To test:
1) Apply patch, update database, restart services
2) Enable decreaseLoanHighHolds sysprefs if not already active
3) Go to circulation rules and set a value under 'Decrease loan holds
(day)' that is DIFFERENT from decreaseLoanHighHoldsDuration
4) Check out an item with holds and confirm that the value from the rule
is used instead of the system preference
5) Confirm tests pass before and after the patch
t/db_dependent/DecreaseLoanHighHolds.t
Sponsored-by: Catalyst IT
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds handing for the new values available for the lostreturn
policy settings.
* undef - Do nothing, leave fees and fines as they were at the point of
lose.
* refund - Refund the lost item fee only
* charge - Refund the lost item fee and charge a fresh overdue fine
dated for a return on the date the item is 'found'
* restore - Refund the lost item fee and restore the original overdue
fine (dated for a 'return' on the date the item was 'lost'
Test plan
1/ apply patch
2/ updatedatabase, restart_all
3/ verify finesmode and CalculateFinesOnReturn and WhenLostChargeReplacementFee are on
4/ verify WhenLostForgiveFine is set to "Forgive"
5/ verify circ rules include fines
6/ set Default lost item fee refund on return policy to "Refund lost item charge"
7/ create 4 overdue checkouts that will incur fines
8/ run fines.pl
9/ confirm 4 items checked out with accruing fines
10/ confirm all 4 items have a replacement price
Item 1
11/ mark the first item lost
12/ verify that fine is gone and lost fee has been charged
13/ check item in
14/ verify that lost fee is gone and overdue charge has not returned
Item 2
15/ set Default lost item fee refund on return policy to "Refund lost item charge and charge new overdue fine"
16/ mark second item lost
17/ verify that fine is gone and lost fee has been charged
18/ check item in
19/ verify that lost fee is gone and a new overdue charge has been made
Item 3
20/ set Default lost item fee refund on return policy to "Refund lost item charge and restore overdue fine"
21/ mark third item lost
22/ verify that fine is gone and lost fee has been charged
23/ check item in
24/ verify that lost fee is gone and the old overdue charge has been restored
Item 4
25/ set Default lost item fee refund on return policy to "Leave lost item charge"
26/ mark fourth item lost
27/ verify that fine is gone and lost fee has been charged
28/ check item in
29/ verify that lost fee remains and the overdue charge is still gone
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, the 'Default checkout, hold, and return policy' have a conditional to blank
'holdallowed' when not set, but other rules don't get the same treatment
This patch uses the existing hash that controls the scope of rules and adds a
new parameter 'can_be_blank' Default is assumed to be true, can_be_blank, but if set to '0' then
blank rule values will not be save to the database
To test:
0 - Set CircControl to 'the library the item is from'
1 - Goto to Admin -> Circulation and fines rules and select a library
2 - Under "Default checkout, hold, and return policy" set:
Total current checkouts allowed: 1
Hold policy: Not set
Hold pickup library match: Not set
Return policy: Not set
3 - Save the rule
4 - Check the DB
SELECT * FROM circulation_rules WHERE branchcode = 'BRANCHCODE'
using the branchcode for the library you chode
5 - Note returnbranch, and hold_fulfillment_policy rules exist with blank value
6 - Set 'All libraries'->'Default checkout, hold and return policy'->'Item floats'
7 - Checkin an item from the library with blank rules at another library
8 - It returns home rather than floating
9 - Apply patch and restart all the things
10 - Reload the page and save the rules as before
11 - Check the DB and note the rules no longer exist
12 - Check in the item, it floats!
13 - prove -v t/db_dependent/Koha/CirculationRules.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces all calls to RefundLostItemFeeRules with
Koha::CirculationRules->get_lostreturn_policy and removes the module it
makes redundant.
Test plan
1/ Confirm that there are no longer any uses of RefundLostItemFeeRules
in the codebase
2/ Confirm circulation tests still all pass
3/ Confirm you can still set and unset the lost return rules
4/ Signoff
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value $maxsuspensiondays in string eq
at /admin/smart-rules.pl line 257.
But that not just undef-warning, there is broken logic,
these two lines are mutually contradictory and goes one-by-one:
$maxsuspensiondays = undef if $maxsuspensiondays eq q||;
$maxsuspensiondays = '' if $maxsuspensiondays eq q||;
Fix is simple: to make it '' if it comes undef.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value in string eq at /admin/smart-rules.pl line 289.
It is solved by one line added to exclude comparison with 'on' string
when variable is 'undef'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
Use of uninitialized value in hash element
at /admin/smart-rules.pl line 569.
that happened because we have NULLs in SQL results for 'categorycode'
and 'itemtype' which later used as 'any' kind of category/item in the
template, so for the template it passed this way:
$rules->{ $r->{categorycode} }->{ $r->{itemtype} }->...
but undef will stringify as "" to become a hash key ("Hashes are
unordered collections of scalar values indexed by their associated
string key" https://perldoc.perl.org/perldata.html),
that's why "undef warning". To prevent warning here is the simple fix:
$rules->{ $r->{categorycode} // '' }->{ $r->{itemtype} // '' }->...
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warning emitted:
CGI::param called in list context from /admin/smart-rules.pl line 262,
this can lead to vulnerabilities. See the warning in "Fetching the value
or values of a single named parameter" at CGI.pm line 412.
Explained here: https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameter
And because all these params are not multi-params, so simple "scalar .."
forcing for CGI->param is the fix. Changes are transparent and same
values should be assigned as before, just no more warnings.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In code CGI param 'no_auto_renewal_after_hard_limit' assigned to
"$no_auto_renewal_after_hard_limit" var, and then just in the next line
again variable "$no_auto_renewal_after_hard_limit" reassigned with
call to same "$input->param('no_auto_renewal_after_hard_limit')".
Fixed. No logic or results should be changed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the new circulation rule that's introduced from
useDaysMode to daysmode to improve consistency with other rule names.
We also update the accessors and code using them to reflect the new
term.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Institute of Technology Carlow
Signed-off-by: Simon Perry <simon.perry@itcarlow.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
returnbranch has to pass an itemtype key when setting the rule (here
setting it to unlimited for any item types)
Test plan:
1. Go the "Circulation and fine rules" admin page
2. Set a rule for "Default checkout, hold and return policy"
3. Unset it
4. Select a library
5. Set a rule for "Default checkout, hold and return policy"
6. Unset it
Display should be consistent with what you selected
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
NO_LIBRARY_SET was used when the DB user was logged in. Since bug 20489
it's not longer possible. We could remove the code.
One occurrence left in C4::InstallAuth as there is no (real) logged in user yet.
Test plan:
* Install Koha to make sure NO_LIBRARY_SET is not needed during the
install process
* Login into Koha
* Make sure the your library's name is displayed correctly in the header
* Set another library
* Confirm that the library's name is updated
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problem during install, nor changing library.
Fixed (pre-existing) tab in circ/branchtransfers.pl
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This removes code duplication by introducing a new subroutine
strip_non_numeric() that removes whitespace and makes the rule value
'' if it is a string value instead of a digit. The call to
strip_non_numeric() is now added also to all the rules it is needed
in.
To test:
1. Write some string like "test" to rules:
- Current checkouts allowed
- Current on-site checkouts allowed
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
- Holds per record (count) – can be found in default policy
2. Save rules
3. Apply patch
4. Edit the rule line where you just typed all those strings and save
5. Notice how the values are now empty strings (some say "unlimited" but
if you go check from DB it should show empty value there)
Sponsored-by: The National Library of Finland
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Without this it is not possible to make for a specific patron category
or itemtype a more specific unlimited holds_per_day rule if you have a
catch all rule (categorycode = *, itemtype = *) with limited
holds_per_day value.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The "Clone these rules" feature in admin/smart-rules.pl was
dropped. This re-implements the cloning using Koha objects.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The previous patch modifies:
- categorycode => undef,
- itemtype => undef,
- branchcode => $branch,
+ branchcode => undef,
But in that condition $branchcode is not '*' and so we should not set it
to undef
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This necessitates moving the circ rules from using '*' to using
undef/NULL.
Signed-off-by: Minna Kivinen <minna.kivinen@hamk.fi>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch will move the list item refund rules from a dedicated table to the circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Verify lost item refund rules remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1) Set all values in Default checkout, hold and return policy section on
circulation rules admin page, try for all libraries and for one specific
library. Save.
2) Click on unset and confitm
--> without patch, the Maximum total holds allowed value remains
--> with patch the unset removex Maximum holds value too
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test Plan:
1) Apply dependancies
2) Apply this patch set
3) Run updatedatabase.pl
4) Ensure holdallowed and hold_fulfillment_policy rules behavior remains unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Agustin Moyano <agustinmoyano@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Unfortunately, the tables here can't use a foreign key as one table uses null where the other uses
'*' This patchset alters the delete method so delete related rules. It is somewhat of a workaround until
all the columns in issuingrules are moved to circulation_rules
To test:
1 - Add some issuing rules in koha, making sure to set maxissueqty
2 - Check the DB: SELECT * FROM circulation_rules;
3 - note some circulation rules were created
4 - Delete your rules via the staff interface
5 - Check the DB, the circulation rules remain
6 - Apply patch
7 - Repeat
8 - Huzzah! The rules delete!
9 - Prove the tests, read the code
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Go to Admin->Circulation and fines rules
2 - Set All/All rules ot have a limit for Current checkouts allowed (and onsite checkouts allowed)
3 - Select an itemtype to add a new rule
4 - Save without entering any values
5 - Note that new rule displays with the same numebr as the all/all rule
6 - Check the DB, not no lines were added to circulation_rules table
7 - Delete the rule from the staff client
8 - Apply patch
9 - Repeat, note the new rule is unlimited
10 - Run selenium tests
11 - They pass!
12 - Check no rules/itemtypes are added to your system by the tests
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was previously an ambiguity between the branch/category/itemtype
specific max{,onsite}issueqty and the total-per-patron max{,onsite}issueqty.
The latter has been renamed to patron_max{,onsite}issueqty.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set moves maxissueqty and maxonsiteissueqty to the
circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) prove t/db_dependent/Circulation.t
4) prove t/db_dependent/Circulation/Branch.t
5) prove t/db_dependent/Circulation/GetHardDueDate.t
6) prove t/db_dependent/Circulation/Returns.t
7) prove t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
8) prove t/db_dependent/Circulation/TooMany.t
9) prove t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
10) prove t/db_dependent/Reserves.t
11) Note no changes in circulation behavior related to check out limis
both on and off site
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a note column to the circ and fine rules to act as a
description line for the rule.
To test:
1) Apply patch, update database (may have to also update schema)
2) Go to Admin -> Circ and fine rules
3) Scroll to the right, notice new Note column
4) Confirm it works to create a brand new rule with a Note
5) Confirm it works to modify an existing rule with a Note
Sponsored-by: Catalyst IT
Lee Jamison <ldjamison@marywood.edu> rescued this patch.
It is a clean re-build of attachments 61865 and 63902
to fix the merge conflict introduced during application of both
attachments.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: macon lauren KohaCon17 <caballeromaricon@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff UI correctly handle the holds_per_day
configuration.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Ensure that you have four users:
a) A superlibrarian
b) A user with all `parameters` permissions (the toplevel `parameters`
box is checked).
c) A user with the `manage_circ_rules` permission (and, of course,
`catalogue`).
d) A user with the `manage_circ_rules`, `manage_circ_rules_restricted`
and `catalogue` permissions.
2) As all four users, load the "Circulation and fine rules"
administration page (admin/smart-rules.pl).
3) The page should be unchanged for the first three users. It should be
possible to view and edit the circ rules for all libraries.
4) The last (restricted) user should only be able to view and edit the
circ rules for their own library.
Amended by JD: In a second version of this patch
manage_circ_rules_restricted has been replaced by
manage_circ_rules_from_any_libraries and 'no_inherit' related code has
been removed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::CirculationRules->get_effective_rule will become the method to
call to retrieve a specific rule, we should start using it when
possible.
Moreover undef could replace '*' to mean 'any', that way we will be able
to add FK on circulation_rules
TODO: Add more tests
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also, fix a couple small QA issues.
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is the first step in the circulation rules revamp as detailed
in the RFF https://wiki.koha-community.org/wiki/Circulation_Rules_Interface_and_Backend_Revamp_RFC
This patch moves the recent max_holds rule to the new circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Instead of saving the state locally in a variable during Plack lifetime,
we move the saved hash to the cache. We clear the key when we enter
smart-rules.pl. This makes a change in circ rules immediately effective.
Test plan:
Run the modified tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When updating max_holds should be before the categorycode in the update
query.
Things that can be found by testing :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes silent crash when adding the same category twice.
DBD::mysql::st execute failed: Duplicate entry 'ST' for key 'PRIMARY' [for Statement "
INSERT INTO default_borrower_circ_rules
(categorycode, maxissueqty, maxonsiteissueqty, max_holds)
VALUES (?, ?, ?, ?)
" with ParamValues: 0="ST", 1=undef, 2=undef, 3="3"] at /usr/share/koha/devclone/admin/smart-rules.pl line 309.
(Line number affected by bug 15524.)
Very trivial solution.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
