Test Plan:
1) Set ExpireReservesMaxPickUpDelay
2) Set ReservesMaxPickUpDelay to 1
3) Place a hold, set it to waiting
4) Using the MySQL console, modify the waiting date and set it to the
day before yesterday.
5) Set today as a holiday for the pickup branch in question.
6) Run misc/cronjobs/holds/cancel_expired_holds.pl
7) The hold should remain unchanged
8) Remove today as a holiday
9) Run misc/cronjobs/holds/cancel_expired_holds.pl again
10) The hold should now be canceled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When itemtype is defined on biblio (item-level_itypes syspref), the
method C4::Reserves::CanItemBeReserved uses item->{itemtype}. But
ithe item comes from C4::Items::GetItem and it does not have an
'itemtype' key; in this method the item type value is always in
'itype' key.
This patch corrects it.
Test plan:
You should have itemtype on biblio and 'item-level_itypes' syspref
set to biblio.
This test plan is with ReservesControlBranch on ItemHomeLibrary.
- Choose a branch, a borrower category and an item type, for example
'NYC', 'CHILD' and 'DVD'
- Set an issuing rule for 'NYC', CHILD' and 'DVD' with 'Holds allowed'
set to 10
- Set an issuing rule for 'NYC', CHILD' and all item types with
'Holds allowed' set to 0
- Choose an item of a biblio with itemtype 'DVD', that can be reserved,
with 'NYC' as homebranch
- Choose a borrower with category 'CHILD'
- Try to request the item for the borrower
=> without the patch, you can
=> with the patch, you can't
You may check reserve is allowed with 'Holds allowed' > 0 on issuing
rule for 'DVD'.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Great test plan - thanks!
Confirmed the bug, and the fix. Looks good to me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a situation where a patron that has preferences
set for transport of a notice via a method that is not supported
for that notice type can result in a failure. Rather than
make it a fatal error during checkin, simply log a warning and skip.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch prevents duplicate hold available print notices from being
sent and enforces making a print notice if no other transports can be
used.
-------------------------
- REPLICATING THE ISSUE -
-------------------------
1. Set a Patrons "Hold filled"-messaging preference to SMS + Email
2. Remove the SMS number (sms notification number) and all email
addresses.
3. Make a reservation for this Patron.
4. Check-in the reserved Item.
5. message_queue-table has two generated print notices for the
Hold_filled event.
One for both failed message transport types, email and sms.
1. Set a Patrons "Hold filled"-messaging preference to empty, remove all
checks from boxes.
2. Make a reservation for this Patron
3. Check-in the reserved Item.
4. message_queue-table has no message for the Hold-filled event. This is
problematic because a Patron should get some kind of a notification
for a filled Hold.
-----------------------------
- AFTER APPLYING THIS PATCH -
-----------------------------
If all message transport types for "Hold filled" fail, a print notice is
queued in the message_queue table. Only one print message is queued even
if many transports attempts fail.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The HOLD_PRINT and HOLD_PHONE notices become useless.
This patch modifies existing notices in order to group them into the
main notice type 'HOLD', with any pre-existing print and phone
templates in the appropriate places.
Test plan:
- Apply the patch and execute the update database entry.
- Verify that your previous HOLD_PHONE and HOLD_PRINT are displayed
when editing the HOLD notice (under phone and print).
- Choose a patron and check SMS, email, phone for "Hold filled"
(on the patron messaging preferences).
- Place a hold.
- Check the item in and confirm the hold.
- If the patron has an email *and* a SMS number, 2 new messages are put
into the message_queue table: 1 sms and 1 email.
If the patron does not have 1 of them, there are 2 new messages: 1
sms/email and 1 print.
If the user has neither of them, there is 1 new message: 1 print.
- The generated messages should correspond with the notices defined,
depending the message transport type.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Just noting that if email and SMS are disabled in the msg prefs, the user
will not have a print message.
And if the SMS driver fails, the record status in message_queue is 'failed',
but staff may not be aware of that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue originally reported by bug 11702.
RM note: the patch is clear enough and doesn't break existing tests,
but on the other hand, I have been completely unable to reproduce
the original issue.
To test:
[1] Verify that prove -v t/db_dependent/Holds.t passes
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
AllowHoldsOnDamagedItems will stop item-specific holds from being placed
on damaged items, but does not stop Koha from using damaged items to
fill holds. This seems like incorrect behavior.
Test Plan:
1) Set 'AllowHoldsOnDamagedItems' to "Don't Allow"
2) Pick an item, set it to damaged
3) Place a bib-level hold on this item's record
4) Scan the item though the returns system
5) Koha will ask to use this item to fill the hold, click "ignore"
6) Apply this patch
7) Repeat step 4
8) Koha will not ask to use this item to fill the hold
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The priority of new hold requests was not calculated when using ILS-DI.
A new routine is added, C4::Reserves::CalculatePriority(), to calculate
the priority prior to placing a request.
A separate bug report, 11640, covers the changes in reserves to
use this new routine more generally.
This patch does therefore only affect ILS-DI.
Note: ILS-DI already allows you to generate multiple holds on a biblio or
item for the same patron. This patch does not change that behavior.
Test plan:
[1] Place multiple holds using ILS-DI HoldTitle service:
/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&request_location=test
Check the priority.
[2] Do the same using HoldItem service:
/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=BORROWERNUMBER&bib_id=BIBLIONUMBER&item_id=ITEMNUMBER
Check the priority again.
[3] Use a biblio with multiple items. Place item level holds on both.
Check in one of these items in another branch. Confirm transfer.
Check in the other item in the original branch. Confirm hold.
Now you have a waiting and a transit hold.
Test HoldTitle and HoldItem service again a few times.
[4] Enable AllowHoldDateInFuture and add a future hold.
Now test HoldTitle and HoldItem again and check if these holds are
inserted before the future hold (lower priority).
January 29, 2014: Rebased this patch and amended it to make a distinction
between fixing the ILS-DI bug and using the new routine.
Updated commit message and test plan (marcelr).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the POD for C4::Reserves::_FixPriority()
to (hopefully) describe its function thoroughly. It also
adjusts the call of _FixPriority() by CancelReserve() to
omit passing reserve_id, since by that point no row in
the reserves table for that request still exists.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where a patron could receive duplicate
hold waiting notifications. For example, this could happen if a
circ operator checked in an item more than once and confirmed the
same hold each time.
To test:
[1] Set up a test patron that received hold waiting notifications.
[2] Put an item on hold for the patron, then check the item in
and confirm the hold. Verify that a hold notification is
sent (or inspect the message_queue table).
[3] Check the item in again and confirm the hold again. A duplicate
hold notification will be generated.
[4] Apply the patch.
[5] Repeat steps 2 and 3. This time, only one notification should be
generated.
[6] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a column to indicate holds on received items, as well as adding
a new column for fund and showing the subtotals per fund above
the total subtotal.
To test:
[1] Create an order basket containing at least one title and
ensure that an item is created for that title. Close the
basket.
[2] Place a hold on the title.
[3] Receive the order. After receiving it, but before finishing
the invoice, the table of already received orders should now
have columns for the order budget and number of holds on the
title as well as lines with the subtotal per fund.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Similar to other patches from the same author
I run prove t/db_dependent/Reserves.t without errors
don't know if more tests are needed.
No koha-qa errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This fixes a regression introduced by the patch for bug
9394 -- when printing a hold slip using the 'print and confirm'
button, the slip would contain only the text 'reserve not found',
not a full hold slip.
This patch also adds a regression test.
To test:
[1] Check in an item that would fill a hold. Use the 'print
and confirm button' to confirm the hold.
[2] The printout will only contain text to the effect of
'reserve not found'.
[3] Apply the patch.
[4] Repeat step 1. This time, a full hold slip should be printed.
[5] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pass all tests, new and old, and QA script.
Verified wrong and corrected behaviour.
Note: Sometimes there will not be the message 'reserve not found'
showing up, but hold information for a different record. This happens
when there exists a reserve_id with the borrowernumber of the patron
in question in your database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CheckReserves was using the CircControl system preference to determine what
patrons an item can fill a hold for. It should be using ReservesControlBranch
instead.
Test Plan:
1) Set ReservesControlBranch to "item's home library".
2) Create an item at Library A, place holds for it for patrons at
Library B, Library C, and Library A in that order,
for pickup at the patrons home library.
3) Make sure the holds policy for Library A is set to
Hold Policy = "From home library" and
Return Policy = "Item returns home".
Make sure the holds policies for the other libraries are set to
Hold Policy = "From any library".
4) Check the item in at Library C, the hold for the patron at Library B
should pop up, even though it's in violation of the circulation rules.
Don't click the confirm button!
5) Apply this patch, and reload the page,
now the hold listed should be for the last hold,
the hold for the patron at Library A, which is correct.
This patch adds the subroutine C4::Reserves::GetReservesControlBranch as
an equivilent to C4::Circulation::_GetCircControlBranch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed POD so that arguments and explanation match (C<$item>).
Also tested opac-reserves.pl for regressions.
Passes all tests, QA script, and Reserves.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable the syspref emailLibrarianWhenHoldIsPlaced
2) Modify the HOLDPLACED notice, add some item level fields
3) Place an item level hold
4) Check the email you receive ( or just look at it from the db )
You should see the item level fields are new populated
5) Place a title level hold
6) Check the email you receive - item fields are not populated,
but notice still looks ok.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependentBranches is ON, patrons are not allowed to place
hold requests on items whose owning library is different from
the patron's home library, *unless* the canreservefromotherbranches
system preference is also ON.
The patch implements the intended behavior; without it, IndependentBranches
and canreservefromotherbranches were not consulted during the
item holdability check.
To test:
[1] Have IndependentBranches ON and canreservefromotherbranches
OFF. Make sure that the circulation rules are set up to
permit patrons to place hold requests in general.
[2] In the OPAC, log in as a patron from library A, and try placing
a hold on an item from library B. The patron will be able to
place the request.
[3] Cancel the request.
[4] Apply the patch.
[5] Try placing the same hold request. This time, the request should
be forbidden.
[6] Turn on canreservefromotherbranches.
[7] Try placing the hold request. This time, it should go through.
[8] Cancel the request.
[9] Turn off IndependentBranches.
[10] Try placing the hold request and verify that it is permitted.
[10]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A change-and-replace went a tick too far. This patch
adjusts the column alias in the query run in MergeHolds()
to reflect that the value being returned is the number of
hold requests, not an ID.
To test:
[1] This patch should have no visible changes to behavior. To
verify, pick to bib records that have hold requests on them,
then merge them together. Verify that the merged bib
contains sll of the hold requests on it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* C4::Reserves::_FixPriority
- The previous code checked the cancellationdate. If think you never pass
in it with bad parameters, but in order to be sure I added the check on
this value.
- The reservedates array was never used.
* circ/circulation.tt
There was a bug: it was not possible to remove an hold from the
circulation page. Passing reserve_id fixes the issue.
* C4::Reserves::GetReserveId
This subroutine did not have a unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Keeping fetchrow close to its execute worked even better in GetReserveStatus.
Instead of returning undef, I return empty string.
I checked all calls; this value is mostly not checked for undef.
So we eliminate a lot of warnings in log.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a librarian checks out a waiting hold to a different patron
it gives the item conflicting statuses. The item will show as both
checked out to the different patron, and waiting for the original
patron.
This patch fixes this by not allowing this situation to occurr. If
a librarian attempts to issue an item that is waiting for a different
patron, the system will force the librarian to choose to
a) not issue the item
b) issue the item, and cancel the waiting hold
c) issue the item, and revert the waiting hold
In this scenario, reverting the waiting hold means to push it back
on the reserves queue as a hold with a priority of 1, which will push
the priorities of any existing holds back by 1 as well. It will become
an item level hold for the given item, as we cannot know if the hold
was item-level or bib-level given the data we have about the hold.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
All three cases tested, correct outcome each time
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The slip RESERVESLIP is not replacing fields correctly.
C4::Reserves::ReserveSlip calls C4::Letters::GetPreparedLetter,
and passes the $reserve hashref to it for each table except branches
( which is passed the branchcode ). The problem is, if you pass a
hashref for a table, it uses that hashref for the replacing, rather
than looking up the data from the database.
Fixed by passing the correct keys for each of the tables requested.
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the test plan.
Could reproduce the bug.
After applying the patch slip printed as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a flaw in C4::Members::Messaging::GetMessagingPreferences where
the system assumes that every transport will use the same letter. This
is not necessarily true. Even with the default preferences of just
'email' and 'sms', we should be able to have different letters
for each, as one has a maximum character length ( sms ) and one
does not. GetMessagingPreferences currently uses the letter code
of the last result of its query as the letter code for every transport type.
The returned data is a hashref with a key 'transport_types' that is
an array of transport_types this borrower has selected for the given
alert.
This commit modifies GetMessagingPreferences such that the the
'transport_types' array is now a hash where the name of the transport
type is now a key to the value of the letter code set for that transport
type.
It also modifies code calling GetMessagingPreferences where necessary,
and as a side benefit will correctly get the letter codes for email
and sms correctly, if they are defined differently.
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
In use in production by two libraries: Middletown and Washoe
who give their sign off but don't have git to do so.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
For request.pl, there are two ways to suspend a reserve, either
by using the 'suspend' button for an individual reserve, or by
using the 'Update hold(s)' button with suspend until dates set.
If the 'suspend' button is used, any date in the 'suspend until'
field is ignored. This commit fixes this issue.
* Add suspend_until date to suspend button link via jquery
* Add optional date to ToggleSuspend()
* Add KohaDates plugin where necessary
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
passes tests, tested:
* suspend all holds from circ.pl
* suspend one hold from circ.pl
* suspend all holds from moremember.pl
* suspend one hold from moremember.pl
--- NOTE: clicking suspend all holds without setting a date will mean the holds must be manually unsuspended. I'm not sure this is intentional?
* suspend a specific hold using the in-table button on reserves
* suspend a specific hold using the "update hold" button
500 error is gone.
http://bugs.koha-community.org/show_bug.cgi?id=8084
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
