When renewing a patron from the patron details page, ensure that
the "Patron's account has been renewed until XXX" is actually
displayed.
This patch introduces a was_renewed CGI and template parameter
to clarify the intent of the relevent template sections.
To test:
- Before applying the patch, renew a patron from the patron
details page and verify that you don't see the renewal confirmation.
- After applying the patch, renew the patron from the details page
and verify that the "Patron's account has been renewed until XXX"
message shows up.
- Renew the patron from the checkout page and verify that the confirmation
message shows up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Message now displays for both tabs.
Fixed tab to make QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When OpacMaintenance is on, any opac page will redirect to maintenance.pl.
Some pages of intranet have the same behavior and you get 404 error.
This is because in checkauth, if type arg is undefined it is "opac" by default.
This patch adds type arg in all intranet calls of checkauth.
Test plan :
- Set syspref OpacMaintenance=Show
- Go to a borrower page
- Click on "Fines" and "Create manual invoice"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Click on "Fines" and "Create manual credit"
- Enter an amount and save
=> Check you go to members/boraccount.pl and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Restricted" to yes and save
- Click on "Lift restriction" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
- Edit borrower
- Set "Expiry date" to a day in the past and save
- Click on "Renew" in messages
=> Check you keep in member page and not maintenance.pl with 404 error
OK
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Good catch, a tricky bug.
http://bugs.koha-community.org/show_bug.cgi?id=9952
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed a few tabs from mancredit.
All tests and QA script pass now.
Good test plan.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch corrects several uninitialized value errors.
Test plan:
- Edit a borrower
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Edit an organisation (depends on borrower category)
- Enter a surname using lowercase (it will be displayed uppercase by CSS) and save
=> Borrower surname is uppercase
- Go to a borrower page who has today issues
- Click on More/Export today's checked in barcodes
=> You get a file to dowload
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up reinstates or add check for undef returned
by C4::Context->userenv, only where previous patch touch
code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, if $ENV{DEBUG} is set (for example to 1), the debug level
will be printed on the Add/Edit Patron pages (memberentrygen.tt) in the
form of: "Debug is on (level 1)".
While many if not most folks might not set $ENV{DEBUG} on a production
system, there is no reason to have this information printing on the
member template(s).
No where else in Koha is there a template that prints $ENV{DEBUG}
information, with the exception of calendar.inc, although that doesn't
activate until at least debug level 2 or 5, so it might be worth holding
on to. It is certainly more complicated than simply printing the debug
level. I don't do development on the calendars, so I'm not going to
address that one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The subroutines writeoff() and get_writeoff_sth() (and the two package
variables $writeoff_sth and $add_writeoff_sth) defined in members/pay.pl
are not used at all.
To test:
1) View members/pay.pl by looking at the record of a patron who has
at least seven fines/fees and clicking the "Pay fines" tab after
clicking the "Fines" tab on the left side
2) Write off a single item in the table on members/pay.pl using the
button labelled "Write off"
3) Pay a single fine by clicking the "Pay" button
4) Pay a portion of a fine by selecting a checkbox on one of the lines
in the table and clicking the "Pay amount" button
5) Select two lines in the table and click the "Pay selected" button
6) Write off all remaining fines
If all your actions show up in the table on the Account tab, this patch
works.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Write off fines as various branches
2) Observe the stats lines include the wrong branchcode
3) Apply patch
4) Repeate step 1
5) Observe the stats lines include the correct branchcode
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Also tested by changing branch and writing off again - all
tests pass.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked individual and complete write off for different branches.
Write offs were always recorded correctly for the logged in branch.
All tests and QA script pas.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
For a duplicated patron, the "Saluation" information
is now empty by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a patron lives at 4345 Library Rd, a search on Street Address for
Library should find it. However, it does not, but a search for 4345
Library does. This patch adds a "Search Type" drop-down, defaulting
to the current behaviour.
To test:
1) Search for a patron based on a non-leading part of a field.
2) Should return no results.
3) Search again with "Search Type" of "Contains".
4) Should return the patron.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moving text of an error message from the script into the
template. To test, submit an amount which is greater
than the amount due. You should see an error message
displayed correctly with a properly-formatted currency
amount.
Signed-off-by: Marc Veron <veron@veron.ch>
Patch behaves as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The staff client has two almost identical include files which
can be consolidated: circ-toolbar.inc and members-toolbar.inc.
This patch marges the slight differences between them and
eliminates circ-toolbar.inc, that being the one which was used
on fewer pages.
In order to accommodate the different "destination" variable
for operations which redirect back either to circ or patrons,
circulation.pl defines "destination" in the template.
Revision corrects a redirect error in setstatus.pl which
predates this patch but which never showed up until now.
To test, perform various operations from the toolbar on at least
two pages: circulation.pl and moremember.pl.
Operations: Edit, add child, duplicate, change password, print (all
options), search to hold, renew, set permissions, delete, update child
to adult, and export checked-in barcodes. In most cases simply
confirming that the link takes you to the right place is enough.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- Adding simple style to register link on home page
- Adding unique ids to new pages and to blocks containing
registration links
- Adding better page titles and breadcrumb links to some pages
- Correcting bug which meant incorrect message showed on registration
page when OPACPatronDetails preferences is turned off
- Passing patron details to opac-memberentry.tt so that patron's
name can be displayed in breadcrumbs
- Improving display in staff client of patron record updates
waiting to be approved.
- Adding a sort by name to output of pending patron record updates
- Adding updated JqueryUI library files to include expanded widget
options.
The changes in this patch require the addition of the jQueryUI
Accordion widget. Other pending patches are seeking to add
enough of the other remaining missing widgets that it seems time
to go ahead and add the rest.
Future submissions which add usage of these widgets will have
to be careful to make changes to Koha's CSS where necessary.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the "alphabet" syspref, which can hold a space separated list
of charachters, which can be expanded into browse links when needed.
To test:
- Make sure to run updatedatabase
- Check that the "alphabet" syspref was added under "I18N/L10N preferences"
- Check that browse links are displayed Home › Patrons
- Add some weird charachters like ÆØÅ to "alphabet" and check that the
browse links are still displayed ok
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Stéphane Delaune <stephane.delaune@biblibre.com>
Signed-off-by: Marc Veron <veron@veron.ch>
NOTE: After applying the patch I got following errors in members/pay.pl:
Global symbol "$writeoff_sth" requires explicit package name
Global symbol "$add_writeoff_sth" requires explicit package name
Added to lines at the begin of members/pay.pl:
our $writeoff_sth;
our $add_writeoff_sth;
Now the patch worked as expected.
However I am not quite sure if signing off is OK in this situation.
Marc
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetAllIssues can produce large lists
For performance purposes:
Dont loop over the list without cause
Dont do expensive processing in the loop
Dont needlessly copy the array
Do display formatting in the template
Dont extract the barcode list unless we are producing it
Reduce db calls by using the data to hand
Make the table in the template a bit more readable
where everything was stuffed into one line
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
.. by blanking cardnumber in the code and showing it in the template,
instead of just not showing it in the template
Autobarcode now correctly fills in on a duplicated patron.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adding the necessary code for patron image, patron
home library, patron category description, and patron
extended attributes to show in the left-hand sidebar.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adding back the line in the script which pulls the name
of the branch where the item was checked out.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
dcook: fixed SQL error and removed blank targets
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Thanks. Works as described. Valuable addition on patron information
page.
Ideas of enhancement:
- For some library, and some patron, the routing lists table could be
very long, and a paged table would be a plus.
- In the table, a new Vendor column.
- The possibility to sort the table entries by Title and Vendor column.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Works as expected. Fields with disallowed characters do not show up.
Added 'if $debug' to an pseudo-unconditional warn.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, error message reports an age range in English. For example '0 to
17'. With this patch, the 'to' is not in the .pl file anymore.
Ruth could you sign-off this fix?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch works around the redefinition of an array that was causing the
enforcement of age ranges to not-happen.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the bug and the solution.
As noted in comment #4 by Jonathan Druart, this should be fixed in every call
to DateTie::truncate function. This patch does exactly that.
julian_m tested that truncate( to => 'days' ) didn't actually do anything, so
it is understandable that this 'fix' might introduce new bugs as we might have
'fixed' at a higher libs level this issue.
'minutes' is used in truncate function too, so fixing.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to attach unlimited arbitrary files to
a borrower record.
Test Plan:
1) Enable system preference EnableBorrowerFiles
2) Look up borrower record, click 'Files' tab on left
3) Upload a file, download the file, delete the file.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
rebased for current master.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
rebased again; some indentation issues in include menus.
Comparation of date and datetime is always false
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Exported file contains the list of checked in items.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds a new 'statistics' tab in the Patron module.
For a borrower, this tab contains a table with:
- number of checkout for today
- number of checkin for today
- "precedent state", the number of checkouts the patron had yesterday on
its library card
- "actual state", the number of checkouts on the borrower card at the current date
A new syspref (StatisticsFields) contains a list of fields (separated by
pipe (|) on which the table results is based. The default value is
location|itype|ccode
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Caused by code assuming a the variable $err is a hashref
when it is only a hashref if there is an error.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* Switch from C4::Dates to $KohaDates
* Fix 'Resume All Suspended All Requests'
* Change button text to follow capitalization rules
* Change 'requests' to 'holds'
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 112.
Variable "$borrower" is not available at /srv/koha/members/pay.pl line 129.
Variable "$input" is not available at /srv/koha/members/pay.pl line 142.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 157.
Variable "$user" is not available at /srv/koha/members/pay.pl line 171.
Variable "$input" is not available at /srv/koha/members/pay.pl line 172.
Variable "$input" is not available at /srv/koha/members/pay.pl line 181.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 187.
Variable "$branch" is not available at /srv/koha/members/pay.pl line 187.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 222.
Variable "$input" is not available at /srv/koha/members/pay.pl line 239.
Variable "$borrowernumber" is not available at /srv/koha/members/pay.pl line 246.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
* group some attributes for a more friendly display
* allow a link between a borrower category and an attribute to display
it only for the specified category
* Attr classes filled with AV 'PA_CLASS' category (you have to create AV
with a new category 'PA_CLASS' to fill class list)
this patch add 2 fields in borrower_attribute_types :
category_code
class
Signed-off-by: Julien Sicot <julien.sicot@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This commit fixes writeoff_all to write off only the amount outstanding
for each fine being written off, rather than the original amount owed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Currently, the subroutine writeoff lives in pay.pl, which
is a violation of the Koha coding guidelines, as it writes
to the database. This commit restructures and moves writeoff
to C4::Accounts::WriteOff(), and modifies pay.pl to use it.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Koha was writing off the value of accountlines.amount rather
than the value of accountlines.ammountoutstanding.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested all three patches together and was able to write off single
and multiple fines and the data was correct in the stats table.
Implements following points from the wiki page List permissions:
5) Delete or move list information when deleting a patron.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
This adds a new syspref: AllowPKIAuth. It can have one of three states:
* None
* Common Name
* emailAddress
If a) this is set to something that's not "None", and b) the webserver
is passing SSL client cert details on to Koha, then the relevant field
in the user's certificate will be matched up against the field in the
database and they will be automatically logged in. This is used as a
secure form of single sign-on in some organisations.
The "Common Name" field is matched up against the userid, while
"emailAddress" is matched against the primary email.
This is an example of what might go in the Apache configuration for the
virtual host:
#SSLVerifyClient require # only allow PKI authentication
SSLVerifyClient optional
SSLVerifyDepth 2
SSLCACertificateFile /etc/apache2/ssl/test/ca.crt
SSLOptions +StdEnvVars
The last line ensures that the required details are
passed to Koha.
To test the PKI authentication, use the following curl command:
curl -k --cert client.crt --key client.key https://URL/
(look through the output to find the "Welcome," line to indicate that a user
has been authenticated or the "Log in to Your Account" to indicate that a
user has not been authenticated)
To create the certificates needed for the above command, the following series
of commands will work:
# Create the CA Key and Certificate for signing Client Certs
openssl genrsa -des3 -out ca.key 4096
openssl req -new -x509 -days 365 -key ca.key -out ca.crt
# This is the ca.crt file that the Apache config needs to know about,
# so put the file at /etc/apache2/ssl/test/ca.crt
# Create the Server Key, CSR, and Certificate
openssl genrsa -des3 -out server.key 1024
openssl req -new -key server.key -out server.csr
# We're self signing our own server cert here. This is a no-no in
# production.
openssl x509 -req -days 365 -in server.csr -CA ca.crt -CAkey ca.key \
-set_serial 01 -out server.crt
# Create the Client Key and CSR
openssl genrsa -des3 -out client.key 1024
openssl req -new -key client.key -out client.csr
# Sign the client certificate with our CA cert. Unlike signing our own
# server cert, this is what we want to do.
openssl x509 -req -days 365 -in client.csr -CA ca.crt -CAkey ca.key \
-set_serial 02 -out client.crt
openssl pkcs12 -export -in client.crt -inkey client.key -out client.p12
# In theory we can install this client.p12 file in Firefox or Chrome, but
# the exact steps for doing so are unclear, and outside the scope of this
# patch
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested with Common Name and E-mail authentication, as well as with PKI
authentication disabled. Regular logins continue to work in all cases when
SSL authentication is set to optional on the server.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
QA comment: synchronized updatedatabase.pl version of syspref with sysprefs.sql
version, to avoid divergent databases between new and upgrading users.
to export a file containing a list of checkin barcode for the current day.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- Fix sql syntax error
- Fix Encoding
- SendAlerts must return an error if no email is defined
- Get error if no email in memberentry
http://bugs.koha-community.org/show_bug.cgi?id=7001
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This commit adds a new pulldown field to the patron quick search.
This pulldown "Search Fields" can have any number of field combinations
to search on. The combinations added in this commit are:
Standard: Default, searches on original fields
Email: Searches on email, emailpro, and B_email
Borrower Number: Searches on borrowernumber
Phone Number: Searches on phone, phonepro, B_phone, altcontactphone, and mobile
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested by running searches on all the new fields, and the old fields
with limits on branch and category. The seach on phone number could be
a bit more inclusive, but it works with and without symbols so I
give my sign off on this patch.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Documentation should note that phone numbers should be searched only on the
numbers of a phone number, and separate the area code and exchange with spaces,
regardless of how the number is entered in the database.
So no dashes or parentheses in the phone search, and the last 7 search works with spaces, i.e. xxx xxxx.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested per test plan.
Passes prove xt t t/db_dependent
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch changes the password field to a password type input on
member-password.pl and adds a confirmation field to both member-password.pl
and memberentry.pl requiring that the password be re-entered to
confirm.
Client-side and server-side validation for the two password fields has been added
to both pages. Multiple error messages can now be displayed together on
member-password.pl.
If the user wishes for Koha to suggest a random password on member-password.pl
they can click a link which will remove the password-type input fields, replace
them with text-type fields, and automatically fill them with the random
password suggestion.
Follow-up fix lets the members.js correctly handling errors when there are
no mandatory fields
LR followup: fixing slight error that corrects previously reported template error.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested password setting/changing utilities - all work as expected and described.
Passes prove t xt t/db_dependent tests congruent with current master failures (adds no new fails).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The 'Add Child' button is not shown if 'borrowerRelationship' is empty.
System preference description changed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with example from bug and by deleting parts of it:
cardnumber|surname|firstname|title|othernames|initials|streetnumber|streettype|address|address2|city|state|zipcode|country|email|phone|mobile|fax|emailpro|phonepro|B_streetnumber|B_streettype|B_address|B_address2|B_city|B_state|B_zipcode|B_country|B_email|B_phone|dateofbirth|branchcode|categorycode|dateenrolled|dateexpiry|gonenoaddress|lost|debarred|contactname|contactfirstname|contacttitle|borrowernotes|relationship|sex|password|userid|opacnote|contactnote|sort1|sort2|altcontactfirstname|altcontactsurname|altcontactaddress1|altcontactaddress2|altcontactaddress3|altcontactstate|altcontactzipcode|altcontactcountry|altcontactphone
Note: This only affects the edit screen, not the patron detail tab.
A nice enhancement would be to make this page follow the system preference too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
QA comments on Bugzilla. Passing QA.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
* DBrev defined
* small improvement suggested by Marcel added = there is now a link to the schema page on the systempreference
* correctly indenting with tab the debarrcomment field
* setdebar.pl is called without status parameter, thus it is not working anymore. It's fixed & some dead code has been removed. To test : debar someone, then go to patron detail page and click "lift debarment"
* the test function had not been updated. The fix define a debarment date of 2099-12-31 (no limit)
Some code coming from BibLibre has been lost in the process of inclusion in
3.4. The result is that fine in days does not work at all (you can setup rules,
but it does nothing)
Step to reproduce:
- Koha > Admin > circ rules > set 1 day fine every day of overdue for default
rule
- Issue a book return date last week
- check-in the book => no debarment is set
The following patch will fix all of those problems by :
* updating borrowers.debarred to a date field (instead of tinyint). It contains
the limit of the debarment
* changing API of DebarMember and UpdateBorrowerDebarred to pass a date
* display debarrdate where applicable. Note that a debarrdate of 31/12/9999 is
considered as unlimited and not displayed
* added a debarrcomment, usefull to explain why a patron is debarred (this is
independant from debarrdate changes and can be used when placing an unlimited
debarment too)
[2011-05-12] F. Demians. It works as described. And I can confirm this
functionality is impatiently awaited by French libraries since one year. Thanks
BibLibre for the good work and for contributing this code.
Bug 6328 Followup--update DB structure
Thanks Katrin.
Bug 6328: make comment a textbox / fix debar by notice trigger
Debarring by notice triggers was broken, because the new function
expects a date as second parameter.
The comment field in patron account details was a very long text field.
Patch changes it to be a textbox instead.
Bug 6328: Lift debarment leaves patron account
'Lift debarment' redirects to an empty circulation page.
BZ6328 follow-up 3
Fixes comment 23 from Fernando L. Canizo : when the patron was debarred and debar removed
he still could not check-out.
The changes in the IsMemberBlocked (that were on biblibre/master) were lost somewhere
The sub was still checking for old_issues instead of calling CheckBorrowerDebarred
to get a debardate if applicable
Note : this bug was appearing only is you had issuing rules defined for itemtype/categorycode/branch.
Seemed to work if you had only default rules. That's probably why it hadn't been spotted before
BZ6328 follow-up 4
Comments fron Zeno Tajoli: The patch is OK and I sign-off it. Two little changes done on
installer/data/mysql/kohastructure.sql and installer/data/mysql/updatedatabase.pl
Signed-off-by: koha <koha@kohabase.localdomain>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as advertised, doesn't affect display for non-organisational patrons.
Note: Display change in OPAC only affects the summary tab.
It would be a little bit more consistent to make the name show the
same on all tabs in OPAC patron account.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I repeated Katrin's signoff here (with permission). The patch only changed for some minor rebasing and cosmetic QA requests. Passed QA now.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds 'email' to valid search parameters in members/member.pl
To test:
1. give a patron a unique email address in your test database
2. search on the full email; should work
3. search on the part of the email before the domain; should work
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
This patch adds a check for the value of the ExtendedPatronAttributes
preference to the scripts and corresponding logic to the templates
controlling the sidebar menu.
The patch also corrects a duplication of attributes code in moremember.pl
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Added extended patron attributes in configuration, turned ExtendedPatronAttributes on
2) Altered patron details, added values for patron attributes
> Verified patron attributes show show correctly
3) Turned off ExtendedPatronAttributes
> Verified patron attributes were hidden everywhere
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removed SearchMembers() and replaced with more generic Search()
Amended Search() to try cardnumber first
Replaced SearchMembers() calls with Search()
Replaced SELECT with Search() where appropriate
C4::SQLHelper:
- added support for '' key for search filter.
- when passing an array to filter, join with OR (rather than AND)
- added support for key => [val1, val2] in filter
- did not document - there was no input documentation to start with,
and SQLHelper should be replaced with something better anyway
Signed-off-by: Liz Rea <lrea@nekls.org>
(again - testing merge issue)
The functionality of the patch seems to be maintained with Biblibre's changes.
I tested the following:
Extended attribute searching: works
3 part name searching: works
2 part name searching: works
1 part name searching: works
From:
mainpage.pl
members-home.pl
Patron search limited by branch: Works
Patron search limited by patron category: works
Ordering by cardnumber instead of surname: works
The "Check Out" field in the masthead.
Circ Autocomplete is not reliably functional at this time, but the problem appears to predate this patch.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Explicitly specifies which fields to return in C4::Overdues::checkoverdues
SQL: all of biblio, items, and issues, and everything in biblioitems
EXCEPT marc, marcxml and timestamp.
Bug 6801: member details page taking long time to load when many checkouts present
This patch removes the call to GetMemberDetails in build_issue_data; this heavy-weight
subroutine was being run for every single item a patron (or their relatives) have checked out.
Instead, the borrowers first name, surname and cardnumber are added to the GetPendingIssues query.
I believe this is reasonable since GetPendingIssues can now return issues for multiple borrowers.
Also corrects the $borrowernumber used for GetIssuesCharges and CanItemBeRenewed; was using the borrower whose
page we were on, NOT the borrower of that specific item (which would be different in the Relatives Checkouts tab).
Template calls to [% scope.borrowername %] are now broken up into [% scope.firstname %] [% scope.surname %].
Signed-off-by: Liz Rea <lrea@nekls.org>
On my test data, a patron with 180 checkouts (without this patch) would take more than a minute to bring back the circulation.pl and moremember.pl pages.
With this patch, the time is reduced to 5 or so seconds.
Big ups to Ian for tenaciously hunting this one down.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Show patron attributes in the sidebar on circ and patron pages
[Edit from Owen Leonard: This patch takes changes originally in
Bug 5436 and isolates just the parts relating to display of
patron attributes. Because function for pulling patron attributes
was merged with the function for displaying address information
in SetMemberInfosInTemplate() (also found in Bug 5749), I moved
the call to GetBorrowerAttributes into the individual scripts.
That keeps the functionality relating specifically to patron
attributes separate from the proposed changes to displaying
addresses.
Because I think it's important to keep the display consistent,
I added display of patron attributes to all pages which include
the patron information sidebar.]
Rebased for compatability with bug 3489 and database documentation by
Ian Walls, 9-21-11
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Changes to notices tab to make it a full replacement for messages tab.
Removes messages tab from patron account.
- repairs view of patron address in left column (category description, branch)
- shows some explanation, when there are no messages for a borrower
- makes the notice an expandable field, a click on the subject will
expand the field to show the message content
- makes message status and message transport type translatable,
by moving the possible values into the template
- removes the messaging tab from various menus
- removes the files that were associated with the messaging tab
- preserves the line breaks in message content to improve readability
Also fixes Bug 6593 - Some information missing from the "Notices" tab.
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds "checked out from" column to the right of "checked out on" on both
circ/circulation.pl and members/moremembers.pl. Columns are sortable with tablesort
(though only on circ/circulation.pl if syspref enabled).
The branch name is sourced from issues.branchcode.
EDIT BY Owen Leonard: Adjusting table columns which are sorted by default
to accommodate the new column.
Things look good! Thanks!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Allow partial payment of outstanding fines
against either individual fine entries or as a lump payment
Sponsered by East Brunswick Public Library, East Brunswick, NJ, USA
NB: Adds a version of the include circ-menu.inc as circ-menu.tt
this has the same functionality as the old include but does not
require all the borrowers attributes to be passed as global
scoped variables
Signed-off-by: Liz Rea <lrea@nekls.org>
Bug 3498 - Documentation update to explain what every button does.
Help file updated to the following:
Pay and Writeoff Fines
Each line item can be paid in full, partially paid, or written off.
Pay a fine in full
Click "Pay" next to the fine you want to pay in full
The full amount of the fine will be populated for you in the "Collect From Patron" box
Click "Confirm"
The fine will be removed from outstanding fines, and displayed as fully paid.
Pay a partial fine
Click "Pay" next to the fine you want to partially pay
Enter the amount you are collecting from the patron in the "Collect From Patron" box
Click "Confirm"
The fine will be updated to show the original Amount, and the current Amount Outstanding
Writeoff a single fine
Click "Writeoff" next to the fine you wish to writeoff.
The fine will be removed from outstanding fines, and displayed as fully paid.
Pay an amount towards all fines
Click the "Pay Amount" button
Enter the amount you are collecting from the patron in "Collect from Patron." The sum of all fines is shown in "Total Amount Outstanding"
Click "Confirm"
The fine totals will be updated with the payment applied to oldest fines first.
Writeoff All fines
Click the "Writeoff All" button
All fines will be removed from outstanding fines, and displayed as written off.
Pay Selected fines
Check the selection boxes next to the fines you wish to pay, click "Pay Selected"
Enter an amount to pay towards the fines.
Click "Confirm"
The fine totals will be updated with the payment applied to the oldest selected fines first.
Bug 3498 - adding parens to TT IF Statements for style
pay.tt
Bug 3498 - Add parens to TT IF statements for style
paycollect.tt
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When adding a patron who is a child, the default library is not set when defining a guarantor, this patch corrects the problem.
More, for children with no guarantors, the default branch is the editing branch.
BibLibre MT5795
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Change to parameter list in GetPendingIssues made it
callable by an empty list resulting in invalid sql being
sent to server. As this was occuring on most issues error log
was filling up. Put safeguard in the routine
Also don't bother calling when you have no need
Some of the processing was needlessly obscure
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Now a blank cardnumber will get stored as a null in the database, which
is a value that allows duplicates. As such, if cardnumbers aren't
mandatory, then you can actually save a user with it being blank.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
If a guarantor search is not being performed, the creation of any Child category_type patron will
not default to the currently logged in branch, but rather the first branch alphabetically.
Adding a test for the existence of any guarantor branch data before assigning it clears up this problem
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Moving columns around to match display of patron's own checkouts
- Correcting terminology (issues, borrowers)
- Hiding columns added in previous patch which do not display in
the standard checkout list: materials, stock number, collection.
If these are to be added they should be added to all displays.
[edit] Adding display of relative's cardnumber alongside their name
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
messaging and notices patron tabs were not passing borrower
info in a manner consistent with other tabs
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adding state variable to various circ and member pages so that
sidebar display of patron details includes state.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Duplicate of '[PATCH] MT3747: Shows member relatives in issueslists' : Subject was wrong
MT3747, Follow-up: Adds siblings issues
MT3747, Follow-up: Shows member relatives in issues lists
- Now displays patron's and relatives' issues apart
MT3747, Follow-up: Shows member relatives in issues lists
- Removes renewal in circulation.pl
- Adds links to moremember.pl
MT3747, Follow-up: Shows member relatives in issues lists
- Remove unuseful warn
MT3747, Follow-up: Shows member relatives in issues lists
- Removes renewal in moremember.pl
MT3747, Follow-up: Shows member relatives in issues lists
- Adds sorting for circulation.pl
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previously GetAllIssues was called before authenticating. Given how expensive
GetAllIssues is, this is problematic and could be used for used for DOSing the
server. There should be no functional change from this patch.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch enables the ACCTDETAIL notices (and any branch-specific derivatives) to use
<<branches.*>> and <<borrowers.*>> tokens
This patch also attempts to send the email from the branch email first, falling back to
KohaAdminEmailAddress if no branch email exists.
To test:
1. Enable AutoEmailOpacUser system preference
2. Add <<branches.*>> tokens to the ACCTDETAIL notice
3. Create a new patron, including:
a. test email address in the field matching your AutoEmailPrimaryAddress syspref value
b. username and password (required to send a notice)
c. any other required fields to save the record
4. Check you inbox. Notice should send instantly (no need to run process_message_queue.pl)
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No searching borrowers by categorycode or branchcode will only bring up
exact matches. Before searches for Staff (S) would also bring up
Students and Schools (SC, ST). Same for branchcodes.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The fix for 3319 overwrote the @branchloop variable with output from GetBranchesLoop,
which forces a selected branch. Removing the extra call, and just measuring the size of
@branchloop as it was build, plus some dereferencing, fixes the issue.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Removing option to show 50 items/show all from script and template
- Adding parser to exclude articles in title sort (en only, see Bug 5766)
- Setting default sort to 'date due descending' as it was previously
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This fix the members-home script to work with new letter search management, and delete not anymore used code/template
(written by Nahuel Angelinetti)
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
- Hiding patron add toolbar when branches or categories are undefined
- Blocking patron entry form if branches or categories are undefined
- Removing nonfunctional template logic for displaying missing category
error message.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Incorrect checking of guarantorid was causing moremember.pl to
try and construct addresses using data from non-existent guarantors
ensure that test is consistently checking that value is defined and not
'', '0' or 0 [ i.e. what perl does for you anyway!!]
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reimplements Paul Poulain's original OPAC Privacy patch, with some minor improvements and changes to wording
If the library enables the OPACPrivacy system preference along with the opacreadinghistory preference, and sets
an AnonymousPatron (must be a valid patron number in the database), the user will see a new tab upon login to
the OPAC, My Privacy. From there, the user can:
- Set their OPAC Privacy to one of three values
0 - Forever. This keeps their reading history unless they explicitly delete it; the bulk anonymiser won't touch it
1 - Default. Keep reading history until either they delete it or the library does
2 - Never. Instantly anonymises reading history upon item return
- Instantly delete their reading history
There is a warning and a popup to confirm. I've removed Paul's extra confirm checkbox, which seemed redundant
A note of which preference the patron has selected is added to the Patorn Details page in the staff client. This is read-only.
This patch also consolidates Privacy system preferences into the Privacy section of the OPAC tab.
Thank you to BibLibre for the original implmentation of this patch, and Los Gatos Public Library for funding and
testing the reimplementation.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
I couldn't figure out how (or whether) GetBranchesLoop could be
convinced to return a list of branches without selecting one, so
I swapped GetBranchesLoop with GetBranches. This will preselect
a branch only if a branch has been submitted as part of a query.
This does NOT preselect the correct branch when IndependantBranches
is turned on.
I also added a template variable which is true if a query has
been submitted with a branch or a category so that the extra
form fields can be displayed, reminding the user that they
added limiters to their query.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the receipt template to be more readily customized
to include the library's address, phone number, email address, etc.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
There is no on-off global parameter for it since if a library does not want to
use it, then the library will not use the "slip" category in news - this is
similar to the OPAC news and Staff news categories in the news feature.
We have been using this for months in Koha 3.0 and the librarians like it and
so does PR as it gives a way to advertise events and news to patrons with every
checkout.
The files modified are:
koha-news.tmpl
moremember-receipt.tmpl
moremember.pl
Darrell Ulm
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Making duplicate patron warning dialog simpler but more explicit
- Pointing duplicate patron preview window to new brief version
of moremember.pl to display more patron details than the previous
version.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Styling error message with "dialog alert" class
- Adding sidebar patron details to match other patron pages
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a small enhancement to allow printing of Fees / Fines
receipts from the Fines page.
Patch adds print links to the Fines page next to Fines or Receipts
transactions.
Clicking on the link will pop a new window and will print that with
total outstanding as on date.
You can edit koha-tmpl/intranet-tmpl/prog/en/css/printreceiptinvoice.css
to better control printing this type of material.
18-Oct-2010 Changed template and script names to match. Corrected
invalid markup in the templates.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Rebased to current HEAD, small error fixed.
Should also apply to 3.2
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This add a verification, to allow automatic modification of expiry date, only if we are on a page that allow modification of expiry date.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Staff users now only need circulation privileges to print
checkout receipts and slips; the 'borrowers' permission, which
allows editing patron records, is no longer required.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Per the following koha-devel thread, the use of
staff user subpermissions, AKA granular permissions, is
now the default behavior in Koha. This patch removes
the GranularPermissions system preference.
[1] http://lists.koha-community.org/pipermail/koha-devel/2010-February/033670.html
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
When editing patron attributes or messaging preferences on the
patron editor, Koha would crash with the following error:
Software error:
Can't use an undefined value as an ARRAY reference at
/home/koha/kohaclone/C4/SQLHelper.pm line 186.
This would occur only when editing the specific attribute
or message preferences section, not when editing the entire
patron record.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Removed instances of 'use YAML' that were either completely
unnecessary or which were used only in debug code. Also
removed a needless import of Data::Dumper.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Obviously, Koha global pagination function could be improved. This patch
do something which belongs to this function. A CPAN module like
Data::Page could help or be an inspiration... 3.4?
There is also room for improvement in they way resultset are
constructed. The whole set is retrieved and just a subset is displayed.
It impacts performances for libraries with a great number of patrons.
The right solution would be:
- to find the resultset size with SELECT COUNT(*)
- to retrieved the exact subset with LIMIT and OFFSET SQL arguments
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
By default, the patron search was pulling results in *Descending* order,
then reordering the results on the page using javascript in *Ascending* order.
This was causing screwy results where the entire list of results of multiple
pages was not in complete alphabetical order.
Fixed by changing the SQL to pull in Ascending order.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
