selecting multiple problem reports and using the big 'mark
viewed', 'mark closed', 'mark new' buttons. Confirm there are no
failures and that the number of selected problem reports is correct
- select all, clear all, hide viewed, hide closed, hide new, show
all
- individual 'mark viewed', 'mark closed', 'mark new' buttons for
each problem report. Confirm the status shows and the correct button
is disabled while others are enabled
- Confirm the problem page link works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We need to be consistent and provide the mappings.yaml file generated by
the script.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The amdin page for the "did you mean" feature has two block for setting it up in the staff interface, and a note saying this isn't implemented on the staff interface yet.
We remove the part about the staff interface until it actually is implemented.
Test plan :
1) Apply patch
2) Go to Administration > Did you mean?
3) See there is only the OPAC block
4) Change some checkboxes
5) Save configuration
6) Check that configuration is saved
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Owen Leonard 2018-03-16 10:47:47 UTC :
<<
I don't think the system preference adds any security. There are already multiple permissions required for working with plugins:
- Configure plugins
- Manage plugins ( install / uninstall )
- Use report plugins
- Use tool plugins
And even with those permissions your server must be configured to allow the use of plugins.
>>
Test plan :
1) Install kitchen sink plugin https://github.com/bywatersolutions/koha-plugin-kitchen-sink
2) Run misc/devel/install_plugins.pl
3) Set config enable_plugins=1
4) Check all parts of the plugin are working
5) Set config enable_plugins=0
6) Check all parts of the plugin are disabled
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
- Ensure that the sequence of columns will be the same for new
and updated installations (add AFTER ...)
- Fix permissions (see bug 22868)
- Fix column configuration (see 16784)
- Remove '- ' displying before the date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The .pl was checking for a new permission desks_management not
(yet) added. As the templates already checked for manage_libraries
the .pl was changed accordingly to also use it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add a desk and linked it to a library (branch). That's it. In the
future it'll have super features like being able to link waiting
reserve to a specific desk.
Test plan:
1. go to the administration page and notice there isn't any mention of
desk whatsoever
2. apply patches
3. ./installer/data/mysql/updatedatabase.pl
4. prove t/db_dependent/Koha/Desks.t
5. you now have desks links in admin-home and admin-menu
6. click the link
7. add a desk
8. add another one
9. delete one
10. you should have a fair list of all current desks defined
11. Done
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Replace C4::Members::AttributeTypes->num_patron with
Koha::Patrons->filter_by_attribute_type
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We can then now start to move methods from C4::Members::AttributeTypes
as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds course_items_table to the column config tool
TEST PLAN:
1. Have some course reserves
2. Add some items to that course reserve and browse to opac-course-details
2. See all the unconfigurable columns
3. Apply patch
4. Browse to column config > OPAC > opac-course-details
5. Try hiding each column and make sure the correct column is hidden on opac-course-details.pl
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is some quite old and unused code in Koha related
to printer configuration and network printing. These code
hasn't been functional in a long time and should be removed.
This patch:
- Removes printcirculationslips system preference
- Removes table printers
- Removes branchprinter column from branches
Check that:
- Go to administration
- Open any age there, but change the last bit to: printers.pl
- Apply patch, run the database update
- Verify the hidden page no longer exists
- Verify that logging in and out still works correctly
- Verify that checkout and returns work correctly
- Switch to another branch using the "Set library" option
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
NO_LIBRARY_SET was used when the DB user was logged in. Since bug 20489
it's not longer possible. We could remove the code.
One occurrence left in C4::InstallAuth as there is no (real) logged in user yet.
Test plan:
* Install Koha to make sure NO_LIBRARY_SET is not needed during the
install process
* Login into Koha
* Make sure the your library's name is displayed correctly in the header
* Set another library
* Confirm that the library's name is updated
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problem during install, nor changing library.
Fixed (pre-existing) tab in circ/branchtransfers.pl
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds opac-course-reserves to the column config tool
TEST PLAN:
1. Have some course reserves and go look at opac-course-reserves.pl
2. See all the unconfigurable columns
3. Apply patch
4. Browse to column config > OPAC > course_reserves_table
5. Try hiding each column and make sure the correct column is hidden on opac-course-reserves.pl
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It is the same as for debit types.
It adds a new column `archived` in table `account_credit_types` that has
the same purpose than `account_debit_types.archived`
Test plan:
0. Apply patch && run updatedatabase && update_dbix_class_files
1. Go to Admin » Credit types
2. Add a new credit type, give it a code and a description and check
'Can be manually added'
3. Go to a patron's accounting section, 'Create manual credit' tab
4. Verify that the new credit type appears
5. Return to Admin » Credit types and archive the credit type
6. Verify that the new credit type is not available anymore in 'Create
manual credit'
7. Restore the credit type and verify that it is available again
8. Create a manual credit with the new credit type
9. Go to Reports » Cash register and make sure you can find the
transaction by filtering on transaction type
10. Edit the new credit type and set some library limitations, make sure
that the credit type doesn't appear if you're connected to a library
you didn't selected, and that it appears if you're connected to a
library you selected.
Note to QA team:
The change in Koha/Account.pm, I added it because otherwise Koha died
when adding a manual credit with a custom type.
In that case, offset type will default to 'Manual Credit'. I'm not sure
if that is the best thing to do. I'm open to suggestions :)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is an interface for quick and efficient browsing through records.
It presents a page at /cgi-bin/koha/opac-browse.pl that allows you to
enter the prefix of an author, title, or subject and it'll give you a
list of the options that match that. You can then scroll through these
and select the one you're after. Selecting it provides a list of records
that match that particular search.
To Test:
1 - Apply patches
2 - Update database (updatedatabase on kohadevbox)
3 - Compile the CSS
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
yarn build --view=opac on kohadevbox
4 - Enable the new syspref OpacBrowseSearch
5 - Have ES running and some records in it
SearchEngine syspref set to Elasticsearch
6 - Browse to opac home, click 'Browse search' link
for your site)
7 - Test searching for author, title, and subject
8 - Verify that results are returned in expected order
9 - Experiment with fuzziness
https://www.elastic.co/guide/en/elasticsearch/reference/5.6/common-options.html#fuzziness
Options are: exact (0 edits), fuzzy (1 edit), very fuzzy (2 edits)
10 - Click any result and verify specific titles are correct
11 - Click through title to record and verify it is the correct record
12 - Test that disabling pref removes the link on the opac home
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds the "Attributes" field to z3950 servers.
The feature here is not quite de same.
In the old patches, the attributes were applied to individual query parts if the part already contains "@attr" and the additionnal attribute is not already in the query part.
Here, the content of the new field is prepended to all PQF queries sent to the server.
This new way of doing is simpler and works for the sponsor.
Test plan:
I) Apply the patch
II) Run updatedatabase.pl
1) Add a new z3950 server with the following parameters:
Hostname : catalogue.banq.qc.ca
Port : 210
Database : IRIS
Syntax : Marc21
2) Perform a z3950 search on that server.
Keyword (Any) : egypt
2.1) Nothing Found.
3) Add attributes on the server administration page
@attr 4=1
4) Perform the same z3950 search
4.1) A lot of results
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This removes code duplication by introducing a new subroutine
strip_non_numeric() that removes whitespace and makes the rule value
'' if it is a string value instead of a digit. The call to
strip_non_numeric() is now added also to all the rules it is needed
in.
To test:
1. Write some string like "test" to rules:
- Current checkouts allowed
- Current on-site checkouts allowed
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
- Holds per record (count) – can be found in default policy
2. Save rules
3. Apply patch
4. Edit the rule line where you just typed all those strings and save
5. Notice how the values are now empty strings (some say "unlimited" but
if you go check from DB it should show empty value there)
Sponsored-by: The National Library of Finland
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This fix permits to add an "Important" option to the marc structure pages.
Testing:
1) Apply the patch
2) Run updatedatabase.pl
3) Regenerate CSS
4) Define 100 as an "important" field ( Administration » MARC bibliographic framework » MARC structure ( Default Frameword) » Edit )
5) Define 100$a as an "important" subfield (Administration » MARC bibliographic framework » MARC structure (Default Frameword) » Subfield » Onglet a)
6) Edit a record to clear the field 100 (subfields are all blank)
7) Save the record.
8) Validate the following message:
A few important fields are not filled:
* tag 100 subfield a Nom de personne in tab
* Field 100 is important, at least one of its subfields should be filled.
Are you sure you want to save?
Sponsored by the CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the holds awaiting pickup
tables. Doing so helps solve the printing issue by adding a "Print"
option to both tables. Using this print function will provide a
printable version of only that table.
To test you should have multiple holds in your system which are marked
"waiting" and some which have been waiting longer than the value
specified in the ReservesMaxPickUpDelay system preference.
Apply the patch and go to Circulation -> Holds awaiting pickup.
- On both the "Holds waiting" and "Holds waiting over..." tabs the
DataTable should display correctly and all the controls should work,
including the columns settings and the choices in the export menu.
- Confirm that the "Print" action creates a printable version of only
the table you are viewing.
- Go to Administration -> Columns settings -> Circulation.
- Change some visibility controls for the tables under the
"holds_awaiting_pickup" heading (id=holdso and id=holdst). Confirm
that these changes are reflected in the "Holds waiting" interface.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The column was missing from the yml file.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this it is not possible to make for a specific patron category
or itemtype a more specific unlimited holds_per_day rule if you have a
catch all rule (categorycode = *, itemtype = *) with limited
holds_per_day value.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The "Clone these rules" feature in admin/smart-rules.pl was
dropped. This re-implements the cloning using Koha objects.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The previous patch modifies:
- categorycode => undef,
- itemtype => undef,
- branchcode => $branch,
+ branchcode => undef,
But in that condition $branchcode is not '*' and so we should not set it
to undef
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When you create hierarchical groups of libraries you are not allowed to add
several times the same library to a given group/subgroup. The libraries
that are part of the group is not displayed on the interface, to prevent
the user to select it.
However this restriction is only done template-side, the controller and
module does not handle it.
To prevent that this patchset enforces the constraint at DB level, and
display a message to the end user.
Test plan:
- Go to Home › Administration › Library groups
- Add a group
- Add a library
- reload the page several times
=> Without this patch the same library appears several times in the group
=> With this patch applied you will see a friendly error message
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch corrects the order of the columns in the columns
configuration YML file. The incorrect order was causing the wrong column
to be hidden when changing the columns settings for the table in
Administration.
To test, apply the patch and go to Administration -> Columns settings.
- Under Patrons -> pay-fines-table, test hiding the account_type and
description columns, together and separately.
- Verify that the correct columns are hidden on the pay fines screen
(Patron -> Accounting -> Make a payment)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The permission name for changed during the implimentation of bug 23321
but one case was missed. This patch corrects that mistake.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
0) Make sure you have a late order
a) Create a test vendor unless you have one
b) Create a test basket unless you have one
c) Close the basket to mark the order as late
1) Go to the late orders table
Before patch : Orderno, ISBN, vendor notes, internal notes are absent
After patch: fields are present
2) Edit the vendor note and/or the internal note
3) Press the save notes button
4) Refresh page and cache (CTRL+F5), if notes have been correctly saved, your modifications should be displayed.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds DataTables column configuration and export options to
the suggestions management tables in the staff interface.
The columns settings made via the administrative interface will affect
tables under each tab in the interface whether it be organized by
status, library, etc. However because of the way the KohaTable function
is currently written, changes made via the "Columns" button will only
affect the visible table.
To test, apply the patch and go to Acquisitions -> Suggestions.
- Under each tab, the table of suggestions should have a DataTables
toolbar with export and columns buttons. These controls should work
correctly:
- Showing and hiding columns should work as expected
- Exports should work, excluding the first and last columns
- Test the tables when using the various "Organize by" settings.
- Test changing the settings in Administration -> Columns settings.
- Verify that the changes you make to that configuration are
reflected in the suggestions tables.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently, the rules used to create OAI sets are processed with the 'or'
boolean operator between each rule.
This patch allows to use 'or' or 'and' between the rules.
The evaluation of the rules is done according to the boolean operators
precedence: AND has a higher precedence than OR.
For example:
A and B or C and D
will be evaluated as follow:
(A and B) or (C and D)
Test plan:
- Apply the patch
- Apply the atomicupdate
- Prove t/db_dependant/OAI/AndSets.t
- Check that existing mappings still work
- Try modifying existing mappings
- Try creating new mappings
- Check that the boolean operators precedence is correctly taken into account
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a the ability to define where a debit type will be
available as a option for use.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When executing
Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings()
against populated search engine mappings tables, one gets this
exception:
DBD::mysql::st execute failed: Duplicate entry '388-73' for key
'PRIMARY' [for Statement \"INSERT INTO `search_marc_to_field` ( `facet`,
`search_field_id`, `search_marc_map_id`, `sort`, `suggestible`) VALUES (
?, ?, ?, ?, ? )\" with ParamValues: 0='', 1='73', 2='388', 3=undef,
4=''] at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line
1834.\nDBIx::Class::Storage::DBI::_dbh_execute(): Duplicate entry
'388-73' for key 'PRIMARY' at /home/koha/Koha/Koha/SearchField.pm line
38"
This patch fixes this, by first deleting all entries, then adding the
default ones.
If a subroutine says reset_elasticsearch_mappings(), I expect it to
reset the elasticsearch mappings without errors. When writing tests it
is better to call that one subroutine reset_elasticsearch_mappings
instead of the bunch of code in
admin/searchengine/elasticsearch/mappings.pl?op=reset_confirmed
Also this promotes code reuse.
TEST PLAN:
a. perl -e 'use Koha::SearchEngine::Elasticsearch; Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings'
b. Run misc/devel/populate_db.pl on an already populated DB and you eventually
face this problem.
After this patch, step a. works.
This patch is adapted from the original patch made by Olli-Antti
Kivilahti <olli-antti.kivilahti@jns.fi>.
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a new checkbox option 'Is local hold group' when you create a new root group.
To test:
1) In intranet go to Library Groups in admin module
2) Add new root group
3) Check that there is no 'Is local hold group' checkbox
4) Apply this patch
5) Add new root group
SUCCESS => a new 'Is local hold group' checkbox appears
6) Select 'Is local hold group' and save
7) Click edit button for root group
SUCCESS => 'Is local hold group' is checked
8) Sign off
Sponsored-by: VOKAL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The same sysprefs search will not always return the results in the same
order.
If you search for 'd' in the "search system preferences" box
/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=d
you will see that the modules are not ordered consistently.
This patch makes them display alphabetically
Test plan:
Search the same string several times in the syspref list.
The search result should always be ordered the same way
Signed-off-by: cori <corilynn.arnold@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It gives incomplete results and not sure it ever worked.
To prevent data loss it is better to remove this option.
Note that the code in C4/ImportExportFramework.pm is too complex to
attach with this patch to deletion of the code related to the XML
import/export. Safer to keep it for a separate bug report.
Test plan:
Import/export biblio frameworks and confirm that there is no more
reference to the xml format.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Just in case.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a status check into the mana configuration page and
prompts the user to ask an adminstrator to check the configured mana
service url.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1. Verify that biblioitems.itemtype, items.itype are
mapped to a MARC field. Otherwise create those mappings.
2. Create a biblio with an itemtype
3. Create an item with a different itemtype for this biblio
4. Check out this item to a patron (P1)
5. Verify that both itemtypes are displayed in the
checkouts table (moremember.pl, circulation.pl, returns.pl)
6. Create a patron whose guarantor is P1 and verify that both itemtypes
and the ccode are displayed in the 'relatives checkouts' table
Followed test plan, patch worked as described, also passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As of bug 20589 we no longer analyze sort fields and so we no longer need to append ".phrase"
to our sort in searches.
Additionally, sort fields based on 'sum' should also use sum in building the value to sort on
To test:
0 - Be using ES
1 - Find the most circulated item in your collection
2 - Search for '*'
3 - Sort by popularity DESC
4 - Note that item is not first
5 - Try to sort by anything but relevancy, it fails
6 - Apply patch
7 - Redo searches and sorts
8 - Things should now work as expected
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch rmeoves the 'delete' option from the debit_types system and
replaces it with an 'archive/restore' workflow. This will help
maintained referential integrity.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Naviage to a patron record and select the accounts > manual invoice
tab
2) Add some manual invoices and confirm they are working as expected
3) Signoff
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Go to admin home, note there is new Debit types page in Accounting
section
2) Go to any other admin page and confirm there is link to Debit types
in the admin menu as well
3) Go to Debit types page
4) You should see a datatable listing existing debit types, ensure they
are working as expected.
5) Try to create, edit and delete some debit types. Note: Some debit
types cannot be deleted as they are needed for koha functionality.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch restores the methodology prior to bug 23602 of passing the
full Koha::ItemType objects to the template and thus giving us the
ability to use all the methods present within them.
Test plan:
1) Ensure you have at least one itemtype with an assigned icon and the
images enabled.
2) View the itemtypes admin page and note the icons display again
3) Ensure you have at least one itemtype with library limitations
defined.
4) View the itemtypes admin page and note the library limitations still
display.
5) Signoff
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds column configuration to the table of item types
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Item types.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the item types table. Confirm that these
changes are reflected in item tyeps administration.
Test with noItemTypeImages on and off.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Generate a list of fields for the query_string query fields parameter,
with possible boosts, instead of using "_all"-field. Also add "search"
flag in search_marc_to_field table so that certain mappings can be
excluded from searches. Add option to include/exclude fields in
query_string "fields" parameter depending on searching in OPAC or staff
client. Refactor code to remove all other dependencies on "_all"-field.
How to test:
1) Reindex authorities and biblios.
2) Search biblios and try to verify that this works as expected.
3) Search authorities and try to verify that this works as expected.
4) Go to "Search engine configuration"
5) Change some "Boost", "Staff client", and "OPAC" settings and save.
6) Verify that those settings where saved accordingly.
7) Click the "Biblios" or "Authorities" tab and change one or more
"Searchable" settings
8) Verfiy that those settings where saved accordingly.
9) Try to verify that these settings has taken effect by peforming
some biblios and/or authorities searches.
Sponsorded-by: Gothenburg Univesity Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a column in itemtype table to display branch limitations.
To test:
1) Open item types admin page.
CHECK => there is no column for branch limitations, even if you add a limitation in an item type.
2) Apply this patch
SUCCESS => A new column appears that displays branch limitations per item type
3) Sign off
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This bug introduced a regression whereby if an authorized value has no
branch limitations then the authorized value cannot be edited once it
has been created. The edit page would display an error and not load.
This is the second case of a simple ternary correcting the issue, but
the logic of returning 'undef' from 'get_branch_limits' being called
into question.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds the ability to set a cash register as the default selected
option when making payments at a particular branch.
1) Note the addition of a 'Make branch default' button in each row of
the table under 'Manage cash registers'
2) Click the button and note that the button has changed.
3) Click on an alternative cash register for the same branch and note
that the default has been switched to the new register.
4) Click the 'unset' button on the default branch and note that there is
no longer a default register for this branch.
5) Signoff
Sponsored-by: PTFS Europe
Sponsored-by: Cheshire Libraries Shared Services
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add in administrative interfaces to allow the management of cash
registers.
Test plan:
1) Enable the use of cash registers by setting 'UseCashRegisters' to
'Do'
2) Check that the 'Accounts > Manage cash registers' option now appears
in the 'Administration' area.
3) Click through to 'Manage cash registers' and note the message
suggesting you add your first register
4) Add you're first cash register
5) Note that the message has now been replaced by a table of cash
registers including the one you have added in the previous step.
6) Edit the cash register created in step 4 and note that the table
reflects the changes
7) Signoff
Sponsored-by: PTFS Europe
Sponsored-by: Cheshire Libraries Shared Services
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds some new columns to the overdue report: Patron category,
item home library, item holding library, item type. Adding these columns
makes available columns better match the available filter fields in the
sidebar form.
Column configuration is added to this DataTable, with the new columns
defined as hidden by default in order to preserve current functionality.
This patch also fixes a bug where the home and holding branch template
variable names didn't match what was being used in the template for
pre-selecting the searched-for value in the sidebar filter menu.
To test, apply the patch and go to Circulation -> Overdues.
- The list of overdues should look correct, with no new columns shown.
- Test the column visibility button, showing the columns which are
hidden by default. Confirm that the data in these columns displays
correctly.
- Update the default configuration for this table in Administration
-> Configure columns. Confirm that your changes are applied to the
overdues report.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This bug introduced a regression whereby if any authorized value has no
branch limitations then the authorized value administration page would
fail to display at all.
A simple ternary corrects the issue, but I'm now wondering about the
logic of returning 'undef' from 'get_branch_limits'.. perhaps an empty
(or full) resultset might be a better option to prevent us from
requireing ternaries before calling chained methods on such objects.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adapts the controller script for handling authorised values,
and the tests to reflect the method names changes.
To test:
- Verify you can add/delete/edit authorised values with/without branch
limitations, as usual
=> SUCCESS: All works as usual!
- Run:
$ kshell
k$ prove t/db_dependent/AuthorisedValues.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When creating an entirely new itemtype the script would fail upon
attempting to lookup existing itemtype branch limits. This patch adds a
ternary to prevent the failure.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a select multiple when you add/edit an itemtype, creates functions to return itemtypes by library, and filters the options of itemtype select in additem
To test:
1) Apply this patch set
2) perl installer/data/mysql/updatedatabase.pl
3) In koha administration => item types, edit "Books" itemtype
CHECK => there is now a select multiple whith libraries at the bottom
4) select centerville and save
5) set centerville as current libary
6) search for any biblio in the catalog
7) click on "edit items"
CHECK => book item type is present
8) set any other libary as current library
SUCCESS => book item type is not present
9) Sign off
Sponsored-by: Northeast Kansas Library System
Sponsored-by: Southeast Kansas Library System
Sponsored-by: Central Kansas Library System
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If a budget is locked, there is a "New fund for $budget" link that is
disabled but clickable.
We should ensure that the link is not clickable and prevent it at
controller level (do we need it at module level, ie.
Koha::Acquisition::Fund->store?)
Test plan:
- Create a budget, lock it
- Go to /cgi-bin/koha/admin/aqbudgetperiods.pl
- Click on the name of the budget you just created
=> The "New > New fund for $budget_name" button should be disabled
- Click it anyway
=> Without this patch the form to add a new fund is displayed
=> With this patch applied nothing happens
- Hit /cgi-bin/koha/admin/aqbudgets.pl?op=add_form&budget_period_id=XXX
With XXX the budget's id
=> Without this patch the form is displayed
=> With this patch applied you get a message:
"The budget is locked, fund creation is not possible."
And you are not able to create a new fund
QA notes:
1. See description
2. The add_validate op can still be forced, let trust librarians with
administration permissions for now.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Increases maximum field count from the default 1000 to 10000 to accommodate large records and MARC as an array.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds preference ElasticsearchMARCFormat that controls whether MARC records are stored as ISO2709/MARCXML or array. Array is searchable by field and also indexes all subfields in the _all field for searching.
Test plan:
1. Test that searching and indexing works with the patch without any changes.
2. Switch to array format and index some records.
3. Check e.g. the 008 field of a record and verify that the record can be found with the contents enclosed in quotes.
4. Check that it's possible to search for a specific field/subfield. Search query: marc_data_array.fields.655.subfields.a:Diaries
5. Check that tests still pass, especially t/Koha/SearchEngine/Elasticsearch.t
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If strict SQL modes are set, the insertion of a new Z3950 server can
fail.
DBIx::Class::Storage::DBI::_dbh_execute(): Incorrect integer value: ''
for column 'checked' at row 1 at
/home/vagrant/kohaclone/admin/z3950servers.pl line 82
Using Koha::Z3950Servers fixes the issue (handled from
Koha::Object->store)
Test plan:
- Turn the strict SQL modes on (config strict_sql_modes)
- Create a new Z3950 server filling only the mandatory fields.
=> Without this patch you will get the failure, with this patch applied
the server will be inserted sucessfully
- Delete it
=> No regression should be found
- Search for servers
=> No regression should be found (the search is a start-with, LIKE "$pattern%")
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It will fix the insert of new subfields with SQL strict modes
DBD::mysql::st execute failed: Incorrect integer value: '' for column
'hidden' at row 1 [for Statement "
Test plan:
- Turn the config strict_sql_modes ON
- Add a new subfield to a field
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration to the DataTable which displays
Z39.50 search results in the cataloging module.
The Z39.50 results screen has its own server-side paging system, so I
added some code to copy the page number information ("Page 2 / 6") to
the DataTable toolbar for a more consistent appearance. The wording of
that information has also been modified for consistency's sake.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox)
- Go to Cataloging -> New from Z39.50/SRU.
- Perform a Z39.50 search which will return multiple pages of results.
- Confirm that the DataTable controls work correctly: Search, columns
show/hide, export.
- Confirm that the page number information is correct as you navigate
through pages of results.
- Go to Administration -> Columns settings.
- Confirm that the columns configuration settings for the z3950_search
table in the "Cataloging" section works correctly. Changes made here
should be reflected in the table of Z39.50 search results.
- Test other tables which use columns configuration to confirm that the
changes made in this patch doesn't disrupt their behavior. Test that
any custom columns configuration are applied. For example:
- Administration -> Libraries
- Reports -> Saved reports
- Circulation -> Holds queue
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Also fixes the mappings.yaml to use correct field name (left over issue from bug 19575), so reset mappings and reindex before testing.
Test plan:
1. Reset mappings and reindex biblios.
2. Check that tests in t/db_dependent/Koha/SearchEngine/Elasticsearch/QueryBuilder.t pass.
3. Try that all of the following year range type work in publication date search and year limit in advanced search:
yyyy
yyyy-yyyy
-yyyy
yyyy-
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removed references to setting and getting the items.paidfor
field. Where it was used for display, in moredetail.pl, we replace it
with a query on the accountlines.
Test plan:
1) Apply patch
2) Pay off a LOST item
3) Check for the associated display of 'Paidfor?:' on the itemdetails
page
4) Writeoff a LOST item
5) Check that a 'Paidfor?:' is not displayed on the itemdetails page.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch will move the list item refund rules from a dedicated table to the circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Verify lost item refund rules remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Set all values in Default checkout, hold and return policy section on
circulation rules admin page, try for all libraries and for one specific
library. Save.
2) Click on unset and confitm
--> without patch, the Maximum total holds allowed value remains
--> with patch the unset removex Maximum holds value too
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We had a mix of q||, q{} and '' in this one script. This followup just
makes them all conform to our standard style of q{}.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This gets rid of the warning "Use of uninitialized value $auto_share
in string ne at [...]" by initializing the variable with empty string.
Test plan:
1) Go to page cgi-bin/koha/admin/share_content.pl and unselect "Auto
subscription sharing". Click "Save".
2) Check plack-error.log and notice the warning "Use of uninitialized
value $auto_share [...]"
3) Apply the patch and repeat the previous steps but now this time the
warning is gone in plack-error.log.
4) Make sure the AutoShareWithMana syspref with and without the patch
is in unselected state after clicking "Save".
Sponsored-by: The National Library of Finland
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds columns configuration and export features to the
checkout history page.
This patch also removes some inline CSS: "overflow:hidden" from both the
checkout and holds history pages. This was breaking the table controls
tooltips, and didn't appear to me to be necessary.
To test, apply the patch and restart Plack (or restart_all on
kohadevbox).
- Open a patron's checkout history page in the staff client.
- The table of checkouts should have controls at the top.
for columns configuration and export/print.
- These controls should work correctly.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I've applied a patch on Mana test server. If you want to
test with your own Mana instance, do the folowing:
- checkout bug/22210 branch from
http://git.biblibre.com/biblibre/koha-mana.git
- run these sql queries on Mana database (we need an update DB method
i think):
- ALTER TABLE librarian ADD COLUMN name VARCHAR(50) AFTER email
- UPDATE librarian SET name = (SELECT CONCAT(firstname, ' ',
lastname))
- ALTER TABLE librarian DROP COLUMN firstname
- ALTER TABLE librarian DROP COLUMN lastname
Test plan
- set mana_config to "https://mana-test.koha-community.org",
- go to admin > Share content with Mana KB,
- set "Use Mana KB for sharing content" to yes,
- save,
- in the 2nd fieldset, enter a name and email,
- click on send to Mana KB,
- check that you got a token,
- you should receive an email (Mana KB registration)
- check the name is correct
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Move to admin
Add a permission
Remove descriptions from table
Clean up template
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixes handling of /0 selector in addition to several fixed field positions. Note that ff7-01-02 is in fact 00-01 in Zebra and that has been replicated here.
Test plan:
1. Before applying a patch, check from Elasticsearch (e.g. localhost:9200/koha_biblios/_search?q=_id:123) what is indexed in Elasticsearch for a record for date-entered-on-file, ff7-00, ff7-01, ff7-02 and lleader.
2. Apply the patch, update database and save the record again.
3. Verify that the contents of the forementioned fields is now correct in Elasticsearch.
4. Verify that tests pass: prove -v t/Koha/SearchEngine/Elasticsearch.t
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Unfortunately, the tables here can't use a foreign key as one table uses null where the other uses
'*' This patchset alters the delete method so delete related rules. It is somewhat of a workaround until
all the columns in issuingrules are moved to circulation_rules
To test:
1 - Add some issuing rules in koha, making sure to set maxissueqty
2 - Check the DB: SELECT * FROM circulation_rules;
3 - note some circulation rules were created
4 - Delete your rules via the staff interface
5 - Check the DB, the circulation rules remain
6 - Apply patch
7 - Repeat
8 - Huzzah! The rules delete!
9 - Prove the tests, read the code
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds sorting and column configuration to the stock
rotation tables, both rotas and items. No new defaults for the table are
defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Tools -> Stock rotation.
- In the table of rotas test that sorting works correctly.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Choose a rota with multiple items on it and select manage ->
items. Repeat the above DataTables functionality tests.
- Go to Administration -> Columns settings and edit the default
configuration of the stock rotation tables. Confirm that these
changes are reflected in the corresponding tables.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff interface handle the new flag when editing
the categories. I didn't add the flag to the list of categories table
because it makes it too big, but can be easily added if required by
users or QA.
To test:
- Along with other patches from this bug, edit patron categories
=> SUCCESS: Notice the changes are correctly stored
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the templates relying on the OpacResetPassword syspref
use the introduced TT plugin method instead by changing:
[% IF Koha.Preference('OpacResetPassword') %]
=>
[% IF Categories.can_any_reset_password %]
To test:
- Verify that all the places in which the 'forgot password' link is
displayed in OPAC keep working, provided there's at least one category
that has the flag set
- Attempt to recover the password for a patron that belong to a valid
category (i.e. that has the flag set)
=> SUCCESS: You can go through the normal process
- Attempt to recover the password for a patron that belongs to a
category with the flag unset.
=> SUCCESS: Once Koha identifies your category, you are told you are not
allowed to do it
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff interface handle the new flag when editing
the categories. I didn't add the flag to the list of categories table
because it makes it too big, but can be easily added if required by
users or QA.
To test:
- Along with other patches from this bug, edit patron categories
=> SUCCESS: Notice the changes are correctly stored
- Sign off :-D
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds CodeMirror syntax highlighting by default to JS and CSS
system preferences. HTML preferences will use CodeMirror editors if
UseWYSIWYGinSystemPreferences is disabled.
Three new CodeMirror files are added to support three new syntax
highlighting modes: XML (for HTML), CSS, and JS.
A new option is added to *.pref file configurations for textareas which
are intended for HTML, JS, or CSS: syntax. This option is passed to the
CodeMirror configuration to control syntax highlighting mode.
Textareas without a syntax option specified will not have CodeMirror
enabled.
To test, apply the patch and go to Administration -> System preferences.
Test the behavior of several preferences which use <textarea> as their
input. For example:
- OPACUserJS (JS)
- IntranetUserCSS (CSS)
- OpacHeader (HTML)
- BibtexExportAdditionalFields (no highlighting)
Text entry in each of these should have the correct syntax highlighting
applied to them. All data should be saved correctly.
Test with UseWYSIWYGinSystemPreferences both on and off.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the item types administration script so that it
passes a valid message type to the template, where the type is used as a
CSS class. "Error" is a nonexistent dialog class. It should be "alert."
To test, apply the patch and go to Administration -> Item types.
- Try to delete an item type which is in use. The style of the error
dialog should be correct.
- Try to add an item type using a code which already exists. The error
should look correct.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Go to Admin->Circulation and fines rules
2 - Set All/All rules ot have a limit for Current checkouts allowed (and onsite checkouts allowed)
3 - Select an itemtype to add a new rule
4 - Save without entering any values
5 - Note that new rule displays with the same numebr as the all/all rule
6 - Check the DB, not no lines were added to circulation_rules table
7 - Delete the rule from the staff client
8 - Apply patch
9 - Repeat, note the new rule is unlimited
10 - Run selenium tests
11 - They pass!
12 - Check no rules/itemtypes are added to your system by the tests
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Create a list of patrons
2. Add some patrons to this list
3. Go to this patron list
(/cgi-bin/koha/patron_lists/list.pl?patron_list_id=XXX)
4. Verify that you can show/hide all columns except the one containing
the checkbox
5. Verify that you can export the table data using the Export menu
6. Go to admin/columns_settings.pl, and verify that the configuration
works for table 'patron-list-table'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch add language as a facet to ES results - it adds
a new template plugin for languages to get the appropriate
description given an iso 639-2 code
To test:
1 - Make sure you have records with differing languages (in the MARC21 008
field characters 35-37 or UNIMARC 101a)
2 - Apply patch
3 - Reload Elasticsearch settings:
http://localhost:8081/cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4 - Reindex your records
5 - Search for a phrase that will return results in several languages
6 - Verify you see factes correctly labelled for 'Language'
7 - Verify the facets work
8 - Verify both opac and staff results
9 - prove t/db_dependent/Languages.t
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new section 'Facet order' in the Biblio tab of the
'Search engine configuration' admin page of the Elastic mappings.
The idea is to let the librarians define the facet to display and order
them as their needs.
The ergonomic is not perfect and I am open to any suggestions.
Test plan:
Move up and down the field list to order the facets
Hide/show some facets
Rebuild index
At the OPAC and the staff interface you should see the changes on the
search result page.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Whilst working through this patch for signoff I found a case where the
calling signature of GetBudgetPeriod was incorrect. I removed the
superflous passed parameter in this followup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Reset mappings
2. Run perl misc/search_tools/rebuild_elastic_search.pl -d -b -v
3. Do a search and verify that the Places facet works
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a column for collection code to the lost items report.
To test, apply the patch and run the lost items report. You should see a
collection code column.
Test column configuration for this table: Go to Administration ->
Configure columns. Confirm that the "collection_code" column can be
configured and that configuration choices are applied correctly.
Signed-off-by: Bin Wen <bin.wen@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Any important notes about an order are usually added to the
internal note. This patch makes the note visible on the
acq detail tab in the staff client.
To test:
- Add a basket
- Order something
- Add an internal note for the order
- Go to the detail page of the ordered record
- Switch to the Acquisition details tab
- Verify that with the patch the internal note shows
- Verify that the new column can be toggled using the
column visibility settings
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the "Columns settings" values for the illrequests table
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: Add ability to show / hide columns
This patch adds the "Column visibility" functionality to the main ILL
request list table.
To test:
- Ensure ILL is enabled and you have some requests
- Apply patch
- From the "Koha administration screen, select "Configure columns"
- In the "Columns settings" page:
=> TEST: Ensure an "Interlibrary loans" category exists
- Upon expanding the category:
=> TEST: Ensure a table is displayed showing columns
=> TEST: Ensure the "action" column has "Cannot be toggled"
pre-selected
=> TEST: Change values for columns and ensure they're saved
- From the main staff menu, select "ILL requests"
- In the table:
=> TEST: Click the "Column visibility" button and ensure a modal
containing all columns (except "Action") is displayed
=> TEST: Select various columns and ensure they are shown and hidden
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add user ID to column list
As originally specified in bug 20883, there is a requirement for some
users to be able to display the user ID (borrowernumber) in the UI.
This patch adds that ability to this bug, 20883 will be marked as a
duplicate of this one.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Amendments for rebase
Modify to add the additional changes required now we're rebasing on top
of the dependency tree. Includes adding additional columns (and changing
indexes for search/filter where appropriate)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Add comments to column list
Since this bug is now dependent on Bug 18591 (Allow an arbitrary number
of comments on ILLs) we need to add the comments column to this table
and the list of selectable columns. This patch does this.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 21063: (follow-up) Sanitize datatable data
This mitigates bug 22268 by sanitizing data prior to display using the
built in $.fn.dataTable.render.text() helper provided by Datatables.
The patch was added here, rather that in 22268 since this is the bug
that introduced the problem by increasing the number of fields that are
displayed in the table, some of which could contain user provided
malicious data
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Deduplicate multivalued fields and make sure sort fields are not excessively long. Also updates default mappings so that sort fields are not created for item fields where it doesn't make sense.
Test plan:
1. Reset ES mappings in administration
2. Check that sort is '0' for local-classification in biblio mappings.
3. Change sort back to '1' for local-classification for the next steps.
4. Create a record with 20 items, each with a 100 character long call number
5. Check that when indexed, the record in ES does not have duplicates in any of the item fields and local-classification__sort is truncated to 255 characters.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Have three borrowers, one with order_manage permission, one with
edit_subscription permisson, andone with both
2 - Apply patch, updatedatabase
3 - Verify all three now have the manage_additional_fields permission
4 - Visit the admin page with these users, they should all see the
'Manage additional fields' link
5 - Click the link
6 - User with order_manage should see 'Order baskest'
7 - User with edit_subscription should see 'Subscriptions'
8 - User with both should see both
9 - Remove the additional permissions from a user - they should see a
note about needing additional permissions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A lot of code can be removed just by using Koha::Object
It also makes fetching and updating additional field values easier.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This also moves the admin page for additional fields for all tables to a
single common screen, and factors out display/input parsing logic.
Test plan:
1. Create an additional field for a subscription (under Serials -> Add
subscription fields).
2. Apply patch.
3. Visit Additional fields under administration, and verify that
the field created above still shows under the list for the
subscription table.
4. Create at least four fields for aqbasket for each combination of
searchable/not-searchable and with/without an authorized value.
5. Create an order basket, and verify that all fields are visible and
correctly save.
6. Edit the basket, verifying that changes to these additional fields
are saved.
7. Add an order to the basket (contents are irrelevant).
8. Go to advanced search within acquisitions.
9. Verify that only the searchable fields show in the form, and that
their contents may be searched.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It seemed strange to only add support for Daily loans in the feature
when Koha also support loan periods in hours. This patch adds parallel
functionaliy for hourly loan periods.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Increase test coverage for CanBookBeIssued and fix a introduced during
the refactoring to Koha::Fees.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries would like to be able to charge a rental fee based on the
number of days an item will be checked out, as opposed to the flat fee
currently offered by Koha.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Edit an itemtype, add a daily rental fee of 1.00
4) Check an item of that itemtype out for 7 days
5) Verify the patron now has rental fee of 7.00
Signed-off-by: Matha Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was previously an ambiguity between the branch/category/itemtype
specific max{,onsite}issueqty and the total-per-patron max{,onsite}issueqty.
The latter has been renamed to patron_max{,onsite}issueqty.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set moves maxissueqty and maxonsiteissueqty to the
circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) prove t/db_dependent/Circulation.t
4) prove t/db_dependent/Circulation/Branch.t
5) prove t/db_dependent/Circulation/GetHardDueDate.t
6) prove t/db_dependent/Circulation/Returns.t
7) prove t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
8) prove t/db_dependent/Circulation/TooMany.t
9) prove t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
10) prove t/db_dependent/Reserves.t
11) Note no changes in circulation behavior related to check out limis
both on and off site
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adjust elastic search mappings to more closely match Zebra equivalents
resolving serveral issues with coded Zebra searches in templates and
sorting of search results in UI. Also make field names in search strings
case insensitive to accept case variations in template links and user input.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a separate permission for managing Mana KB.
To test, apply the patch and update the database.
- Open the permissions page for a patron with staff client privileges
- Confirm that there is a "Manage Mana KB content sharing
(manage_mana)" permission.
- Leaving this new permission unchecked, log into the staff client
with as that patron and go to the Administration home page.
- The "Using Mana-KB" link should not appear.
- Navigate directly to /cgi-bin/koha/admin/share_content.pl. You
should get a "permission denied" message.
- Modify the patron's permissions to grant them access to Mana KB.
- Confirm that the link now appears on the Administration home
page and that the user can access the page.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the table of libraries
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Libraries
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the libraries table. Confirm that these
changes are reflected in libraries administration.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the table of patron categories
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Patron categoires.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the patron categories table. Confirm that these
changes are reflected in patron category administration.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a number of changes to the "Pay fines" template, the
goal of which is to make the interface look better in general. Changes
include:
- Styling the "Pay" and "Write off" buttons as Bootstrap buttons.
- Adding DataTables sorting, searching, and filtering.
- Adding a column showing the fine date.
- Hide the "Add note" input, add a link to show it.
- Add some missing "preventDefault" methods from events.
- Add "Writeoff selected" to the buttons which are disabled when there
is no checkbox selection.
- The <tfoot> tag is now expected by the HTML validator to be after
<tbody>, so this section has been moved to suppress validator errors.
To test, apply the patch and locate a patron who has multiple
outstanding fines.
- Go to Fines -> Pay fines
- Confirm that the table of fines is shown as a DataTable, with sorting
on columns which have data.
- Test columns settings in Administration -> Columns settings.
- Confirm that fine dates are shown, and that sorting by this column
works correctly.
- Click an "Add note" link to show a note input field. Focus should be
in the newly-displayed input.
- Confirm that notes are still saved correctly when paying or writing
off single or multiple fines.
- Confirm that when the "add note" input is hidden, its contents are
erased.
- Uncheck all checkboxes by clicking the "Clear all" link at the top.
The "Pay selected" and "Write off selected" buttons should become
disabled.
- Checking any checkbox should re-enable those buttons.
- Test that the relocated "Apply" button (for outstanding credits)
still works as expected.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the hold ratios report
DataTable.
This patch also amends some JavaScript and markup related to some
obsolete jQuery syntax: A hover function was being used to change an
element's style on hover. It has been removed in favor of using a link
and CSS>
To test, apply the patch and view the hold ratios report using a ratio
which will return multiple results. Confirm that DataTables controls
work correctly: Paging, search, column visibility, export and print.
Click a number in the "hold ratio" column of the table and verify that
it populates the "hold ratio" field in the "refine results" form in the
sidebar.
Test setting default column configurations in Administration -> Columns
settings.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The table is used by circulation.pl and moremember.pl
When it is modified we need to take care of the two view.
Test plan:
Use the columns settings to hide/show the "check in" and other columns
Confirm the this patch fixes the display for moremember.pl
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Imo it is much easier to do just "$a ? 1 : 0" than testing defined($a) etc.
in the additional loop.
Less code, more readable?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Validate the input to the fields indicating account
functionality. The only valid values are 1 and 0
non-integer (or integers other than 0/1) are invalid
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Followup change to the mappings syntax from bug 19893. Indexing as phrases allows to properly search for matching headings comprised of multiple subfields (e.g. author name with year of birth).
Sponsored-by: National Library of Finland
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add missing pods, remove obsolete syspref and add test for serialization format for records exceeding max record size
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add persistent per index "index status" state to provide useful
user feedback when update of Elasticsearch server mappings fails
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Default to base64 encoded binary MARC with MARCXML
fallback if record exceeds maximum size
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Implement optimized indexing for Elasticsearch
How to test:
1) Time a full elasticsearch re-index without this patch by running the
rebuild_elastic_search.pl with the -d flag:
`koha-shell <instance_name> -c "time rebuild_elastic_search.pl -d"`.
2) Apply this patch.
3) Time a full re-index again, it should be about twice at fast (for a
couple of thousand biblios, with fewer biblios results may be more
unpredictable).
Sponsored-by: Gothenburg University Library
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TO test:
1 - Check out an item to a patron
2 - Note the columns are misaligned
3 - Apply patch
4 - Updatedatabase
5 - Reload the patron
6 - Note the table is fixed
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes to corrections:
1. The "$raw" filter has been added to the column configuration
2. The columns configuration now specifies which columns are exported in
Copy, Excel, etc. operations.
To test, apply the patch and test the various table export buttons on a
both a closed and open basket. Confirm that the 'Modify' and 'Cancel'
columns are not exported.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=20996
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the table of orders in a basket.
It replaces the "Show all details" checkbox which previously was used to
show the hidden "tax included" columns. Now those columns are hidden by
default in the columns configuration file.
To test, apply the patch and view a basket with multiple orders. Test
all DataTables functionality (paging, sorting, filtering) including
showing and hiding columns.
Test with both an open and a closed basket.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=20996
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
These subs are no longer used from scripts and should be removed. It
should be done on a separate bug report given that additional work is
needed
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently the call number splitting seems to be mostly implemented for
DDC and LC classifications.
Those are both not very common in some countries.
A lot of libraries use their own custom classification schemes so the call number
plitting is something that should be individually configurable.
This enhancement adds the ability to define custom splitting rules based
on regular expressions.
How does it work so far?
From C4/Labels/Label.pm there are 3 differents splitting methods defined, depending on items.cn_source.
if cn_source is "lcc' or 'nlm' we split using Library::CallNumber::LC
if cn_source is 'ddc' we split using a in-house method
Finally there is a fallback method to split on space
And nothing else is done for other cn_source
The idea of this patch is to mimick what was done for the "filing rules" and add
the ability to define "splitting rules" that will be used by the "Classification sources".
A classification source will then have:
* a filing rule used to sort items by callnumbers
* a splitting rule used to print labels
To acchieve this goal this enhancement will do the following
modifications at DB level:
* New table class_split_rules
* New column class_sources.class_split_rule
Test plan:
* Execute the update database entry to create the new table and
column.
I. UI Changes
a) Create/modify/delete a filing rule
b) Create/modify/delete a splitting rule
c) Create/modify/delete a classification source
=> A filing rule or splitting rule cannot be removed if used by a
classification source
II. Splitting rule using regular expressions
a) Create a splitting rule using the "Splitting routine" "RegEx"
b) Define several regular expressions, they will be applied one after
the other in the same order you define them.
Something like:
s/\s/\n/g # Break on spaces
s/(\s?=)/\n=/g # Break on = (unless it's done already)
s/^(J|K)\n/$1 / # Remove the first break if callnumber starts with J or K
c) You can test the regular expressions using filling the textarea with
a list of callnumbers. Then click "Test" and confirm the callnumbers are
split how you expected.
d) Finally create a new classification source that will use this new
splitting rule.
III. Print the label!
a) Create a layout. It should have the "Split call numbers" checkbox
ticked, and display itemcallnumber
b) Use this layout to export labels, use items with different
classification source ('lcc', 'ddc', but also the new one you have
create)
=> The callnumbers should have been split according to the regex you
defined earlier!
Notes:
* The update database entry fill the class_sources.class_split_rule
with the value of class_sources.class_sort_rule
If default rules exist it will not work, we should add a note in the
release notes (would be enough?)
* C4::ClassSplitRoutine::* should be moved to Koha::ClassSplitRule,
but it sounded better to keep the same pattern as ClassSortRoutines
* Should not we use a LONGTEXT for class_split_rules.split_regex instead
of VARCHAR(255)?
* class_sources.sql should be filled for other languages before pushed
to master!
IMPORTANT NOTES: The regular expressions are stored as it, and eval is
used to evaluate it (perlcritic raises a warning about it (Expression
form of "eval"). It can lead to serious security issues (execution of
arbitrary code on the server), especially if the modifier 'e' is used.
We could then remedy the situation with one of these following points:
- Assume that this DB data is safe (We can add a new permission?)
- Assume that the data is not safe and deal with possible attack
Cons: how be sure we are exhaustive? Making sure it matches ^s///[^e/]*$
would be enough?
- Use Template Toolkit syntax instead (Really safer?)
[% callnumber.replace('\s', '\n').replace ... %]
- Cut the regex parts: find, replace, modifiers
like we already do for Marc modification template. Cons: we are going to
have escape problems, the "find" and "replace" parts should not be
handle the same way (think "\n", "\\n", "\1", "\s", etc.)
I did not manage to implement this one easily.
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The script admin/classsources.pl has been adjusted to follow usual
patterns used in other Koha scripts.
$op can be add_source, add_source_validate, etc.
Deletion steps have been removed (there is a JS confirmation box) to
simplify both script and template.
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
The original patch removed the need to add URLs to the template
variables. This patch removes that in the controller.
Bonus: fixes 'html' filter in URL replacing it by 'uri'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
This patch adds a note column to the circ and fine rules to act as a
description line for the rule.
To test:
1) Apply patch, update database (may have to also update schema)
2) Go to Admin -> Circ and fine rules
3) Scroll to the right, notice new Note column
4) Confirm it works to create a brand new rule with a Note
5) Confirm it works to modify an existing rule with a Note
Sponsored-by: Catalyst IT
Lee Jamison <ldjamison@marywood.edu> rescued this patch.
It is a clean re-build of attachments 61865 and 63902
to fix the merge conflict introduced during application of both
attachments.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: macon lauren KohaCon17 <caballeromaricon@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Weight can be defined between 1 and 99.
only search fields mapped with biblios can be weighted
Test plan:
- apply this patch,
- update schema file (perl misc/devel/update_dbix_class_files.pl),
- go to Administration > Search engine configuration,
- in search fields tab, define weights for some fields and save,
- check weights has been saved,
- reset some weights (empty) and save,
- check weights has been reset
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
So far the administration module only allowed for 2 permissions:
- circulation conditions (manage_circ_rules)
- everything else (parameters_remaining_permissions)
With this patch almost every section of the administration page
will have its own granular permission.
To test:
- Create different staff users:
1) One with parameters_remaining_permissions
2) One with parameters
3) One with catalogue and no parameters
4) One superlibrarian
- Apply the patch
- Run the database update
- Check the staff users:
1) All subpermissions, but manage_circ_rules
should be checked
2) Nothing should have changed
3) manage_item_serach_fields shoudl be checked
(page had catalogue permission before)
4) Nothing should have changed
- Try different settings of the permissions and
verify that
- Administration page behaves correctly
- Administration menu behaves correctly
! You shoudl only see what you have permission for
https://bugs.koha-community.org/show_bug.cgi?id=14391
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a consistency issue: we store '@' as the subfield for
fixed-lenght fields, yet on editing '_' is displayed (on the form and
the tab). This was probably done to avoid URI encoding problems in the
past.
This patch restores the '@' everywhere.
To test:
- Open the MARC structure for any bibliographic MARC framework
- Choose Actions > Subfields on any fixed-length field
=> ERROR: Notice the tab has an underscore (_) and the subfield code is '_' as well.
- Cancel
=> SUCCESS: '@' is displayed on the list
- Apply this patch
- Restart all the things:
$ restart_all
- Choose Actions > Subfields on any fixed-length field
=> SUCCESS: '@' is displayed in the tab title, and on the 'Subfield
code' form field.
- Save some changes
=> SUCCESS: Things work correctly.
- Sign off :-D
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
