Check whether a given update should be run when passed the proposed
version number. The update will always be run if the proposed version
is greater than the current database version and less than or equal to
the version returned by C4::Context->final_linear_version (initially set
to be equal to the version in kohaversion.pl). The update is also run if
the version contains XXX, though this behavior will be changed following
the adoption of non-linear updates as implemented in bug 7167.
To test:
1) Make sure that the first example database update added by this patch
in installer/data/mysql/updatedatabase.pl has a version number one
greater than the version of Koha you have installed.
2) Set the Version syspref back one version behind your current version.
3) Navigate to the main page of the staff client, and log in to the
installer.
4) Confirm that the update page claims to have rerun the previous update
and has displayed the log message:
"Upgrade to 3.11.00.XXX done (Bug 9191: You should see this)"
but not the log message:
"Upgrade to [version number] done (Bug 9191: You shouldn't see this)"
Note: the sample database revisions will be removed by the RM before
this patch is pushed to master.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
works great
Signed-off-by: Elliott Davis <elliott@test.bywatersolutions.com>
Works as expected. Test plan is great. Code looks to be adherent to standards.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This is due to raising all db errors combined with the fact that attempts
to make selections from a non-existent systempreferences table raises db errors.
The installer should run even with DEBUG set, otherwise dropping and recreating
a development database becomes somewhat of a chore. This patch adds code to
check for the existence of the systempreferece table. If the table exists, then
RaiseError is enabled on the database handle. Otherwise it is disabled to allow
the installer to run without throwing an error.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The installer can now be run both with and without DEBUG set.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Because C4::Context uses an in-memory hash for caching sysprefs,
changing a syspref under a multi-threaded persistent environment
requires a server restart. This patch makes it possible disable
the syspref cache.
To test:
1) If you are using a multi-threaded persistent server (Starman, etc.),
change a syspref and note that the effects of the syspref change may
or may not be visible on any given request before applying this patch.
You will need to choose a syspref with obvious effects that can be
seen by simply refreshing the page. I recommend enabling or
disabling additional languages in the OPAC, since you can refresh the
page a dozen times and reasonably expect to see the new behavior you
set only 1/n of the time.
2) Apply patch.
3) Add "C4::Context->disable_syspref_cache();" to your koha.psgi file
4) Repeat step 1, noting that you never see the stale behavior.
5) Run test at t/db_dependent/Context.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All tests passed.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Modify Makefile.PL and Zebra configuration files in order to parametrized
biblio record type returned by Zebra Z39.50 server.
How to test:
- Test with a MARC21 and a UNIMARC DB
- Do a new installation
- Search from OPAC
- Search from a Z39.50 client like yaz-client: syntax = MARC21/UNIMARC must be
choosed
- It was working for MARC21: it continues to work
- It wasn't working for UNIMARC: it works now, both in OPAC and from a Z39.50
client
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works fine for MARC21. Frederic looked at UNIMARC. Magnus looked at NORMARC.
GRS1 works okay for me. I still have issues with DOM, but they are not directly related to changes in this patch.
A followup is still needed for packaging (debian/templates).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
"return" statement with explicit "undef" at line 486, column 5. See page 199 of PBP. (Severity: 5)
Subroutine prototypes used at line 548, column 1. See page 194 of PBP. (Severity: 5)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Expose authority import functionality to the command line import
scripts, and rename them from commit_biblios_file.pl and
stage_biblios_file.pl to commit_file.pl and stage_file.pl.
To test (note that these instructions assume you have a MARC21
installation and are using the provided sample file):
1. Find a file of authorities (a sample file with MARC21 authorities
is attached to bug 7475) and download it to your server
2. Stage the file using the following command (replace <filename> with
the name of the file you saved in step 1):
> misc/stage_file.pl --file <filename> --authorities
3. Note the batch number the script assigns to your batch
4. Commit the records using the following command (replace <batchnumber>
with the batch number you made note of in step 3):
> misc/commit_file.pl --batch-number <batchnumber>
5. Index the authorities Zebraqueue (or wait)
6. Confirm that the new authorities appear.
7. Create a matching rule with the following settings:
Code: AUTHTEST
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
Search index: Heading-main
Score: 1000
Tag: 100
Subfields: a
Offset: 0
Length: 0
(note the ID of this matching rule)
8. Stage the authority file again, this time using the following
command:
> misc/stage_file.pl --file <filename> --authorities \
--match <matchingrule>
7. Revert the import with the following command:
> misc/commit_file.pl --batch-number <batchnumber> --revert
8. Index the authorities Zebraqueue (or wait)
9. Confirm that the records have been removed
10. Import an authority record with the Stage MARC/Manage staged MARC
tools in exactly the way you would for a bibliographic record,
but choose "Authority" instead of "Bibliographic" for the record
type.
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Testing plan delivers as it should.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
This reverts commit 215abc8024.
The 3 patches for bug 8089 have been reverted, because they break
jenkins & Koha.
A follow-up has been provided, but it does not solve the problem on my
test server, it just changes the error message.
After a discussion with jared, Dobrica should work on another patch, so
the best option is to revert.
Cache sysprefs using Koha::Cache in a way that is safe even for
caching-related sysprefs. This lays the groundwork for removing
caching configuration from the httpd.conf and configuring it
using sysprefs.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
1. Replace all instances of memoize_memcached with appropriate calls
into Koha::Cache:
* reports/guided_reports.pl
* C4::Biblio::GetMarcStructure
* C4::Languages::getFrameworkLanguages
* C4::Languages::getAllLanguages
* C4::SQLHelper::GetPrimaryKeys
* C4::SQLHelper::_get_columns
2. Replace all references to memcached with the appropriate calls into
Koha::Cache in C4::Context.
Test plan :
* have DEBUG env set to 1
* reach addbiblio page to test the patch in Biblio.pm, or setup more than 1
language
* you should see in the logs that you're reading and writing from cache
* run the test suite twice both with and without the following environment
variables set:
export MEMCACHED_SERVERS=127.0.0.1:11211
export MEMCACHED_NAMESPACE=KOHA
export CACHING_SYSTEM=memcached
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm unsure about some of the caching times 10000 is a long long time,
but other than that, works fine.
Will be required by rolling loans to get correct times
NB the setting of the TZ in mysql has not been changed as
this appears to rely on $ENV{TZ} being undefined
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Confirmed that memcached is still being used after the memcached configuration
in koha-conf.xml was removed, and the following two lines were added to
both virtual hosts in koha-httpd.conf:
SetEnv MEMCACHED_SERVERS "127.0.0.1:11211"
SetEnv MEMCACHED_NAMESPACE "KOHA"
Basically I add some code to Context.pm so it stores koha-conf.xml config vars
in memcached server. It is arguable whether this is an improvement or not,
tests are needed to conclude something about this.
Error handling was an issue with Cache::Memcached, I tried to do it the
simplest I could.
Note: As it was pointless to read the xml file to get the memcached
server info for accessing them for retreiving the info in the koha-conf.xml
file... I passed those values through apache's SetEnv. These variables
are set acordingly through the install scripts and commented out if koha
was setup not to use it.
Bug 6193 - Properly comment the code
Required by slef.
Regards
To+
Signed-off-by: Federico Rinaudo <frinaudo@infocpt.com.ar>
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Checking NYTProf in C4::Context, it appears that the /i flag is highly time-consumming
As we don't support anything outside from mysql, returning directly mysql directly
If in a future version PostgresSQL works, then we will have to update this sub. But if an ORM is introduced, this code will be removed completly anyway
Testing note:
Drops execution time of the line from 300ms to 20 microseconds (in my testing).
Before this patch, if a mySQL occured in Koha (any error), then the user was seeing nothing.
With this patch, if DEBUG is set in Koha VirtualHost, any mySQL error will make Koha die and display the SQL error
Step to test:
=== BEFORE PATCH ===
go anywhere, and change a mySQL statement to make it invalid.
Launch a page using the SQL you've made wrong, you'll see nothing, except you won't see the expected results
=== AFTER PATCH ===
Modify koha-httpd.conf, and add the following line, in the virtualhost (if it does not already exist)
SetEnv DEBUG 1
restart/reload Apache
Launch the same page, you'll get a Perl statement saying something like:
DBD::mysql::st execute failed: <<blablabla SQL error>> at <<where the error was raised line <<error line>>
XML::Simple returns by default an empty hash ref if it encounters an xml tag
with no attributes or content. If memcached_servers is empty, as the installer
sets it when this feature is disabled, then we get the empty hash ref.
In checking if memcached_servers is set the empty hash ref evaluates as true.
I.E.
$servers = C4::Context->config('memcached_servers');
if ($servers) {
so we get a comiler error from memcached trying to resolve the nonexistant
server address.
This reverts commit 7a3bdce23d.
Even though patches were submitted that fixed the breakage
that this commit caused to NoZebra searchs, it turns out
this breaks code that uses SimpleSearch - clients of that
routine currently expect ISO2709 blobs, not MARCXML.
No further patches for 3226 will be pushed until a complete,
comprehensive patchset is submitted that (a) includes a
test case for the original bug and (b) demonstrates that
it doesn't break any aspect of bibliographic and authority
searching.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When displayed on result page, some UNIMARC biblio
records are marc8 to utf8 converted for whatever
reason! It appears that iso2709 records in Zebra can't
always properly by used to construct MARC::Record.
This patch ask Zebra to return xml record rather than
iso2709 and use it to create MARC::Record (like
C4::GetMarcBiblio). i
Fix facet display.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When displayed on result page, some UNIMARC biblio
records are marc8 to utf8 converted for whatever
reason! It appears that iso2709 records in Zebra can't
always properly by used to construct MARC::Record.
This patch ask Zebra to return xml record rather than
iso2709 and use it to create MARC::Record (like
C4::GetMarcBiblio).
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
* more portable way to determine uname for
crash messages
* C4::Context->userenv now returns undef instead
of 0 if no userenv has been set yet; returning
undef when necessary is almost always better
than returning a scalar when a hashref is
normally expected.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Refactoring KOHAVERSION to be less crufty, enabling use warnings, change formatting slightly in places.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
C4::Installer provides a way to update the kohaversion syspref. Now that
C4::Context caches syspref values, any updated value through C4::Installer
is not being seen.
This patch adds a method to C4::Context to allow you to clean that
cache. Then, it calls that method when the kohaversion syspref is changed.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch employs process-local caching of systempreferences and
eliminates the "select 1" execution every time dbh() is called.
DBI::ping() is used instead.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Support multiple timezones via Apache SetEnv. See the perldoc for
admin/env_tz_test.pl on how to configure and test. Minimal changes
to Context itself.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
C4::Context->preference was not using placeholders and was potentially vulnerable to
a SQL injectin attack. This patch refactors the method to use placeholders.
Added some tests for C4::Context.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Adding code to refresh "Lists" button lists display in OPAC masthead.inc
Adding javascript to force refresh of parent window to update "Lists" button menu
Adding query limits and ability to specify row count and offset in queries related to Virtualshelves.
Also added the ability to return total record counts for specified virtualshelves.
Adding C4::VirtualShelves::GetRecentShelves which returns a list of the most recently modified shelves for
a given set of parameters. This allows the user to be offered active private and open lists to add books
to in drop down menus while also allowing drop down menus to be limited to a reasonable length.
This also limits the shelves stored in the user's session to a fixed number. A further enhancement might
be to add a syspref to enable a staff member to define the limit. Currently it is hardcoded at 10 per
list type (private/public-open).
Adding pagination to list/shelf related screens
Moving refresh shelves code into C4::VirtualShelves::RefreshShelvesSummary and tidying up a bit
Correcting several inconsistancies in the shelves templates as well as handling shelf management on
the intranet side correctly.
Correcting "Add To:" drop-down list to show only lists the patron has permission to add to
Correcting a few C4::VirtualShelves::GetShelvesSummary API calls
Modifications for template consistancy
Breaking up a 1367 char line of javascript in opac-results.tmpl
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Jared Camins-Esakov
Chris Nighswonger
Frédéric Demians
Mason James
Paul Poulain
Chris Cormack
Colin Campbell
Tomás Cohen Arazi
Julian Maurice
Henri-Damien LAURENT
Stéphane Delaune
Galen Charlton
Andrew Elwell
Lars Wirzenius
Matthias Meusburger
Jesse Weaver
Michael Hafen
Galen Charlton
Joe Atzberger
stan
Andrew Moore
Clay Fouts
Marc Chantreux
Chris Nighswonger
Chris Cormack
Joshua Ferraro
MJ Ray