The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects a typo that broken ModReserveFill(). This
patch also adds a unit test that (via two levels of indirection)
exercises ModReserveFill().
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the POD for C4::Reserves::_FixPriority()
to (hopefully) describe its function thoroughly. It also
adjusts the call of _FixPriority() by CancelReserve() to
omit passing reserve_id, since by that point no row in
the reserves table for that request still exists.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In various places, deleting a hold request did not trigger recalculating
the priority of the other holds on the bib:
To reproduce the bug:
- select or create 2 users U1 and U2
- select or create an holdable item
- place on hold for both U1 and U2. U1 has priority 1 and U2 has
priority 2.
- delete the hold for U1
- go on circ/circulation.pl?borrowernumber=XXXX for U2 (or in the DB
directly) and verify the priority has not been set to 1
The issue is repeatable (at least) on these 2 pages:
* circ/circulation.pl?borrowernumber=XXXX (tab 'Holds', select "yes"
in the dropdown list and submit the form)
* reserve/request.pl?biblionumber=XXXX (click on the red cross)
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran my tests:
Preparations:
- Create holds for different patrons on a record:
* 1st - title level hold
* 2nd - item level hold
* 3rd - title level hold
* 4th - title level hold
- AllowOnShelfHolds = On/Allow (items were not checked out)
Tests:
Deleted holds from various pages, confirming bugs first,
then testing with applied patches. Reloading database
after each test.
1) Cancel holds from OPAC patron account
/cgi-bin/koha/opac-user.pl#opac-user-holds
- Cancel 4th - ok, before and after applying the patch
- Cancel 2nd - ok, after applying the patch
2) Cancel hold from holds tab on staff detail page
/cgi-bin/koha/reserve/request.pl?biblionumber=7
a) Setting priority to 'del', submitting with 'Update holds'
- Cancel first (1st) - ok, before and after
- Cancel hold in the middle (was 3rd) - ok, before and after
- Cancel last (was 4th) -ok, before and after
b) Using red X
- Repeating tests from a) - before the patch is applied holds
get totally 'out of order' - after applying the patch, it works
correctly
Additional tests done on this page:
- Change priority using up, down, to top, to bottom icons
- Change priority with 'toggle to lowest'
3) Cancel hold from the patron's account
a) Check out tab - Delete? Yes, 'Cancel marked holds'
/cgi-bin/koha/circ/circulation.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
b) Details tab - Delete? yes, 'Cancel marked holds'
/cgi-bin/koha/members/moremember.pl?borrowernumber=X
- Cancel first (1st) - ok, after applying the patch
- Cancel hold in the middle (was 3rd) - ok, after applying the patch
- Cancel last (was 4th) - ok, after applying the patch
Without the patch, holds priorities get out of order.
Additional tests done:
- Check in one item to trigger first hold
- Check in one item to trigger second hold
- Check out first item
Priorities are kept while the item is waiting, when it's
checked out, priorities of remaining holds get reset correctly.
Conclusion:
Big improvement, no regressions found.
Passes all tests in t, xt and QA script.
Also: t/db_dependent/Holds.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Reserves.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where a patron could receive duplicate
hold waiting notifications. For example, this could happen if a
circ operator checked in an item more than once and confirmed the
same hold each time.
To test:
[1] Set up a test patron that received hold waiting notifications.
[2] Put an item on hold for the patron, then check the item in
and confirm the hold. Verify that a hold notification is
sent (or inspect the message_queue table).
[3] Check the item in again and confirm the hold again. A duplicate
hold notification will be generated.
[4] Apply the patch.
[5] Repeat steps 2 and 3. This time, only one notification should be
generated.
[6] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a column to indicate holds on received items, as well as adding
a new column for fund and showing the subtotals per fund above
the total subtotal.
To test:
[1] Create an order basket containing at least one title and
ensure that an item is created for that title. Close the
basket.
[2] Place a hold on the title.
[3] Receive the order. After receiving it, but before finishing
the invoice, the table of already received orders should now
have columns for the order budget and number of holds on the
title as well as lines with the subtotal per fund.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Similar to other patches from the same author
I run prove t/db_dependent/Reserves.t without errors
don't know if more tests are needed.
No koha-qa errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This fixes a regression introduced by the patch for bug
9394 -- when printing a hold slip using the 'print and confirm'
button, the slip would contain only the text 'reserve not found',
not a full hold slip.
This patch also adds a regression test.
To test:
[1] Check in an item that would fill a hold. Use the 'print
and confirm button' to confirm the hold.
[2] The printout will only contain text to the effect of
'reserve not found'.
[3] Apply the patch.
[4] Repeat step 1. This time, a full hold slip should be printed.
[5] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pass all tests, new and old, and QA script.
Verified wrong and corrected behaviour.
Note: Sometimes there will not be the message 'reserve not found'
showing up, but hold information for a different record. This happens
when there exists a reserve_id with the borrowernumber of the patron
in question in your database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CheckReserves was using the CircControl system preference to determine what
patrons an item can fill a hold for. It should be using ReservesControlBranch
instead.
Test Plan:
1) Set ReservesControlBranch to "item's home library".
2) Create an item at Library A, place holds for it for patrons at
Library B, Library C, and Library A in that order,
for pickup at the patrons home library.
3) Make sure the holds policy for Library A is set to
Hold Policy = "From home library" and
Return Policy = "Item returns home".
Make sure the holds policies for the other libraries are set to
Hold Policy = "From any library".
4) Check the item in at Library C, the hold for the patron at Library B
should pop up, even though it's in violation of the circulation rules.
Don't click the confirm button!
5) Apply this patch, and reload the page,
now the hold listed should be for the last hold,
the hold for the patron at Library A, which is correct.
This patch adds the subroutine C4::Reserves::GetReservesControlBranch as
an equivilent to C4::Circulation::_GetCircControlBranch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed POD so that arguments and explanation match (C<$item>).
Also tested opac-reserves.pl for regressions.
Passes all tests, QA script, and Reserves.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable the syspref emailLibrarianWhenHoldIsPlaced
2) Modify the HOLDPLACED notice, add some item level fields
3) Place an item level hold
4) Check the email you receive ( or just look at it from the db )
You should see the item level fields are new populated
5) Place a title level hold
6) Check the email you receive - item fields are not populated,
but notice still looks ok.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependentBranches is ON, patrons are not allowed to place
hold requests on items whose owning library is different from
the patron's home library, *unless* the canreservefromotherbranches
system preference is also ON.
The patch implements the intended behavior; without it, IndependentBranches
and canreservefromotherbranches were not consulted during the
item holdability check.
To test:
[1] Have IndependentBranches ON and canreservefromotherbranches
OFF. Make sure that the circulation rules are set up to
permit patrons to place hold requests in general.
[2] In the OPAC, log in as a patron from library A, and try placing
a hold on an item from library B. The patron will be able to
place the request.
[3] Cancel the request.
[4] Apply the patch.
[5] Try placing the same hold request. This time, the request should
be forbidden.
[6] Turn on canreservefromotherbranches.
[7] Try placing the hold request. This time, it should go through.
[8] Cancel the request.
[9] Turn off IndependentBranches.
[10] Try placing the hold request and verify that it is permitted.
[10]
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A change-and-replace went a tick too far. This patch
adjusts the column alias in the query run in MergeHolds()
to reflect that the value being returned is the number of
hold requests, not an ID.
To test:
[1] This patch should have no visible changes to behavior. To
verify, pick to bib records that have hold requests on them,
then merge them together. Verify that the merged bib
contains sll of the hold requests on it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* C4::Reserves::_FixPriority
- The previous code checked the cancellationdate. If think you never pass
in it with bad parameters, but in order to be sure I added the check on
this value.
- The reservedates array was never used.
* circ/circulation.tt
There was a bug: it was not possible to remove an hold from the
circulation page. Passing reserve_id fixes the issue.
* C4::Reserves::GetReserveId
This subroutine did not have a unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Keeping fetchrow close to its execute worked even better in GetReserveStatus.
Instead of returning undef, I return empty string.
I checked all calls; this value is mostly not checked for undef.
So we eliminate a lot of warnings in log.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a librarian checks out a waiting hold to a different patron
it gives the item conflicting statuses. The item will show as both
checked out to the different patron, and waiting for the original
patron.
This patch fixes this by not allowing this situation to occurr. If
a librarian attempts to issue an item that is waiting for a different
patron, the system will force the librarian to choose to
a) not issue the item
b) issue the item, and cancel the waiting hold
c) issue the item, and revert the waiting hold
In this scenario, reverting the waiting hold means to push it back
on the reserves queue as a hold with a priority of 1, which will push
the priorities of any existing holds back by 1 as well. It will become
an item level hold for the given item, as we cannot know if the hold
was item-level or bib-level given the data we have about the hold.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
All three cases tested, correct outcome each time
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The slip RESERVESLIP is not replacing fields correctly.
C4::Reserves::ReserveSlip calls C4::Letters::GetPreparedLetter,
and passes the $reserve hashref to it for each table except branches
( which is passed the branchcode ). The problem is, if you pass a
hashref for a table, it uses that hashref for the replacing, rather
than looking up the data from the database.
Fixed by passing the correct keys for each of the tables requested.
Signed-off-by: Marc Veron <veron@veron.ch>
Tested following the test plan.
Could reproduce the bug.
After applying the patch slip printed as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a flaw in C4::Members::Messaging::GetMessagingPreferences where
the system assumes that every transport will use the same letter. This
is not necessarily true. Even with the default preferences of just
'email' and 'sms', we should be able to have different letters
for each, as one has a maximum character length ( sms ) and one
does not. GetMessagingPreferences currently uses the letter code
of the last result of its query as the letter code for every transport type.
The returned data is a hashref with a key 'transport_types' that is
an array of transport_types this borrower has selected for the given
alert.
This commit modifies GetMessagingPreferences such that the the
'transport_types' array is now a hash where the name of the transport
type is now a key to the value of the letter code set for that transport
type.
It also modifies code calling GetMessagingPreferences where necessary,
and as a side benefit will correctly get the letter codes for email
and sms correctly, if they are defined differently.
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
In use in production by two libraries: Middletown and Washoe
who give their sign off but don't have git to do so.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
For request.pl, there are two ways to suspend a reserve, either
by using the 'suspend' button for an individual reserve, or by
using the 'Update hold(s)' button with suspend until dates set.
If the 'suspend' button is used, any date in the 'suspend until'
field is ignored. This commit fixes this issue.
* Add suspend_until date to suspend button link via jquery
* Add optional date to ToggleSuspend()
* Add KohaDates plugin where necessary
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
passes tests, tested:
* suspend all holds from circ.pl
* suspend one hold from circ.pl
* suspend all holds from moremember.pl
* suspend one hold from moremember.pl
--- NOTE: clicking suspend all holds without setting a date will mean the holds must be manually unsuspended. I'm not sure this is intentional?
* suspend a specific hold using the in-table button on reserves
* suspend a specific hold using the "update hold" button
500 error is gone.
http://bugs.koha-community.org/show_bug.cgi?id=8084
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
New function was actually returning an arrayref, so made
perldoc and function usage consistent.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds a new subroutine in C4::Items, GetItemnumbersForBiblio, which takes a
single biblionumber, and returns an array of all the corresponding itemnumbers.
This patch also replaces the usage of get_itemnumbers_of in C4::Reserves::CanBookBeReserved
with this new subroutine, as the output is more consistent with what we were
lookng for (this is what fixes the bug issue).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
Optionally delete bibliographic record when batch deleting items, if no items remain on the record.
Adds deleting of reserves to DelBiblio. Since subscriptions are deleted automatically,
it made sense for deletion of reserves to maintain the same behavior.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I like the way this works, and it does. Passes tests.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
At the moment, a reserve will be canceled if it has passed its
expiration date, even if the item is waiting or in the process
of being transferred. The situation could arise where someone
has a hold filled, but it is canceled while in transit, or before
the borrower can pick it up.
If the new syspref ExpireReservesMaxPickUpDelay is enabled,
this will cancel holds that have been waiting for longer than the
number of days specified in the syspref ReservesMaxPickupDelay.
If ExpireReservesMaxPickUpDelayCharge is set, the borrower charged the fee set therein.
Signed-off-by: Ian Walls <koha.sekjal@gmail.com>
Altered circulation.pref to include currency class and [% local_currency %] param
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
Create 4 holds on a bib, for patrons A, B, C, and D,
Check in the item to mark hold as waiting for patron A
Check out the item to patron B -> reserve for patron B should be removed
Check in the item to mark hold as waiting for patron A
Check out the item to Patron A, hold should complete normally
Check in the item to mark hold as waiting for patron C
Check out the item to patron D -> reserve for patron D should be removed.
Check in the item to mark hold as waiting for patron C
Check out the item to patron C, hold should complete normally
Check in the item -> there should be no more reserves.
We also tested:
Created 4 holds on a bib with two items, for patrons A, B, C, and D
All worked as expected.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaces call to GetMemberDetails with a call to GetMember. Much more efficient,
and since only branchcode is used, no required data is lost.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
CanBookBeReserved uses the very heavy-weight function GetItemsInfo to simply retrieve
the itemnumbers attached to a given biblio. The function get_itemnumbers_of() is much
lighter-weight and returns the required information; switching to it will reduce the overall
system resource cost of placing a hold.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
C4::Search is not used, so removing it from C4::Reserves
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
