Removing the manual transfer and rightaway doing the Reserve
transfer. One test description was misleading too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
34. Prove t/db_dependent/Circulation.t
35. Prove t/db_dependent/Koha/Holds.t
--> Tests pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch further unit tests highlighting possible issues
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds unit tests that test the functionality more specifically
and adds a few notes/fixme for things we need to consider here
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Add unit tests for new logic introduced to C4::Circulation::AddReturn
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the unit tests for the new system preferences that will
automatically change an items lost status to an authorised value defined
in these preferences on payment or write off of outstanding balance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We now require pickup_library_id and so need to update the unit tests to
reflect that for our sample bookings
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Running either t/db_dependent/Circulation.t or t/db_dependent/Circulation/dateexpiry.t
cause following error to be dispalyed:
You are creating a DateTime object with a far future year (9999) and a time
zone (Europe/Helsinki). If the time zone you specified has future DST changes
this will be very slow.
Smallest allowed value is 4999, so we need to use that rather than 9999 in tests.
To test prove t/db_dependent/Circulation.t and t/db_dependent/Circulation/dateexpiry.t.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch, updatedatabase & schema, restart all Services
2. Go to Administration > Table setting. Find the holdings table ( Catalog > holdings_table ) and turn the local use column on.
3. Go to an item record and notice the column 'Local uses'
4. Turn the system preference RecordLocalUseOnReturn Off.
5. Check in an item that is not checkout out. No local use should be recorded for the item.
6. Turn RecordLocalUseOnReturn on and check in an item that is not checked out. Local use on that item should increment by 1.
7. Create a statistical patron and check an item out to them. Local use should increment by 1.
8. Go to /api/v1/items?external_id={barcode} and make sure the numbers for localuse look correct.
To test maintainence script:
1. Without the patch, have RecordLocalUseOnReturn on.
2. Check in some items to record localuse in the stats table. Keep note of those stats.
3. Apply the patches, updatedatabase.
4. Run the maintenance script, perl update_localuse_from_statistics.pl
5. Now check that items.localuse is congruent with what is in the stats table
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Set TrackLastPatronActivityTriggers to at least "Checking out an item"
2) Run tests in t/db_dependent/Circulation.t and verify that
failes with "Invalid value passed, borrowers.updated_on..."
3) Apply patch
4) Run Circulatoint.t tests again and verify that no longer
produces this error
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Koha/Illrequests.pm -> Koha/ILL/Requests.pm
Merged:
t/db_dependent/Koha/Illrequests.t
t/db_dependent/Illrequests.t
Into:
t/db_dependent/Koha/ILL/Requests.t
ILL classes file structure is, for the most part, around 7 years old and doesn't follow a strict logic. It's so confusing that some test files exist redundantly.
This housekeeping should help future work in regards to ISO18626 to add Koha as a supplying agency instead of just requesting agency, as is now.
It should also help future housekeeping of moving backend related logic out of the Illrequest.pm into Illbackend.pm (now ILL/Request.pm and ILL/Backend.pm as of this patchset).
It should also help in structuring the addition of a master generic form (see bug 35570)
This patchset will require existing backends to be updated to match the new class names and structure, if they invoke them.
Test plan, k-t-d, run tests:
prove t/db_dependent/api/v1/ill_*
prove t/db_dependent/Koha/ILL/*
Test plan, k-t-d, manual:
1) Install FreeForm, enable ILL module, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) You'll have to switch the FreeForm repo to the one compatible with this work, like:
cd /kohadevbox/koha/Koha/Illbackends/FreeForm
git checkout reorganize_ILL
3) Do some generic ILL testing:
3.1) Create a request
3.2) Add a comment to a request
3.3) Edit a request
3.4) Edit a request's item metadata
3.5) Confirm a request
3.6) List requests
3.7) Filter requests list using left side filters
4) Install a metadata enrichment plugin:
https://github.com/PTFS-Europe/koha-plugin-api-pubmed
4.1) Create an ILL batch and insert a pubmedid like 123
4.2) Add the request and finish batch
5) Verify all of the above works as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Before this patch we get all holds on a record and see if we can fill them with available items.
This means we check to fill holds that the item in questoion may not be able to fill, especially
in the case where no holds are allowed on the item type, this is wrong
To test:
1 - Find or create a biblio with two items of different item types
2 - Make sure one item type allows holds, and the other has:
"Default holds policy by item type"
Set to "No holds allowed"
3 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
4 - Check out the unholdable item to a patron
5 - Set a hold for a different patron on the next available item
6 - Confirm the checked out item can be renewed (don't renew, just view the checkouts page)
7 - Checkout the other item to a third patron
8 - Confirm the first item can still be renewed
9 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Allow"
10 - Confirm the item cannot be renewed now
11 - Apply patch, restart all
12 - Confirm the item can be renewed
13 - Set the item type to a type that allows holds
14 - Confirm the item can no longer be renewed
15 - Restore the item type
16 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
17 - Confirm the item can be renewed
18 - Check in the item from the third patron
19 - Confirm the item can still be renewed
20 - prove -v t/db_dependent/Circulation.t - test still pass
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Whilst writing the test, I found a minor flaw in the logic and fixed
that in CanBookBeIssued at the same time.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a unit test for error precidence where autorenewals is
involved.
It is not comprehensive however, and I'm a little confused by the logic
around cron vs non-cron handling...
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a desire for auto_renewals to treat the final renewal differently. We would like to notify the patron of the final renewal - but not again when the next renewal fails. This patch adds the new return value and tests.
To test:
prove -v t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
prove t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
issue_4 is an auto_renew issue, rename to auto_renew_issue
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change fixes GetSoonestRenewDate so that it returns the soonest
renew date as calculated using "No Renewal Before" and "NoRenewalBeforePrecision".
In the past, it would only return the soonest renew date if "$now" was
lesser than it, which would typically only happen when using an "exact"
precision rather than a "date" precision.
Test plan:
0. Apply the patch
1. prove t/db_dependent/Circulation.t
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Removed skip_record_index => 1 from automatic_renewals.pl. See BZ.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Our consistency improvement to the AddIssue return in bug 23336
highlighted a bad test assumption. The 'Reinsert the original issue'
line was silently failing and as such the subsequent test lines were
actually resulting in a renewal (which previous to this patchset
returned an empty return that happened to match the empty return of an
issue failure)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a test that a pending stock rotation transfer is initiated on
checkin, as well as updating the defaults for creating transfer objects
To test:
prove -v t/db_dependent/Circulation.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
After the patch we fail on renewing a not for loan item with an item
level hold.
I don't find justification for why this should be renewable, so I just
change the test expectation
This needs another QA eye
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See bug 31447, we don't want the tests to deal with potential failures
because of some item groups.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: Kyle, stop impersonating John Doe
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the errant call to AddIssue that passes a patron
object instread of a patron hash to AddIssue in the tests and also adds
lengthunit to squash a pair of warnings.
However, it doesn't resolve the failing test.. still somthing going on
there.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31095: Fix Circulation.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace GetDebarments with $patron->restrictions.
Test plan
1. Run test prior to patch - all should pass
2. Run test after patch - all should pass
3. Confirm no tests were removed as part of the patch
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently this syspref only bokcs the literal 'return' from a patron, i.e. the checkin
It still processes transfers, refunds lost items, updates NotForLoan status etc.
We should block all of these things
To test:
1 - Set BlockReturnOfWithdrawn to block
2 - Set an item as lost and withdrawn
3 - Check it in
4 - Item is found
5 - Apply patch
6 - Repeat 1-3
7 - Checkin is blocked, item still lost
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Highlighted by Bug 32030: fix test builder for boolean
# Failed test 'Checkouts with auto-renewal can be renewed earliest on due date if no renewalbefore'
# at t/db_dependent/Circulation.t line 343.
# got: '2022-11-18T14:16:12'
# expected: '2022-12-02T00:00:00'
# Failed test 'Checkouts with auto-renewal can be renewed earliest on due date if no renewalbefore'
# at t/db_dependent/Circulation.t line 349.
# got: '2022-11-18T14:16:12'
# expected: '2022-12-02T23:59:00'
# Looks like you failed 2 tests of 5
We were reaching return $now
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test prove t/db_dependent/Circulation.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
