The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On receiving orders, the librarian has to filter again the pending
orders list.
This patch stores the filters in a cookie in order to apply them when
the librarian finish a receive and come back on the pending orders list.
Test plan:
1/ choose a vendor with several baskets and orders.
2/ start to receive an item.
3/ on the pending orders page, add some relevant filters.
4/ receive an item.
5/ you are back on the pending orders page and filters are directly
applied.
Signed-off-by: Nicolas Bravais <nicolas.bravais@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested with receiving and cancelling the receive process the
filters are kept.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In basketgroup.pl, some code is supposed to be executed if
$op = "validate". But this value is no longer assigned to
the $op variable since 2009.
This patch suppressed dead code, along with parseinputbaskets
and parseinputbasketgroups subs, which are obsolete.
No functional changes expected
Regression test :
* Check basketgroup are shown as before the patch, and can be closed
and reopened.
* Check you can add or remove a basket from a basketgroup, and change
information about it (like delivery place)
* Check you can create a basketgroup when you close a basket.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The following commands return nothing:
- grep validate acqui/basketgroup.tt
- grep -R basketgroup.pl -C 2 | grep validate
- git grep parseinputbaskets
- git grep parseinputbasketgroups
- git grep basketgroup.pl | grep validate
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Weird behavior:
When an import is undone into catalog, the status is set to "reverted".
But if you open the add orders from iso2709, the status is automatically
set to "imported" and does not appear in the list.
So it is not possible to import a reverted batch.
[RM note: since a reverted batch is nonetheless a staged batch, and
could be reused, allowing orders to be placed by taking bibs
from a reverted batch is not as odd as it might sound. It *can* look
odd for a staged or reverted batch to contain records that are
imported, but that's a long-standing oddity.]
Test plan:
- verify you reproduce the weird behavior
- apply this patch
- import a file and the batch into the catalog
- verify (in the your mysql/MariaDB cli) the status is "imported"
- verify it does not appears in the add orders from iso2809 page
- undo the import
- verify (in the your mysql/MariaDB cli) the status is "reverted"
- verify it appears in the add orders from iso2809 page and the status
is always "reverted"
- finish the order
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed:
$total .= $bookseller->{invoiceprice} // 0;
Into:
$total .= " " . ($bookseller->{invoiceprice} // 0);
in order to add a space between the total and currency in
the basket group.
Revised test plan:
1) Log into staff client
2) Acquisitions
3) Click 'Search' in the 'Manage orders' box.
4) Click '+ New basket' beside a vendor name.
5) Type 'Bug 9654 Test 1' into basket name.
6) Click 'Save'
7) Click 'Add to basket'
8) Click 'From an external source'
9) Type 'Green Eggs and Ham' into the Title text box.
10) Click 'Search'
11) Click 'Order' on any one of the results.
12) Click 'Add Item' in the 'Item' box.
13) Select a Fund from the dropdown in the
'Accounting details' box.
14) Click 'Save'
15) Click 'Close this basket'
16) Click 'Yes, close (Y)' without checking the attach to a
basket group.
17) Click the 'Basket groups' tab.
18) Click '+ New basket group'
19) Notice the listing in 'Ungrouped baskets' lacks a space
between the number and the currency. (e.g. Total: 0USD)
20) Apply patch (git bz apply 9654)
21) Refresh the page
22) Notice there is now a space. (e.g. Total: 0 USD)
23) Run the Koha QA Tool: (~/qa-test-tools/koha-qa.pl -v 2 -c 1)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Problem summary: when doing partial receives for the given order -
1) if AcqCreateItem is set to 'ordering', various item data (price,
dateaccessioned, replacementprice, replacementpricedate) are getting
erroneously updated on the wrong (yet to be received == not the ones
being currently received) item records
2) if AcqCreateItem is set to 'receiving', newly received
item records are being created without the aforementioned fields
set to the proper values
This (trivial) patch should deal with both cases, hopefully without
breaking enything else.
To test:
- apply the patch,
- create some orders with 2+ quantity
- test partial & non-partial receives for those orders
- ensure the received item records are getting modified
(for AcqCreateItem set to 'ordering') and/or created (for AcqCreateItem
set to 'receiving') correctly for both partial and non-partial receives
- receiving orders with quantity = 1 / receiving orders in non-partial
mode should be still working fine for 1) & 2) scenarios (i.e.,
AcqCreateItem set to 'ordering' / AcqCreateItem set to 'receiving')
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Works as I'd expect now! Awesome patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also: t/db_dependent/Acquisition/
t/db_dependent/Acquisition.t
Created 2 orders with 3 items each for both settings
of AcqCreateItem (on receive, on order) with the patches
applied. No regressions found.
Closed baskets and received shipments for each, with
AcqCreateItem set according to how the order was created.
First recreated the problem without the patches, reloaded
database and confirmed that the patch fixes it.
No problems found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch make possible to view an individual closed basket group
without reopening it.
- It adds a new "View" button on closed basket group list
- It creates a view for closed basket groups, with 3 buttons (reopen,
print, export)
- It adds a "delete" button on standard "edit" view (for open
basket groups)
To test :
1/ regression test :
- create some empty basket groups
- create some basket groups by closing baskets
- in the list of basket groups closed and opened, check you can use
the buttons that existed before the patch (close and print, delete,
export, print, reopen)
- click on "Edit" to edit a opened basket group : check everything is
like before :
-- change the billing and delivery places,
-- add a note,
-- put some new baskets in the bg,
-- remove baskets from it
-- save it without checking "close" box => it should be saved but kept
open
-- edit it again, and make other some changes (define a freetext
delivery place for example)
-- save it with checking "close" => it should be saved but closed
2/ new feature test
- click on "view" button on top right column of some closed basket group
- check all the displayed informations are correct (places, free place,
note, list of baskets)
- check you can not change anything
- click on "print" button => check a pdf is created
- click on "export" button => check a csv is created
- click on "reopen" button => you should stay on the same basket group, but
it is now open and you can make some changes
- go back to the basket group list of the vendor. Check the reopened bg
is in "open" tab
- click on "edit"
- click on new "delete" button => the bg should be deleted, and you are
redirected to the bg list of the vendor.
Signed-off-by: cedric.vita@dracenie.com <cedric.vita@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, t and xt. Works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under Plack/mod_perl wrapping, sub update_item() will become a closure,
so after the 1st run it will retain its own private instances of the
following variables: $booksellerid, $datereceived, $unitprice, $rrp,
$biblionumber.
I.e., in case update_item() gets invoked 2nd+ time (inside
the same process, but for different-subsequent receives) it may
incorrectly flag the (old, wrong) biblionumber for Zebra reindexing,
and erronously modify the current item[s] with the previously
used (wrong) values.
This simple patch should make acqui/finishreceive.pl Plack-compatible.
Test plan:
Test patched acqui/finishreceive.pl script (create and receive some
orders w/ items, etc.). Ensure items are gettting added and/or modified
correctly during receiving process.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised, no regressions found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup add some warnings after deletion if some items were not
deleted.
4 types of messages are possible :
- x item(s) attached.
- x subscription(s) attached.
- x order(s) attached.
- Unknown error.
To test :
test a
1. create a basket with
- an order using a record A which has already an item, which is used in
a subscription, and in other order (in an other basket)
- an order using a record B used nowhere elese
2. click on "Delete basket"
3. choose button "Delete basket, orders and records"
4. you should see a page anouncing basket deletion, and that record A was
not deleted because of its item, subscription and order.
5. check the link around the title of record B takes you to the record
6. check the link under the warning box ("Click here to go back to
booksellers page") takes you to booksellers page
5. check record B is deleted
test b
1. suppress the subscription linked with record A
2. create an other basket using record A
3. delete the basket on the same way as for test a
4. you should see a page anouncing basket deletion, and that record A was
not deleted because of its item and order
test c
1. suppress the item attached under record A
2. create an other basket using record A
3. delete the basket on the same way as for test a
4. you should see a page anouncing basket deletion, and that record A
was not deleted because of its orderBug 7791 Followup: add warning
after deletion if some records were not deleted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch
- delete warns
- add a missing }
- add a condition in template of avoiding asking to delete orders or
records if the basket is empty
To test :
1. Make the same tests as defined in test plan of main patch. It should
behave the same way
2. Try to delete a basket with no records inside. You will only have a
"Delete basket" button, with fewer warnings
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, when a basket is deleted, all the orders are deleted (there
is a foreign key in aqorders table on basketno).
This could be dangerous, and there is no warning.
After the deletion, unused biblios are left in the catalogue.
This patch
- adds a more detailed message describing the consequences of deletion
- give the choice of also deleting biblio records if possible
To test :
Test A :
1. create a basket with 4 orders:
- an order from a new record A
- an order from a record B which has already an item
- an order from a record C used in a subscription
- an order from a record D used in an other order
2. note the biblionumbers of the records used (or open them in other
tabs in your browser)
3. click on "Delete basket"
4. choose button "Delete basket and orders"
5. check the catalogue : records A,B,C,D should still be there
Test B:
1. create a basket with 4 orders:
- an order from a new record A
- an order from a record B which has already an item
- an order from a record C used in a subscription
- an order from a record D used in an other order
2. note the biblionumbers of the records used (or open them in other
tabs in your browser)
3. click on "Delete basket"
4. choose button "Delete basket, orders and records"
5. check the catalogue : records B,C,D should still be there. Record A
should be deleted
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the sorting of staged import batches by date,
particularly when the dateformat system preference is set to anything
other than YYYY-MM-DD.
Adds title-string sorting type to enable this.
To test:
[1] Ensure that there are at least three staged
bib import batches, with upload timestamps such that
date sorting errors would be apparent.
[2] Set the dateformat system preference to either DD/MM/YYYY
or MM/DD/YYYY.
[3] Create a new basket in acquisitions, then chose to add
a new order line from a staged record batch.
[4] In the list of batches, click on the 'staged' column
heading to sort by date.
[5] Observe that dates are sorted in alphanumeric order, not date
order.
[6] Apply the patch and refresh. This time, dates should sort
correctly.
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Search supplier and verify the basket group column is filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If items are created when ordering, this patch allows to add a value for
some items subfields.
Test plan:
Define status for items.notforloan (mapping 995$o in unimarc), for
example 4:On order, 5:On treatment
Set the Syspref AcqCreateItem on "ordering".
ACQ framework : set default value = 4 for 995$o (in unimarc)
Syspref AcqItemSetSubfieldsWhenReceived : set "o=5|b='foo bar'"
When ordering the item, default status will be 4 ; when receiving the
item, status will be changed from 4 to 5. The subfield b have to contain
'foo bar'
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- use Modern::Perl;
- GPL version
- tabs
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Testing notes:
- CSV header row is now translatable.
Tested by updating the German po files and checking for the line.
- Tested that claiming for late serial issues still works as
expected, as one file has been renamed. Filed 10931 for
untranslatable CSV contents.
- Tested that claiming late orders still works:
* Table searching and sorting
Works nicely, but some columns could be split up for better
searching and sorting:
* Order date: 20/01/2013 (245 days)
* Total cost: 10.00x1 = 10.00 Books
=> item type should be separate
* Basket: 10 MPL
=> Library and basket number could be separate columns
* Filters
* Combined various filters, search results look correct.
* Selecting order for claiming
* Limiting by vendor makes it possible to check/uncheck all
* With no vendor limit, entries for other vendors will be
locked after the first checkbox is checked for one vendor
* Exporting as CSV
* Exported single line > CSV appears correct.
* Exporting multiple lines > CSV appears correct.
PROBLEM: Translated CSV don't work correctly, as line
breaks are lost in the translation process.
Needs to be fixed in a follow-up.
* Sending serial claim email
* No regressions found - there are some problems with the
email contents noted on bug 7298.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Using a template file, the CSV headers become translatable.
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixes a few capitalization errors on the late orders page like
- Claim orders
- filter
- Search results
Also moves the supplierid from the order date column to the
vendor column.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to export late orders as CSV.
Test plan:
- Go on the late orders page (acqui/lateorders.pl)
- Select one or more order and click on the button "Export as CSV".
- The generated file should contains some information on the orders
(order date, estimated delivery date, vendor name, information field,
cost, basket name (and basketid), claims count and the claimed date)
The last line of the file is the total of orders.
- You are not allow to select order from different vendor.
- The check/uncheck all links appears only if a vendor is selected.
- Check that the check/uncheck works for all pages of the table.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing comments on last patch in this series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The first patch does a left join on aqorders_items which returns too
much order lines.
This patch follows the Galen's suggestion: it removes the join and calls
the GetItemnumbersFromOrder routine for retrieving itemnumbers.
Bonus: the "parcelitems" variable is badly named and obfuscates the code.
I changed it for "orders".
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a column to indicate holds on received items, as well as adding
a new column for fund and showing the subtotals per fund above
the total subtotal.
To test:
[1] Create an order basket containing at least one title and
ensure that an item is created for that title. Close the
basket.
[2] Place a hold on the title.
[3] Receive the order. After receiving it, but before finishing
the invoice, the table of already received orders should now
have columns for the order budget and number of holds on the
title as well as lines with the subtotal per fund.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
2 DB fields are not used: aqbudgets.encumb and aqbudgets.expend.
This patch uses these fields in order to show a warning message if the
budget selected for an order has exceeded.
Test plan:
- Create a new active fund with at least 1 of both warning fields
('Warning at (%)' and 'Warning at (amount)').
- Create a new order for a basket with this new fund and a cost >
warning amount defined for the fund (or using %).
- Save and check that a warning message appears
- Retry playing with all combinations of warning fields
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Since the parcel.pl script get *all* pending orders, there is no reason
not to display all of them.
Like that, DataTable manages pagination and sorting correctly (on all
data).
This patch adds filters on the table header (using columnFilter).
Test plan:
Try filters on the left of the screen and filters on the table header.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Searching and sorting the table works correctly.
Larger result sets are a performance problem on this page,
I have filed bug 10595 for that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After receiving an order basket, before finishing receiving the shipment,
one has an option to cancel the receipt. This patch fixes a bug where
a basket whose receipt was just cancelled displays on both the pending orders
and already received tabs.
This patch also fixes a minor unitialized variable warning.
To test:
[1] Create a basket with at least one order and close it.
[2] Receive the order, then on the row in the 'Already received'
table, click the cancel receipt link.
[3] In the page that displays, the basket just cancelled displays
on both tables. Clicking the cancel receipt link again results
in an error message.
[4] Apply the patch.
[5] Repeat steps 1 and 2. This time, the cancelled basket displays
only in the pending orders table, as expected.
[6] Verify that after applying the patch, the following no longer
is logged in the Apache error log:
parcel.pl: Use of uninitialized value in string eq at acqui/parcel.pl line...
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes test plan, all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- add a message if the search returns no result
- keep selected values if the search returns no result (for fund and
order status)
- remove plurals in order status
- move the order status column in the search results table
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
New tests also pass:
t/db_dependent/Acquisition/close_reopen_basket.t
1) Database update - I end up with too many partials. My test cases:
- New orders, basket still open
OK Expected: new, Result: partial
- Ordered orders, basket and basketgroup closed
OK Expected: ordered, Result: partial
- Partially received orders
OK Expected: partial/complete, Result: partial/complete
- Received orders
OK: Expected: complete, Result: complete
- Cancelled orders
* cancelled from open basket before order
OK: Expected: cancelled, Result: cancelled
* cancelled from closed basket before receive
OK: Expected: cancelled, Result: cancelled
All aqorders where updated with the correct status.
I have saved my 'pre-updatedatabase' and can repeat the test anytime you have a follow up.
2) Testing search functionality
a) Order search - result list
Order search shows a new column, I think it would be a bit better if the
status there was singular instead of plural - new order, partially received
order etc. - maybe we could even leave out the 'order'? (minor)
The column seems a bit lost in the middle, not sure where it would make more
sense (just saying)
b) Order search - advanced search form
The advanced search form now shows a new filter: Order status
All new status can be searched.
- an "empty" search will find all but cancelled orders
- searching for cancelled orders works correctly and shows results
Search works correctly, no regressions found.
If no result is found a message is shown.
All search input is kept, so you can modify your search terms easily.
3) Testing setting of status after applying the patch
a) Create a new order with 2 items - status is new. OK
b) Close the basket - status is ordered. OK
c) Receive both items - status is completed. OK
d) Undo receipt - status is ordered. OK
e) Receive only 1 item - order is split up into 2 orders:
- status is partial OK
- status is completed OK
f) Undo receipt of received item - order is combined into 1 again
- status is ordered OK!
g) Receive only 1 item again - status ordered/partial.
h) Delete order.
- status is completed
- status is cancelled
OK!
i) Undo receipt of 1 item again.
Refresh page.
This results in the following behaviour, that has been reported as
bug 10984. After refreshing the page follow message is shown:
Cannot cancel receipt. Possible reasons :
- The order line you trying to cancel was created from a partial
receipt of another order line which is already received.
Try to cancel this one first and retry.
- The order line you trying to cancel was created from a partial
receipt of another order line which has been deleted.
Cancellation is not possible.
BUT: The receipt is undone, but you are left with a
line with 2 items, a cancellation date and the status ordered.
Because of the cancellation date the order is not visible in pending orders.
The status is correct - so I feel this should not stop this patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You can now search orders by
- order status
- fund
The patch series also adds a new field, aqorders.orderstatus, which can
contain following values:
new
ordered
partial (for partially received orders)
complete
cancelled
To test: Search and check if results are consistent in histsearch.pl
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Note: status are no longer numeric, but strings now.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I have heard from several libraries that at the end of the budget
year even though a budget is inactive for new acquisitions, an
inactive budget should remain modifiable until the books are
closed and the budget is marked inactive. This patch makes it so
that all budgets that are unlocked are available on the order
receipt page (only).
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Right now there is no way to change the budget or fund when receiving an
item, which is annoying, particularly at the end of the fiscal year when
every item not already received has to be switched to the following
year's budget. This patch adds the ability to change the budget and fund
when receiving.
To test:
1) Apply patch.
2) Create an order for a vendor, choosing a fund to use for that order.
3) Receive the order, leaving the fund unchanged. Make sure the fund
did not change.
4) Create another order for a vendor, choosing a fund to use for that
order.
5) Receive the order, this time changing the fund. Make sure the fund
is changed.
6) Run the unit test:
> prove t/db_dependent/Acquisition.t
7) Sign off.
(Notes: this patch depends on the Acquisitions.t unit test improvements
in bug 10274; the seemingly-unrelated change in SQLHelper quiets an
irritating warning caused by the NewOrder call in ModReceiveOrder)
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Given how easy it is to accidentally receive items from one invoice on
multiple invoices, the ability to merge invoices can be quite handy.
This patch adds that ability to Koha's Acquisitions module.
To test:
1) Apply patch.
2) Run unit test:
> prove t/db_dependent/Acquisition/Invoices.t
3) Create two invoices from the same vendor for merging, and receive at
least one order on each.
4) Do a search on the Invoices page that brings up both the invoices you
created.
5) Check the boxes next to the two invoices.
6) Click "Merge selected invoices."
7) Choose which invoice you want to keep (the default will be the first).
8) Click "Merge."
9) Confirm that the resulting invoice has all the orders you received
listed on it.
10) Sign off.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Merged several invoices sucessfully - with and without received
orders, open and closed. Works nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new filter "basket group name" for pending orders
searches.
Test plan:
Try different filters and check that results are consistent.
Try to filter by basket group name.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Applied on top of patches for bug 10723.
Passes all tests and QA script.
Note: It's a bit irritating that the basket name is not shown
in the list of pending orders, so there is no way to check the
results are correct without checking from another page.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the C4::Acquisition module, 2 routines do the same work. This patch
merges these 2 routines.
Test plan:
test the acqui/orderreceive.pl, acqui/uncertainprice.pl
and serials/acqui-search-result.pl, acqui/parcel.pl scripts.
Note: on acqui/parcel the basket filter is a search on basket name (was
on basket id, which was not relevant).
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pm, no adverse bahaviors noted. All sub calls updated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Fixes problem, but I think is better to remove
=back than to add nother =over 4, but I'm not
a POD expert
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adapts the fund-handling code from neworderempty.pl
in order to limit the display of funds by default to active ones,
with the option to check a box to display all funds.
This patch also adds "(inactive)" to the display of funds on this and
the neworderempty.tt template because it seemed like that was useful
information.
To test, make sure you have both active and inactive funds.
Start the process of receiving a shipment. The "fund" option
in the receive shipment form should show only active funds.
Checking the "show all" checkbox should allow you to choose
from both active and inactive funds.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a DataTables sorting plugin, title-numeric,
for sorting cells based on a decimal number embedded in a span title
attribute. This allows currency amounts to be formatted properly
for display without having to writing a sorting plugin that's
super-smart about removing the formatting, particularly for locales
that use a comma as the decimal mark.
The sorter plugin can be used like this:
- In the DataTables config:
"aoColumns": [
{ "sType": "title-numeric" },
]
- In the table data
<td><span title="[% decimal_number_that_JS_parseFloat_accepts %]">
[% formatted currency %]
</span></td>
To test:
[1] Ensure that there is at least one active budget and at least
one inactive one.
[2] Go to the acquisitions home page. Note that changing the sort order
on the amount, ordered, spent, or avail columns results in incorrect
sorting that is either ASCII-betical or which ignores any component
of large numbers that occur after the thousands separator.
[3] Apply the patch.
[4] Verify that the sorting now works correctly and that no JavaScript
errors appear in the JS debug console of your choice.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Sorting now works correctly, for active and inactive funds.
Passes all tests and QA script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch implements some of the suggestions made
by Owen Leonard and brings the form closer in line
with other popup forms. In particular:
- sets dimensions for the popup so that clicking on the
link is more likely to open a new browser window, not
a tab.
- ensures that the vendor search form is always visible
- adds a cancel link to make it more clear to library
staff that they can abort the process.
- tweaks markup to better match the patron guarantor
popup search form
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This allow to keep transfers informations without having untranslatable
strings in database.
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On basket.pl and parcel.pl there is a 'Transfer' link which allow you to
transfer order lines from a basket to another.
The link leads to a new page which allow you to search for a bookseller,
then display this bookseller's baskets. Then you can pick a basket and
the transfer will be done.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds an "add to basket" link to the vendor search results
page for each open basket associated with each vendor. Clicking it
triggers a modal window with the "add to basket" choices for that vendor
and basket.
Other changes in this patch:
- The add-to-basket include has been modified in order to make it more
useful in this context.
- booksellers.pl has been modified to check for an existing budget so
that the add-to-basket include can properly display a warning if there
are none.
- "New basket" and "Receive shipment" buttons associated with each
vendor search result have been converted to Bootstrap-styled buttons.
- Basket closed date has been moved into its own column so that the
table can be sorted by that value.
- Table columns containing dates now use the "title-string" sort option,
eliminating the need for a special date sorting algorithm.
- Converted some &'s to &'s
To test, apply the patch and search for a vendor. For each vendor in
your search results baskets which are open should include an "add to
basket" link. Clicking it should open a modal dialog with the same "add
to basket" options offered on the basket page. The correct vendor ID and
basket number should be associated with each link.
The newly-styled "new basket" and "receive shipment" buttons should work
correctly. Table sorting should work correctly, including the new
"closed" column.
Since the add-to-basket include file was modified, the "add to basket"
button on the basket view page should also be tested (acqui/basket.pl).
Signed-off-by: Campbell Reid-Tait <campbellreidtait@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
