Patch removes the 'isUrl' attribute from all 240$a fields in the various
frameworks. The change removes the broken link from the staff detail
MARC tab view.
Changes are a little easier to spot with: git diff --color-words HEAD^
To test:
- Load some or all of the frameworks
- Verify that 240$a is no longer marked as being an URL
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
942$e is mapped to biblioitems.cn_edition, which doesn't exist and
to an authorized value CN_EDITION, which doesn't exist either.
Patch removes the wrong mapping and non-existing auth value from
the frameworks.
To test:
- git diff --color-words HEAD^ is helpful
- Check all mappings are changed and SQL is still valid
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Adds translations for new permissions
- Adds ISO code to the sample currencies
- Removes a comment line about branchrelations from
sample_libraries (en)
To test:
- Run the German web installer with all sample data
selected
- Verify it runs without problems
- If you speak German - verify the translations make sense
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
No errors from the web installer. I verified that all the changes I saw
in the diff appeared correctly in the permissions. Currencies all
appeared to be correct after installation. Translations appeared to be
very German-looking.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The feed message transport type exists but nobody knows how it can be
used. This patch assumes nobody uses it and removes it.
Before removing the entry in the DB, the updatedb entry will check if no
foreign key exists in order to avoid a delete in cascade.
This path does *not* deletes the occurrences in the templates.
Test plan:
Apply this patch, execute the updatedb script and verify the
message_transport_types table does not contain the 'feed' entry if it was not
in use.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch will remove the confusing option to configure message texts for feeds.
Checked on a database with an existing feed type notice (not deleted) and
on one without any references to the feed message transport type (deleted!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Updates the en permission file and adds a database
update to fix the permisson.
The update is done using the description, to not
untranslate non-English permission descriptions.
To test:
- Run the database update on your existing installation
and check the typo is gone
- Run the web installer and check there are no errors
and permissions are loaded correctly (and without typos)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates MARC21 frameworks to Update No. 18 (April 2014)
Also updates values on database for MARC21 installs.
To test
1. Apply the patch
2. Run updatedatbase.pl, check that runs without error
3. Remove default framework, load again. Check that loads without
error.
4. Verify changes
Bibs
007/04 Sound recording -> q Quadraphonic, multichannel, or surround
347f -> Encoded bitrate
110/1,610/1,710/1,810/1 subfield c -> repeatable
Auth
110/1,410/1,510/1,710/1 subfield c -> repeatable
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Checked changes are according to documentation from LOC and
consistent between sample files and updatedatabase.pl.
No problems found, all English frameworks were updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add LOC SRU server to sample servers installed.
This patch modifies four language files: de, en, es and nb.
For the other languages this may not be useful.
Test plan:
You could test this by using the webinstaller.
But you could also (backup) and delete your records in z3950servers, and
run the sample_z3950_servers.sql file from the command line.
Check if you see the new SRU server.
Tested using mysql. I truncated the table (to reset the IDs as well) and then ran the file. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames name to servername and type to servertype.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all sql files by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Corrects the German translation for 'Laotisch'
- Adds an icon to the reference item type
- Corrects capitalization for user permissions
To test:
- Run English web installer, make sure to select
the sample item types and all mandatory data
- Check user permissions appear correctly
- Check icon for REF itemtype is shown correctly
- Check that languages in Advanced Search appear
as normal
- Install German and check in language list on
advanced search 'Laotisch' now appears
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well following test plan.
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch converts the HOLD_PRINT notice to a HOLD notice
with a message transport type of 'print'.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds notices SHARE_INVITE and SHARE_ACCEPT in updatedatabase and
sample_notices.
Test plan:
Install or upgrade and verify that you have the new notice under Tools.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some files had truncate. Some files had foreign key checks.
Other files had foreign key checks disabled. Some files gave
the column names expressly, and others assumed the fields in
a particular order. Everything was modified to:
- not truncate
- not say utf8 (because it should already be by default)
- not disable foreign key checks (because it should work)
- expressly name the fields (adding fields shouldn't break it)
TEST PLAN
---------
0) Backup opac_news if you care about your news.
1) open mysql client
2) use the koha database
3) Run the following script
TRUNCATE opac_news;
source ~/kohaclone/installer/data/mysql/uk-UA/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/it-IT/necessari/sample_news.sql
source ~/kohaclone/installer/data/mysql/de-DE/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/sample_news.sql
source ~/kohaclone/installer/data/mysql/en/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/pl-PL/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/es-ES/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/ru-RU/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/fr-FR/2-Optionel/sample_news.sql
- Were there errors?
- Did everything add nicely?
- Not likely, by expressly stating the idnew field, the news
items in some files would not be added.
4) apply patch
5) try running the script again
- Were there errors?
- Did everything add nicely?
6) Log into the staff client
7) Tools->News
- Do you see the news items added?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much needed clean up, making for much more robust and less error prone
sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch offers a better default for currencies,
with USA dollar as default active currency.
To test the patch:
1)Install master without the patch, during web installation
select 'parameters.sql' file
2)Finish install and go to Administration -Currencies & Exchange rates
3)No active currency
4)Install master with this patch, during web installation
select 'parameters.sql' file
5)Finish install and go to Administration -Currencies & Exchange rates
6)Now USA dollar is the active currency
NOTE: This does solve the problem of everything being NULL for active,
and lacking an active value. It also corrects the description
of the optional item to check related to currencies.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fix Armenian language description
To test:
1) Do a fake translation to Armenian,
mkdir koha-tmpl/intranet-tmpl/prog/hy-Armn
2) Go to Administration > System preferences > I18N/L10N
3) Armenian description looks like the second string in Bug description
4) Apply the patch
5) Run updatedatabase.pl
6) Reload page, now description look as first string in
Bug description (it's the sixth letter, similar to 't')
Ammended patch, wrong column.
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the English sample file for translations and includes
a database update to correct the string in existing installations.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
At present, the QueryParser search mode expects that search field names
and aliases are case-sensitive. This may change (see bug 11353), but
for now, this patch ensures that the local-number searches used by
the KohaBiblio rule will work regardless of the value of the
UseQueryParser system preference.
To test:
[1] Use the KohaBiblio 999$c matching rule with UseQueryParser both
on and off. Verify that matching by biblionumber works correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a default record matching rule for biblionumber
using the 999$c and the Local-Number index.
This is part of the optional marc21 SQL, as well as in the
updatabase.pl script.
TEST PLAN
---------
1) Apply the SQL for adding the KohaBiblio matching rule.
2) Run updatedatabase.pl
3) Export some MARC bibliographic records from Koha
4) Import those same MARC bibliographic records using the
"KohaBiblio" record matching rule.
5) The incoming records should match perfectly
6) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
Optional: install a new Koha MARC21 database from scratch and
ensure that the sample matching rules are loaded. Add at
least one bib record, and try steps 1-6.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Dropped the database update from the original patch, as the matching
rules are not at present mandatory during installation.
This patch updates default EN UNIMARC bibliographic framework
I used the 2008 version of the UNIMARC bibliographic manual,
and added updates listed on official site.
There are new fields/subfields, those added are hidden by
default.
There are some description changes, and also a lot of
changes to repeatable and mandatory values.
To test:
a) Functional
1) Remove all bibliographic frameworks
2) Load new file unimarc_framework_DEFAULT.sql
3) Check that it load without errors
b) Correctness
1) Take a time and verify that all new
fields/subfileds are correct
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Huge patch, lots of additions and corrections.
To view the changes git diff --color-words HEAD^ is helpful.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixes one missing for 951 field description in the Default framework.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to make MARC21 bibliographic frameworks
internally consistent. It modifies field/subfield descriptions
of simple_bib and fastadd frameworks to match corresponding
ones of default framework.
To test:
1) Download and edit the attached script, check-diff.sh
Put on it user, pass and database name of your dev install
Copy the script on your git home
2) Run the script (bash check-diff.sh).
WARNING: the script removes bibliographic frameworks, and load
default, simple_bib and fastadd ones.
It will show on screen, and write on file differences.txt,
any difference on field/subfield description (liblibrarian)
between any framework and default
On master it will show a lot of lines
3) Apply the patch
4) Run the script again. Frameworks files must load without problem.
There will be no differences
NOTE: There are many "space" changes. The reason
to that is to format files to ease the translation process.
Not related with this bug, but necessary.
Also a few changes on default framework.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I ran some tests and found one more case where the
liblibrarian and libopac columns had slightly different
descriptions, adding a follow-up for that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Part of the patch for bug 11260 had the effect of undoing
commit 5aae737, thereby adding back two undesirable things:
- use of backticks in the SQL
- setting z3950servers.id explicitly
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In connection to bug 4246, commit 591bae324 added
phone to the message_transport_types table in updatedatabase.pl
This should be done also for new installs via the .sql files of the web
installer.
I am adding it only to English now, basing this change upon the work in
reports 10509 and 10520. (I discovered this tiny omission there too.)
Test plan:
Apply patches 10509/10520.
Run new install or run this particular sql file from command line.
Note: If you only run this particular file, you do not need patch 10509.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: David Noe <drnoe@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes permission description in en and untranslated
installer files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- adjust description of the default profile
- adjust description of the sample data SQL
- adjust description of the download link
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Create a CSV profile (or use the default one) with a type 'sql'.
- Go to serials/claims.pl, select the wanted CSV profile and click on
the "Export selected items data".
- Verify the CSV file is correctly generated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
On top of 10853 (solving merge conflict)
Need to do homework to test. Add subscription and serial claim
notice.
1) Create a new CSV profile, type SQL, copy sample fields
2) Go to claims, select vendor
3) Go to Export selected items with created profile
4) CSV (in my case I use | as separator) download successfully
5) All fields present, file correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as advertised, keeps existing format by porting it to
a SQL profile.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The LC NAF and SAF authority Z39.50 database are indeed production
services, so we may as well showcase the new authority Z39.50 search
functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10513 added two columns to table itemtypes,
but sample_itemtypes can't be loaded because
it relies on old structure.
This patch rewrites sample_itemtypes.sql, stating
explicitly columns, removing backticks and consolidates
all in one insertion.
To test:
1) On master with current DB structure, delete item types
2) try loading sample_itemtyes.sql
It fails with "ERROR 1136 (21S01) at line 1: Column count doesn't match value count at row 1"
3) apply patch
4) try again, this time it will load and itemtypes created
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only.
Tested by running the web installer on an empty database.
All sample data loads without errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch deletes information for default
MARC21 auth framework on tags 68a and 68b.
Also added update for current installs.
RM note: The 68a and 68b fields were defined in an attempt to include
both MARC21 classification and MARC21 authority records in the same
default framework, but I don't think this has turned out to be useful,
as to my knowledge nobody tries to use MARC21 classification records
in Koha, and if one were to want to, a distinct record type (or at
least auth_type) would be a better way to do it.
To test with current authorities_normal_marc21.sql loaded
1) apply the patch
2) run updatedatabase
3) check on database that there are no more
references to tags 68a and 68b
To test for new installs
1) remove auth frameworks
2) load authorities_normal_marc21.sql
3) check that load without problem
4) check on database that there are no more
references to tags 68a and 68b
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.
Test plan:
Run the file or do a new install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.
To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of inserting followed by deleting, this patch combines the two where
clauses of both sql statements, meanwhile leaving the separation intact.
As suggested by Galen, removed all 162's from the non-default types.
The 162 calls for a new authority type. We can add that later on.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran this .sql script after deleting all auth records.
The former version had 9 types, 1148 tags and 11621 subfields.
This one has 9 types, 1140 tags and 11597 subfields.
That is expected: 8 tags 162 less and 8x3 subfields less.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As proposed by the report creator, this patch
rewites authorities_normal_marc21.sql
using default authority framework to build all
current authtypes, then deleting irrelevant tags.
It also updates default authority framework
to last update (April 2013) adding new or
updated tags/subtags.
All new tags/subtags from Bug 9826 and this
one are included in all authtypes.
Deleted tags reflect current situation except
for 7XX tags thatl must be present for all authtypes.
Only for new installs
To test:
1) Apply patch
2) Delete all authtypes
exec in database
delete from auth_types;
delete from auth_tag_structure;
delete from auth_subfield_structure;
3) Insert new auth framework
4) Verify absent tags. This can be done running
select tagfield as from auth_tag_structure
where authtypecode ='' and tagfield not in
(select tagfield from auth_tag_structure
where authtypecode = 'AUTH_TYPE')
for each authtype ( UNIF_TITLE, TOPIC_TERM, etc.)
The attached PDF could be used as a reference,
all that is white or green for each authtype must be
in the list (except for white 7XX tags)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An insert statement should contain the column names to avoid confusion and
future problems with table definition changes.
This patch updates the English userflags.sql.
Will send updates for the other languages in connection with replacing inserts
by updates for the additional languages (where possible). For userflags this
will be possible.
Test plan:
Do an install (English).
Or -- as a dangerous(!) alternative--:
Do this ONLY on a restorable database.
Delete all records in userflags. (Note: This cascades to permissions a.o.)
Run this file from command line.
Check if you have records again in userflags. (You also messed up your Koha.)
Restore your database.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested both ways myself :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Tested using second alternative
Just a note: if you update other lang files replacing INSERTs for UPDATEs
then you must install using EN and later apply lang files by hand.
If you do a translate first before webinstaller, and finish your install
in your lang, then that kind of file will fail.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
mysql> create database test;
Query OK, 1 row affected (0.00 sec)
% mysql -u koha -p test < installer/data/mysql/kohastructure.sql
% mysql -u koha -p test < installer/data/mysql/en/mandatory/userflags.sql
mysql> select count(*) from userflags;
+----------+
| count(*) |
+----------+
| 19 |
+----------+
1 row in set (0.00 sec)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)
Missing tags and corresponding subtags only added to
default authority framework.
For present authtypes only missing subtags are added.
Also updates a few legends to match those from LOC.
No deletions except for a few not relevant tags in
present authtypes without subfields.
Only to new installs.
To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Sorry, this followup fulfills K. Fischer request to
base de-DE file in english one.
The differences are small corrections and added languages.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simply add catalan language.
No translation yet, so can't be really tested.
But it will come soon.
Until then, to test:
1) cp misc/translator/po/es-ES* to ca-ES*
2) do perl translate install ca-ES,
3) apply the patch
4) run updatedatabase.pl
5) enable language and display on system preferences.
6) check labels
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to current master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds missing subfields on MARC fields
029abct
(http://www.oclc.org/bibformats/en/0xx/029.shtm)
863abcdefghijklmnopqstvwxz68 (same for 864/5)
(http://www.loc.gov/marc/holdings/hd863865.html)
To test:
1) dev master system with default and example MARC21 frameworks
2) Go to Home > Administration > MARC frameworks
3) Click on 'MARC structure' of any framework
4) Search for tag 029 (or 863/4/5)
5) Click 'Subfields', there are none.
6) Apply the patch
7) Replace old frameworks, easiest by command line:
mysql -uuser -ppass kohadb -e 'delete from biblio_framework; delete from marc_tag_structure; delete from marc_subfield_structure'
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
8) Repeat steps 2-4
9) Click 'Subfields', now they are.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated frameworks are ok.
Note: Only en frameworks are updated, so if other languages need
those fields too, we need some followups.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
first, replicate:
go to More -> permissions on any user. Notice that it says various things "privileges, flags, permissions" they are interchangeable and inconsistent.
also note that some of the permissions are nonsensical and/or not descriptive enough, or not using canonical terminology (borrowers instead of patrons, for example)
To test:
interface consistency changes
-> means "turns into"
- page title - privileges -> permissions
- breadcrumbs - privileges -> permissions
- headings - privileges -> permissions
- "set flags" button -> save
Permissions that have changed description:
- Catalogue changes to "Required for staff login" in bold (this was the original impetus for this boatload of changes)
- reports
- editauthorities
- management
- serials
- updatecharges
- circulate
- parameters
- borrowers
- tools
- staffaccess
- edit_patrons (only on updatedb, not on new db)
- Read through and make sure there are no typos, and that the descriptions seem to jive with what privileges the permission gives the user. Suggestions are, in fact, welcome.
- If you are feeling ambitious, go ahead and create a new, clean database and check the wording there as well - it should match what has been done in the db update.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested both with existing database and new database
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Tested with existing database. Introduces no new mysql-isms.
Kudos for adding that syspref in bold, that got me when I first started with Koha
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the seed data from the target list at
http://www.loc.gov/z3950/lcserver.html#addr.
Comment: new target works. updated deleting and reloading
sample targets.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
I agree with Galen that this may need to be incorproated as a follow-up
for current installations. Works fine for new installs
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fix two different errors that prevented sample notices
from being loaded into a fresh English Koha database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Hugh Davenport <hugh@davenport.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
English sample_notices.sql installs correctly after this
patch is applied. Web installer completes without any errors.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
Option 1) Run the English and German web installer and check authorised values
have been added correctly.
Option 2) Run SQL code from auth_val.sql for German and English against your
database and check the authorised values have been added correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In table language_descriptions a lot of translations are missing (with the exception of French)
Additions need to be added to subtag_registry.sql (for new installs) and to updatedatabase.pl (for upgrading).
This Bug could be used as 'omnibus' for follow ups for other languages.
This patch adds German (and some missing French) translations.
Tested updatedatabase.pl
Would appreciate if somebody could test subtag_registry.sql.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, the updatedatabase and the sql file. Works well.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected some information about the provided sample data and corrected
text files to obey capitalization rules.
To test:
I suggest taking a look at the patch file and also taking a look at the
English web installer, checking if it works, if there are typos or wrong
information.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Broken Z39.50 targets were removed with patch for bug 3782, but are still
mentioned in the text files.
This patch corrects that mistake.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removes NYPL and NYU from the list of sample z39.50 servers, because
they don't work or only work inconsistently.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Right now if you were to link a field in an authority to a thesaurus, it
would not work properly. The authority type frameworks require some
adjustments to allow see also headings to be linked to thesauri (such as
adding subfield $9).
This patch adds subfield $9 and thesaurus links to existing installs
for those 5xx fields (under MARC21 and NORMARC only) which do not yet
have any subfield $9 or thesauri configured, as well as adding that to
new English language installs. There will be a follow-up patch adding
the subfields to new non-English language install files later, once
it is clear that the changes proposed and demonstrated in the English
files are accepable to the community.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested frameworks install cleanly on a new installation.
Tested database update and made sure, that configuration and subfields
of a field were not changed if
- a $9 subfield already existed for a 5xx field
- a $9 subfield and a link to another thesaurus in $a existed
- no $9 but a link to another thesaurus in $a existed
This seems safe to me.
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes the '0' values without description from the sample date for
authorised values.
To test:
1) Verify that SQL files load correctly
- truncate authorised_values; /* empty authorised values table */
- load sample data using one of the SQL files
2) Check cataloging interface - all status fields should only show 1 empty line
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
Database update
- existing mapping
- no pre existing mapping
Frameworks
PROBLEM: some languages are still missing, I think only untranslated
frameworks are included in this patch.
Acquisition
- created a new order with edition filled out
- checked edition was saved to the correct field in cataloguing
- modified edition and checked display in acquisition
- edition also displays on basket summary page
http://bugs.koha-community.org/show_bug.cgi?id=7280
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
August 10,2011: Tested install and upgrade.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
January 28, 2012: Removed untranslated non-en SQL relator term files.
Fixes sample data. All patrons should always have an expiry date.
To test:
Load sample patron data and check that all patrons have an expiry date.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A frequently-requested feature for Koha, especially by special libraries, is
the ability to upload local cover images into Koha.
This patch adds a bibliocoverimage table, and image handling code in the
C4::Images module. Key features of the implementation include:
1. The ability to have multiple cover images for a biblio
2. Handling for "full size" (800x600) and thumbnail-size (200x140) images
3. Uploading images directly from the record view
The image display functionality by Koustubha Kale of Anant Corporation will
follow in a second patch.
Special thanks to Koustubha Kale and Anant Corporation for the initial
implementation of local cover images, and to Chris Nighswonger of Foundation
Bible College for his prior work on patron images.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Will add comments on Bugzilla.
Patch failed to apply because installer/data/mysql/sysprefs.sql had changed in master.
Corrected the same with this new patch.
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The original patch for 5533 removed the Lost status from the edit items screen; new items were not affected,
and batch changes could still be made, so this was not a consistent change.
This patch removes the filter that hid the Lost status dropdown, but then changes the default MARC framework
to hide this field by default (value -5). New installations will not see this status in the editor, unless
they manually activate it. This will enforce the semantics of using the "mark lost" options by default, but
provide a workaround for libraries that understand and accept the consequences of manually editing this field.
To test:
1. on an existing install, edit an item. you should have the Lost status visible
2. on a new install, editing or creating an item should not show the Lost status at all
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the field definition to
- it-IT (default and sample frameworks)
- de-DE, en, fr-FR, pl-PL (sample frameworks)
I am not sure about the database update. If we want to do that, it should perhaps update all frameworks and languages.
At the moment only en and de-DE default frameworks are updated.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds MARC21 field 545 to the English, French, German, and Polish MARC21
frameworks. The labels for the field still need to be translated into
French and Polish.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sending messages will not work correctly without correct data in sample_notice_message_transports
and sample_notice_message_attributes tables. There is no way to configure those tables in Koha.
SQL files should be in the mandatory part of the web installer.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 6537 - Move installer/data/mysql/en/mandatory/sysprefs.sql to installer/data/mysql/sysprefs.sql
Bug 6537 - Make the web installer use installer/data/mysql/sysprefs.sql
Bug 6537 - New syspref files with only the prefs that differ from the default
I have mostly deleted old syspref files and created new ones, with a new name,
mainly in order to reduce the risk of merge conflicts if the old syspref files
are changed before this patch is pushed, if it is pushed.
See http://wiki.koha-community.org/wiki/Simplified_syspref_handling_RFC for
a description of how the new files were created to reflect sysprefs that
differ from the global default.
.txt files have been moved to reflect the new names of the SQL files they are
associated with.
Bug 6537 - Remove syspref-related tests in xt/
As far as I can see, the previous patches for this bug makes the syspref tests
obsolete, and this patch removes them:
xt/syspref.t
xt/check_sysprefs.t
Bug 6537 - Fix a problem in French syspref file
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Installs syspref MARCAuthorityControlField008.
Rebased June 1, 2011 for master.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Follow up patch for installing pref BasketConfirmations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
This new system preference (in OPAC Features) allows libraries to
turn off reviewer photos entirely if they want to. The default is
for these photos to be shown.
Note that this setting is linked to ShowReviewer in that both of
them need to be turned ON for the avatars to be displayed.
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Syspref allows the user to chose between the
Items home branch
Patrons home branch
Branch the item was checked out from
NULL
or OPACRenew
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The sample bib label layouts and the hard-coded default
format_string for new layouts used 'callnumber' when they
should have used 'itemcallnumber', preventing call numbers
from being printed on spine labels that use the system-supplied
layouts. Besides correcting the sample data, this patch
now also enshrines 'callnumber' as an alias for 'itemcallnumber'.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
After applying patch it works for new and old layouts (itemcallnumber and callnumber).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Was being set to an invalid value ';'
resulting in weird behaviour where it looked set but was not
in practice
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fix JS error in /koha-tmpl/opac-tmpl/prog/en/modules/opac-user.tmpl
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previous code would only allow for an auxiliary stylesheet on the same server. This checks for
http in the opaccolorstylesheet syspref. If it's found, sets a different variable pointing to the
remote server location. If not found, retains the previous css directory path.
Also modifies the description of opaccolorstylesheet in the installer files to reflect current
usage as an auxiliary stylesheet.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds 953$i 'Inventory number' to the frameworks.
952$i inventory number is not repeatable, not mandatory and mapped to items.stocknumber.
In a later patch a search index will be added to make inventory number/stocknumber searchable.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the ability to specify a field with alternate holdings
information for display when a biblio has no items associated with it.
Two sysprefs are added:
* AlternateHoldingsField specifies what field/subfields contain the alternate
holdings information. When blank, the alternate holdings information is not
displayed. The default is blank, as this is a new feature.
* AlternateHoldingsSeparator specifies the string to be used to separate
multiple subfields in the alternate holdings display. The default is ' '.
Example use case:
A library which does not have a 1-1 relationship between uncontrolled 852 fields
from a legacy system and actual physical items on the shelf wishes to display
holdings information from the 852, but does not want to create item records
which are almost certain to be inaccurate. By enabling the alternate holdings
feature (AlternateHoldingsField = '852abcdhi' and AlternateHoldingsSeparator =
' -- '), the library is able to gradually add item records as they locate the
physical items, without losing the holdings information presently stored in the
uncontrolled 852 fields.
To test:
1) Set AlternateHoldingsField to '852abcdhi'
2) Set AlternateHoldingsSeparator to ' -- '
3) Change the hidden value of subfields 'a', 'b', 'c', 'd', 'h', and/or 'i' of
field 852 to 0 so that they display
4) Create a record which has data in the 852, but no item record
5) Look at holdings tab, where the data you entered should be displayed
Proof-of-concept initially developed for the American Numismatic Society.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will work similar to 'Show volumes' links from traced series records and
set records. A link to search for analytics linked to serials.
A new syspref will be added: UseControlNumber.
This syspref will make it possible to determine, if $w and Controlnumber are
used for linking of records in bibliographic records.
If syspref is OFF (default), the search links will not use control numbers
but keywords.
If syspref is ON links will be built using Control-number and rcn index.
NOTE: 773$a is added to index Host-item. For testing on a dev installation:
copy record.abs to your koha-dev folder and reindex!
Rebased against 3.03.00.035 and a small typo fixed by Jared Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref ShowReviewer.
If ON (default) the reviewer/author of an OPAC comment will show.
If OFF the reviewer's name will be hidden.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Enables the library to choose whether to have patrons scan their barcodes for self checkout, or login
with username and password. Uses 'checkpw' for compatibility with LDAP authentication.
Also introduces a few new system preferences to make Self Checkout more secure and manageable:
SelfCheckTimeOut: the number of seconds before the self-checkout login times out for a patron
AllowSelfCheckReturns: indicate whether or not patrons can return materials via self-checkout
SelfCheckHelpMessage: user-configurable HTML to show specific text on the Help page.
Thank you to Marlboro College in Marlboro, VT for sponsoring and testing this development!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Add an option to the OPAC to display the URI that is stored in the 856u field
as an image instead of a text link. This would be implemented in the OPAC XSLT
style sheets for the Results and Details pages, and would require that the
corresponding OPAC XSLT option be set.
This enhancement is designed to enable the staff to catalog images, then have
them appear on the resulting pages in the OPAC when searching. Clicking on the
image would open it full size. If the image option is in use, then the default
link text would be disabled. Custom text would still appear if entered in the
"URLLinkText" option.
Add system preference "Display856uAsImage" with options of Results page,
Details page, Both Results and Details pages, Neither Results or Details page.
Notes for documentation manager:
There are two system preferences added for this enhancement:
OPACDisplay856uAsImage and Display856uAsImage. These appear on the OPAC and
Staff Client screens under the System Preferences.
The preference can be set to one of four options:
Both Details and Results pages
Details page only
Neither Details or Results pages
Results page only
In addition to this option being set, the corresponding XSLT option must be
turned on. Also, the corresponding 856q field must have a valid MIME image
extension (e.g., "jpg") or MIME image type (i.e. starting with "image/"), or the
generic indicator "img" entered in the field.
As of 14 March 2011 the UNIMARC xslt display files also require a "0" in the
second indicator location of the 856u field for the links to be activated. This
is not true for the MARC21 display files.
When all of the requirements are met, an image file will be displayed instead of
the standard link text. Clicking on the image will open it in the same way as
clicking on the link text.
Rebased and three original patches squashed into one on 30 March 2011 by Jared
Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Doug Dearden <dearden@sarsf.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a new system preference, COinSinOPACResults, which toggles the inclusion of
COiNS/OpenURL/Z39.88 in the search results display. Default is 'on', continuing
the current behaviour.
Disabling this feature will result in a significant increase in search speed, since
each call to GetCOinSBiblio requires a separate parsing of the MARC record, and there are
<OPACnumSearchResults> calls to this routine with each search.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch contains only the install stuff. (Functionality in previous patch.)
Rebased on March 28.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When XSLT is enabled, the subject tracings on the details view (both OPAC and
Intranet) previously only searched on the subfield 'a'. In addition, searches
failed when the tracing included parentheses, and the XSLT display did not
include subfields other than abcdvxyz, even for those 6xx tags that have other
subfields.
This patch adds a syspref: TraceSubjectSubdivisons. When
TraceSubjectSubdivisions is set to "Don't include" (default), the subject
tracings in the XSLT details view will only search on subfield 'a'. When
TraceSubjectSubdivisions is set to "Include", the subject tracings will search
on all subfields, not just subfield 'a'.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref FineNotifyAtCheckin.
With syspref ON there will be a message when checking in books from
a patron with outstanding fines.
With syspref OFF (default) no message will be shown.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs:
OpacFavicon
IntranetFavicon
The two sysprefs take full URLs to an alternate favicon.ico file for the OPAC
and Staff Client, respectively. Leaving them blank will use the favicon.ico file
that is included with Koha.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On OPAC/staff result page facets are truncated to 20 characters. On some OPAC
layout, it's not enough. A new syspref FacetLabelTruncationLength defines the
length to cut facets if necessary.
This patch add the syspref to searching.pref and add it to syspref various
language default values loaded into DB during installation process. It's not
necessary to update DB since length is fixed to 20 (as before) when this
syspref isn't defined in systemprefercences table.
Rebased to last HEAD: 2011.03.18
[Documentation] FacetLabelTruncationLength syspref in Searching tab
[3.2] It doesn't apply.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds prefs for facets in sql install files and updatedatabase script.
Rebased on March 17.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the syspref TraceCompleteSubfields. When TraceCompleteSubfields
is set to "force," clicking on links in non-authority controlled subject
tracings will only find other records where the entire subfields match. Leaving
it at "don't force" keeps the current behavior of doing a keyword search of the
subject indexes.
This patch implements complete-subfield subject tracings in MARC21 XSLTs (OPAC
and Staff) and all Normal mode interfaces. UNIMARC XSLTs have not been updated.
This patch also adds the syspref UseAuthoritiesForTracings. When set to "Do not"
tracings in the XSLT detail displays will never generate links using authority
numbers, but rather use the heading strings (NB: the tracings currently use only
subfield 'a' for generating links).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jane Wagner <jwagner@ptfs.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* add the AuthoritiesLog system preference to all
language installer SQL scripts
* options for a 'YesNo' should be '', not '0'
* fix wording glitch on preferences page
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs to allow libraries more fine-grained control over
when fines can and can't be overridden. The two sysprefs are:
* AllFinesNeedOverride - when this syspref is set to "Require" (default) any
fine will require a staffmember to override the fine in order to check out a
book. When set to "Don't require," fines below noissuescharge will not need
any override.
* AllowFineOverride - when this syspref is set to "Allow," staff will be able to
override fines that are above noissuescharge. When set to "Don't allow"
(default), staff will not be able to check out items to patrons with fines
greater than noissuescharge.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
solve comment 10 from nengard: This patch added these types only on upgrade. We need them to be added to new
installs to.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reimplements Paul Poulain's original OPAC Privacy patch, with some minor improvements and changes to wording
If the library enables the OPACPrivacy system preference along with the opacreadinghistory preference, and sets
an AnonymousPatron (must be a valid patron number in the database), the user will see a new tab upon login to
the OPAC, My Privacy. From there, the user can:
- Set their OPAC Privacy to one of three values
0 - Forever. This keeps their reading history unless they explicitly delete it; the bulk anonymiser won't touch it
1 - Default. Keep reading history until either they delete it or the library does
2 - Never. Instantly anonymises reading history upon item return
- Instantly delete their reading history
There is a warning and a popup to confirm. I've removed Paul's extra confirm checkbox, which seemed redundant
A note of which preference the patron has selected is added to the Patorn Details page in the staff client. This is read-only.
This patch also consolidates Privacy system preferences into the Privacy section of the OPAC tab.
Thank you to BibLibre for the original implmentation of this patch, and Los Gatos Public Library for funding and
testing the reimplementation.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds subfield 9 to DEFAULT MARC21 frameworks for the following fields:
648, 654, 655, 656, 657, 658, 662
Based on entry for 650$9 (values otherwise all the same). This patch does NOT handle non-DEFAULT frameworks
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds three system preferences: ShelfBrowserUsesLocation,
ShelfBrowserUsesHomeBranch, and ShelfBrowserUsesCcode. These can be
toggled to determine whether the shelf browser will ensure that the
items being show will match against location, homebranch, or collection
code, respectively.
Note that this also involves a bit of a refactor to clean up the shelf
browser code.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reinstates the deleted maxItemsInSearchResults system preference, which was erroneously thought to no longer be utilized.
It's removal has led to bug 4430
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Per the bug, the color.css file is blank and so this preference
should have no value by default. This patch only fixes this for
new installs. There is no way to know if people have added values
to the color.css file in existing installs, so removing that value
in those cases might break things.
This patch does not remove the blank color.css file, it only
edits the default system preference.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new preference to allow librarians to
add content to the no results found page if they want.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed surrounding <p> in template to <div id="noresultsfound">
Will send follow up patch adding sys pref to translated sql files
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
In India a ILS product called Libsuite8 prints barcodes like b0007432. The barcode is not stored anywhere in libsuite8's database. Neither is barcode available in any of the reports generated by the software.
The barcode 'b0007432' when scanned into the libsuite8 software is de-constructed like 'b' which is the itemtype i.e. Book in this instance, and '7432' which is the 'Accession Number'. The software then takes the logged in staff's branchcode and does a join on three tables 'Location', 'Media_Type', and 'Books' to retrieve the particular record from the database.
There is no possibility of recreating the barcodes for insertion in Koha while doing a retrospective conversion, because of arbitrary length of the barcode string AND arbitrary number of zeros in the numeric part of the printed barcode AND the fact that there are no reports available from the software which contain barcodes AND the fact that the barcode is not stored in the database.
But most importantly due to the simple fact that printed barcodes are duplicated among branches.
Therefore this patch emulates the functionality of Libsuite8 software of converting the scanned barcode into one stored in Koha using the itemBarcodeInputFilter system preference.
To use this new itemBarcodeInputFilter systempreference choice called 'libsuite8', the barcodes stored in Koha must match the pattern of <branchcode>-<itemtype_code>-<accession_number>. This is easy to achieve while doing retrospective conversion from Libsuite8 to Koha.
As expected the itemBarcodeInputFilter will return unmodified barcode if presented with a barcode of pattern <branchcode>-<itemtype_code>-<accession_number>
This revision corrects the way updatedatabase.pl is changed in order to correctly update version and insert the libsuite8 option in the database. Also kohaversion.pl is changed in the recommended format of 3.0X.0X.XXX to reflect database has changed.
This revision also changes the erronorous itemBarcodeInputFilter description in koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref from 'scanned patron barcodes' to 'scanned item barcodes' there by eliminating need for a separate patch for bug 5417.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) applied patch to HEAD
2) set next database number in kohaversion.pl and updatedatabase.pl
3) webinstaller kicked in, update ok
4) typed the barcodes from test cases into check-in
Barcodes used my local branch code, everything seemed ok to me.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes de-DE, en, fr-FR, pl-PL, ru-RU and uk-UA default install values for this system preference (changing from '0'
to 'OFF', the preferred value).
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* supply default suggestion status change email
templates.
* remove the deprecated mail_suggestion_*.tmpl files
There are a couple suggestion statuses referred to
in the code and suggestion management page that currently
do not have notice templates defined: ASK and CHECKED. These
seem to be internal, so perhaps default message templates
are not needed for these.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This system preference allows the librarian to toggle on or off whether the JQuery tablesort is used on the
circ/circulation.pl page. For patrons with many checkouts, this sort may cause very slow page loading (and
therefore slow circulation transaction time), depending on the browser and local machine used. Staff can
still see a sortable list of current checkouts on the members/moremember.pl page.
My revision prevents the template from including *any* tablesorter code if the
preference is feature is turned off: both the circulation list and
the holds list will have no jQuery tablesorter.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Creates new curriculum index for 658 subfields a,b,c and search option in Advanced search (under More Options). Also modifies the installer files to make 658abc display (they were hidden in the frameworks) and to create the new indexes.
The 658 already displays as part of the staff/OPAC subject display line.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch updates the language_rfc4646_to_iso639 mapping table with the
correct mappings for several languages that were not mapped correctly to
the codes used in MARC, including Finnish (which was not mapped at all),
and Armenian (which was mapped to an obsolete code). This patch also
changes English and French to use the proper three-letter codes, which
will eliminate false positives when, for example, limiting by French
brings up results in Afrikaans.
This patch adds the changes to the updatedatabase.pl script, and removes
the incorrectly specified DBversion in the previous patch.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The intended functionality of this system preference was never
implemented. To avoid template changes prior to 3.2.0, put in
hard-coded string 'CSV' to (accurately) identify the type of
the output files in the affected reports.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
this patch create a new systempreference "homeorholdingbranch"-like used only for returns.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
An additional edit was made to circ/returns.pl by Ian Walls of ByWater Solutions to force the dialog message for the return to
use the branch specified by the new HomeOrHoldingBranchReturn system preference, rather than always Homebranch.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
this patch removed the upcoming events messaging option
and the upcoming event message from the system for all
languages since it was never implemented and confuses
librarians and patrons alike
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Per the following koha-devel thread, the use of
staff user subpermissions, AKA granular permissions, is
now the default behavior in Koha. This patch removes
the GranularPermissions system preference.
[1] http://lists.koha-community.org/pipermail/koha-devel/2010-February/033670.html
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This system preference never worked; also, as far as I can tell,
the PINES oISBN service was experimental, not meant for production
use, and is not currently advertised.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
[Documentation note by RM:
This patch adds a new system preference, OverduesBlockCirc,
that can take one of three values:
- noblock: checkouts permitted even if patrons
have overdue items (default)
- confirmation: circ operator asked to confirm checkout
- block: checkouts to patrons who have overdue
items are forbidden
]
Squashed commit of the following:
commit 6a1f66e0686a14d8a89abfc3fe5978dabd0b7af7
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Mon Apr 26 10:27:39 2010 +1200
Tidy up ready to send patch
commit 4d1398df18dcce4fd888cf17a0e2955fdf6ee1e4
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Mon Apr 26 10:26:15 2010 +1200
Bug 4405 - tidy up
commit 3daeb71bc6b690e18dda96aa3c767c2bb0521038
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Mon Apr 26 10:02:04 2010 +1200
Bug 4405 - Overdues block checkout
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
New York Public Library and New York University Library have changed their z39.50 connection information; this patch updates the installer files to the current setups.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Change of permissions names
Change of branch title in guided reports
Add a "Select All / Clean All" on items selection
Add a link to item when a given item cannot be deleted
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The ReadingHistory sytem preference is no longer used, and possibly
was used by only one library anyway. Removed references to it; note
that had it been turned on, a patron viewing checkout history would have
seen old loans showing up twice.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This is done by saving the notices in the message_queue table with
type 'print'. The notices are generated from a notice named
HOLD_PRINT. At the end of the day, they are dumped to an HTML file and
marked as sent by a new cronjob.
This setup is intended to be temporary; modules/batch/ shouldn't be around
forever.
Mandatory SQL:
INSERT INTO message_transport_types (message_transport_type) values ('print');
Modified overdue_notices.pl to support output of html for printing.
The -html option will e-mail notices to those with e-mail, and output
html to print for borrowers without e-mail.
When system preference PrintNoticesMaxLines is set to a positive
integer, it will limit the number of items on the notice to that
number, and append a message to the end telling the borrower to
check his or her account for the full listing of items. This only
affects print notices, not emailed ones.
Mandatory SQL:
INSERT INTO `systempreferences`
( `variable` , `value` , `options` , `explanation` , `type` ) i
VALUES ( 'PrintNoticesMaxLines', '0', '', i
'If greater than 0, sets the maximum number of lines an overdue notice will print. If the number of items is greater than this number, the notice will end with a warning asking the borrower to check their online account for a full list of overdue items.',
'Integer' );
Conflicts:
installer/data/mysql/en/mandatory/sysprefs.sql
installer/data/mysql/fr-FR/1-Obligatoire/unimarc_standard_systemprefs.sql
misc/cronjobs/overdue_notices.pl
Adding two new granular permissions under 'reserveforothers,' place_holds
and modify_holds_priority. If a user does not have modify_holds_priority
permission, the option to change the priority of a hold is hidden.
Revised patch includes changes to mandatory data files including
properly translated fr-FR version.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
- Add OAI-PMH:ConfFile.
- Suppress OAI-PMH:Subset which isn't is .pref file and was never used
by OAI Server.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Tweaked wording of the soundon syspref, added it to the non-English
SQL scripts, and created a DBrev. Thanks to Nahuel and Eric
for the French translation.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Works for HTML5 because it loads smoothly and no plugins required but *at
this time* this update will only work with staff clients which are Firefox
version >=3.5 (std for Koha) but other browsers will soon be adding support.
Additional sounds are included for people to modify and play with, but this
is such a simple upgrade I doubt at this time Koha needs another complex
selector so users can add their own sounds. It could be a nice enhancement
later, of course.
Suggest we stick with HTML5 <audio tag because it is a standard and no
plug-ins.
This simple update has been running live for SMFPL.org for almost 2 weeks
-Darrell Ulm
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Updating mandatory sample notices sql files
NOTE TO TRANSLATORS: Some of these will require new translations
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
[Patch originally by Ricardo Dias Marques]
Bug 3730 - Wrong ISO 639-2 Language Code for Portuguese in database
http://bugs.koha.org/cgi-bin/bugzilla3/show_bug.cgi?id=3730
For 3.0.x head of the Git branch, the ISO 639-2 Language Code for
Portuguese in Koha database is wrong.
Specifically, in the table "language_rfc4646_to_iso639", when the
field "rfc4646_subtag" has the value "pt", the field "iso639_2_code"
should have the value of "por" and NOT the current one of "pol"
("pol" refers to "Polish" as correctly also appears for the code "pl",
in the row above the "pt" one).
In my test setups, this showed some serious sequences for people
that choose the Portuguese language in the Web Installer, namely:
- very weird look of Staff client with missing Header and Footer,
that renders the Staff client unusable
- Portuguese translation apparently not getting updated for the OPAC
(for people that do an Upgrade from a previous version)
This patch is for the 3.0.x branch (I tested it with that branch).
For the master branch, I don't have a database setup to create and
test a similar patch but Chris Cormack nicely volunteered to do that.
Thanks Chris!
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Fixed following error during new en installation:
ERROR 1064 (42000) at line 217: You have an error in your SQL syntax;
check the manual that corresponds to your MySQL server version for the right
syntax to use near ''XSLTDetailsDisplay','0','','Enable XSL stylesheet control
over details page dis' at line 1
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* made AutoSelfCheckID and AUtoSelfCheckPass type free instead of textarea
* consolidated DB updates into one
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Some small, single-branch corporate and special libraries use unattended self-checkout stations, and would like to automate the staff login, so that just going to the sco/sco-main.pl URL would bring the self-check up ready for patron use. This patch create three sysprefs, AutoSelfCheckAllowed, and AutoSelfCheckID/AutoSelfCheckPass. If the site wants to allow automated login, staff would then need to create the selfcheck user record and enter that login ID and password into the sysprefs. The kohaclone/opac/sco/sco-main.pl script has been modified to check these sysprefs and pass values (if present and allowed) into the self-check URL. The URL then bypasses the staff login page and comes up ready for checkout, waiting for the first patron barcode.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
- Add two syspref:
- OPACXSLTResultsDisplay
- OPACXSLDetailsDispay
- Add them to .pref files and dispatch them beetween OPAC and Search
tab.
- Upgrade DB version to 3.2 .113
- Fix something wrong in UNIMARCslim2intranetDetail.xsl
- Display OPAC result and detail pages using those syspref.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Turn on the system preference SpineLabelShowPrintOnBibDetails and a link for the spinelabel printer will appear for each item on catalogue/detail.pl
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
In the current OPAC, there is no easy way to search a particular library.
By default, a user searches all libraries, or with SearcMyLibraryFirst turn on,
the user's home library. In dev_week, a library pulldown menu existed in the search masthead.
This commit adds the option to bring that pulldown menu back
by turning on the system preference OpacAddMastheadLibraryPulldown
This feature is designed to manage collections of items that move
from library to library periodically. Koha can already track who *has*
and item, and who *owns* and item, but not who *should have* an item.
That is the issue this feature addresses.
It allows a persion to create a collection, and add any number of items
to that collection. The collection can then be transferred from library
to library. If an item shows up at a library that does not currently
'hold' that collection, Koha will ask you to transfer it to the library
that does currently 'hold it. In that way, one can even transfer
collections where some of the items are currently checked out. As soon
as they make it back to a library, they will get transferred to the
current library holding that collection.
The feature consists of 4 main pages.
'Home' Page: The landing page, lists collections and provides access to
the rest of the tools.
Access is via the Tools page.
Edit Collections: Add/Delete new rotating collections
Add/Remove Items: Add/Remove items from a given collection
Transfer Collection: Set the current 'holder' of a given collection.
Librarian access is controlled by 'CAN_user_tools_rotating_collections'
#1 Moves Authorized Values under Basic on the Admin page & menu
#2 Add defaults for PROC & CART in LOC
#3 Add MANUAL_INV default
#4 Add BOR_Notes default
#5 Fix descriptions and language on authorized values page related
to these changes
NOTE: This patch removes the sample budgets data which was obsoleted by the new
aquisitions module. The changes introduced with this new module will require
a completely new set of sample data to be written.
Added a syspref to decide what should be displayed by default (holdings
or serial collections)
Added filters for full subscription history (by branchcode and by
subscription)
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
* adding aqcontracts, that will contain contracts attached to a given bookseller. Each basket can be attached to a contract
* adding columns to aqbasket: basket name, note, booksellernote and contractnumber
* adding column to aqorders: uncertainprice, budget_id and statistical fields
* adding table aqbasketgroups: will be used to collate X basket into a single basketgroup
* adding table aqbudgetperiods: will be used to manage budget periods, 1st step to define a budget
* dropping & re-creating a aqbudgets table: completly new content, no update from previous acq
* adding table aqbudget_planning table: will be used to store library budget planning (by ccode, branch, month, and other authorised_values)
* adding column to currencies table: active, that will tell which currency is the used one.
* adding sub permissions for acquisitions module
* adding column to booksellers table: gstrate that will tell the gst rate for the bookseller.
* adding sysprefs: AcqCreateItem (define when item creation is done ordering/recieving/cataloguing), CurrencyFormat
* adding aqordersitems table: link between order and items
* dropping aqorderbreakdown: useless
This preference allows library staff to decide whether to show
the fines tab in the OPAC for logged in patrons.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Pianohacker, this is probably for you for head, and this patch does not need to be applied.
hdl, it can be applied on 3.0 branch
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Adds a new system preference, ShowPatronImageInWebBasedSelfCheck;
if this preference is ON, a patron's image is displayed
if available when using web-based self-check.
Note: a patch for updatedatabase.pl will be made when this
change is ready to push.
This change is sponsored by the Plano Independent School
District.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This system is indended to replace the old opacnotes
and borrowernotes fields in the borrowers table.
This system allows an unlimited number of Libraran and OPAC notes to be
attached to a borrower. Each note has a message, a message type,
the data it was created, and which library created it.
Each message can only be deleted by the library that created it unless the syspref
AllowAllMessageDeletion has been set.
This system may be used simultaneously with the old notes system and does not affect it in any way.
A new database table (messages) was added for this feature.
The System also allows for pre-defined notes for Borrower records
To use these, just create authorised values with the category BOR_NOTES
where the Authorized Value is the short description shown in the pulldown,
and the description is the text that should be in the note.
Original Author: PTFS Contractor <dbavousett@ptfs.com>
This work co-sponsered by Middletown Township Public Library, Middletown, NJ, USA
and East Brunswick Public Library, East Brunswick, NJ, USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
The MARC21slim2OPACDetail.xsl and MARC21slim2OPACResults.xsl XSLT
stylesheets do not obey any of the OPAC sysprefs, OPACURLOpenInNewWindow,
URLLinkText, or a new one added for Bug 3545, DisplayOPACiconsXSLT.
Modified C4/XSLT.pm based on code written by Fréric Demians (thanks!) to
pass the values of the sysprefs to the .xsl files. Modified the .xsl
files to implement them. If the respective sysprefs are set, the OPAC
results and display pages will/will not display the format/material
type/audience icons, will/will not open URLs in new browser windows,
and will/will not use the text entered in URLLinkText as generic link
text when there is no value in the 856 subfield y, 3, or z. (Note that
if subfields y, 3, or z do contain text, the first match is what will be displayed.)
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This preference allows library staff to decide whether to show
the fines tab in the OPAC for logged in patrons.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
