It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently in Koha, if you choose to force a hold from the staff side that would contravened the current issuing rules, that hold will never be filled, as it is always skipped over by CheckReserves.
This patch disallows overrideing except for tooManyReserves which are the only overridden holds that will be trapped.
Test Plan:
1) Apply this patch
2) Attempt to override hold placement, only placements where the patron has too many holds already should be allowed
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We lost the ability to place multiple holds when we are searching for
patrons. The multi_holds parameter is lost and not handled correctly in
the template.
Test plan:
- Make sure you can place multiple holds for a patron you will search for
- Same for simple hold
TODO the multiple holds view should not be displayed if only 1 record
has been selected from the search result.
Signed-off-by: claude brayer <claude.brayer@cea.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes very weird behaviours introduced by
commit 0ab22e1c7c
Bug 18789: Send Koha::Patron object to the templates
The patron variable was only set when no action was defined.
This patch restores the feature the easiest way possible (less changes)
even if it is not the best one.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can be replaced easily with a
Koha::Biblioitems->search call
Test plan:
Test this on top of bug 19941 and confirm that the correct item types
are displayed
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The GetMemberAccountRecords may be a perf killer, it retrieves all the
account lines of a patron and then the related item and biblio
information.
Most of the time we only want to know how much the patron owns to the
library (sum of amountoutstanding). We already have this information in
Koha::Patron->account->balance.
This patch replaces the occurrences of this subroutine by fetching only
the information we need, either the balance, the detail, or both.
It removes the formatting done in the module, to use the TT plugin
'Price' instead.
There is a very weird and error-prone behavior/feature in
GetMemberAccountBalance (FIXME): as the accountlines.accounttype is a
varchar(5), the value of the authorised value used for the
ManInvInNoissuesCharge pref (category MANUAL_INV) is truncated to the 5
first characters. That could lead to unexpected behaviors.
On the way, this patchset also replace the GetMemberAccountBalance
subroutine, which returns the balance, the non issues charges and the
other charges. We only need to have the balance and the non issues
charges to calcul the third one.
Test plan:
Add several fees for a patron and play with HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge.
The information (biblio and item info, as well as the account line) must
be correctly displayed on the different screens: 'Fines' module, fine
slips, circulation module
Note that this patchset could introduce regression on price formatting,
but will be easy to fix using the TT plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to simplify and make uniform the code, the controller scripts send
a Koha::Patron object to the templates instead of all attributes of a patron.
That will make the code much more easier to maintain and will be less
error-prone.
The variable "patron" sent to the templates is supposed to represent the
patron the librarian is editing the detail.
In the members module and some scripts of the circulation module, the
patron's detail are sent one by one to the template. That leads to
frustration from developpers (making sure everything is passed from all
scripts) and to regression (we got tone of bugs in the last year because
of this way to do).
With this patch set it will be easy access patron's detail, passing only
1 variable from the controllers.
Test plan:
Play with the patron and circulation module and make sur the detail of
the patron you are editing/seeing info are correctly displayed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is already a HidePatronName syspref to hide patron's information
on bibliographic
record detail pages and the hold list.
Test plan:
With the HidePatronName enabled, make sure the patron's information are
hidden from
the catalogue and hold list pages. If the logged in user is not allowed
to see the
patron's info, no link and no cardnumber will be displayed
With he HidePatronName disabled, make sure the patron's information are
displayed
if the logged in user is allowed to see the patron's info.
Technical note:
This patch improves the existing patron-title.inc include file to
display patron's
information. Using it everywhere patron's details are displayed will
permit to
homogenise the way they are displayed. The file takes now a patron
object (what
should be, in the future, the only way to use it), that way we can call
the new
method on it to know if patron's information can be shown by the logged
in used.
NOTE: I am not sure this syspref makes sense anymore. Should not we
remove it?
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Check the following files that use strict; use warnings; doesn't exist
and use Modern::Perl; is written instead.
modrequest.pl
modrequest_suspendall.pl
placerequest.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset move The OPACItemHoldsAllowed logic
(issuingrules.opacitemholds) to a new class method of
Koha::IssuingRules: get_opacitemholds_policy
On the way, this patch will certainly fix the same problem as bug
19298 with onshelfholds.
Test plan:
Make sure the opacitemholds policy is correct when placing a hold at the
OPAC or the staff interface.
Followed test plan which worked as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Enable AllowHoldPolicyOverride
2) Enable AllowHoldItemTypeSelection
3) Create a situation where adding a hold for a patron would trigger a tooManyReserves
warning.
4) Note the itemtype pulldown is empty
5) Apply this patch
6) Reload the page
7) Itemtype pulldown should have values
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug caused by
commit bc39f0392b
Bug 14695 - Add ability to place multiple item holds on a given record per patron
Test Plan:
1) Set AllowHoldsOnPatronsPossessions to "Don't"
2) Check out an item to a patron
3) Place a hold on that item for the same patron
4) Note you are allowed to with no alert
5) Delete the hold
6) Apply this patch
7) Place a hold on that item for the same patron
8) Note you recieve an alert now
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can easily be replaced with
Koha::Patron->holds->count
Test plan:
- Set maxreserves=5
- Place 3 holds for a given patron
- Place again 3 holds for this patron
3+3 > 5 => The holds must not be placed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script is really ugly and need to be rewritten completely to
separate the different action.
$patron is not always defined, we need to take it into account.
Note that this patch is mainly indentation changes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Circulation::GetItemIssue returned all the issue and item
informations for a given issue. Moveover it also did some date
manipulations. Most of the time this subroutine was called, there
additional information were useless as the caller usually just needed
the basic issue's infos 'from the issue table).
This first patch updates the simple calls, ie. the ones that just need
the issue's infomations.
Test plan:
The following operations should success:
- transfer a book
- create a rule for on-site checkouts and confirm that a patron cannot
check more items out that it's defined in the rule.
- Renew an issue using ILSDI
- Using SIP confirm that you are able to see your issues
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"$itemnumbers_of_biblioitem" is declared but not used at line 314,
column 5. Unused variables clutter code and make it harder to read.
(Severity: 3)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point this subroutine is only used once, from reserve/request.pl.
Since we already have the items, it's easy to populate the different
hashes as the rest of the code is expecting it.
Test plan:
You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The code from scripts and subroutines using this subroutine was not very
elegant. Most of the time the code was unnecessarily complex.
This patch removes this subroutine and adapt the code to use
Koha::Items instead.
1. C4::Items::get_hostitemnumbers_of
I did not understand why the code was so complicated, it seems that we
only want to know if a given item has a given biblionumber
2. cataloguing/merge.pl
We want to retrieve the itemnumber for a given biblio.
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items;
3. labels/label-item-search.pl
We want to loop over the items for a given biblio, no need to use
get_itemnumbers_of and GetItemInfosOf.
We just need to use:
Koha::Items->search({ biblionumber => $biblionumber })
4. reserve/request.pl
We want to retrieve the itemnumbers of the biblio's items
We could also have done that with:
Koha::Biblios->find( $biblionumber )->items->get_column('itemnumber');
Test plan:
1.You need to create analytical record relationships (
EasyAnalyticalRecords needs to be set). Link an item to a biblio using
the 'Edit > Link to host item' menu from the biblio detail page.
From the staff interface place a hold on the biblio. You should see the
items from the biblio and the one you just linked
2. Merge two bibliographic records (with items), the resulting record
should contain items from both original records
3. Create a new label batch, edit it.
Add items to this batch ('Add items' button).
Fill the input with a barcode.
You should see all the items of a biblio.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updating to use they/them and skipping the ones changed to it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Comments throughout the Koha codebase assume that
all librarians or borrowers are male by using the
pronoun 'he' universally. This patch changes to
'he or she' / 'him or hers'.
Testing plan:
- ensuring modifying tests still pass:
+ C4/SIP/t/06patron_enable.t
+ t/db_dependent/Circulation.t
+ t/db_dependent/Koha/Patrons.t
+ t/db_dependent/Reserves.t
Sponsored-By: California College of the Arts
No code changes detected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On the same way of Koha::Biblio->get_holds,
Koha::Biblio->get_holds_placed_before_today and Koha::Patron->get_holds,
this new subroutin will permit to retrieve the holds placed on a
specific item.
Note that at the moment we do not need a Koha::Item->get_holds method:
we do not want to display future holds placed in the future.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is more a bugfix than a refactoring.
Indeed the C4::Koha::get_notforloan_label_of behaviors were buggy:
1/ It does not display the opac description at the OPAC, but always the
staff description
2/ It does not care of the framework of the biblio, but retrieve the
first row of the marc_subfield_structure mapped with items.notforloan
These 2 bugs can easily be fixed using the
Koha::AuthorisedValues->search_by_koha_field
Steps to recreate the issues:
- Create 2 authorised value categories for not for loan (NFL1 and NFL2)
with the same values. Define a different description for the OPAC.
- Define link 952$7 to NFL1 for the default framework and to NFL2 for
the BK framework
- Create 2 bibliographic records (B1 using NFL1 and B2 using NFL2) with
2 items each (1 item should have a not for loan value)
- Go to the "Place a hold" view for this record.
- In the item list, you should see the not for loan value
=> The staff description of NFL1 will always be used, even for the OPAC
Test plan:
- Recreate the issues without this patchset
- Apply this patchset
- Recreate the steps to recreate the issues
=> The staff description of NFL2 should be displayed for the B2 item
=> The opac description of NFL2 should be displayed for the B2 item at
the OPAC
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Members::GetHideLostItemsPreference can easily be
replaced with Koha::Patron->find(42)->category->hidelostitems
Test plan:
Create 2 patron categories, 1 with "Lost items in staff client" set to
"shown" and another one to "Hidden by default"
Create 2 patrons using them
On the result search page, the detail page of a record, the item list
page and the page to place a hold, make sure the lost items are
shown/hidden as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This fix the following bug:
If you select 2 in "Holds to place (count)" and finally
check an item, so you get 2 holds for the same item.
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Test plan:
Hit
/cgi-bin/koha/reserve/request.pl?biblionumber=1"><script type="text/javascript">alert("XSS")</script>
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is not used since bug 11703
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
