Currently when searching for a geographic authority record the search will fail if the record has a heading in a 78X field. The system tries to do a regex match against an undefined variable causing an error. This patch makes that regex match conditional on the variable being defined to allow the search to succeed.
Test plan:
1) Navigate to Authorities
2) In the search bar at the top of the page, click on the dropdown options and in the 'Authority type' field, select 'Geographic Name'
3) Click search
4) You should have a list of authorities
5) Click on any authority record and then click edit and select to edit the record
6) Click on the "7" button
7) Click on the green text next to the '781' field to get the list of fields
8) In field 'v' enter any string you like
9) Click save
10) Repeat steps 1-3, this time it should display an error message for an Unmatched [ in regex
11) Apply patch
12) restart_all
13) Refresh the page, the results should show and the string you entered in the 'v' field should display on the record you edited
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Serials.t .. 2/57 Use of uninitialized value in numeric gt (>) at /kohadevbox/koha/C4/Serials.pm line 2029.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Cannot determine authority type for record: 1709 at /kohadevbox/koha/Koha/SearchEngine/Elasticsearch.pm line 589.
Use of uninitialized value $subfields in pattern match (m//) at /kohadevbox/koha/C4/Heading/MARC21.pm line 412.
Use of uninitialized value $subfields in pattern match (m//) at /kohadevbox/koha/C4/Heading/MARC21.pm line 448.
This change removes the 2 "Use of uninitialized value $subfields in
pattern match (m//)" warnings
The warnings are gnerated because the subfields for headings are hardcoded variables in C4::Heading::MARC21
for any genuine authority record we should receive the correct list of subfields. The tests in this case are
mocking a new authtype, and so do not find the correct subfields. Skipping the generation here silences the
warnings and will prevent user defined types from throwing errors as well.
NOTE: Koha allows the user to define their own authority types, however, we have various features hardcoded
that will prevent them from working as expected
WNC amended commit message
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch also renames StaffLoginBranchBasedOnIP to
StaffLoginLibraryBasedOnIP to be consistent with our terminology
guidelines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch sets AutoLocation to be called StaffLoginRestrictBranchByIP.
The new name is chosen to reflect the new pref StaffLoginBranchBasedOnIP.
Also this patch corrects the order of sysprefs in installer file.
To test:
Follow test plans on bug 36665 and bug 35890 and confirm that the preferences
continue to work as expected
Confirm the descriptions of the prefs in the staff interface match the behaviors expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This adds a sort based on branchcode, it's a fallback for an edge case that should be rare
so I think is acceptable, as long as documented.
I added test coverage, but it may no longer be possible to encounter this scenario.
System preference descriptions are updated as well.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new system preference StaffLoginBranchBasedOnIP which restores the behaviour before bug 35918
of using the current IP to determine the user's logged in branchcode
To test:
1 - Get your current ip
2 - Set that IP for a library in the administration section
3 - Find a user account assigned to a different library that can login to staff side
4 - Login to staff as that user, select 'My library'
5 - You are logged in to the user's branch
6 - Apply patch, restart all
7 - Log out and back in, selecting 'My library'
8 - You are logged in to the user's branch
9 - Enable new system preference StaffLoginBranchBasedOnIP
9 - Log out and back in, selecting a different branch, noting the new warning below the library selection
10 - You are logged in to the branch with the matching IP
11 - Log out and back in, selecting 'My library'
10 - You are logged in to the branch with the matching IP
11 - Change your logged in branch
12 - Verify the selection sticks and you can perform staff actions in the chosen branch
13 - Change the IP of the library to one that doesn't match yours
14 - Verify you can log out and log back in and that selected branch is respected when your IP doesn't match library IP
Signed-off-by: Kristi Krueger <KKRUEGER@cuyahogalibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Look at the patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This only applies to 'local' preferences.
Test plan (first without this patch):
Add a local pref. Delete it. Ask value on commandline with:
* perl -MC4::Context -e"print C4::Context->preference('YOUR_PREF')"
* Did you replace YOUR_PREF :)
Now repeat with this patch. And verify fix (no value now).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The userenv (logged in user's info) are stored in
$C4::Context->context->{activeuser}, which persists in plack worker's
memory.
It's really bad in theory as we are not cleaning it before or after the
HTTP request, but only when set_userenv is called (what we are doing
commonly in C4::Auth::get_template_and_user).
If C4::Context->userenv is called before set_userenv we should get undef,
not the userenv from the previous request!
In practice this should not be a problem, but well... who really knows?
This patch suggests to have a middleware to deal with removing the
userenv at the beginning of each request (maybe it should be after, right? - FIXME).
To test:
1 - Edit /etc/koha/sites/kohadev/koha-conf.xml to set <plack_workers>1</plack_workers>
2 - Edit about.pl and add a line after: CGI->new:
warn Data::Dumper::Dumper( C4::Cointext->userenv() );
3 - tail -f /var/log/koha/kohadev/*.log
4 - View about.pl in staff interface, should get a "somethign's wrong" warning
5 - Reload, you get current user info
6 - Open an incognito tab, sign in as a different user and click some stuff
7 - Reload about.pl in other window
8 - You get the opac user info
9 - Apply patch
10 - Edit /etc/koha/sites/kohadev/plack.psgi and add the middleware after "RealIP":
enable "+Koha::Middleware::UserEnv";
11 - Restart all
12 - Reload about.pl - you get a "Something's wrong" warning
13 - Click things in opac on incognito window
14 - Reload about.pl - only "Something's wrong" - you no longer see any user info
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We can get into a scenario what a user cannot stay logged in for more than a single page load.
If AutoLocation is enabled with branch IP addresses being set to a space, you will be logged out with every page load.
Test Plan:
1) Set your branch ip to a space
2) Enable AutoLocation
3) Restart all the things!
4) Log out
5) Log in
6) Browse to another page
7) You are logged out
8) Apply patch
9) Repeat 1-6
10) You are not logged out!
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the test files to correctly create authorities and/or correctly
mock the needed data for authorities.
the tests in t/db_dependent/Authority/Merge.t cover the case of 'Default' authorities
which don't have valid headings - so I had to add handling for blanking the heading field
when Default type is used.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
ILS-DI GetRecords generates bad encoding of MARCXML for UNIMARC, like OAI in Bug 34467
Enable ILS-DI and display a record with :
<opac url>/cgi-bin/koha/ilsdi.pl?service=GetRecords&id=<biblionumber>
Well-known issue, fixed
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a new heading field containing the display form of the authority record
NOTE: If trying to save an auhority in the 'DEFAULT' framework, you will get an error, you should not be
using DEFAULT for authorities and we should remove from the list on another bug
To test:
1 - Apply patches
2 - Update database
3 - Restart all
4 - Create a new authority, save.
5 - Do this for various types
6 - View the db records:
SELECT * FROM auth_header\G
7 - Note new heading field is populated correctly
8 - Edit your new authorities
9 - Confirm the heading field is updated correctly
10 - Import some authorities and confirm heading generated correctly
11 - Import auth via Z39.50 and confirm heading generated correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Because of the way Koha::Logger has been used to log to different categories based on the interface and caller, it can be extremely hard to log all of a particular log statement to one place.
For custom report runs, the category is plack-intranet.C4::Reports::Guided when run from the web interface, cron.C4::Reports::Guided when run from runreport.pl, and plack-intranet.C4::Auth when run from svc/report.
We should add a more standardized report run log, both with and without the full query, so that administrators can log all report runs to a centralized location. If an administrator were to need the "point of entry" for reports, it is easy to include via parameters in PatternLayout.
Test Plan:
1) Apply this patch
2) Modify your log4perl file, add the following:
log4perl.logger.reports.execute.time = INFO, REPORTTIME
log4perl.appender.REPORTTIME=Log::Log4perl::Appender::File
log4perl.appender.REPORTTIME.filename=/tmp/report-time.log
log4perl.appender.REPORTTIME.mode=append
log4perl.appender.REPORTTIME.layout=PatternLayout
log4perl.appender.REPORTTIME.layout.ConversionPattern=[%d] [%p] [%P] %m%n
log4perl.appender.REPORTTIME.utf8=1
log4perl.logger.reports.execute.query = INFO, REPORTQUERY
log4perl.appender.REPORTQUERY=Log::Log4perl::Appender::File
log4perl.appender.REPORTQUERY.filename=/tmp/report-query.log
log4perl.appender.REPORTQUERY.mode=append
log4perl.appender.REPORTQUERY.layout=PatternLayout
log4perl.appender.REPORTQUERY.layout.ConversionPattern=[%d] [%p] [%P] %m%n
log4perl.appender.REPORTQUERY.utf8=1
3) Restart all the things!
4) Run a report somehow:
CLI: ./misc/cronjobs/runreport.pl 1
API: /cgi-bin/koha/svc/report?id=1
Web: /cgi-bin/koha/reports/guided_reports.pl?reports=1&phase=Run this report
5) Note the report runs are logged to /tmp/report-time.log and /tmp/report-query.log
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adds a search option to the advanced search in the
serials module that allows to limit search on subscriptions
with routing lists.
Test plan:
1. Apply this patch
2. Create two subscriptions, one with a routing list and one without
3. Navigate to Serials home and tick the checkbox labeled "Search routing lists only:"
4. Confirm that the only search result to appear is the subscription you added the routing list to
5. Run unit tests: prove t/db_dependent/Serials.t
Sponsored by: Bibliotheksservice-Zentrum Baden-Wuerttemberg
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Perltidied changes to make QA test tools pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When sending a fee paid message to SIP2 with an unknown patron id it will respond with an empty response followed by dropping the connection to a client.
Test plan:
a) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 124447FT00USDBV0.01|AO|AA2352900100046|ACterm1|
Use of uninitialized value $data in concatenation (.) or string at /usr/share/koha/bin/sip_cli_emulator.pl line 355, <GEN0> chunk 1.
READ:
b) apply patch
c) perl /usr/share/koha/bin/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL --patron 2352900100046 -m fee_paid --fee-type FT --fee-amount 0.01
Output:
Trying 'fee_paid'
SEND: 3720240423 125602FT00USDBV0.01|AO|AA2352900100046|ACterm1|
READ: 38N20240423 125602AO|AA2352900100046|AFInvalid patron barcode.|
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the header set into Koha::Email->create and passes the
template_id in a few additional locations to ensure we catch more cases.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
It can be useful to know exactly what template was used to generate a notice. To further this end, it would be useful be able to send the letter id as part of any emails sent out if there is a letter template associated with the message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Generate an email notice like a checkout notice
4) Inspect the email headers, note the new X-Koha-Template-Id and
X-Koha-Message-Id headers!
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
34. Prove t/db_dependent/Circulation.t
35. Prove t/db_dependent/Koha/Holds.t
--> Tests pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the changed code to set the logged in librarian as
the person who resolved the return claim at checkin/checkout action.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The new logic in AddReturn was flawed, we were missing return messages
due to moving the if statement too high and catching more code than
intended.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Configure Claims returned
1. Go to Administration > Authorized Values > LOST
2. Add a new authorized value with value:6 and description:Claims returned
3. Go to Administration > System Preferences
4. Set ClaimReturnedLostValue to 6 and save
2. Check out an item to a patron.
1. Mark the item as claim returned
2. Check the item in.
3. A message stating that the item has been claimed as returned pops up with
an option to resolve.
4. Resolve the claim.
3. Check out the item to the patron again.
1. Mark the item as claim returned.
2. Check out the item to a new patron. Select “Yes, check out”
3. Go back to the previous patron. Notice that their claim was not resolved.
4. Apply the patch.
1. Updatedatabase
2. restart_all
3. Go to the system preferences and set the system preference
‘AutoClaimReturnStatusOnCheckin’ to ‘Returned by patron’
4. Set ‘AutoClaimReturnStatusOnCheckout’ to ‘Found in library’
5. Redo step 2
1. When checking the claim returned item in you will now see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Returned by patron’
6. Redo step 3
1. Upon checking the item out to another patron you will see a message that
says “The previously claimed returned item has been found, automatically
resolving the associated claim.”
2. View the previous patron. Their claim has automatically been resolved
with a status of ‘Found in library’.
7. Sign off and have a wonderful day!
Sponsored-by: Altadena Library District
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Run the update_totalissues cron, the holds queue is updated.
2. APPLY PATCH, restart services
3. Run update_totalissues cron again, this time the holds queue should always be skipped.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable HoldsLog
5) Perform various hold related actions
6) Observe the diff column is populated by a JSON string
of the diff format generated by Struct::Diff
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
That did refer to our aqorders.purchaseordernumber..
Test plan:
Git grep for GetParcels.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch moves the language selection into GetPreparedLetter, drops
the interface check step and ensures the default template always uses
the default include language as per the OPACLanguages settings.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This restores the final fallback to 'en' as mentioned by Jonathan
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch set the language used in slips folloinw this logic:
--> uses patron's preferred language
--> if patron's preferred language is 'default', use the interface language
--> if there is no interface (for overdue_notices for example), use the first language in 'language' system preference
To Test:
1. Install the other language (i used fr-CA here)
1.1.
gulp po:update fr-CA
./misc/translator/translate install fr-CA
1.2. In Administration > Global system preferences, search for language and check the added language
2. Create a manual invoice in a patron's account and pay it
3. From the Transactions tab, click 'Print' next to the payment line
--> On the printed slip, there's the word 'Payment' in English (OK)
4. Switch interface to other language
5. Redo step 3
--> On the printed slip, the word 'Payment' is still in English (not ok)
6. In Administration > Global system preferences, enable TranslateNotices
7. Go to Tools > Notices and slips > ACCOUNT_CREDIT and copy the content of the letter into all the languages
8. Redo step 3 (you should still be in the other language interface)
--> On the printed slip, the word 'Payment' is still in English (not ok)
9. Edit the patron's account and change the preferred language to the other language
10. Redo step 3
--> On the printed slip, the word 'Payment' is in the other language (Paiement) (OK)
11. Apply the patch
12. Reset config
12.1. Edit the patron's account and change back the preferred language to 'default'
12.2. In Administration > Global system preferences, disable TranslateNotices
13. Redo step 3 (you should still be in the other language interface)
--> On the printed slip, the word 'Payment' is in the other language (Paiement)
14. Switch interface to the english language
15. Redo step 3
--> On the printed slip, the word 'Payment' is in English
16. In Administration > Global system preferences, enable TranslateNotices
17. Edit the patron's account and change the preferred language to the other language
18. Redo step 3
--> On the printed slip, the word 'Payment' is in the other language (Paiement)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add an unallocated option to CreateQueue and pass through as needed
Avoid deletion of the tmp_holdsqueue, and only check holds
and items that are not currently matched
A future hold with a higher priority will still fail here - because the
item may already be assigned, but on next change to the biblio it would
be corrected
To test:
1) Apply both patches
2) Enable RealTimeHoldsQueue and set HoldsQueueSkipClosed to "open"
3) Add a holiday to the calendar for all libraries for today, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Holiday repeated every same day of the week"
-- Click "Copy to all libraries". Hit "Save.
4) Place a biblio-level hold on a biblio record and set the pickup location to a library that has available copies, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=76&borrowernumber=51
-- Click the first "Place hold" button to place the biblio-level hold.
5) Verify that that hold got added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
6) Place a biblio-level hold on a biblio record where there are no other holds and copies are available at another location, but not the pickup location, visit:
-- /cgi-bin/koha/reserve/request.pl?biblionumber=437&borrowernumber=51
-- On the "pickup at" dropdown, pick something else other than "Centerville", e.g. "Fairfield".
-- Click the first "Place hold" button to place the biblio-level hold.
7) Check the holds queue again, notice that this 2nd hold was not added to the queue:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
8) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
9) Notice nothing changed in the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
10) Remove the holiday we created previously, visit:
/cgi-bin/koha/tools/holidays.pl
-- Click today's day on the calendar and pick "Delete this holiday"
-- Click "Copy to all libraries". Hit "Save.
11) Run the updated cronscript:
perl misc/cronjobs/holds/build_holds_queue.pl --force --unallocated
12) Confirm the second hold is added to the holds queue, visit:
/cgi-bin/koha/circ/view_holdsqueue.pl?branchlimit=&itemtypeslimit=&ccodeslimit=&locationslimit=&run_report=1
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This new feature allows to manage facets for Elasticsearch from the
administration page.
Prior to this the facet fields were hardcoded in the codebase.
Librarians can then add/remove facet fields and modify their label.
Test plan:
1. Create a new search field and set it a label different than its name.
2. Save
3. Go the bibliographic mapping tab
4. Add 1+ mapping for this search field (Searchable and facetable must be "Yes")
5. Add, reorder, remove new facets
6. Save and reindex your records
7. Search and notice the new facet list
QA: There are several wrong things in this area (ES + facets code,
everything, pm, pl, tt AND on this administration page). I have done my
best to clean the code as much as I could and keep the code cleaner
after than before. But there are still a lot to do.
There are still inconsistencies on this page (like we need to save to
see the changes applied to the other tables), but this is clearly out of
the scope of this bug report.
Another enhancement would be to move the facet list to a different DB
table, that could bring more flexibility:
* display or not (could be opac/staff/both/none)
* define the size per field (number of facet to display)
* order: move search_field.facet_order to this new table.
But, again, it's a lot more work.
More work is done in this area, please see related bug reports.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Check language dropdowns in advanced search, notice localized
names of the languages are shown first in the menus, then the
selected ui language translations if available or the english translation
2. Apply patch
3. Check language dropdowns, notice the selected ui language's
translations are shown first for the languages (if missing, english
translation), then the localized
language's name.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the ability to skip forward issues when receiving and generating the next issue
from both the serial receive page and serial collection page.
To test:
1. Apply patch.
2. Set up a subscription for a bib record.
3. Go to Serials -> Search your subscription -> Serial receive
4. Note that below last expected issue there will be checkbox to toggle a field to
specify how many issues to skip when recieving and generating the next.
5. On serials-collection page there is also a button 'Skip issues and generate next'.
When pressed will open a modal promting how many issues to skip.
6. Generate issues with different values and make sure the correct issue is generated.
Sponsored-by: Lund University Library
Sponsored-by: Bibliotek Mellansjö, Sweden
Co-authored-by: Johan Sahlberg <johan.sahlberg@tidaholm.se>
Signed-off-by: Marie Hedbom <marie.hedbom@musikverket.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Now both AddBiblio and ModBiblio will insert 005 if not present.
Test plan:
Run t/db_dependent/Biblio.t
Add biblio record via acquistion order. Check 005 in the table
biblio_metadata.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We need to:
[1] Remove obsolete framework parameters if any (yes there are).
[2] Check scalar context calls if any (most probably not).
Ad 1:
How to find them? Git grep and look at each hit. You will need the -C
parameter to add a few context lines around the call even.
Found one in C4/Biblio.pm and six in Suggestions.t with ''.
Found one in C4/Items on a second line. Similar one in Koha/EDI.
Note: sub receipt_items in EDI has no unit tests yet.
Also did a few git searches like:
git grep GetMarcFromKohaField | grep -v -P "GetMarcFromKohaField.*;"| grep -P "GetMarcFromKohaField\s*\("
Note: Seeing still three lines; they are all fine. Last line comes from
testing to trigger the warn.
Ad 2:
Have been looking at each git grep line and did not spot any
scalar context call. Before this report, we had an example in
POD and the Biblio test only.
Try to find them by performing smarter git searches?
Did look again at results for:
git grep GetMarcFromKohaField | grep -v -P "\)\s*=\s*&?(C4::Biblio::)?GetMarcFromKohaField" | grep -v -P "use "
The tests from this grep are included in the last test plan line.
Test plan:
Read the patch.
Run t/db_dependent/Biblio/TransformHtmlToMarc.t
Run t/db_dependent/Items.t
Run t/db_dependent/Suggestions.t
Run prove t/Biblio2.t t/db_dependent/Biblio.t t/db_dependent/Filter_MARC_ViewPolicy.t t/db_dependent/Koha/Authorities.t t/db_dependent/Koha/Biblio/Metadata.t t/db_dependent/Koha/Filter/EmbedItemsAvailability.t t/db_dependent/Koha/SearchEngine/Search.t t/db_dependent/XISBN.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
