This reverts commit c9905750e5.
Test plan:
1/ Open a bib record with more than 1 item ,
2/ Select all items
3/ Chose Modify selected items
4/ put you "ق ك و" in notes
5/ Verify the items have been updated correctly
6/ put you "éàç" in notes
7/ Verify the items have been updated correctly
8/ put you "ق ك و éàç" in notes
9/ Verify the items have been updated correctly
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed bug on master and that the patch fixes it.
Passes all tests and the QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Until now, the maximum number of item records to process in a batch was
hardcoded to 1000.
This patch adds a syspref MaxItemsForBatch in order to allow to adapt
this value.
Test plan:
- set the pref to 2
- try to delete a batch of 3 items: they are not displayed
- try to modify a batch of 3 items: you are not allowed to do that
- set the pref to 1000 and try again. Now items are displayed and you
are allow to modify them.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes a problem where if a staff user has superlibrarian
permissions, but also has module-specific permissions, they are
prevent from editing item records that they should be allowed to.
To test:
[1] Turn on IndependentBranches.
[2] Register a superlibrarian staff user at branch A.
[3] Give that new account at least one other module-level
permission. This cannot be done through the user interface,
however, but can be done via SQL:
UPDATE borrowers SET flags = 3 WHERE userid = 'XXX';
[4] Log in as that new superlibrarian.
[5] Bring up the item details (catalogue/moredetail.pl) page for
an item at branch B. Note that there is no 'Edit Item' link.
[6] Similarly, try editing that item (cataloging/additem.pl). Note
that the edit form forbids you from touching the item.
[7] Finally, try editing that item using the Tools | Batch item
modification utility. Note that it doesn't allow you to do so.
[8] Apply the patch.
[9] Repeat steps 5 through 7. This time, the item actions should
be allowed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and test suite.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory item fields are not indicated the same way in all places. This
patch corrects two places where required fields were shown in bold
rather than using the standard "required" class: When adding an order
from a staged file and when adding an item for a new issue of a serial.
This patch also normalizes the text input size on item entry forms: In
some places it was 50, others 67. I have changed the latter to 50.
Unrelated changes: Added $KohaDates formatting of date and time and
corrected capitalization on a heading on the add order from staged file
page.
It would be nice to be able to use the same method for displaying the
item form as we use on neworderentry.tt -- pulling in the form from a
separate include. However that system is designed for handling multiple
items and would need to be adapted for these cases.
To test, you must have a staged file from which to add an order. Open an
existing basket or create a new one and choose to add an order "From a
staged file." Choose a staged file from which to order. The item entry
form under the "Import all" heading should show required fields in red.
To test in serials: Begin the process for receiving an item from an
existing subscription. On the serials-edit page, find the "Click to add
item" links and click to open the item edit forms. There should be one
under the numbered issue and the supplemental issue forms. In both cases
the item edit screen should show the mandatory item fields in red.
Confirm that the cataloging add item form looks correct and works
correctly.
Revision: Left out the "required" note which should appear after each
required field.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After executing a batch items modifications, a dialog is displayed above
the result table. It contains the number of items (and total fields)
which has been modified.
Note that items that are selected for modification but which do not
end up actually be changed are not reported in the final counts.
This patch adds two methiods to C4::BackgroundJob, ->set() and ->get(),
that allow background jobs to pass arbitrary data back to the client.
Test plan:
1/ Go to tools/batchMod.pl
2/ Enter a barcodes list
3/ Check/uncheck items and fill some values to apply
4/ Save
5/ The table summary will be displayed with a dialog box on top:
XX item(s) modified (with YY fields modified)
Check that XX and YY correspond with what you expected.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
batch modification still seems to work correctly, with the helpful addition of the counter. Thanks!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sometimes when using the batch item modification tool, we would like to
automatically uncheck on loan items.
This patch also adds a new routine in C4::Circulation, IsItemIssued(),
which, when passed an itemnumber, returns whether the item is
currently on loan.
Test plan:
1/ Go to tools/batchMod.pl.
2/ Enter some barcode (at least 1 should be on loan).
3/ Click on the Continue button.
4/ Click on the "Clear on loan" link.
5/ Check that on loan items are unchecked.
Launch the unit test file:
prove t/db_dependent/Circulation/IsItemIssued.t
http://bugs.koha-community.org/show_bug.cgi?id=10572
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as expected, only modifies items that are checked (still). No regression noted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the pre-population of the fields for the batch
item editor with the default values from the default framework
optional and off by default.
Test Plan:
1) Apply patch
2) Add default values for cost and replacement cost to the
default framework.
3) Browse to Tools / Batch item modification
4) Choose a file, or entire some barcodes in the text area
5) Ensure that the 'Populate fields with default values from default
framework' is *not* checked
6) Click 'Continue'
7) Observe that the fields for cost and replacement cost are blank
8) Click the 'back' button on your browser
9) Check the checkbox to enable the default value
10) Click 'Continue'
11) Observe that the fields for cost and replacement cost now contain
the default values you assigned them in the default MARC framework
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Switch works correctly, all tests and QA script pass.
Note: there is a bug with default values for all non text input
fields. Default values won't be applied for those fields as the
pull downs are not preselected correctly with the default values
defined in the framework.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove the unrequired extra processing and pass
the array of itemnumbers as itemnumbers_array
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1) Browse to Tools › Batch item deletion
2) Enter a list of barcodes, make sure you have at
least one barcode listed more than once
3) Click continue
4) Verify the duplicated barcode shows up multiple times in the table
5) Apply patch
6) Refresh the page
7) Verify each barcode now displays only once
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
verified bug and fix - both good.
Nice test plan, thanks!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In a librairies network, we would like to declare specific values just
for one (or more) library.
Here we implement the ability to associate categories, patron attributes
types and/or authorised_values with librairies (branches).
This patch adds 3 new association tables:
- categories_branches ( association table between categories and branches )
- authorised_values_branches ( association table between
authorised_values and branches )
- borrower_attribute_types_branches (association table between
borrower_attribute_types and branches )
Plan test:
- Create (or modify) categories, patron attributes and
authorised_values and link it with one (or more) library.
- Set one of these librairies
- Go to one of the multiple pages where this specific value must be displayed
and check that it does appear.
- Set a library not concerned.
- Check on the same pages this value is doest not appear.
A page list:
cataloguing/addbiblio.pl
cataloguing/additems.pl
members/members-home.pl
members/memberentry.pl
acqui/neworderempty.pl
tools/modborrowers.pl
and others :)
Please say me if filters don't work on some pages.
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Initialized $op, and changed lines like "$op => 1" and
"$error => 1" into separate, conditional template param calls.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In catalogue/detail.pl you can now select "Delete items in batch" in
"Edit" menu. You are redirected to batchMod.pl for chosing which items
have to be deleted.
You need to have 'tools.items_batchdel' permission to see this menu
entry.
Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A new option - Edit items in batch - is made available under the menu - Edit - in the catalog detail page. When this option is selected the tool batch item modification is called with all items under this biblio passed as parameters.
User can then edit all items of this biblio in batch. Once changes are saved the "done" link takes the user back to the catalog detail page of this biblio.
To test:
Navigate to catalog detail page of any biblio with one or more item records. Use the option "Edit items in batch" from the "Edit" menu. Modify the items in batch, say the collction code or lost status. Press "Save", verify that changes have been effected in the confirmation screen. Use the "Done" link to navigate back to the catalog detail page.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Check for div 0 when calculating percentage
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
div0 no longer appears on 0 size jobs.
Passes t xt
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Optionally delete bibliographic record when batch deleting items, if no items remain on the record.
Adds deleting of reserves to DelBiblio. Since subscriptions are deleted automatically,
it made sense for deletion of reserves to maintain the same behavior.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
I like the way this works, and it does. Passes tests.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Pass charge_fee = yes wherever is LostItem() called, which effectively
means tha there's no change.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Call LostItem() whenever item is lost.
LostItem() new arg - mark returned.
Disabled Lost Status on catalogue item edit.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
For follow up we need to explain how to hide the 952$1 (lost) from
the framework by putting it in the 'ignore' tab.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Corrects a problem in batchMod.pl when accented characters are used.
When modifying multiple items in batchMod.pl, the batch modification
fails if accented characters are used in any of the fields of the
modification form.
This is a port of Frédérick Capovilla patch from 3.2 to 3.4 version
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This only occurs with IndependantBranches turned on; in an attempt to check that the items being
modified belonged to the user's branch, the code made a simultaneous comparison and assignment,
which is not permitted in all compilations of Perl.
Splitting the assignment of $itembranchcode and the check for its non-null value fixes the problem
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Also adds title/author information to output of batch deletions
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Adding template flag to indicate valid results (hidden or not)
- Clarifying warning messages based on various outcomes
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Use of switch generates errors in perl 12 and above
Replaced uses of the Switch module by if- else constructs
Removed some mixed space+tab indentation around these where
it generated visual confusion
As of perl 10 you can use given/when constructs but this is not
supported in earlier perls.
Item type drop-down in the batch item modification tool
now has its default value set to the 'no change' value.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Classification source drop-down in the batch item modification tool
now has its default value set to the 'no change' value.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This was owed to the Item modification construction and the change in GetBranchesLoop behaviour which selects the user branch by default.
Adding a void branch selected
Changing default value to ""
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Removed instances of 'use YAML' that were either completely
unnecessary or which were used only in debug code. Also
removed a needless import of Data::Dumper.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
For an unknown reason, the last item batch updated is NOT updated.
After investigating a LOT (more than 3 hours), it appears the problem comes from the AutoCommit=0
I tried to solve it, but failed. So I remove the AutoCommit=0 option.
this result in a loss of perfs, but it's not a big problem I think. OTH, now everything is updated !
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Change of permissions names
Change of branch title in guided reports
Add a "Select All / Clean All" on items selection
Add a link to item when a given item cannot be deleted
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
(so they are not modified by mistake)
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Also fix the barcode not found problem (due to empty lines)
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
The MARC21 framework uses $0 for the item withdrawn status. Because
of how the tool had marked the barcode and stocknumber as being
uneditable, this resulted in an off-by-one error, causing the wrong
item fields to be updated.
Fixed by simply not including the uneditable fields in list
of item fields that can be edited - if you can't change the barcode,
there's no point in displaying it in the list of fields.
Also fixed how the bib title/author/ISBN got displayed so that the
withdrawn column gets displayed after an item update.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Liz Rea <lrea@nekls.org>
Notes :
Permissions themselves were already added in commit 50ef9288606077dfc2b457db490f6fc2a5461c6c : (bug #3396) This add batch deletion of items and fixes permissions for batch modification by Jean-André Santoni
Javascript for bolding currently selected page in tools-menu.inc enhanced to support url with parameters
