This patch finishes the work started in one of the previous
follow-ups and allows CardnumberLength to be set to a value
like ',5'. In conjunction with not including cardnumber in
BorrowerMandatoryField, this allows a cardnumber to not be
required but, if present, to not exceed the specified length.
This patch also updates t/db_dependent/Members.t so that
it runs in a transaction, tests the new return value
of checkcardnumber, and manages the CardnumberLength syspref.
To test:
[1] Verify that prove -v t/db_dependent/Members.t and
prove -v t/Members/cardnumber.t pass.
[2] Set CardnumberLength to ",5" and take cardnubmer out of
the BorrowerMandatoryField list.
[3] Verify that you can save a patron record without a cardnumber,
but if you supply one, that it can be at most 5 characters long.
[4] Add cardnumber back to BorrowerMandatoryField. This time, the
minimum length is 1 even though CardnumberLength is ",5".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch replaces use of the HTML5 pattern attribute with minlength
and maxlength, which is compatible with the jQuery validation plugin
and which, in Chrome 33.0.1750.146 at least, works better.
To test:
[1] Enter a new patron record or edit an existing one.
[2] Verify that the minimum and/or maximum length requirements
set by the CardnumberLength syspref are validated and that
form submission is prevented if the cardnumber doesn't
meet the length requirements.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the previous code and moves the logic from the pl
to a new routine.
Same test plan as previous patch.
/!\ new unit test filename.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 10861: Reintroduced the cardnumber length check (client side)
Previous patches has removed the pattern attribute of the input, it was
not needed. This patch reintroduces it. It will only work for new
browser version.
Moreover, it manages with the ',XX' format (see UT).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the last two follow-ups. The pattern test did not work fully for me
in Firefox 26 (very recent). But I see the message when I clear the field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The default entry is 20 and can be apply to all tables.
Bug 11555 apply the menu entries to all tables, redefining it is
uesless and can be removed.
Test plan:
Test pages impacted by this patch and verify there is no regression on
the tables.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects some errors with the staff client's patron purchase
suggestions page (members/purchase-suggestions.pl).
To test, apply the patch and make sure the patronimages system
preference is enabled.
- View the purchase suggestions page for a patron whose record has a
patron image attached. The image should appear in the left-hand
sidebar.
- View the page for a patron who has submitted no purchase suggestions.
The message should be styled correctly.
- The toolbar on the page should look correct and work correctly.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
member pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Patron details (members/moremember.pl)
- The checkouts, relatives' checkouts, and holds tables have been
modified to exclude articles when sorting of titles.
- Notices (members/notices.pl)
- Circulation history (members/readingrec.pl)
- Statistics (members/statistics.pl)
- Update child to adult patron (members/update-child.pl) - This is the
page which appears in a pop-up when you update a child patron to an
adult (from the "More" menu in the toolbar when viewing patron
details).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When editing additional attributes of a patron of a category with a
code with space (ie "CAT 3"), the Javascript is broken and Additional
attributes are not displayed.
This patch corrects by adding simple quotes around category code in JS
code.
Test plan :
- Create an patron additional attribute
- Create a new patron category with a space in code. ie "CAT 3"
- Create a new patron of this category : /cgi-bin/koha/members/memberentry.pl?op=add&categorycode=CAT 3
=> Without patch the JS is broken (Syntax error, unrecognized expression:
[data-category_code=CAT 3]) and additional attributes are not
displayed.
=> With patch the JS is not broken and additional attributes are
displayed and can be edited.
Signed-off-by: Marc Véron <veron@veron.ch>
In current Koha version it is not possible to create category codes
with blanks.
To test, I changed an existing category code directly in the database.
Then I followed the Test plan.
Without patch, attribute types were not displayed.
With patch, they were displayed as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I recommend not using codes with spaces and fix existing ones.
Koha doesn't allow you to add category codes with spaces, so the only way
to do it is via SQL.
This patch fixes a problem and passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently road types are stored in a specific table in DB. Moreover, an
admin page is present in order to manage them.
This patch proposes to remove this table and this page in favour of a
new authorised value category 'ROADTYPE'.
This patch:
- adds a new AV category 'ROADTYPE' (created from the roadtype table
content).
- remove the roadtype table.
- remove the .pl and .tt file admin/roadtype
- remove the 2 routines C4::Members::GetRoadTypes and
C4::Members::GetRoadTypeDetails
Test plan:
1/ Execute the updatedatabase entry and verify existing roadtypes are
now stored in the AV 'ROADTYPE'.
2/ Verify you can add/update a streettype for patrons.
3/ Verify on following pages the streettype is displayed in patron
information (top left):
circ/circulation.pl
members/memberentry.pl
members/moremember.pl
members/routing-lists.pl
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We handle internationalization of the jQuery datepicker by adding
language configuration strings to calendar.inc which can be processed by
the translation script. This patch adds a similar configuration file for
the timepicker.
This patch also upgrades the timepicker plugin to the latest version,
minified, and places it outside the prog template directory for global
use. The path in templates has been updated accordingly.
CSS has been added to more completely hide the controls for seconds,
milliseconds, and microseconds.
To test, apply the patch and clear your cache so that the browser
loads the new version of the jQuery plugin. Confirm that date and time
selection still function correctly on the circulation page, the patron
detail page, and the offline circulation page (circ/offline.pl).
Test at least one datepicker instance which does not use the
timepicker.
Run translate update on a po file and confirm that the timepicker
strings are now present.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Works as expected, no regression found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- ./translate update LANG
- translate the string into your po file
- ./translate install LANG
- Verify the string is translated.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the renewal count to the 'Check out' and "Details' tabs
of the patron record.
This information already exists in the OPAC view of the patron record.
Since librarians might be serving patrons in person who want to know
this information without looking it up online, it makes sense to show
it in the staff client.
There may also be times where librarians want to see how many renewals
a patron has left, how many they've used already, etc. when making other
decisions.
_TEST PLAN_
Before applying:
1) Go to "Check out" with a patron that has some check outs before today
2) Add some check outs for today
*Ensure that all issues are for items that can be renewed*
3) Note that the Renew column just says '0' followed by a check box
4) Check the 'Detail' tab. It should say the same.
Apply the patch.
5) View the "Details" and "Check out" tabs again
6) Note that the renewal count now appears in the form resembling:
5 of 5 renewals remaining
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Works as described.
To test: Create patron account with outstanding fines. Open "Fines" tab.
Confirm that capitalization is correct.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
String patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the patron's primary email address be displayed (as
a mailto link) on the patron search results page.
Signed-off-by: Melissa Lefebvre <melissa@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, template only change.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the message that is displayed when attempting to
view circ history for the anonymous patron more informative. It
also removes a potential source of log noise if the AnonymousPatron
system preference happens to be set to a blank value.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When using an anonymous patron to anonymise issues history, this patron
may have a huge number of old issues. In this case, trying to display
the reading history of this patron will perform a huge SQL query.
It is not useful to have the reading history of this anonymous patron.
This patch adds an alert instead of old issues when displaying reading
records of anonymous patron.
Test plan :
- Set syspref AnonymousPatron to 0.
- Select a borrower with old issues. For example 123.
- Look at its reading records page : members/readingrec.pl
=> Old issues are displayed in a datatable
- Set syspref AnonymousPatron with this borrower number. For example 123.
- Look at its reading records page
=> Old issues are not displayed and an alert is displayed
- Using SQL query, remove old issues of this borrower :
DELETE FROM old_issues WHERE borrowernumber=123.
- Look at its reading records page
=> A message is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works as advertised and seems like a reasonable thing to do. I
suspect that someone will object... Perhaps that person will implement a
solution which uses an AJAX DataTable.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The descriptions for fines are stored in English in the DB
(accountlines.description). So they are not translatable.
This patch removes the descriptions automatically added and generates
the string in the template.
Test plan:
1/ Execute the updatedatabase entry.
2/ Verify in the following pages the description is consistent:
- members/pay.pl?borrowernumber=XXXX
- members/boraccount.pl?borrowernumber=XXXX
- opac-account.pl
3/ Launch the translate script and update the po files in order to
translate the new strings.
4/ Verify the strings are translated in the interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Corrected few typos in the commit message.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves how the page title and breadcrumbs for the patron
purchase suggestions page are generated by:
* removing references to a template variable that is not set by the
script
* using the patron-title.inc template include consistently
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- changes the GPL version from 2 to 3.
- uses the datatables.inc file
- removes the single pixel before and after the DT (modifying the sDom
value).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new tab to the patron side menu for purchase
suggestions. From this new tab, a librarian can view the patron's
existing purchase suggestios and also create new suggestions in the
name of that patron.
Test Plan:
1) Apply patch
2) Ensure the system preference 'suggestions' is enabled
3) View the details for a patron
4) Click the new 'Purchase suggestions' tab
5) Click the 'New purchase suggestion' button
6) Add the new purchase suggestions
7) You should now end up back at the borrower's purchase suggestions
8) Verify the new purchase suggestion was added
Signed-off-by: Corey Fuimaono <agent.075@gmail.com>
Step though the test plan. All OK.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Editing partron data results in unintended adding of indefinite manual
restriction to it. Reason for it is hidden field add_debarment which
is wrongly initialized to 1 instead of 0. Also JavaScript code seems
to want to toggle checkbox, and since this field is hidden correct
approach would be to change its value to 1.
Test scenario:
1. edit patron data
2. verify that debarrment is wrongly added
3. remove debarrment
3. apply this patch
4. edit patron again
5. verify that debarrment wasn't added
6. intentionally add debarrment and verify that it's saved
7. add debarment, enter something in comment but press cancel
and verify that debarment isn't added
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This fixes this blocker, however, with or without the patch, the date
is not saved correctly. I will file a new bug for that
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up to Bug 2720 makes some template changes which I think
make the interface a little more consistent and streamlined.
Instead of incorporating the manual entry form into the table it is
broken out and follows standard form structure. This lets the table be
hidden altogether if there are no existing restrictions.
The manual entry form is hidden by default and shown when you click a
link to add a manual restriction.
These changes have been applied to both the include file used for
circulation and patron detail and to the patron entry form template.
To test, add and remove manual restrictions from the circulation page,
the patron detail page, and the patron edit page. All operations should
work correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch uses the jQuery validator plugin introduced in
bug 6209 for two reasons:
[1] To supply validation for non-HTML5-compatible web
browsers.
[2] To force use of the validator plugin rather than
built-in validation for HTML5 browsers, which means
that our translations will be used.
Note that a version of the function to prevent double form submission
is used as the submit handler invoked when the validator plugin
is satisified that the form is complete.
To test:
[1] Same as the main test plan, but note that the validation
messages now appear inline rather than as pop-ups.
[2] Verify that the double form submission prevention still
works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When the pref BorrowerMandatoryField is set and a librarian forget to
fill fields, a js popup appears with the following message:
"The following fields are mandatory: surname, etc."
The fields are not translatable.
Test plan:
- fill the pref BorrowerMandatoryField with something like:
title|zipcode|surname|cardnumber|branchcode
- go the members/memberentry.pl?op=add page
- verify you are not allowed to add the patron without filling all
mandatory fields.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patron lists feature is somewhat similar to the record lists feature
in that it allows a librarian to create a list of patrons for later
retrieval and manipluation. These lists can then be used with the batch
patron modification tool.
Test Plan:
0) Apply the patch for Bug 8798
1) Apply this patch
2) Run updatedatabase.pl
3) Access the patron lists feature from Koha's Tools menu.
4) Create a new list via the "New patron list" button.
5) For this list, click the "Edit" button, and change the list name.
6) For this list, click the "Add patrons" button, and search for and
add some patrons to your list.
7) For this list select some patrons to remove them.
8) Try both adding some new patrons, and removing some old patrons
as a single action.
9) Click the "Patrons" link on the Koha toolbar
10) Search the patrons, or browse by letter to get patron results
11) Check the checkboxes next to one or more patrons, and add the
selected patrons to your existing list.
12) Change the "Selected patrons" pulldown to "All resultant patrons"
and add them to your list.
13) Check the checkboxes next to one or more patrons, and add the
selected patrons to a new list.
14) Try manipulating a list of patrons using the batch patron
modification tool.
15) Go back to the Patron Lists feature and delete your lists.
16) Run 'prove t/db_dependent/PatronLists.t'
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you update your "Contact note" via the OPAC that change doesn't
appear in the staff client's "Update patron records" interface. The
field is missing from members-update.tt
To test, log in to the OPAC and update your details
(opac-memberentry.pl), modifying the "Contact note" in the "Alternate
address" section.
In the staff client, view "Patrons requesting modifications"
(members/memgers-update.pl). The changed contact note field should
appear in the list of field awaiting approval for that patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line change - contact note now updates perfectly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add an ID to ease customization via jQuery; an ID is already present
on alt address but was missing from main address
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you select no fines but click the "pay selected" button the resulting
screen offers to let you pay against all fines, which is confusing. To
simplify things this patch disables the "pay selected" button if no
lines are selected.
To test, apply the patch and find a patron with outstanding fines. From
the "pay fines" page (members/pay.pl) try selecting and deselecting
checkboxes and using the "select all" and "clear all" links. When no
item is selected the "Pay selected" button should become disabled.
Confirm that the form submits correctly when one or more fines is
selected.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works nicely in my tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When duplicating a patron record an onclick event is added to many
fields in order to make then clear when focused. This patch updates the
template so that the logic for this can be simplified. A template
variable is set based on the 'opduplicate' variable, and a class added
to the relevant fields. All fields with that class are cleared on focus.
Also changed are several markup issues which were causing validation
errors.
To test, find or create a patron record which has all standard text
fields filled with data. Use the "duplicate" button on the detail view
of that patron to initiate the duplication process.
Focus on each field in the patron entry form in succession. Fields which
contain data should be cleared in the same way they were before the
patch.
Also test a regular edit operation to confirm that fields are not
cleared.
Signed-off-by: Campbell Reid-Tait <campbellreidtait@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked invoice is correctly printed for
- partially paid fines
- paid fines
- unpaid fines
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up patch makes the subtitle part of the same
hyperlink as the title, maintaining consistency with other
pages in the staff interface such as list contents.
To test:
[1] Make sure that the Keyword to MARC mapping includes
mappings to 'subtitle'.
[2] Find a biblio that has both title and subtitle. Check
it out to one patron and place it on hold for another.
[3] In the checkout and patron details pages, verify that
the entry for this bib in the list of checked out titles
or hold requests includes both title and subtitle in
the same hyperlink.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds subtitles (from Keyword to MARC mapping) to the
following tables on the checkout page:
- Checkouts
- Previous checkouts
- Relative's checkouts
- Relative's previous checkouts
- Holds
Additionally it suppresses the appearence of the superfluous word "by"
in cases where the biblio has no author.
Test scenario:
--------------
1)
Make sure that you have one or more fields mapped to subtitle in:
Home . Administration . Keyword to MARC mapping
(e.g. 245 b)
2)
Test the checkout page with patrons having
- current checkouts (today)
- previous checkouts
- relatives (e.g. kids) with current /previous checkouts
- holds on items
- holds on biblios
...with items having:
- title, subtitle, author
- title, no subtitle, author
- title, subtitle, no author
- title, no subtitle, no author
3)
Do the same on patron's detail page
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Place a hold request for a patron
- From the patron details page, navigate to the holds table,
then cancel (delete) it.
- Verify that the hold request is gone.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Move the favicon files for OPAC and staff so that they are not
blocked by the Apache configuration change introduced by the
patch for bug 9812.
Note that this patch makes the favicon customizable by theme,
not both theme and language.
To test, after applying the patch.
[1] Open pages in the OPAC and staff client. Verify that the favicon
is displayed in the usual place in your web browser. Specific pages
to test include
- circulation receipts and slips
- help
- lists view
- web-based self-checkout
[2] Verify that the Apache logs do not contain entries like this:
client denied by server configuration: {...}/prog/en/includes/favicon.ico
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified that the favicon displays correctly. Also
tried changing favicons for staff and OPAC using the
system preferences for those. This still works, where
the system preferences are correctly supported in the
templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "return date" column sort is not using the date sort algorithm because it is
confused by the combination of date data and text data ("Checked out").
This patch adds the use of datatable "title-string" sort type.
With that, the date in ISO format are used for sorting and because
letters are before numbers, "Checked out" rows are more recent than any date.
Test plan :
- set dateformat syspref to "dd/mm/yyyy"
- Go to members/readingrec.pl for a borrower having a old issues and
checked out issues
=> Check that sort of "Return date" is correct.
For example :
With patch :
20/01/2011
06/03/2011
20/03/2011
Checked Out
Without patch :
06/03/2011
20/01/2011
20/03/2011
Checked Out
- Test also with dateformat syspref "mm/dd/yyyy"
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a warning about a duplicated patron attribute is returned,
the value was being passed back for display in the warning
message with the same name as the variable in errors
As the message is displayed in the context of errors
the error value 1 was being displayed not the value
duplicated as intended.
Pass the value to the template with a unique name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed another tiny typo while signing off: "is already in use" instead
of "is already is use."
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Client-side table sorting should exclude articles like "a," "an," and
"the" when sorting by title. This patch adds a custom sorting plugin for
use by DataTables and a configuration line to the DataTables string
configuration file which can be translated for any language.
As an example, this patch modifies the patron checkout history template
to use the new sort on the title column.
To test, apply the patch and clear your browser cache to ensure the
revised JavaScript file is loaded. Sort the table by title. Titles
should be sorted regardless of the presences of "a," "an", or "the" at
the beginning of the title.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and is a good improvement.
I have added German articles to the list for testing purposes
and it worked nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
categorycode and branchcode should show as required under all
circumstances, not just when they are included in the
BorrowerMandatoryField system preference. This patch adds the correct
classes and hints to those fields.
To test, view the patron entry form for a new or existing patron.
Category and Library should show that they are required.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When viewing the list of a patron's holds on the circulation page or the
patron detail page the table of holds doesn't display the holds
expiration date, if present. This patch adds display of the hold
expiration date.
To test, place a hold for a patron and set an expiration date for it.
View the patron's existing holds on both circulation.pl and
moremember.pl. The expiration date you chose should appear in the table
of information about existing holds.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
works great
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1) Apply patch
2) Check out some items to a borrower
3) Choose "Print summary" from the "Print" pulldown
4) Observe the new callnumber column after "Author" and before "Item type"
5) Note that the totals in the footer are still aligned correctly
Signed-off-by: Eli Anthony <library.assist@taylorcountygov.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Issue data is passed to the readingrec template ordered
most recent due date first. Datatables unless specified
otherwise do a presort on the data they will display
the default results in an order the reverse of what was
intended. Disabling the presort preserves the initial sort
order until the user selects a different sort
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
