Installer fixes :
- in kohastructure.sql, category.BlockExpiredPatronOpacActions default
value is -1, sets the same in updatedatabase.pl
- in syspref comment, replaces "opac actions such as placing a hold or
reserve" by "opac actions such as placing holds or renrw books"
- A 'YesNo' does not have 'yes' as value in database, it is '1'.
- corrects small typo "categori" and syspref name case
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Hide renewal column, buttons and links
* Fixes minor bug where upper-right table links would show even if
renewal impossible
* Cleans up some of the template formatting ( whitespace changes only )
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a patron, note the patron's category
5) Issue an item to this patron
4) Edit that category, set "Block expired patrons" to "Block"
5) Verify the patron cannot renew or place holds in the OPAC
6) Edit the category again, set "Block expired patrons" to
"Don't block"
7) Verify the patron *can* renew and place holds in the OPAC
8) Edit the category again, set "Block expired patrons" to
"Follow system preference BlockExpiredPatronOpacActions"
9) Set the system preference BlockExpiredPatronOpacActions to
"Block"
10) Verify the patron cannot renew or place holds in the OPAC
11) Set the system preference BlockExpiredPatronOpacActions to
"Don't block"
12) Verify the patron *can* renew and place holds in the OPAC
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch restores the display of the authority type summary for
MARC21, where at present the heading type (i.e., "Topical Term",
"Personal Names") come over for display in the template.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects a small bug :
Authorities search on all types does not show summary because it is computed
with selected type (which is empty) instead of using found authority type.
Test plan :
- Go to intranet autorities search
- Perform a search on all authorities types
- Look at results
=> Without this patch, results rows do not display the autority summary, only
authorized headings
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
From a biblio record, if one wants to add a 600$a information, a pop-up
appears. On this new window, on search terms typed and validated, a table
result is displayed, with a column "Get It!" allowing the selection of an
authority. From here, different cases:
1) If we have a simple authority with 200$a and 200$b subfields, a link
"choose" is displayed, working correctly.
2) If the authority has different occurences of 200$a/200$b, numeric links (1 2
and so on) are displayed, one for each occurence. In the example of my
screenshot, the line with a "Paul, Korky -- Pauline, Korkette" summary
possesses two links : "1" will add "Paul, Korky" whereas "2" will add
"Pauline, Korkette" (couldn't come up with a better name ;)).
3) If the authority has 200$x or 200$y subfields defined, several links are
also created, when it should not be the case. In our example, "Niclausse,
Paul -- Expositions" will create a link "1" for "Niclausse, Paul" and a link
"2" for "Expositions". Clicking on the 2nd link leads to the following
error: Software error: Can't call method "subfields" on an undefined value
at
/home/asaurat/workspace/versions/community/authorities/blinddetail-biblio-search.pl
line 86. Only the cases 1 and 2 should be handled. The creation of links
for subfields like 200$x or 200$y should be removed.
This problem is caused by the use of " -- " has separator of authorities with
several headings, but also in some heading between main part and subdivisions.
This patch corrects this by using an array in authorities summary so that
presentation is computed in template. I've choosen to use the pipe separator
between authorities with several headings. This may be changed to be
configurable.
Test plan :
- Edit an authority type summary : for example subject (heading on 250) :
summary "[250a][ -- 250x]"
- Create an authority A1 with one heading and a subdivision : for example a
subject : 250$a "History" 250$x "20th century"
- Create an authority A2 with several headings. for example a subject : 250$a
"History" 250$a "Legends"
- Rebuild Zebra queue
- Go to OPAC and click on "Authority search" and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Go to intranet autorities search and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Edit a record using this autorities type as thesaurus : for example on 606$a
- Click on thesaurus link and search on "History"
=> You will find A1 and A2 :
History -- 20th century ; 0 times ; choose ; Edit authority
History | Legends ; 0 times ; 1 2 ; Edit authority
- Click on link "2" to chosse "Legends"
=> You get "Legends" in heading field : for example 606$a
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the problem and the solution. I have tested the patch on a large
DB with authorities having multiples headings. There is no regression on bug
4838.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Without the patch I couldn't choose between multiple headings
in the authority plugin, but with the patch it works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The initial patch for this bug did not include a specific command line
option for customization. If a module LocalChanges.pm existed, it would
be used without asking.
This patch adds a command line option enabling the customization option
and offering the extra possibility of using another module name. If no file
name is passed, we default to LocalChanges.
Without the -custom option, behavior is as it was.
Also some POD lines are added to document the feature.
Test plan:
[1] Make a LocalChanges.pm in migration_tools. Verify that it is not used,
if you do not enable the -cust parameter.
[2] Run the script again with -cust. Verify that it is called now.
[3] Copy LocalChanges.pm to Whatever.pm. Make some change. Run with
-cust Whatever and verify that the new module is used.
[4] Copy Whatever.pm to another dir, make some change. Run with -cust and the
full name. Verify that the latest change was used.
[5] Run without any option. Check the pod documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes two adjustments:
[1] For the verbose option, verbose level 2 now means print the
formatted version of each record.
[2] If a module LocalChanges.pm is found in misc/migration_tools, the
routine "customize" in this module is called for each marc record.
This allows you to make local changes to these marc records before
importing them.
Test plan:
[1] Test the verbose option: a single -v for medium verbosity and two
-v to dump a human-readable version of the record to standard output.
(Do not yet copy LocalChanges.pm in the folder.)
You may used the attached example file on Bugzilla:
perl misc/migration_tools/bulkmarcimport.pl -file zztest01.xml -v -v -b -m XML -t | more
Note the option t for test; no records will be imported.
[2] Copy LocalChanges.pm in the migration_tools folder. You may use the
example provided on Bugzilla (in a patch). If you use the example module,
check the contents of 001, 005 and 590 fields. (The -v -v option allows
you to easily check that.)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds classes for both the facet label and count, and adds
'inline-block' to the 'facet-count' class so text shows properly.
To reproduce:
- Have facets to show some right to left text (example on the bug
report) in English language templates.
- Enable the displayFacetCount.
- Check it displays like the attached screenshot.
To test:
- Apply the patch
- Do a search that previously reproduced the problem on the staff
interface
=> Shows correctly
- Repeat for OPAC (the three themes)
=> Shows correctly
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Still work as described. Checked in Arabic with Arabic records.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Confirmed bug and that the patch fixes it, tested in staff,
prog, ccsr and bootstrap.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Display, at check in, a reminder of an already existing suspension date
even if the returned document is not late.
Test plan :
1) Apply the patch
2) Go to a borrower checkout page and checkout some documents with
different passed duedate using "Specify due date" function. Checkout out
one with the default duedate.
3) Check in the document with the bigger delay :
You will get the message : 'X is now restricted until ...'
4) Check in one of the document with a smaller delay :
You'll get a different message : 'Reminder : Patron was earlier
restricted until...'.
5) Check in the document which is not late :
You 'll get the same message as the previous one
Signed-off-by: JMBroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds an additional test case to document the behavior
that if AdvancedSearchTypes contains 'itemtypes' or /is/
'itemtypes', that it returns the same results.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch ensures that the list of desired formats for a purchase
suggestion includes the list of item types so long as the
AdvancedSearchTypes system preference includes 'itemtypes'.
--------------
-- Synopsis --
--------------
When system preference AdvancedSearchTypes has other values than 'itemtypes',
for ex 'itemtypes|loc', itemtypes selection in opac-suggestions.pl
is not populated with available itemtypes.
This patch fixes the issue by broadening the strict comparison of
($advanced_search_types eg 'itemtypes') #fails 'itemtypes|loc'
to
($advanced_search_types =~ 'itemtypes') #succeeds 'itemtypes|loc'
Unit tests included
---------------
-- Test plan --
---------------
REPLICATING THE ISSUE
1. Set system preference AdvancedSearchTypes to itemtypes|loc
2. Go to opac-suggestions.pl and observe Item type <select> dropdown list
2.1. List should have only the default value
AFTER APPLYING THIS PATCH
1. Set system preference AdvancedSearchTypes to itemtypes|loc
2. Go to opac-suggestions.pl and observe Item type <select> dropdown list
2.1. List should have itemtypes available for selection
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tests worked as expected. Placed a suggestion and saw the whole
list of item types, chose one, saved, checked staff and it loaded
as expected. Changed item type in staff and it applied in both
views.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests including new regression tests.
Restores old functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch deals with the current master code. It should be removed when
patches for bug 11944 will be pushed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No side effects.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes encoding problem, until this can be resolved properly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This gives a koha-qa error, but on another user/env not.
Really don't know
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I see the same error, but can't see where this is coming from,
code seems to work ok.
Works as described, no regressions found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
buildCGISort can be deleted.
Test plan:
git grep buildCGISort
should return no result.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more buildCGISort
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Now we can use the method plugin from the memberentry form.
Test plan:
1/ Create a patron and verify sort1 and sort2 dropdown list are
correctly generated.
2/ Select values.
3/ Save.
4/ Edit the patron and verify the selected values are displayed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On this way, dropdown list could be generated from the templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
GetAuthvalueDropbox is in C4::Budgets, this does not make sense.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the price parsing so that it can fall
back on the currency name if an ISO code is not supplied; this allows
for handling the very common situation where the currency name
as entered was already the same as the ISO code.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- use "ISO" instead of "iso"
- move hint text
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Initial bug :
When there's a round price with no decimals after it,
or when the symbol is after the digits, the price is not captured
by regular expression in MungeMarcPrice routine and the variable
is not initialized.
Enhancement :
The MungeMarcPrice routine had been widely modified.
It's still possible to priority pick the active currency but
unlike the previous mechanism that worked only for prices preceded
by the currency sign, it's now valid wherever the symbol is situated.
As symbol you may enter a pure currency sign as well as a string
including it like '$US'. Moreover, an 'isocode' column had been
added in currency table (editable in the staffo interface from
Administration/Currencies and exchange rates). So the active
currency can be picked either through its symbol or through its iso
code.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, especially t/db_dependent/MungeMarcPrice.t
Checked currencies can be added, edited and deleted.
Notes: new ISO code field is mandatory.
Sample sql files need to be updated (bug 12146)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch repairs the JavaScript that selectively removes unselected
bibs from the form submission, fixing a problem where selecting
bibs from the middle or end of the list would cause them to be ordered
without the appropriate quantities, funds, and prices.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes some warnings (not introduced by the main
patches) regarding fetching the number of bibs in a batch
and fetching the list of batches.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It is useless to copy the fund list in a new node. It seems easier to
hide/show inactive/active funds.
This patch also adds a "(inactive)" marker in the fund list for
inactive funds. If the fund located in the record is inactive, it is
displayed by default and cannot be hidden.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When adding an order from a staged file, a link
"show all funds" is now added on the top of the
page. All inactive funds are hidden by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
- Loading the page, a fund needs to be selected. Before
the patch the first fund was preselected.
- Checking the checkbox, inactive funds show up, but
are not visible otherwise.
- If the fund is selected from the MARC file, the
correct fund will be selected, even if it's inactive.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On the "Default accounting details", if a dropdown list was created for
a statistic value, on reloading the page it still exist. It should not
given the fund value is reset.
The CGIsort variable is useless and can be remove: the dropdown list
is generated using the ajax call.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ showmarc.pl takes the importid for staged files.
2/ small note to indicate that the vendor's discount will be used if no
discount is filled.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
git grep fetch_sort_dropbox
should return no result.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix unit tests (use a transaction).
- add 3 tabs on the page in order to be more understandable.
- fix a warn in logs
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
