Bug 9052 fixed this for prog, CCSR was left aline in the dark (it's friday).
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Worked fine in my test package, good work Tomas
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
koha-email-disable now
- Checks the instance exists.
- Checks if email is already disabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch for Bug 9250 did not add the new commands to
debian/docs/koha-common.xml, which functions as a sort of table
of contents for the real commands. This patch adds them.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Simple documentation patch
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This adds commands required to control the SIP server. These commands
are:
* koha-enable-sip - copies the SIP config to the sites directory
* koha-start-sip - starts the SIP server processes
* koha-stop-sip - stops the SIP server processes
It also calls these as appropriate from the koha-common init script.
To use:
1) sudo koha-enable-sip instancename
2) sudo vim /etc/koha/sites/instancename/SIPconfig.xml
Do whatever is needed for your site's SIP configuration
3) sudo koha-start-sip instancename
To test:
1) Build packages with this patch
2) Ensure that sudo koha-start-sip instancename doesn't do anything
3) Run sudo koha-enable-sip instancename
4) Edit /etc/koha/sites/instancename/SIPconfig.xml if needed (probably
not required for testing)
5) Run sudo koha-start-sip instancename
6) Note that the sip processes are now running
7) Run sudo koha-stop-sip instancename
8) Note that the sip processes have gone
9) Reboot your Koha server
10) Note that the sip processes are back
Sponsored-By: Waitaki District Council Libraries
Sponsored-By: South Taranaki District Council Libraries
Sponsored-By: Horowhenua District Council Libraries
Sponsored-By: Rangitikei District Council Libraries
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. koha-start-sip without a prior koha-enable-sip
does nothing. koha-enable-sip copies the SIP config file to the
instance directory. After koha-enable-sip, koha-start-sip and
koha-stop-sip works as expected. After a reboot, the SIP processes are
still running. I have not actually tested the SIP servers after they
have been started, but assume they work the same as always.
The man pages look good.
The new commands should also have been added to the man page for
koha-common. I'll do a followup for that.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Until we have solved the packaging of koha template translations, provide a command that manages the installed translations in a proper way.
To test, build a Debian package of current master+the patches from this bug :-D and try the many options running koha-translate --help provide.
The command itself can be grabbed from a git checkout with this patch applied to test the script's funcionality. If it (and its docs) fits the package building stuff, I'll test on monday when I can be back on my workstation.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Good adition. Work as described. No errors.
Copied to /usr/local/bin. No errors on install, update, remove, list and check.
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As Mason noted, there was an error on that line.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-enable now:
- checks for the existence of the instance before any other action on it.
- checks if the instance is already enabled before changing stuff in the config files.
- only reloads apache if it is needed!
- handles more than one instance name as parameter (the code was there, a check for the cardinality of the args prevented it from working).
- documents this behaviour change in the docs
- doesn't break if the provided (invalid) instance name is a prefix/suffix of a real one (added -x to the relevant grep command).
To test:
- Aplpy the patch, build your packages
- Run koha-enable on
- Non existent instance (try using a prefix or a suffix of an already created one too).
- Already enabled existent instance name.
- Disabled instance.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
As noted by Mason on bug 10101, the check was not working for zero arguments.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-disable now:
- checks for the existence of the instance before any actions on it.
- checks if the instance is already disabled before touching anything (warns otherwise)
- only reloads apache if needed
- handles more than one instance name.
- changed the docs to acknowledge the previous item.
To test:
- Apply the patch, build your package
- Run koha-disable on
- Non existent instance (try names that are prefix and suffix of a valid one too please)
- Already disabled instance name.
- Enabled instance name.
It should work as expected and warn the user on the expected wrong cases.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-start-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-restart-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit:
- changed some wording problems.
- fixed an error in parameter validation
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
VERY trivial string patch. Couldn't help sending it.
To+
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Thanks for fixing my typo! I did not test by building packages
etc, but by grepping for "Communnity". The patch removes
all occurences of the typo.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This changes the scripts so that:
- in koha-create, the zebra password and mysql passwords are set to 16 character "secure" passwords, ie generated with pwgen -s 16 1
- the patron password is set to a 12 character "memorable" password.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Looks good. I did not actually build, install and test new packages,
but i did test pwgen with the new arguments and the changes make
sense.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
QA signoff
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
And we need to add it to control.in as well, because control is
created from control.in (which is the whole point of the warning ;)
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds comments with a warning.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
* run xt/verify-debian-docbook.t and make sure it's all OK
* modify an xml file in debian/docs, try again, make sure it fails
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
- Running "prove -v xt/verify-debian-docbook.t" loops through all the
XML files in debian/docs and reports them as being ok.
- Removing a "<" from one of the files makes the test report it as
an error
- I did not verify that the test actually trips up a package build
if there is invalid XML.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
See the bug for a description of the problem.
This patch tries to restore searching for marcflavour != MARC21 as well as
allowing instances with different marcflavors to co-exist on the same server.
To test:
- Do a package install with e.g. the official squeeze-dev packages and create at
least two instances, with different marcflavours, e.g.:
sudo koha-create --create-db --marcflavor marc21 test1
sudo koha-create --create-db --marcflavor normarc test2
- Run through the web installers for both instances and add a couple of
records to each. Wait for the records to be indexed or run indexing manually
with
sudo koha-rebuild-zebra -f test1
sudo koha-rebuild-zebra -f test2
- Try searching for the records you added. It should work in test1 but not in
test2.
- Apply the patch and build packages with the build-git-snapshot script
- Install the new koha-common package
- Create two instances (because of Bug 9754 it is probably best to give the
instances different names than the ones you created above, or to do this on
a fresh VM or similar) and add records, as described above. Searching should
now work equally well for both instances.
Please note: Because of Bug 9752 you will have to set marcflavour = NORMARC
by hand before you do the searching, if you choose NORMARC as the marc flavour
on one of the instances you create.
Please note too: I am not confident that this is the perfect solution, so
merciless and thorough testing is necessary! ;-)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works for me for GRS-1 (package installation out of the box). Could not figure out how to set up DOM indexing and eventually stopped caring about it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Build packages with the patch and checked that creating
instances and search within them works for both MARC21 and NORMARC.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The previous patches were missing the koha-conf.xml updates. This patch
updates koha-conf.xml and makes the changes neccessary to include the
QueryParser configuration file in the packages.
To test:
1) Run Makefile and check generated koha-conf.xml to confirm that the
line <queryparser_config>...</queryparser_config> is there with an
absolute path.
2) That was it.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested update successfully - new line now shows up and
query parser is used.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
Build a package from a git checkout with this patch included
once installed, run man koha-common - koha-shell should appear near the bottom.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Update the dependencies to match master
* Blacklist the CHI and Data::Pagination
* Perltidyed the list-deps script
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Found because cron.daily/koha output contains the error "[: 97: missing ]"
To test:
1. run koha-run-backups --days 2 --output /var/spool/koha
2. should see no output
Sponsored-by: Library of the Józef Piłsudski Institute of America
Signed-off-by: Vitor FERNANDES <vfernandes@keep.pt>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I still get an error:
./koha-run-backups: 58: ./koha-run-backups: koha-list: not found
But this patch fixes the syntax error
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This command behaves something like su(1), but provides you with a shell
as the koha user, and with the environment pointing to the right places.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This uses libjs-yui to provide the skin.css and reset-fonts-grids.css
files from YUI. It patches the CSS files to point to the right location
for the files.
To test:
* Build a package with this patch included
* Install it
* Look at the OPAC and note that things no longer look terrible, and
that there are no 404's coming from bad CSS URLs.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
I created a package of 3.10+9052, installed and tested.
I confirm that the OPAC does not look broken anymore
and I could not find 404 errors with Firebug.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I also created a package of 3.10+9052 and removed libchi-* from the
debian/control file. The OPAC shows no problems using those packages,
layout, pictures and colors seem to all be in place.
Also the OPAC on master with patch applied still works as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Koha::SearchEngine requires moose, but it wasn't declared as a
dependency.
Also update the debian/control dependencies to match the current state
of the requirements.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
1. Create a page for koha-run-backups
2. Fix the synopsis for koha-foreach
3. Add koha-create and koha-run-backups to koha-common
To test
- Convert the changed xml files to man pages with
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl koha-x.xml
- View generated pages with e.g.
$ man -l koha-x.8"
(Replace x with the names of the changed files)
- Check that the changes make sense
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. I was able to produce the 3 man files, load them with man
command, and see the added information properly formated.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Remove them using debian/rules when building .deb packages until
we figure out what to do with them in a .deb install.
To do this I ran the build script like this:
sudo DEB_BUILD_OPTIONS=nocheck ./debian/build-git-snapshot -distribution precise -D precise -r ~/ubuntu -v 3.9.0-046~git -d
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
After the changes to YUI path the build process is broken. For testing this I had
to set the build process to ommit the tests as there are some db_dependent test being
called (which failed).
To do this I ran the build script like this:
sudo DEB_BUILD_OPTIONS=nocheck ./debian/build-git-snapshot -distribution precise -D precise -r ~/ubuntu -v 3.9.0-046~git -d
Note: Even when this is fixed, there are still issues with some files missing
dh_install: etc/koha/searchengine/solr/config.yaml exists in debian/tmp but is not installed to anywhere
dh_install: etc/koha/searchengine/solr/indexes.yaml exists in debian/tmp but is not installed to anywhere
dh_install: etc/koha/solr/indexes.yaml exists in debian/tmp but is not installed to anywhere
dh_install: missing files, aborting
make: *** [binary] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Please note that debian/rules *must* use tabs. If you have a git hook
that automatically replaces tabs with spaces, please undo those changes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
this patch fixes a glitchy symlink to tiny_mce
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Note that you have to *remove* koha-common then install fresh in order
to recreate the symlink.
VERY IMPORTANT!!! debian/rules MUST USE TABS. USE -n WHEN COMMITING
THIS PATCH, AND DO NOT REPLACE TABS WITH SPACES.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The newer version of MySQL in Ubuntu 12.04 installs a default
'localhost' user with no username. Due to the way that MySQL looks up
user details when you connect, if you connect from localhost and the
user was only created with a wildcard host (%), the anonymous localhost
user will be found instead. This means that your username is lost for
the connection, and you have no privileges.
This patch creates a second user with a hostname of 'localhost'. This
will not work if your database is on a remote server, but you probably
know what you are doing if that's the case. Patches to determine this
server's name relative to the MySQL server are welcome (or even ideas on
how to do it.)
It also fixes up a couple of other small things:
* make koha-remove stop zebra properly
* stop the warning that the password file is missing on create
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as promised.
Fixes the following things:
1. Sanitizes log output to prevent an attacker from using a specially
crafted POST to add extra lines to the log
2. Simplify a regular expression since "..file" cannot be used to
escape the current directory
3. Makes sure directories are consistent
4. Correct logic issues in misc/cronjobs/backup.sh
Thanks to Frere Sebastien Marie for catching these issues.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch builds on work by Lars Wirzenius for the Koha packages.
To date, the only way for a Koha librarian to obtain a complete backup
of their system has been to log into the system via SSH (or FTP) to
download the mysqldump file. This patch makes it possible for
superlibrarians in properly configured systems to download night backups
via the staff client's Export tool.
Recognizing that this is functionality with potentially very grave
security implications, system administrators must manually enable these
features in the koha-conf.xml configuration file.
The following configuration settings have been added to the koha-conf.xml
file:
* backupdir => directory where backups should be stored.
* backup_db_via_tools => whether to allow superlibrarians to download
database backups via the Export tool. The default is disabled, and
there is no way -- by design -- to enable this option without manually
editing koha-conf.xml.
* backup_conf_via_tools => whether to allow superlibrarians to download
configuration backups via the Export tool (this may be applicable to
packages only). The default is disabled, and there is no way -- by
design -- to enable this option without manually editing koha-conf.xml.
This commit modifies the following scripts to make use of the new
backupdir configuration option:
* koha-dump and koha-run-backups in the Debian packages
* The sample backup script misc/cronjobs/backup.sh
Note that for security reasons, superlibrarians will not be allowed
to download files that are not owned by the web server's effective user.
This imposes a de facto dependency on ITK (for Apache) or running the
web server as the Koha user (as is done with Plack).
To test:
1. Apply patch.
2. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
3. Add <backupdir>$KOHADEV/var/spool</backup> to the <config> section
of your koha-conf.xml (note that you will need to adjust that so that
it is pointing at a logical directory).
4. Create the aforementioned directory.
5. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
6. Add <backup_db_via_tools>1</backup_db_via_tools> to the <config>
section of your koha-conf.xml
7. Go to the export page as a superlibrarian. Notice the new tab.
8. Go to the export page as a non-superlibrarian. Notice there is no
new tab.
9. Run: mysqldump -u koha -p koha | gzip > $BACKUPDIR/backup.sql.gz
(substituting appropriate user, password, and database name)
10. Go to the export page as a superlibrarian, and look at the "Export
database" tab. If you are running the web server as your Koha user,
and ran the above command as your Koha user, you should now see the
file listed as an option for download.
11. If you *did* see the file listed, change the ownership to something
else: sudo chown root:root $BACKUPDIR/backup.sql.gz
11a. Confirm that you no longer see the file listed when you look at the
"Export database" tab.
12. Change the ownership on the file to your web server (or Koha) user:
sudo chown www-data:www-data backup.sql.gz
13. Go to the export page as a superlibrarian, and look at the "Export
database" tab. You should now see backup.sql.gz listed.
14. Choose to download backup.sql.gz
15. Confirm that the downloaded file is what you were expecting.
If you are interested, you can repeat the above steps but replace
<backup_db_via_tools> with <backup_conf_via_tools>, and instead of
creating an sql file, create a tar file.
To test packaging: run koha-dump, confirm that it still creates a
usable backup.
------
This signoff contains two changes:
10-1. If no backup/conf files were present, then the message telling you
so doesn't appear and the download button does. Made them behave
correctly.
10-2. The test for a file existing required it to be owned by the
webserver UID. This change makes it so it only has to be readable.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This allows modules that aren't in the main debian repos to be handled
by the list-deps script when building a control file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch adds t/db_dependent/00-strict.pl which tests that all Perl
scripts compile. I chose to use Test::Strict so that in the future we
can also have the test check that "use strict" and "use warnings" are
enabled.
To test:
1. Run t/db_dependent/00-strict.pl.
2. Run around waving your arms in the air that we have a couple of
scripts that don't compile.
3. Actually, that's about it. You could test my patch for bug 8384 next.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Moved test to t/db_dependent
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Patch introduces a new module Text::Unaccent.
To test:
1) Add a new patron with diacritics in surname and first name, leave userid empty.
2) Save user and check the created userid has only the base characters and
diacritics have been removed correctly.
3) Create another user with the same surname and first name, check userid
is generated correctly.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes bugs 6684 6997 4880:
6684 koha-remove should check the number of arguments it gets
6997 koha-remove leaves system in inconsistent state if there is an error
4880 koha-remove sometimes fails because user is logged in
Amended by chrisc@catalyst.net.nz
Trying to resolve conflicts.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on top of bug 7924.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Minor change in the koha packages : that is having perldeps and third party softwares installable as stand alone packages
in other words, create meta-packages to simplify installation of koha.
2 packages was created : koha-deps and koha-perldeps which install general dependencies of koha.
I modified the file control.in and executed the update-control script to generate the file control. Whith the control file,
I launched the build-git-snapshot script (see http://wiki.koha-community.org/wiki/Building_Debian_Packages_-_The_Easy_Way)
to generate packages.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
I've removed the 'Version' and 'Maintainer' lines, as they don't belong
in package sections. They apply to the source declaration only.
Otherwise, it seems fine and useful.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
koha-remove would fail with a message like this:
Removing Koha instance --
ERROR 1396 (HY000) at line 1: Operation DROP USER failed for 'koha_--'@'%'
After fixing this, the --keep-mysql option made the script exit without doing
anything.
To test:
Alt 1
- Build package with build-git-snapshot
- Install package
Alt 2
- Replicate the changes in the patch in an existing installation
Then:
- Add instance1 and instance2
- koha-remove instance1
-- Check that script completes and the databse is gone
- koha-remove --keep-mysql instance2
-- Check that the script completes but the database is not removed
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Line 121 had "/etc/koha/koha-site.conf" instead of "/etc/koha/koha-sites.conf"
To test:
I don't think this needs any actual testing, just read the patch and check
that it looks sensible...
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This adds some dependencies to the control file that are required.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The apache accesslogs suggested by the default config files are called
*_log, which results in them not getting picked up by logrotate, which
looks for *.log. This patch changes the suggested filenames to *.log.
To test:
Not much to test here, just apply the patch and check that all
occurences of TransferLog and CustomLog are now on the form *.log
All the lines where these occur are commented out, so this will
not actually change any behaviour.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This removes the dependency on Date::ICal (which is largely
unmaintained) and replaces it with DateTime::Format::ICal which can do
the same job. It also updates all the docs and installation scripts to
handle this change.
Note that this causes a minor behaviour change: previously the generated
times were converted to UTC, now they are left "floating" (that is, have
no timezone attached) and so will appear as the local time when imported
into a calendar. I don't anticipate this'll cause any issues however.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This moves the SIP config to the templates directory (on package
building) in anticipation of making it configurable with package tools.
Prevents it being installed into /etc.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This commit makes koha-create more flexible by adding a number of command-line
and configuration options.
The biggest change is to add support for pre-determined MySQL credentials using
a file in /etc/koha/passwd (for security reasons, if you use this feature, make
sure the file is not world-readable). The configuration file has the following
format:
instance:user:password:database
The database is optional, but the other two are both required if you want to
specify MySQL credentials. If no credentials are specified for a given instance,
the standard koha_instance username and an auto-generated password are used.
The following additional command line options are now available:
* --use-db - use a pre-existing database, see also --database
* --database - specify the name of the mysql database (still defaults to
koha_instance)
* --passwdfile - specify a custom (Koha) passwd file for MySQL credentials
The following additional variables are now available (for use in
koha-sites.conf or a custom config file):
* OPACPORT (previously added but not documented) - port on which the OPAC
should be served
* OPACPREFIX - prefix for the OPAC's virtual host
* OPACSUFFIX - suffix for the OPAC's virtual host
This commit also adds the --keep-mysql option to koha-remove, which, if
specified, will prevent koha-remove from deleting the database or MySQL user
when removing an instance.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This does two things:
* Allows OPACPORT to be specified to change the default OPAC port,
* removes the port number from the ServerName directive, as it's already
handled by the VirtualHost declaration.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I don't speak spanish, so my signoff is just a technical view of the patch
Now it more closely matches the one that's distributed in /etc
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
(not tested. I confirm the code is clean, and tests are not broken)
Prior to this patch, the koha-restore Debian script did not set the home
directory properly for the system users it created, causing problems down the
line for koha-rebuild-zebra. This patch fixes that by specifying the home
directory.
http://bugs.koha-community.org/show_bug.cgi?id=7216
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Sometimes zebra needs a tmp dir in order to work. This ensures that it
is created both by koha-create-dirs in the packages, and by
rebuild_zebra when it runs.
--
tested ok, signing off
Signed-off-by: Mason James <mtj@kohaaloha.com>
If you accidentally delete one of the files that koha-remove is supposed to
remove, when koha-remove reaches that point in the script, it will die, leaving
later removal steps undone. This patch fixes the problem by checking for the
existence of each file prior to deleting it, so that short of an actual problem
with removing the file, the script can continue. Note that the fix for bug 6929
is also needed to prevent any problems with stopping Zebra from killing
koha-remove.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
This brings all the changelog entries for releases up to what has been
included in the packages
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This updates the default version number that packages are build with to
be 3.7. This should be applied to master only.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Add DocBook manual pages for commands that do not have a manual page yet. Also
add a page for koha-common itself, listing all the available commands.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Minor change: I fixed a typo I spotted
Currently, if it attempts to stop a zebra process that doesn't exist,
the script will abort, which leaves things running. This patch prevents
it from aborting.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Also fix the example so that it is there.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This uses the docbook source files to generate the man pages, and
installs them to their correct location when the packages are being
built.
This will make it easier for people to write man pages, thereby ensuring
that people join in keeping documentation up to date.
Note: adds docbook-xsl and xsltproc to the dependencies.
Note2: applies on top of Magnus' other patch on this ticket.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch
- deletes debian/scripts/koha-create.8
- adds debian/docs/koha-create.xml and koha-remove.xml
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This affects only koha package installations that have multiple
instances running. After this patch, it's worth running the upgrade
again to ensure that everything happened correctly the first time.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The revised patch quotes the variable $mysqldb, as suggested by Frère
Sébastien Marie.
This patch makes sure that pointing DEFAULTSQL in /etc/koha/koha-sites.conf
to any (gzip'ed) file produced by mysqldump works, by adding the name of the
database to the end of the call to mysql, when the specified SQL file is
loaded. Files produced with koha-dump-defaults should still work too.
To test:
- Apply the patch
- Create a new package with build-git-snapshot
- Install the package
- Create an SQL file from an existing installation with mysqldump
- gzip the SQL file
- point DEFAULTSQL to the file in /etc/koha/koha-sites.conf
- create a new site with koha-create --create-db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
(to be followed by another patch that I think helps too)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sets the default borrowernumber of staff user to 1 and makes it possible
to override this with ADMINUSER in /etc/koha/koha-sites.conf or with the
--adminuser and -a command line options.
Remember to update the wiki if this gets pushed!
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the build information to not be suppressed when using
build-git-snapshot. This makes seeing where problems are substantially
easier.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
koha-create would fail to check that --configfile was set on the
commandline, before either including it if it existed or dying if
it did not. This patch should make sure the existence of a
configfile is only tested if --config is set.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
This should apply against 3.4 and master.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This lets you get into the mysql session for this library instance
really easily. Probably most useful for developers.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This allows the database details (username and database name in
particular) to be modified in between a koha-create --request-db and
--populate-db. Most useful when you discover that the username is too
long or something. Now, when populating the database, the connection
information is reloaded from the koha-conf.xml rather than being
generated from the instance name.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This causes backups for the last two days to be stored by default. The
backups will go into /var/spool/koha.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Order of precedence for config options, from lowest to highest:
1. The defaults set in koha-create itself
2. /etc/koha/koha-sites.conf
3. Config file specified with --configfile
4. Individual options set with --marcflavor, --zebralang, --defaultsql
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will override the setting in /etc/koha/koha-sites.conf.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds the --marcflavor and --zebralang commandline options, as
well as short versions of all options.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
As systems (Ubuntu already, Debian testing is doing it too) move to
ramdisking /var/run and /var/lock, or otherwise clearing them on boot,
we need to ensure that they're there when we need them. This patch
autocreates any directories that are missing when the init script runs.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This commit does the following:
* Merge the changelog from the releases of 3.2
* Adds a command 'koha-upgrade-to-3.4' that does the MARC item splitting
stuff.
* Adds a debconf note to make sure people know that they need to run
the above command.
* Fixes the inclusion of jQuery in the packages.
* Makes build-git-snapshot build packages with a 3.5 version.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This keeps the package versions of the zebra configuration in sync with
the makefile-installed ones.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds the required changelog changes to keep it current for the
3.2.1 release. It is intended to go straight into 3.2.x, and probably
should go into master also.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
By default the packages now set up the cron jobs to handle things like
overdues and email etc. By default, email is off, 'koha-email-enable'
and 'koha-email-disable' can manage this.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This prevents it leaving files lying around in /tmp
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
RM note: we've had our fun; next patch will be to trim
the comment to something that makes sense in context.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
perl-base is a required package, so it is always installed on a Debian
system, and Debian packages should not depend on it, unless they need
it a specific version, and I don't think we do.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This way, the various cron jobs will not try to do things to it.
They can't, since it is not yet really created.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
If the new version of Koha requires a newer version of the database
schema, the Koha instances will work immediately after the package
is upgraded, rather than after the sysadmin has run koha-upgrade-schema
manually.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The canonical list of Perl module dependencies are in
C4::Installer::PerlDependencies::PERL_DEPS now. Add a script
(debian/list-deps) to turn that into a list of Debian package names.
Because that is a slow process, and the output rarely changes, do
not do that at build time. Also, doing it at build time would require
modifying debian/control in evil ways.
Instead, add another tool, debian/update-control, which reads the
new file debian/control.in, and adds the output of debian/list-deps to
Build-Depends and creates a new debian/control.
debian/control.in is the master file. If changes are needed, that should
be edited. For performance and convenience reasons, the output is also kept
in git, but don't edit debian/control directly, please. Such changes
might get lost by the next commit by someone else.
Whenever PERL_DEPS changes, debian/update-control should be run as well
and the result committed to git.
This is not quite as automatic as it might be, but should be good enough.
It avoids keeping the list of Perl modules in two places.
Note that since it seems impossible to automatically figure out the Debian
package version that corresponds to a Perl module version, I have not
tried to do that at all.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Since we're uploading a git snapshot, this is not meant for
production, and thus it should not be uploaded to squeeze,
but for squeeze-dev.
Documentation for the pockets will appear in the apt
repository or the wiki once it is ready.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
One bug fix (three steps, not two, are automated in koha-post-install-setup).
Also add a note about the need to possibly edit ports.conf.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The way things are set up, each Koha instance runs under its own
user account. At least for now, this requires apache2-mpm-itk.
Later we can investigate other possibilities.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This is necessary if we do not have access to DB server with sufficient
permissions. The DB server is used for other things, that may well be
the case.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
koha-common.postinst now creates a symlink to the Debian one.
The sysadmin may replace that manually with something that allows
Koha to access a remote mysql server.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The dependencies are needed both at build time and at run time. Build
time needs them for running tests. To avoid duplicating the (long!)
list of dependencies, we do a little bit of trickery, and generate
a koha:Depends substvar, from all build dependencies (except debhelper),
and use ${koha:Depends} in the koha-common (not koha) Depends header.
A little bit tricky, but works.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
koha-common will be suitable for hosts with multiple Koha instances,
or those that otherwise need to do thing differently from the main
koha package.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Also fix paths, since we can't install them where Koha expects them,
since that location is used by the Debian packaged yui.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
