The TooMany() function and fine calculation functions were incorrectly
hard coded to use homebranch for fetching the circulation rules. Those
ignored completely the syspref HomeOrHoldingBranch where the user
might have set it to holdingbranch and therefore the fines and whether
patron has too many checkouts (TooMany()) were counted using the
unintended branch's rules. This problem only arises in the cases where
there are branch specific circulation rules defined.
Test plan:
1. Make sure following tests pass:
$ prove t/db_dependent/Circulation/_CalculateAndUpdateFine.t
$ prove t/db_dependent/Circulation/TooMany.t
Test plan for fines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with home and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl /usr/share/koha/bin/cronjobs/fines.pl
6. Notice that fines have popped up now to the patron incorrectly
7. Apply patch
8. Pay fines, Check-in the item and check it out again
9. Run perl /usr/share/koha/bin/cronjobs/fines.pl
10. Notice that fine is now 0. This means that the branch
B (holdingbranch of the checked-out item) specific rule is used.
Test plan for staticfines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with homebranch A and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice that now there is inccorectly fines
6. Apply patch
7. Pay fines, Check-in the item and check it out again
8. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice the fines are now not generated
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- Run "perldoc misc/cronjobs/delete_patrons.pl"
- Note the absence of information about the potential conflict
between --not_borrowed_since and anonymization
- Apply this patch
- Re-run the perldoc command and make sure the note about
anonymization make sense
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We often get asked where something can be found in setting,
adding the hint that RealTimeHoldsQueue is a system preference
is hopefully helpful here.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The real time hold queue and the build_holds_queue.pl jobs are not 100% compatible in that we should not be running the cron if the real time queue is enabled, this could lead to double server work. It would be good to have a check in build_holds_queue for the RealTimeHoldsQueue syspref and not run the job if the preference is enabled.
There might be times when we'd want to force a run of this job without changing the syspref. To that end we would also want a flag for this job so that system administrators could force the job from the command line if required, overriding this limitation.
Test Plan:
1) Apply this patch
2) Try run misc/cronjobs/holds/build_holds_queue.pl with the -h/--help and -m/--man options
3) Disable RealTimeHoldsQueue
4) Run with no options, should succeed
5) Enable RealTimeHoldsQueue
6) Run with no options, should display a message and not rebuild the
holds queue
7) Run again with the -f/--force option, should succeed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Like Bug 26832 added binmode UTF-8 to script misc/search_tools/export_elasticsearch_mappings.pl, this should be added to misc/cronjobs/runreport.pl.
Test plan :
1) Do not apply patch
2) Create a SQL report with :
SELECT 'accentué',barcode FROM items limit 3
3) Note the id of this report, for example 1
4) Run : misc/cronjobs/runreport.pl 1 --format csv | tee /tmp/without.csv
=> You see output with unknown character instead of é :
5) Run : file --mime-type /tmp/without.csv
=> You see : /tmp/without.csv: iso-8859-1
6) Apply patch
7) Run : misc/cronjobs/runreport.pl 1 --format csv | tee /tmp/with.csv
=> You see correct output with é
8) Run : file --mime-type /tmp/without.csv
=> You see : /tmp/without.csv: utf-8
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds background queue options to cleanup_database.pl to allow
for purging completed background jobs.
--bg-jobs DAYS Purge all finished background jobs this many days old. Defaults to 1 if no DAYS provided.
--bg-type TYPE What type of background job to purge. Defaults to "update_elastic_index" if omitted
Specifying "all" will purge all types. Repeatable.
To test:
1 - Enable elastic search in Koha
2 - perl misc/maintenance/touch_all_items.pl
3 - Generate an number of diffrent types of bg-jobs (eg batch_hold_cancel,
batch_biblio_record_deletion, batch_item_record_deletion)
4 - Check db and note there are a bunch of diffrent jobs
5 - Update to make them old
UPDATE background_jobs SET ended_on = '2022-10-01 00:00:00', status='finished'
6 - perl misc/cronjobs/cleanup_database.pl
7 - Note bg-jobs entry shows in help
8 - perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 -v
9 - Note that elasticqueue would have been cleared
10 - perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 -v --confirm
11 - Note that number of entries deleted is reported
12 - Attempt to clear other job types, including "all" eg
perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 --bg-type batch_item_record_deletion -v --confirm
perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 --bg-type all -v --confirm
13 - Confirm in staff interface that jobs are gone:
http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
(Uncheck 'Current jobs only')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be nice to be able to combine several types in a single run,
but exclude others, without having to have multiple cron lines
Test Plan:
1) Apply this patch
2) Run process_message_queue.pl with a single -c parameter
3) Note behavior is unchanged
4) Run process_message_queue.pl with multiple -c parameters
5) Note all the codes specified are processed
6) Repeat 2-5 with -t for type limits
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currenlty the output with -v from overdue_notices is a bit overwhelming and hard to parse
I do a few things here:
1 - Only show SQL if verbose > 1
2 - Add some separators to make it more readab;e
3 - Remove some redundant messages with branchcode and borrowernumber
To test:
1: perl misc/cronjobs/overdue_notices.pl -v
2: Notice you get a LOT of information all smushed together
3: Apply patch
4: perl misc/cronjobs/overdue_notices.pl -v
5: Less info, and easier to read
6: perl misc/cronjobs/overdue_notices.pl -v -v
7: All the info, but nicer to read
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
cleanup_database.pl cronjob has a typo in it's usage/help:
"preserve-logs" option should be "preserve-log" as it is everywhere
in the code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This script had some oddities:
- There was a LEFT JOIN to subscription, but no error printed if no subscription
I changed this to a JOIN as there is a constraint, so this shoudl not happen
- Publisheddate was checked after the SQL, moved into query
- We checked for the next issue, and marked late only if that issue was already expected
This overruled grace period, which should be the mnarker for a serial being late
The grace period should be extended if you wish to wait for next issue
- If no next published date, we reported an error on the planneddate
- Script without confirm had no reporting
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added command line ooption logging and completion logging where
cronlogaction was already imported. We should probably standardize all
cronjobs, but this is a start
One cron didn't log on confirm, likely we need to update all crons to log
if confirm, and possibly not log if running in test mode? Another bug as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch proposes a new standard for cronlogaction
We copy @ARGV into a space separated string, then pass this to
cronlogaction
At the end of the script we add a call with info "COMPLETED"
To test:
1 - Apply patch
2 - perl misc/cronjobs/advance_notices.pl -v -m 4 -n -c
3 - sudo koha-mysql kohadev
4 - SELECT * FROM action_logs WHERE interface="CRON";
5 - Note start and completion logged
6 - Note command line arguments included in info
If this looks good I will copy this pattern to the other cronjobs
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The overdue and pre-overdue cron scripts are not skipping the generation of phone notices. This causes many phone notices to be created that will always be left at 'pending' as the Talking Tech outbound script creates its own phone notices and puts them in the message queue.
Test Plan:
1) Enable Talking Tech
2) Enable predue and overdue notice phone transports for a patron
3) Generate overdues and predues, notice phone notices are generated
4) Apply the patch
5) Repeat steps 2-3
6) Note phone notices are not generated
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries don't want to auto-cancel holds, but we should not remind
a patron about a hold which has expired.
To test:
1 - Place a hold for a patron
2 - Set it waiting
3 - Run the holds reminder script in the future
perl misc/cronjobs/holds/holds_reminder.pl -day 1 --date '2023-09-12' -v
4 - Note the holds would be reminded
5 - Set expirationdate for the hold less than today
UPDATE reserves SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY);
6 - Run the remidner cron again
7 - No holds trigger!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the script use an execution lock as provided by
Koha::Script. Previous attempt got too complex and contentious, and
given we have a simple way to achieve the same thing, I decided to
submit an alternative approach.
To test:
1. Apply this patch
2. Add the following content to misc/cronjobs/process_message_queue.pl
on line 83:
sleep 100;
3. Save the file
4. Have two terminals open
5. On the first one, run:
$ kshell
k$ misc/cronjobs/process_message_queue.pl
6. On the second one, run the same
=> SUCCESS: The second one dies telling it had to skip the run
7. Undo your changes:
$ git checkout misc/cronjobs/process_message_queue.pl
8. Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's slightly debatable whether auto_too_soon is an error or not. I think
it leans far enough towards error that the other patch is correct. The change, however,
will affect notices and means we cannot count auto_too_soon anymore
This patch adds a new 'results' hash to the info - this includes a count per error
(including auto_renew i.e. success) allowing for notices to decide how to display the info.
To test:
1 - Add to Auto renew digest notice:
[% IF results %]
There were [% results.auto_too_soon %] items that were too soon.
[% END %]
2 - Check out some items to a patron that will be too soon
3 - Check out one that is not too soon and will renew
4 - Ensure patron has auto renew digest selected and that AutoRenewalNotices is set to follow patron preferences
5 - Run the auto renewals cron
6 - Confirm the notice for the patron displays 1 successful renewal, no failures, and a correct count of too_soon
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch prevents auto_too_soon errors being counted towards auto
renew errors.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch defaults to using "email" rather than "sms" notices
when AutoRenewalNotices is set to use the --send-notices cron switch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Following bug 18532, one can set a patron's messaging prefs to deliver an auto-renew notice via SMS.
However, the auto_renewals cron only knows how to generate email notices. We should not allow the selection of non-functional transport types.
Test Plan:
1 - Set pref AutoRenewalNotices - 'according to patron messaging preferences'
2 - Set circ rule with:
Loan period: 5 days
No renewal before: 5
AutoRenewal: Yes
Renewals allowed: 5
3 - Set SMS Send driver to Email
4 - Find a patron and set them to receive auto renewal notices via SMS and no other transport
5 - Provide a proivder and sms number for the patron
6 - Checkout an item to the patron, set due date to yesterday
7 - Run auto renewals:
perl misc/cronjobs/automatic_renewals.pl -v --send-notices -c
8 - Item renewed, no message sent
9 - Check in item, checkout again due yesterday
10 - Apply patch
11 - Browse to Tools->notices and slips
12 - Edit AUTO_RENEWALS and AUTO_RENEWALS_DIGEST to copy email template to sms and add a title
13 - perl misc/cronjobs/automatic_renewals.pl -v --send-notices -c
14 - Item renewed, confirm patron has a notice in their account
15 - Check the digest option, check in item, checkout again as due, repeat cronjob and note digest notic
16 - sign off
https://bugs.koha-community.org/show_bug.cgi?id=30355
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the script use the Koha::DateUtils tools instead.
To test:
1. Run:
$ kshell
k$ perl misc/cronjobs/batch_anonymise.pl --verbose --days 7
=> SUCCESS: You see (the date may vary):
Checkouts and holds before 2022-02-15 will be anonymised.
2. Apply this patch
3. Repeat 1
=> SUCCESS: Same output
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Talking Tech outbound script currently just adds the
ReservesMaxPickUpDelay to the waiting date to calculate the
"expiration date", but it should use the actual hold expiration
date which may differ from this naive calculation based on
various system preference values.
Test Plan:
1) Create a holiday for tomorrow
2) Set ReservesMaxPickUpDelay to 5
3) Set "Days mode" to "Same week day"
4) Enable ExcludeHolidaysFromMaxPickUpDelay
5) Enable TalkingTechItivaPhoneNotification
6) Create a hold and fill the hold so it is waiting
7) Enable "Hold filled" phone notices for that patron
8) Create a 'phone' version of the HOLD notice
9) Run ./misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl --type RESERVE -w 0
10) Note the output has the expiration date ( 15th colume ) 5 days from now which is *not* the hold's expiration date
11) Apply this patch
12) Repeat the command from step 9
13) Note the expiration date column now matches the holds actual expiration date!
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a report containing:
SELECT tomascohen@theke.io;
2. Have a members notice containing ¡ and other non-ASCII characters.
3. Run (changing the report number and notice code accordingly):
$ kshell
k$ perl misc/cronjobs/patron_emailer.pl --report 4 \
--notice BIRTHDAY --from tomascohen@theke.io --module members
=> FAIL: non-ASCII characters are broken
4. Apply this patch
5. Repeat 3
=> SUCCESS: Things print correctly!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
Bug 29697: (follow-up) Use flag embed_items
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new system preference to allow systems librarians the
option to pick wich address to use for overdues notices.
We default to 'cron' to allow existing uses of '--frombranch' on the
command line to continue to function but now allow end users to override
this option via the new OverdueNoticeFrom preference.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects missing import
To test:
1 - perl misc/cronjobs/holds/auto_unsuspend_holds.pl
2 - It dies
Undefined subroutine &main::AutoUnsuspendReserves called at misc/cronjobs/holds/auto_unsuspend_holds.pl line 38.
3 - Apply patch
4 - run again
5 - It succeeds!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Silly mistake, 'delete if verbose' must be 'delete if confirm'
Test plan:
Try the cleanup_database.pl script to delete transfers and old issues.
Using --transfers --old-reserves and the --confirm flag the entries must be
removed
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Apply patch and notice the following error is gone:
$ perl misc/cronjobs/import_webservice_batch.pl
Undefined subroutine &main::GetStagedWebserviceBatches called at misc/cronjobs/import_webservice_batch.pl line 46.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In holds_reminder.pl, the script loops over all available branchcodes. For each iteration of the loop, if not using the calendar, the script subtracts the days parameter from the current date to get the waiting date threshold. The problem is that this method alters the DateTime object in $date_to_run, so for each iteration of the loop, the waiting date becomes farther and farther in the past, when it should always be the same!
The solution is to either clone the "date to run" for each call to subtract, or to move it out of the loop since it doesn't need to be recalculated each time.
Test Plan:
1) Become the koha user using koha-shell
2) Run DBIC_TRACE=1 misc/cronjobs/holds/holds_reminder.pl --days 7
3) Note in the queries that for each loop, the waiting date is different
4) Apply this patch
5) Run the command in step 2 again
6) Note the queries all now have the same waiting date threshold!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 28514 changed the way holds_reminder.pl searches for templates, using a direct search for letters,
but should be using find_effective_template instead. Now, if a branch specific template does not exist,
it will skip that branch.
Test Plan:
1) Ensure you only have the default HOLD_REMINDER template
2) Become the koha user using koha-shell
3) Run misc/cronjobs/holds/holds_reminder.pl --days 7 -v
4) Note that the script skips every branch
5) Apply this patch
6) Run the command in step 3 again
7) Note the script doesn't skip over any branches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TO test:
1 - Check out an item marked for autop renewal to a patron and make it overdue
2 - Set system preference AutoRenewalNotices to follow messaging prefs
3 - set that borrower to receive both email and SMS AUTO_RENEWALS_DGST
4 - confirm your AUTO_RENEWALS_DGST does not have SMS content but does have email
5 - run the auto_renew cron
6 - item is renewed, but error from cron, and cron dies:
No circulation AUTO_RENEWALS_DGST letter transported by sms at /kohadevbox/koha/C4/Letters.pm line 583.
no letter of type 'AUTO_RENEWALS_DGST' found for borrowernumber 5. Please see sample_notices.sql at misc/cronjobs/automatic_renewals.pl line 305.
Can't use string ("1") as a HASH ref while "strict refs" in use at /kohadevbox/koha/C4/Letters.pm line 898.
7 - Apply patch
8 - Make item eligible for auto renewal agian (or checkin/checkout)
9 - Run the cron
10 - There is still 2 warn, but cron does not die:
No circulation AUTO_RENEWALS_DGST letter transported by sms at /kohadevbox/koha/C4/Letters.pm line 583.
no letter of type 'AUTO_RENEWALS_DGST' found for borrowernumber 5. Please see sample_notices.sql at misc/cronjobs/ automatic_renewals.pl line 305.
11 - Patron receives email and item is renewed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
With this patch you can access items using:
Number of items [% items.count %]
[% FOR i IN items %]
[% SET checkout = i.checkout %]
Item [% i.itemnumber %] is due on [% checkout.date_due | $KohaDates %]
[% END %]
== test plan ==
1. Add the following to PREDUEDGST and DUEDST:
Number of items [% items.count %]
[% FOR i IN items %]
[% SET checkout = i.checkout %]
Item [% i.itemnumber %] is due on [% checkout.date_due | $KohaDates %]
[% END %]
2. Find a patron and set there messaging prefs 'Item due' and 'Advanced
notices' so they get an email and 'digest only'.
On 'Advanced notices' set Days in advance to 1.
3. Check some things out to a patron and make them due tomorrow.
4. perl /kohadevbox/koha/misc/cronjobs/advance_notices.pl -v -c
5. Check the patrons notices and make sure the PREDUEDGST looks right.
6. Check some things out to a patron and make them due today.
7. Repeat 4.
8. Check the patrons notices and make sure the DUEDGST looks right.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
EDIFACT is an abreviation, so it should be ALLCAPS.
* Electronic Data Interchange for Administration, Commerce and Transport
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Use of uninitialized value in string ne at misc/cronjobs/automatic_renewals.pl line 193.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
