To test:
1 - Set 'AllowFineOverride' to allow
2 - prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
3 - 1 test fails
4 - Apply patch
5 - prove t/db_dependent/Circulation/NoIssuesChargeGuarantees.t
6 - All tests pass
7 - Set 'AllowFineOverride' to 'Don't allow'
8 - Tests should still pass
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The values parameter should be called value.
See bug 15339.
Test plan:
Run the adjusted tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Make sure we are not just returning J-1 and clear the cache before and
after the tests.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This GetReserve subroutine can be replaced with Koha::Holds->find
Test plan:
- git grep GetReserve
must not return results where GetReserve is called
- Cancel a reserve
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the regular situation, you can get itemtype via biblio and then
biblioitem as well as via biblioitem (at least when item-level_itypes
is set to biblio).
But since Koha unfortunately defined two relations in item, one for
biblioitemnumber (the good one) and one for biblionumber (redundant),
TestBuilder (correctly) builds one biblioitem and two biblios.
If you item-level_itypes to biblio record, this will result in failing tests
when calling AddReturn (in this case Koha/Patrons.t).
It will crash on:
Can't call method "itemtype" on an undefined value at C4/Circulation.pm line 1826.
Cause: AddReturn goes via the biblionumber to biblio and than to
biblioitems, and it does not find a biblioitem. (Not a fault from TestBuilder
but a database design problem.)
This patch makes a small change in AddReturn to retrieve the itemtype via
biblioitem. It actually is a shorter road than items->biblio->biblioitems.
Note: I do not test the Biblioitems->find call, since we already checked
the GetItem call before and we have a foreign key constraint.
I did not call $item->effective_itemtype since we still use GetItem; this
could be done later.
Adjusted Circulation/Returns.t too: If we add an item with TestBuilder and
we called AddBiblio before, we should link biblioitemnumber as well.
Test plan:
[1] Do not apply this patch yet.
[2] Set item-level_itypes to biblio record.
[3] Run t/db_dependent/Koha/Patrons.t. (It should fail.)
[4] Apply this patch.
[5] Run t/db_dependent/Koha/Patrons.t again.
[6] Run t/db_dependent/Circulation/Returns.t
[7] Git grep on AddReturn and run a few other tests calling it.
Note: Bugs 19070/19071 address three tests that call AddReturn too.
[8] In the interface, check in a book.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: Bugs 19070 and 19071 are already pushed. The command in comment #4
has all the tests successful.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added one unit test when the syspref useDaysMode is active.
This does not move code anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The test files do not need to return 1
Patch generated with:
perl -p -i -e "s/^1;\n//xsm" t/**/*.t
Test plan:
git grep '^1;$' t/**/*.t
should not return any results
NOTE: does not fix C4/SIP/t, nor xt tests.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolve:
DBD::mysql::db do failed: Cannot delete or update a parent row: a foreign key constraint fails (`koha_master`.`clubs`, CONSTRAINT `clubs_ibfk_2` FOREIGN KEY (`branchcode`) REFERENCES `branches` (`branchcode`)) [for Statement "DELETE FROM branches"] at t/db_dependent/Circulation/issue.t line 65.
Cause:
See also bug 19070.
We do not need to delete all branches here.
Test plan:
Run t/db_dependent/Circulation/issue.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolve:
DBD::mysql::db do failed: Cannot delete or update a parent row: a foreign key constraint fails (`koha_master`.`clubs`, CONSTRAINT `clubs_ibfk_2` FOREIGN KEY (`branchcode`) REFERENCES `branches` (`branchcode`)) [for Statement "DELETE FROM branches"] at t/db_dependent/Circulation/Branch.t line 49.
Resolve:
not ok 14 - AddReturn respects branch item return policy - noreturn
Failed test 'AddReturn respects branch item return policy - noreturn'
at t/db_dependent/Circulation/Branch.t line 279.
got: 'yqiKrIkX'
expected: undef
Cause:
There is a record in clubs. The constraint in clubs on branchcode does not
include a cascaded delete. The test deletes all branches.
Test 14 depends on item-level_itypes==1. When you set it to Biblio, it fails.
Test plan:
Run t/db_dependent/Circulation/Branch.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha suffers of big bugs due to its history: When data are deleted, they
are moved to another tables.
For instance issues and old_issues: when a checkin is done, it is moved
to the old_issues table.
That leads to a main problem that is described on
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
However we tried first to fix the problem (for issues/old_issues) at
code level on bug 18242.
The goal was to prevent data lost.
Data lost may happens in this case:
Check an item out (issue_id = 1)
Check an item in (issue_id = 1)
Restart MySQL (reset auto increment for issue_id to 1)
Check an item out (issue_id = 1)
Check an item in => BOOM, the issue_id is a PK in old_issues and the
move fails.
Before bug 18242 the data were lost, we inserted the value into
old_issues, which fails silently (because of RaiseError set to 0 in
Koha::Database), then delete the row from issues.
That has been fixed using a transaction.
This patch introduced a regression we tried to fix on bug 18651 comment
0, the patron was charged even if the checkin was rejected.
A good way to fix that would have been to LOCK the tables:
1- Start a transaction
2- LOCK the table to make sure nobody will read id and avoid race
conditions
3- Move the content from one table to the other, dealing with ids
4- UNLOCK the table
5- Commit the transaction
But there were problems using LOCK and DBIx::Class (See commit
905572910b - Do no LOCK/UNLOCK the table).
Finally the solution implemented is not acceptable for several reasons:
- batch checkins may fail
- issue_id will always stay out of sync (between issues and old_issues)
See 18651 comment 66.
Since the next stable releases are very soon, and we absolutely need to
fix this problem, I am suggesting to:
1- Execute the move in a transaction to avoid data lost and reject the
checkin if we face IDs dup
=> It will only reject 1 checkin (max is 1 * MySQL restart), no need to
deal with race conditions,
2- Display a warning on the checkin page and link to a
solution/explanation
3- Communicate as much as we can on the proper fix: Update auto
increment values when the DBMS is restarted -
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
4- Display a warning on the about page for corrupted data (see bug
18931)
5- Write and make available a maintenance script to fix corrupted data
(TODO LATER)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'OpacRenewalBranch' to various settings
2 - Renew an item for a ptron under each setting
3 - Confirm action_log entries reflect the correct branch for each
secnario
4 - prove t/db_dependent/Circulation/issue.t
Signed-off-by: David Kuhn <techservspec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Item does not have a title attribute, it comes from biblio
- There is an additional call to effective_itemtype done on AddReturn,
so we need to catch both warnings
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Circulation::GetItemIssue returned all the issue and item
informations for a given issue. Moveover it also did some date
manipulations. Most of the time this subroutine was called, there
additional information were useless as the caller usually just needed
the basic issue's infos 'from the issue table).
This first patch updates the simple calls, ie. the ones that just need
the issue's infomations.
Test plan:
The following operations should success:
- transfer a book
- create a rule for on-site checkouts and confirm that a patron cannot
check more items out that it's defined in the rule.
- Renew an issue using ILSDI
- Using SIP confirm that you are able to see your issues
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following test is failing on Jenkins:
# Subtest: Handle ids duplication
1..4
ok 1 - No account lines should exist on old issue_id
not ok 2 - Two account lines should exist on new issue_id
ok 3 - AddReturn should return the issue with the new issue_id
ok 4 - If an item is checked-in, it should be moved to old_issues even if the issue_id already existed in the table
not ok 4 - Handle ids duplication
When no circ rule exist
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
2. If the move fails for whatever reason (see
https://lists.katipo.co.nz/pipermail/koha/2017-May/048045.html for an
example), fines can be charged. It should not
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
1. AddReturn returns a $issue hashref with the old issue_id value
=> At first glance it does not affect anything, but would be good to fix
it for future uses.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Couldn't make the tests pass using Test::DBIx::Class, so reverted to the "usual way" since these tests are
in db_dependent anyway.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
prove all these tests, they must all pass
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Clean a bit existing tests by adding default values and add a test to
highlight the issue.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The next patch will move C4::Circulation::AnonymiseIssueHistory and
C4::Members::GetBorrowersWithIssuesHistoryOlderThan to Koha::Patrons
This patch move the history anonymisation code to the Patrons.t test
file and the entire subtest related to StoreLastBorrower to
StoreLastBorrower.t
It just moves and add some minor adjustements.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If IndependentBranches is set, the code is buggy. This patch only
highlight the bug by providing a test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should require a circulation rule to allow checkouts and reject them
if no rules are defined.
Test plan:
- Delete all issuing rules
- Check an item out
=> Without this patch the checkout is allowed
=> With this patch applied it is rejected
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* C4/Circulation.pm (GetTransfers, GetTransfersFromTo): Also return
branchtransfer_id in return columns.
* installer/data/mysql/atomicupdate/14187.perl: New file.
* installer/data/mysql/kohastructure.sql: Modify branchtransfers structure.
* t/db_dependent/Circulation/transfers.t: Update tests to expect
branchtransfer_id.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan successful on all steps.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove Schema changes from this patch
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ready for an archaeology course?
C4::Circulation::GetItemIssues is only used once, from
catalogue/issuehistory.pl
This call has been added by
commit 95d6452462
Adding some more information on issuehistory.
which says "Adding itemnumber to issuehistory.pl API so that one could search
for issuehistory of a specific item."
So it added the ability to see the item issue history but did not
provide a way to access it via the interface.
It's ok so far but this subroutine is broken since
commit aa114f5349
Bug 5549 : Only use DateTime for issues table
because of this change:
- my $today = C4::Dates->today('iso');
+ my $today = DateTime->now( time_zome => C4::Context->tz);
I let you catch the typo ;)
And since this commit the subroutine explodes with "The following
parameter was passed in the call to DateTime::from_epoch but was not
listed in the validation options: time_zome"
Since it has never been raised by someone and that the feature is
hidden, I'd recommend to simply remove it.
Note that the "Checked out from" column would have been wrong even if we
fixed all the previous issue.
Test plan:
Just dig into the code and confirm what this commit message tells
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Looks fine for me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For no discernable reason, when AddIssue calls AddRenewal, it passes the
branchcode generated from _GetCircControlBranch. Assume
_GetCircControlBranch is set to return items.homebranch. So:
1) If an item owned by LibraryA is checked out at LibraryB, the
statistic line branchcode will be LibraryB
2) If an item is renewed via the ajax datatables renewal function, the
statistic line branchcode will be LibraryB the
3) If an item is renewed via scanning the item into the checkout again,
statistic line branchcode will be *LibraryA*
This is clearly improper behavior. The renewal is taking place at
LibraryB, so the branchcode passed to AddRenewal should be LibraryB,
the logged in library. This also jives with the documentation for
the subroutine.
Test Plan:
1) Set CircControl to "the library the item is from" aka ( ItemHomeLibrary )
2) Set HomeOrHoldingBranch to 'The library the items is from" ( aka homebranch )
3) Create item with homebranch of LibraryA and holdingbranch of LibraryB
4) Set the logged in library to LibraryB
4) Check the item out to a patron at LibraryB
5) Note the statistics line has a branchcode of LibraryB
6) Check the item out again to trigger a renewal, renew the item
7) Note the statistic line has a branchcode of LibraryA!
8) Apply this patch
9) Repeat step 6
10) Note the statistics line has a branchcode of LibraryB!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Kuhn <kuhn@monterey.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Circulation::GetIssues subroutine is only called once and can be
replaced with a call to Koha::Isues->search with a join on items.
Test plan:
- Apply first patch and make sure the tests pass
- Apply second patch and make sure the tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation* create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation*
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation*
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/GetIssues.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/GetIssues.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/GetIssues.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All test pass successfuly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If memcached is running, the pref's value will be set in cache, what we
do not want.
t/db_dependent/Context.t and t/db_dependent/sysprefs.t are exceptions
for obvious reasons.
Test plan:
Make sure all these tests still pass
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you run TooMany or MultiplePerRecord.t after
t/db_dependent/Circulation/Returns.t (for instance) and that you are
running memcached, item-level_itypes will be 0.
These tests assume that the pref is 1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/IssuingRules/maxsuspensiondays.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/IsItemIssued.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/IsItemIssued.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/IsItemIssued.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the tests use t::lib::TestBuilder instead of
hardcoding values.
Test plan:
- Run:
$ prove t/db_dependent/Circulation/issue.t
=> SUCCESS: All tests return green with and without the patch
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes t/db_dependent/Circulation/issue.t create
good sample data for its tests. It does so by creating a random
itemtype.
To test:
- Run
$ prove t/db_dependent/Circulation/issue.t
=> FAIL: lots of warnings about "item-level_itypes set but no itemtype
set for item"
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/issue.t
=> SUCCESS: Tests are green, and no warnings.
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds tests for C4::Circulation::AddReturn(). Both tests are wrapped
inside a subtest, and look for AddReturn storing the right itemtype on the
'statistics' table.
Note: It also refactors the file a bit, to avoid side effects. And uses TestBuilder
to make it independent on already-present db data. It also removes warnings by mocking
C4::Context::userenv
To test:
- Apply the patch
- Run the tests:
$ prove t/db_dependent/Circulation/Returns.t
=> FAIL: Tests fail bacause AddReturn is not storing the itemtype
- Sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes MarkIssueReturned.t use t::lib::TestBuilder to create
the data it needs.
To test:
- On master, have a category with categorycode = C
- Run:
$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> FAIL: primary key problems make the tests fail
- Apply the patch
- Run:
$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests are green!
- Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
