In bootstrap opac-auth.tt, the link to "Home" in breadcrumbs leads
to #, it should lead to opac-main.pl like in all other pages.
Test plan :
- Use boostrap opac theme
- Go to cgi-bin/koha/opac-user.pl when not logged
=> without patch, clicking on Home does not change the page
=> with patch, clicking on Home leads to opac-main.pl
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link ok, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are three instances of incorrectly-capitalized "Patron Attributes"
on the patron import page. This patch corrects them.
To test, view the patron import page (Tools -> Import patrons). Confirm
that instances of the phrase "patron attributes" in the bottom-most
fieldset are correctly capitalized.
Followed test plan, works
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] Check an item that belongs to a restricted patron and
specify a non-default return date.
[2] Verify that the warning message contains "restricted"
rather than "retricted".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Patch applies and makes sense. (I have not checked the actual UI,
but that should not be necessary for such a simple typo correction.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the basket help.
To test:
* Open a basket
* Click help and confirm it's right and there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok
Final comment: koha-qa complains about tabs, removed in followup
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates 3 help files.
To test:
* Visit Administration > Patron Categories
* Click help
* Confirm it's there and right
* Visit Administration > Currencies
* Click help
* Confirm it's there and right
* Visit Administration > Circ Rules
* Click help
* Confirm it's there and right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok. One comment: on circ rules, I think that "you're" can
be correct, but I prefer "you are"
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a few new values to the authorized values help
To test:
* Visit Administration > Authorized Values
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New values ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Updates the 2 notices help files with new info.
To test:
* Visit Tools > Notices & Slips
* Click help and confirm it's there and right
* Visit Tools > Overdue notices/status triggers
* Click help and confirm it's there and right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Long help ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the search help file.
To test:
* Visit Search
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a bit to the addbiblio help file.
To test:
* Go to Cataloging
* Click add new
* Click help
* Confirm help is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help is ok
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the patron help file and adds a missing help file.
To test:
* Go to a patron record
* Click help and confirm text is correct
* Go to patron's purchase suggestions
* Click help and confirm that help file is there and correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both text are correct, link still points to 3.14 manual, but depends
on a value that must change with new release.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the check in help (the only change for 3.16).
To test:
* Visit Circulation > Check in
* Click Help
* Confirm that help text is right
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Help is right
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] View, in the staff interface, a record with alternate holdings
(as controlled by the AlternateHoldingsField system preference).
[2] Verify that the HTML list is closed correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due dates in the self checkout module don't display the time items are
due, and thus items which are on hourly loans don't display an accurate
due date and time. This patch corrects this by adding the "as_due_date
=> 1" parameter added by Bug 9723.
To test, apply the patch for Bug 9723 if necessary. Enable an hourly
loan period for an itemtype in your collection. Log into the
self-checkout system and check out an item which circulates by the hour.
The due date and time should be displayed correctly.
Check out an item which does not circulate hourly. The due date should
be displayed as a date only.
Test in both prog and Bootstrap themes.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to improve the code for the cleanborrowers.pl tool.
- use KohaDates plugin and Koha::DateUtils for date management,
removing a dependency on C4::Dates
- replace variables step1, step2 and step3 with step
- add a JavaScript check if no action if checked
Test plan:
- Backup your DB
- Play with the Patron deletion/anonymisation tool and try to find
something inconsistent.
If you don't find something different, it works!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due dates in the OPAC don't display the time items are due, and thus
items which are on hourly loans don't display an accurate due date and
time. This patch corrects this by adding (and using) a new "as_due_date"
option to the KohaDates plugin made possible by Bug 11148.
Thanks to Galen for providing the changes to KohaDates.pm.
To test, enable an hourly loan period for an itemtype in your
collection. View the display of date due on the following pages:
- Patron details (opac-user.pl) - Log into the OPAC as a user who has
something checked out which circulates by the hour.
- Bibliographic details (opac-detail.pl) - View the details for an item
which is circulates by the hour and is checked out.
- Course reserves details (opac-course-details.pl) - View the contents
of a course reserve, one of which should be an item which circulates
by the hour and is checked out.
Due dates for hourly items should show both date and time and be
formatted correctly. Due dates for non-hourly loans should show only the
date. Test in both prog and Bootstrap themes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
All templates in the staff client now load the DataTables jquery plugin
through a single include file, datatables.inc, which points to a copy of
the plugin in intranet-tmpl/lib/jquery/plugins. This patch removes the
unused copy of the plugin found in intranet-tmpl/prog/en/lib/jquery/plugins.
To test, search the Koha source for references to
jquery.dataTables.min.js. There should be no files which point to the
redundant file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The qTip jQuery plugin is not longer used anywhere in Koha. This patch
removes it.
To test, apply the patch and search the Koha source for references to
the plugin. There should be none.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Something changed somewhere (maybe a new jQuery or datatables version)
and the javascript that redrew the table row after a new quote was saved
stopped working. This fixes the call to the datatables function so that
it matches the API.
Note that although the new quote didn't appear to be added, reloading
the page shows that it had been.
To test:
* Go and add a quote.
* Note that when you press enter after finishing the quote, the line
stops being an editor, and becomes just a display, like it should.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serial receiving was broken when "create an item record when receiving
this serial" is used for the subscription. This bug was introduced by
the patch for bug 12138.
Signed-off-by: Pasi Kallinen <pasi.kallinen@pttk.fi>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 2060 renames columns num_biblios with num_records in the
import_batches table. The addorderiso2709 files had not been fixed.
Test plan:
Add an order from a staged file to a basket and verify the "# Bibs"
columns is correctly filled. Before the patch, the column was empty.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is a typoed "f" outside of the HTML on line 279 of
koha-tmpl/intranet-tmpl/prog/en/modules/acqui/parcel.tt
This patch removes that extra "f".
To test:
It should be sufficient to look at line 279 before and after the
patch has been applied.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When searching (at the OPAC or pro), facets can be enabled but never
disabled. So a user is obliged to relaunch the search.
This patch adds a new link "[x]" at the right of each selected facet.
This link relaunch the search without this facet.
Test plan:
- Launch a search (OPAC and pro)
- Enable some facets
- Disable some facets
Signed-off-by: sonia bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patches pass all tests and QA script. Nice feature!
Tested in Boostrap and Prog, adding end removing multiple
facets in different sequences, adding and removing the
availability limit.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch did not correctly construction ISBN phrase
searches when QP is on. Unfortunately, when attempting to fix that,
I discovered that there's a deep bug in QP that makes it generate
incorrect search queries when combining more than two atoms
in with the || operator. Consequently, until that can be fixed,
this patch ensures that if UseQueryParser is on, AggressiveMatchOnISBN
has no effect.
To state it anther way, AggressiveMatchOnISBN works only when QP
is not in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Catalog a record with the ISBN "0394502884 (Random House)"
2) Export the record, edit it so the ISBN is now
"0394502884 (UnRandomHouse)"
3) Using the record import tool, import this record with matching
on ISBN.
4) You should not find a match
5) Apply this patch
6) Run updatedatabase.pl
7) Enable the new system preference AggressiveMatchOnISBN
8) Repeat step 3
9) The tool should now find a match
Signed-off-by: Tom McMurdo <thomas.mcmurdo@state.vp.us>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
At the OPAC, if the bootstrap theme is used, the modal
dialog does not allow to use the CAS authentication.
This patch proposes, in case CAS is enabled, to
redirect to the opac-user.pl page (like prog theme).
This is because the popup content should stay small
(thinking about mobile surf), and that CAS url is
actually only computed in opac-user (see C4/Auth.pm)
and it would not be performant to compute it in all
pages.
Test plan:
- set syspref opacthemes to bootstrap
- enable the casAuthentication syspref
- fill the casServerUrl syspref with something like:
https://localhost:8443/cas
- go on the opac home page
- click on "Log in to your account" link (top right)
=> You go to cgi-bin/koha/opac-user.pl page where you
see the cas link
- disable the casAuthentication syspref
- go on the opac home page
- click on "Log in to your account" link (top right)
=> You see a popup for login and password
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Normal login still works with/without CAS.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes the use of POSIX::strftime which is based on the
locales of the system.
The DateTime module translates month and day name with success, without
any locale installed.
For the saesons, I use the way used in Koha: write the word in
templates. On this way the translate script will match them and allow
translators to translate them.
This patch adds a regression: the season names are not translated
following the locale selected.
This could be done when bug 8044 will be pushed.
Test plan:
0/ Update your po files and translate the season name.
1/ Create a numbering pattern using season.
example:
Name: Seasonal
Numbering formula: {X}
X: Season, Add=1, Every=1, Set back to 0 when more than 3, formatting
"name of season"
And test the prediction pattern with:
frequency: 1/3 month
First issue : 2013-09-21
length: 12 months
X begins with 2 (21th Septembre is Fall)
2/ Click on the test pattern button, you should get:
Fall 21/09/2013
Winter 21/12/2013
Spring 21/03/2014
Summer 21/06/2014
Change the locale and verify the season names are *not* translated.
Change the Koha language and verify the season names are translated.
3/ Create a numbering pattern using day or month name.
example:
Name: day
Numbering formula: {X}
X: day, Add=1, Every=1, Set back to 0 when more than 6, formatting "name
of day"
Frequency: 1/day
First issue: 2013-11-18
length: 1 month
X begins with 0
You should get:
Monday 18/11/2013
Tuesday 19/11/2013
Wednesday 20/11/2013
[...]
Sunday 15/12/2013
Monday 16/12/2013
Tuesday 17/12/2013
change the locale and verify the day names are translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Tested on top of Bug 11265 and Bug 11263,
and solved merge conflict
Updating PO file gives seasons to translate.
Tested using seasons, day and month
Only note is different behavior
1) To use seasons you need to use staff in desired language
2) To use day and month only need to select locale
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No regressions found. Passes koha-qa.pl, t and xt
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested this again on top of 11263 and it works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The locales list for subscriptions should not be retrieved from the
locales of the system.
This patch retrieves the locales list from the Koha DB (in the same way
as pref language and opaclanguages).
Test plan:
Edit a subscription (or a numbering pattern) and verify the list of
languages is the same as languages available in Koha.
Note: with this patch we loose the saeson translation, it is
normal. See report linked.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
New locale is retrieved from installed languages.
I wonder if that list can be restricted to
'enabled' ones (parsing syspref language value).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Works according to description.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a variable to the template, "protocol" based on
whether "using_https" is set. The appropriate protocol is
inserted before social media links.
To test, confirm that OPACBaseURL is set and lacks "http(s)://"
Social media links should include correct URLs.
A follow-up patch could copy use of this [% protocol %] variable
in other parts of this template which duplicate large chunks of
HTML based on [% using_https %].
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
see test plan for previous patch, only bootstrap theme instead of prog. :)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This switches the URLs used to access Amazon's cover images to the
SSL image server, preventing warnings when using this on a secure
site.
To test:
* Enable Amazon images in the sysprefs, all other cover images off.
* Do a search in the staff client. Using firebug or similar, inspect the
images that indicate both "no image found" and the covers.
* Are they all https, and showing correctly?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It's probably going to become more popular to run Koha in SSL
environments.
Currently on SSL, with Amazon images enabled, a SSL enabled site
will either not show Amazon images (IE, some versions of Firefox?),
or show a warning to users about mixed secure and insecure content
(Firefox, Chrome).
Since we now have the using_https template variable, it makes sense
to use it.
To test:
In each browser you have access to, and preferably with SSL set up
(you can set up a self signed cert for your dev install by following,
more or less, the instructions here:
https://wiki.debian.org/Self-Signed_Certificate)
For the apache config, just copy the one for the OPAC, but set it to
use 443 instead of 80 for the port, and point it to your keys per the
instructions above.
** note that using a self signed cert on your dev install will prompt
you when you connect the first time that OMG I CAN'T VERIFY THIS IS
COOL. You did it yourself, if you can't trust yourself... then who can
you trust?
* Enable Amazon images in the system preferences
* Do a search that you know will have images for, verify that without
SSL
1. the images show
2. the image source is from an Amazon url that uses http://
3. the images are the right size, and look ok
* Do the same using https, verify that with SSL
1. the images show
2. the image source is from an Amazon url that uses https://
3. the images are the right size, and look ok
Clicking on the image should link to the item on Amazon. This patch
also corrects a problem with the Amazon URL used on the images -
it was pointing to a feature that is currently unavailable. That's
fixed here. All you need to check is that it goes to a valid Amazon
endpoint that doesn't show an error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
0) It goes without saying that images being looked at should
continue to be the proper size and look ok.
1) In the staff client, change the OPAC system preference
opacthemes to 'bootstrap'.
2) Enable Amazon images in the system preferences
3) Issue a book you know will have images for a known user
4) Issue a book you know will have images for intentionally
overdue for the same user
5) git reset --hard origin/master
6) In OPAC, log in as the user.
-- On the 'your summary' tab on the left (which is default),
a) In the 'Checked out' tab, there should be at least two
books. The two books issued should have http images.
b) In the 'Overdue' tag, there should be at least one
book. The image for the overdue book issued should
have http images.
7) Click the 'your reading history' tab on the left.
-- The images for the two books issued should have
http images.
8) Apply the patch
9) Repeat steps 6-7, but all the images in question should
have https images now.
10) In the staff client, change the OPAC system preference
opacthemes to 'prog'.
11) Repeat steps 5-9
12) Run the koha QA test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked reading history, overdoes, and checkouts in
bootstrap and prog OPAC. Amazon image URL is now https://.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes a couple of issues:
- disable the feature by default.
- use the datatables include file.
- fix the syspref description.
- replace "History search" with "Search history".
- replace biblio with catalog
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the tabs from Catalog and Authority to
Catalog searches and Authority searches to be a bit more specific.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Patch for the bootstrap theme
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up makes two changes:
1) Change "biblio" to "catalog" when referring to non-authority
searches.
2) Make display of the authority search tab dependent on the
OpacAuthorities system preference. If OPAC authority searches are
disabled we shouldn't show a tab which will always be empty.
To test, view the OPAC search history page with the OpacAuthorities
preference both on and off.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
