This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the following issue:
If the user comes from a basket, the list view is displayed but there is
no way to select the modification template.
Now the template can be chosen on the list view. This way, the user is
able to change the modifications to apply and see the previewed records.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool to modify records in a batch.
This feature adds:
- a new pl/tt files tools/batch_record_modification
- a new permission: tools > records_batchmod
Test plan for biblios:
0/ Create a new marc modification template with some actions.
1/ Generate a list of biblionumbers you want to modify.
There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Modify"
- generating a list from a report
2/ On the "Batch record modification" tool verify:
- information is correct.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Test plan for authority:
0/ Create a new marc modification template with some actions.
1/ Generate a list of authid using a report:
2/ On the "Batch record modification" tool verify:
- authorities are display with the summary.
- the preview link show you the needed record.
3/ After clicking on the "Modify selected recors" button, verify
the records have been modified as you wanted.
Catch of errors:
if an error occurs during the modification process, the tool
displays an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The a patron's userid should be a matchpoint in the same manner as
cardnumber. Though not enforced as a unique key by the database yet
( pending bug 1861 ), this field is effectively unique as uniqueness
is enforced by Koha itself.
Test Plan:
1) Apply this patch
2) Browse to tools/import_borrowers.pl
3) Download the starter CSV file
4) Edit the csv file to include 1 or more patrons
* Make sure to leave the borrowernumber field empty
* Make sure the userid field matches the patrons you wish to overwrite
5) From import_borrowers.pl, upload your file
* Set "Field to use for record matching" to "Username"
* Set "If matching record is already in the borrowers table" to "Overwrite the existing one with this"
6) Click "Import"
7) Verify the patrons in your file have been updated in Koha
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Do exactly what's announced. This may help.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
1/ Go on tools/export.pl
2/ Export some records and specify you don't want the fields 245 (the
whole field, do not specify a subfield).
3/ Export, BOOM
Software error:
Arguments must be MARC::Field object at /home/koha/src/tools/export.pl line 400.
Test plan:
Apply the patch and confirm the fields 245 are not exported and the
export works as expected.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Export fails to asplode with this patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This allows the exporter (Tools -> Export) to have any combination of
branches selected, rather than it being all or only one.
Test Plan:
* Apply the patch
* Go to the exporter, see that instead of a dropdown you now have an
elegently laid out grid of branches you can select from
* Select some branches, run the export
* Note that only records with items in the selected branches are
returned.
* Repeat this with the item related options (as that code was refactored
slightly) and make sure everything is sane.
Sponsored-By: South Taranaki District Libraries
Signed-off-by: Thomas <tomsStudy@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to perl 5.12 keys can only operate on a hash. So although
$data[0] ( thats an abysmal variable name! ) will contain a hash ref
the perl compiler cannot deduce that from the context and gives
a syntax error. Add the hash sigil to make the context explicit and
the compiler can generate the correct code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Letters::getletter does not set mtt in value ( i.e. { email => "my
email notice} ) at the contrary of the get_letter routine defined in
tools/letters.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test:
1. Edit record, add 100.000 chars text to 500a
2. xml export produce the record,
3. mrc export do not produce the record, warning on log export.pl:
Record length of 111000 is larger than the MARC spec allows (99999
bytes). at /usr/share/perl5/MARC/File/USMARC.pm line 314. record
(number 139489) is invalid and therefore not exported because its
reopening generates warnings above at...
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm that exporting biblio records larger than 10000 characters in
ISO2709 produces invalid files. After applying this patch, the culprit
record (too large, but also other inconsistencies preventing record
parsing with MARC::File::USMARC) is not exported anymore. A warning is
produced in Koha Apache log file. Warnings to the user on WUI would be
better, but it isn't the case yet, so it isn't a regression.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I agree that a visible warning/result message in the staff interface
would be nice, but this works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the sysprefs are empty, we assume that the librarian can edit all
subfields, even if s/he has the restricted permission.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To know if the user is a superlibrarian, we have to call
C4::Context->IsSuperLibrarian
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two permission names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The both syspref names have been changed since the first patch.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following permissions:
- editcatalogue.limited_item_edition: Limit item modification to barcode, status and note
- editcatalogue.delete_all_items: Delete all items at once
- tools.items_limited_batchmod: Limit batch item modification to item status
The SubfieldsToAllowForLimitedEdition syspref is used to define which subfields can be edited
when the editcatalogue.limited_item_edition permission is enabled.
In the same way, the SubfieldsToAllowForLimitedBatchmod is used to define which subfields
can be edited when the tools.items_limited_batchmod permission is enabled.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fixes the permission on the tools page
- Fixes some capitalization
- Changes 'Reserves' to 'Holds'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool for deleting records.
Biblios and authorities will can to be deleted with a simple list of
biblionumber or authid.
This feature adds:
- a new pl/tt files tools/batch_delete_records
- a new permission: tools > records_batchdel
Test plan for biblios:
1/ There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Delete"
- generating a list from a report
2/ On the "Batch record deletion" tool verify:
- biblios with issues cannot be deleted (checkbox disabled and line in
red).
- information is correct.
- sort functions work on each columns.
- the items, reserves and issues values are correct.
3/ After clicking on the "Delete selected recors" button, verify:
- reserves, items and biblio have successful been deleted.
- if an error occurs, the tool display an error message.
Test plan for authority:
1/ Generate a list of authid using a report:
2/ On the "Batch record deletion" tool verify:
- authorities are display with the summary.
- the count usage (used in X biblios) is correct.
3/ After clicking on the "Delete selected recors" button, verify:
- The authorities have successful been deleted.
- if an error occurs, the tool display an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
$results is 1 upon success or a hash on failure.
Rather than check %$results || %error, I changed it to
$results!=1 || %error. Strangely, this works without
messy warnings. I believe this resolves the problem Katrin
mentions in comment #43.
TEST PLAN
---------
0) Make sure the system preference patronimages is set to Allow.
1) Apply all the patches
2) Login to staff client
3) Tools -> Upload patron images (it's in the bottom left)
4) Choose an image file, browse for a photo, enter a patron #.
5) Click Upload
6) Click the card number link
-- the uploaded photo should be visible on the left side of
the screen.
7) Run koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Image uploaded without problems
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To satisfy qa tools, removing one tab somewhere..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Sometimes our QA tools are pretty annoying, in cases like this, when its a
tab in a comment, .. I don't think we really need to hold up a patch
set for it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing - this is a code-cleanup patch, so the purpose
of testing is to ensure that patron image upload functionality
still works. To test:
- Turn on the patronimages system preference
- Go to Tools | Upload patron images and import a suitable image
for a test patron.
- Bring up the test patron and verify that the image is attached.
- From the patron details page, upload a replacement image.
- Create a patron image ZIP file containing at least two images (
per the documentation of the patron image feature) and load it
via the patron image import tool.
- Verfiy that the test patrons now have images.
- Verify that tools/picture-upload.pl didn't report any errors
in the Apache error log.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- GetImportBiblios: prepare the query is useless here
- use Modern::Perl
- Remove useless indentation level in pl file and redirect to 404 if
required params are not given.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow up makes some corrections to the previously added files and
adds some functionality to the diff: A Javascript diff plugin highlights
the differences between the records in the two columns.
Corrections made: Converted tab indentation to spaces, corrected GPL
statement.
File organization: Moved showdiffmarc.pl and .tt to /tools/ to match the
location of the page with which it functions,
tools/manage-marc-import.pl. Corrected permissions on showdiffmarc.pl
accordingly.
Updates to the template: Added standard includes inclucing header menu
and breadcrumbs; converted custom layout to YUI Grid standard.
To test, follow the test plan previously defined:
- Stage a MARC record batch which contains at least one record match for
something already in your catalog.
- Locate the staged MARC record batch in Tools -> Manage staged records
and click to view the contents.
- Find the record which matched an existing record and click the "View"
link in the Diff column.
- The compare screen should include the header menu and breadcrumbs. The
differences between your staged file and the existing record should be
higlighted.
- You should be able to return to the MARC batch you were previously
viewing by following the link in the breadcrumbs or the link at the
bottom of the page.
- Confirm that the "About" page includes information about the new
JavaScript plugin on the Licenses tab.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I forgot to include these files in the last patch
new file: tools/showdiffmarc.pl
new file: koha-tmpl/intranet-tmpl/prog/en/modules/tools/showdiffmarc.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
New patch should apply correctly.
modified: C4/ImportBatch.pm
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11876 - Diff column is now displayed.
If a match is found, a 'View' link appears in the Diff column.
Old patch was not implementing datatables, and therefore was not compatible with this version of Koha.
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
modified: tools/batch_records_ajax.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
These patches have some issues but I'm going to submit a follow-up which
I think will address them all and offer some improvements as well.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[1] Routine add_cron_job was added in 2007 but has not been defined.
Parameter Recurring is not used.
[2] Made some changes to koha-conf.xml. Instead of an example to edit,
I replaced it by the SCRIPT_NONDEV_DIR install variable.
[3] SCRIPT_NONDEV_DIR had to be included in rewrite-config.pl and the
path had to be corrected for dev installs in Makefile.PL
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested single and dev install for supportdir change.
Compared installations with and without the patches for this report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At some stage the runreport.pl cronjob was changed to accept longopts, but the scheduler script wasn't changed along with it. This patch fixes the mismatch.
To test:
1. make sure that your user is not in at.deny, and (if applicable/necessary) is in at.allow
1.5 test this on a package install, sending mails will still not work for git installs, even with this patch.
Useful, but not required step: make sure email can be sent from your server, also helpful is access to the Koha user's mail box (to see the bounce messages)
2. create a saved sql report to run
3. Go to Tools -> Task Scheduler and schedule a job to be run, and results emailed to you
4. note that you do not (without the patch) get an email. Make a note of the command it reports it is going to run.
5. apply the patch
6. schedule another job, you will notice that the command to run the scheduled job is slightly changed compared to the one in step 4.
7. Receiving an email when your job runs means the patch worked. Seeing --format= and --to= in the command also means the patch worked, as this is the command that runreport.pl is expecting.
8. Run the koha QA test tool.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The line that changes is visible in the bottom section,
"Jobs already entered", with the corrected parameters and
path used. If you do not have the <supportdir> config
parameter set up in koha-conf.xml, it defaults to the
typical package path. If you have the parameter set up,
the path given matches what you tell it. Only tested in
git.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan
1/ run ./tools/export.pl
2/ notice an error like cannot open 0: No such file or directory at ./tools/export.pl line 209.
3/ apply patch
4/ run again
5/ no errors
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, adding an additional check.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, hides the borrowernumber from the list
of fields to edit and also brings back the list of fields
for the sample file in the documentation.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch remove borrowernumber from the borrower list fields and
display the field list in the notes.
Test plan:
- verify that the list of fields is displayed on the right (Notes).
- verify the borrowernumber is not displayed anymore in the field list.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Confirmed that this patch removes borrowernumber from list of default
values, and reintroduces missing list of CSV columns in the Notes field.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added server-side validation and feedback to Koha news.
TEST PLAN
---------
1) Log in to staff client as someone who can add news
2) Paste a variation of the ugly following URL into your
address bar:
https://demo.library-admin.kohasystem.ca/cgi-bin/koha/tools/koha-news.pl?op=add&lang=&branch=&title=&from=&to=&number=&new=
-- A blank news item is added without warning!
3) Apply patch
4) Repeat step 2
-- "ERROR: Required news title missing!" is displayed
and no blank news is added
5) run koha qa test tools
Followed test plan, Error message appears as expected, qa test tool: OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
1/ define/set up extended pattron attribute in administration module,
2/ using "Tools -> Import patrons", try to import some sample patron
record[s], having some arbitrary (non-empty) value assigned in
'pattron_attributes' CSV column for attribute defined in step 1/,
3/ observe that extended attribute defined in step 1/ was not imported
(not added to the database), without any warnings.
This patch restores a small code chunk which went AWOL somewhere around
commit b4158f2d24.
To test:
1/ apply patch & retest,
3/ ensure that this issue is no longer reproductible, and there are no
apparent regressions of any kind,
4/ make sure that the ability to specify default value for extended
attributes added in bug Bug 12716 is still working as intended
(= follow up the test plan for bug 12716).
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Patch fixes import of extended patron attributes.
Step 1-3 in test plan confirmed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Install two language variants (e.g. de-DE and de-CH)
- Create OPAC news for each of them
- Verify that they are displayed in OPAC as appropriate
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works ok, all installed languages now show up in the pull downs
and display for the selected language in the OPAC.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be helpful to be able to use the batch patron modification tool
to update city, state, zipcode, and country. This patch adds this
functionality.
This patch corrects an error in the batch modification script which
would have incorrectly marked first name as required if surname was
required.
This patch also converts the table sorting configuration to use table
header class names instead of index-based sorting for columns containing
dates.
To test, apply the patch and submit a batch of patrons to the batch
patron modification tool (Tools -> Batch patron modification).
In the list of patrons which will be modified you should see columns for
city, state, zipcode, and country. Table sorting should work correctly
without errors, including the registration and expiry date columns.
In the list of fields which can be batch modified you should see inputs
for city, state zipcode, and country. These fields should correctly
reflect mandatory/not mandatory based on the BorrowerMandatoryField
system preference.
Submit batch changes to a variety of fields and confirm that changes are
applied correctly. On the page of results the table should correctly
show all fields and be sorted correctly.
Signed-off-by: cachan <pierre.lorgue@ens-cachan.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The $lines_read++; was before the code which skipped empty
lines. By moving it after the next unless $barcode; code, the
$lines_read variable only counts potential barcodes, and does
not include empty lines.
TEST PLAN
---------
1) Apply patch.
2) Attempt a valid barcode file with empty lines.
-- The potential barcode count should exclude the empty lines.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Empty lines are now no longer counted as potential barcodes.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The inventory tool had no form of validating on what was assumed
to be a valid barcode number.
To solve this, an extra loop to read before processing was added.
This allows to validate length and content. By using a check
of \p{Print}, this includes Unicode characters such as umlauts,
but excludes unusual control characters.
The template was modified to accomodate validation messages
related to the length and content errors. Additionally, it says
how many "barcodes" were read. Barcodes are supposed to be on
separate lines.
TEST PLAN
---------
1) Attempt to select a file which does not contain barcodes and
is not a text file.
-- a horrible lack of validation and spamminess ensues.
2) Apply patch
3) Create three files.
a) One containing valid barcodes on each line
-- this file should trigger no errors. Attempt a valid
barcode with an umlaut.
b) A copy of the first with an extra line of >20 characters
(e.g. The Quick Red Fox Jumped Over The Brown Fence^A^B^C)
-- this file should trigger the singular error message case.
^A^B^C are actually CTRL-A,CTRL-B,CTRL-C, and it is left
as an exercise to the reader to add them to the line.
c) A copy of the second with the last line duplicated
-- this file should trigger the plural error message case.
4) Attempt each of the three files.
5) Run koha-qa tools.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I have a feeling that the column size could be better fetched from
Koha::Database. But it is an improvement in functionality signing off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Another thing for another day:
Empty lines are counted for the potential barcodes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected, tried with arab strings, umlauts and no regressions found.
This patch removes HTML code from batchMod.pl
To test:
1. Check no regressions on batchMod editor,
Go to Tools > Batch item modification,
put a know barcode on barcode list, press continue
2. Check new line on translation files, update
a language, look for 'Tag editor'
Fixed capitalisation
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Amended patch, a stupid mistake on line 198 of batchMod-edit.tt
- [% javascript %]
+ [% mv.javascript %]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
