This patch adds a new methods to be used on YAML-based sysprefs. The
idea is that we would use it instead of handling the YAML decoding
in-place everywhere we use YAML syprefs.
Ideally, we could even move pipe separated values sysprefs into YAML,
etc.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Context.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds 'cron' as a valid interface and sets it appropriately for
existing cron scripts.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds 'api' as a valid interface and sets it appropriately for
both the new REST api and previous /svc/ api's. Handling to keep the
interface of a logged in session is included such that if the OPAC or
Intranet use the API's internally via a Cookie we will maintain the
interface throughout the session.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.
A test for this is added to about.pl too, along with the right warning
messages in case of problems.
Tests are added for both invalid TZ and to make sure the warning is
raised.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/timezones.t
=> SUCCESS: All tests pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of Koha depends on the local timezone of the server, except for Koha::Database which support an ENV override with the key TZ.
We should take this a step further. We should not only accept the TZ environment variable for all of Koha, we should really be able to set the timezone in the koha conf file as well so we don't have to pass that environment variable to things like cronjobs and one-off scripts.
Test Plan:
1) Apply this patch
2) Set a timzone in your koha_conf file, that is *not* your local time zone
Available timzones are listed here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
3) Restart apache/plack
4) Perform some actions, check the timestamps in the database and in the
html output, note they are for the set timezone and not the local
timezone.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix a bug tranforming new local preference variable name in lowercase.
TO TEST:
1. Admin > System preferences > Local use
2. Button New preference. Fill variable field with 'TESTfoo'. Click
Save.
3. The new variable is named: 'testfoo'.
4. Apply the patch.
5. Button New preference. Fill variable field with 'TESTfoo2'. Click
Save.
6. The new variable is properly named: 'TESTfoo2'.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commands in the test plan are examples, and may need varying
depending on your installation. This was created as a result
of attempting to clean the installation process up. However,
I believe the redefine might exist normally too. I just didn't
check. This is tested on a Debian 8 box sudo apt-get update'd
fully.
TEST PLAN
---------
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
drop and recreate and empty db
> drop database koha_library;
> create database koha_library;
> quit
run the web installer, but DO NOT LOG IN!
*opening chrome to Staff Client URL*
check the error log
$ less ~/koha-dev/var/log/koha-error_log
...
[Fri Jun 09 13:08:52.793627 2017] [cgi:error] [pid 5802] [client 192.168.71.101:58169] AH01215: [Fri Jun 9 13:08:52 2017] CGI.pm: Subroutine multi_param redefined at /usr/share/perl5/CGI.pm line 419.
...
apply patch
empty error log
$ echo > ~/koha-dev/var/log/koha-error_log
refresh the installation login page
recheck the error log
$ less ~/koha-dev/var/log/koha-error_log
notice no reference to "Subroutine multi_param redefined"
run koha qa test tools
Notice that it is just a require CGI; and comment added.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add shibboleth parameter to POD of set_userenv.
Removed a 12th set_userenv parameter from Borrower_Discharge.t.
Replaced set_userenv call in PatronLists.t looking like a fortunate typo.
Test plan:
Run the two corrected tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Persona never really took off, and although many browsers currently
support it, very few services actually implement it.
This has lead to it's founders, Mozilla, to end the project. In their
own words:
=============================================================================
Persona is no longer actively developed by Mozilla. Mozilla has
committed to operational and security support of the persona.org
services until November 30th, 2016.
On November 30th, 2016, Mozilla will shut down the persona.org services.
Persona.org and related domains will be taken offline.
If you run a website that relies on Persona, you need to implement an
alternative login solution for your users before this date.
For more information, see this guide to migrating your site away from
Persona:
https://wiki.mozilla.org/Identity/Persona_Shutdown_Guidelines_for_Reliers
=============================================================================
Given the above, and that the Persona authentication methods as a whole
are no longer being actively maintained by anyone anywhere to ensure
ongoing security, we should deprecate the option from koha.
Test plan:
Apply this patch and make sure you do not find any references of Persona
Have a look at patches from bug 9587 and confirm that everything has
been reverted
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Code looks good to me.
Also ran several tests including: Auth.t, Auth_with_shibboleth.t.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hard to miss that one:
Template process failed: plugin error - Bareword "C4::Branch::onlymine" not allowed while "strict subs" in use at Koha/Template/Plugin/Branches.pm line 59.
Compilation failed in require at /usr/lib/perl5/Template/Plugins.pm line 206.
Removed OnlyMine from Plugin/Branches. Replaced by a template var in
cleanborrowers; it was used only once.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes an occurence of an unused var in Context.pm and
also prevents a warning if memcached_servers is not set:
Use of uninitialized value in split at /home/vagrant/kohaclone/Koha/Cache.pm line 91.
t also tidies small things.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Move C4::Context->read_config_file to Koha::Config
That permits to reuse it from Koha::Cache without needing C4::Context
(and introduce a circular deps).
TODO: Add decent POD to Koha::Config
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
MEMCACHED_SERVERS and MEMCACHED_NAMESPACE should be moved back to
koha-conf instead of an ENV var to let command line scripts use
the cache mechanism.
TODO:
- Add the entries to koha-conf.xml
- Remove occurrences of MEMCACHED_SERVERS in package, apache and plack files
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
s/Koha::Cache->get_instance/Koha::Caches->get_instance
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to define several namespaces for our cache system.
For instance sysprefs, koha conf (koha-conf.xml) and unit tests
should be defined in a separate namespace.
This will permit to
- launch the tests without interfering with other cache values
- and flush the sysprefs cache without flushing all other values
To do so, we need to store different Koha::Cache objects at a package
level. That's why this patch adds a new Koha::Caches module.
FIXME: There is an architecture problem here: the L1 cache should be
defined in Koha::Cache
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref is prefixed by 'http://', but it should not when the pref is
set to an empty string.
This will fix the bug raised on bug 14790 comment 14.
Test plan:
Empty OPACBaseURL and confirm that it's save as it in DB
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OPACBaseURL is saved up empty. Prefix http:// is not saved anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The marc subfield structure is currently cached using a global variable
of C4::Context. The infos are retrieved every time a new context is
created.
This patch suggests to use Koha::Cache instead.
To achieve this goal, a new subroutine is created
C4::Biblio::GetMarcSubfieldStructure, it will be called from code which
needs to get the marc subfield structure. GetMarcFromKohaField,
GetMarcSubfieldStructureFromKohaField, TransformKohaToMarc and
_get_inverted_marc_field_map are modified accordingly and the cache is cleared
when the table is updated (from the 3 pl scripts modified by this patch).
The caching done in C4::Context (marcfromkohafield) is removed.
Test plan:
Play with the marc subfield structure (in the administration module),
then add and edit records and make sure everything went fine.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Everything works as expected on my functional tests. I'm really happy to see the
patch introduces relevant tests for previously untested functions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These prefs do not need to be cached, a quick access to $ENV permit to
get the value.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
On debian Jessie, the CGI version is >= 4.08
Since this version, the param method raise a warning
"CGI::param called in list context".
Indeed, it can cause vulnerability if called in list context
https://metacpan.org/pod/CGI#Fetching-the-value-or-values-of-a-single-named-parameterhttp://blog.gerv.net/2014/10/new-class-of-vulnerability-in-perl-web-applications/
There is a long journey to get rid of these warnings.
First I suggest to redefine the multi_param method when the CGI version
installed is < 4.08, it will allow us to move the wrong ->param calls to
->multi_param without waiting for everybody to upgrade.
The different ways to call these 2 methods are:
my $foo = $cgi->param('foo'); # OK
my @foo = $cgi->param('foo'); # NOK, will raise the warning
my @foo = $cgi->multi_param('foo'); #OK
$template->param( foo => $cgi->param('foo') ); # NOK, will raise the warning
# and vulnerable
$template->param( foo => scalar $cgi->param('foo') ); # OK
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested a call to multi_param with CGI < 4.08.
With reference to the comments on Bugzilla, this workaround is arguable,
but provides a base to move to multi_param. If we come up with a better
solution, it should be easy to adjust.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Accessing to the cache for each call to C4::Context->preference might
have an impact on performances.
To avoid that this patch introduces a L1 cache (simple hashref). It will
be populated by accessing the L2 cache (Koha::Cache).
If a pref is retrieved 10x, the first one will get the value from the L2
cache, then the L1 cache will be check.
To do so we will need to clear the L1 cache every time a page is loaded.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Unless in t/db_dependent/Context.t where we want to test the cache
behaviors.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
At the moment, the sysprefs are only cache in the thread memory
executing the processus
When using Plack, that means we need to clear the syspref cache on each
page.
To avoid that, we can use Koha::Cache to cache the sysprefs correctly.
A big part of the authorship of this patch goes to Robin Sheat.
Test plan:
1/ Add/Update/Delete local use prefs
2/ Update pref values and confirm that the changes are correctly taken
into account
Signed-off-by: Chris <chrisc@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Tested with plack with syspref cache enabled, there is some time between setting the syspref and applying it, but it takes just one reload of page, it shouldn't be problem, should it?
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Tested with CGI and CGI + memcache; some small issues still remain,
but it would be better to deal with them in separate bug reports
if necessary
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Koha::Logger allows us to split up logging to separate files based on
the interface. However, right now the interface is limited to just
'opac' or 'intranet'.
We should extend this to allow the interface to also be set to 'sip'
for SIP server logging, and to 'commandline' for cronjobs and all other
command line scripts.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Does what it says on the tin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Happily this was only used for intranetdir.
It's time to remove it and replace existing calls.
I used the following commands to catch calls to C4::Context:
git grep 'C4::Context\->' | grep -v 'C4::Context->preference' | grep -v
'C4::Context->config' | grep -v 'C4::Context->userenv' | grep -v
'C4::Context->IsSuperLibrarian' | grep -v 'C4::Context->dbh' | grep -v
'C4::Context->set_preference' | grep -v '_syspref_cache' | grep -v
_userenv | grep -v 'C4::Context->interface' | grep -v
'C4::Context->Zconn' | grep -v 'C4::Context->queryparser' | grep -v
'C4::Context->tz' | grep -v 'C4::Context->boolean_preference' | grep -v
'C4::Context->memcached'
NOTE: I applied 14428, and then did what I suggested in comment #2.
Only intranetdir references appeared.
I applied this patch, and repeated.
Nothing appeared. This means the autoload references are
properly removed.
koha qa test tools complained about whitespace, I just fixed
those. Though, we may wish to perltidy
auth_fields_substructure.pl on another bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
1) git checkout -b bug_14425 origin/master
2) perldoc C4::Context
/IsSuperlibr
-- see it is bad.
3) apply patch
4) perldoc C4::Context
/IsSuperLibr
-- see it is fixed.
5) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix typo, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
% git grep -i IsSuperLibrarian|wc -l
55
% git grep IsSuperLibrarian|wc -l
55
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The current behaviour for C4::Context->preference when the DB is not still
populated with tables is to return undef. This is used by C4::Auth to identify
the need of running the installer.
This behaviour got broken by bug 13967, which lets DB errors to escalate and
thus Koha gets broken instead of prompting for install.
This patch wraps Koha::Config::Sysprefs->find inside an eval and sets undef if needed.
To test:
- In current master, drop the DB
- Load OPAC and Intranet
=> FAIL: notice an ugly software error.
- Apply the patch
- Load the OPAC
=> SUCCESS: Maintenance mode screen is shown
- Load Intranet
=> SUCCESS: You are prompted the DB credentials to run the web installer.
- Sign off :-D
Tomas
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When I merged 13967 into master (with 5010 already on it) I inadvertedly
removed a few lines that add a check for bad OPACBaseURL values.
While I don't agree with that check it should be discussed on a separate
bug anyway.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
System preferences should have a package based on Koha::Object to remove
the need for direct manipulation via SQL.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/sysprefs.t
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
