If the log viewer is being used to track patron-related data the
patron-related JavaScript file should be included.
To test, apply the patch and open a patron record. In the left-hand
sidebar choose Modification Log. Test the patron image edit/replace
process from the patron image in the sidebar and confirm that it works
correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This follow-up modifies JavaScript so that the confirmation dialog is
triggered when deleting a patron image from the modal window.
The CSS is modified to improve the alignment of patron image and edit
button.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies an include file so that it is possible with edit a
patron's image on any patron-related page which uses that include.
To test you must have the patronimages system preference enabled.
Apply the patch and open any patron record for viewing.
- Hover the mouse over the patron image.
- If the patron has a previously-defined patron image, should you see
an "Edit" button appear. Clicking the button should display a modal
dialog titled "Edit patron image." Test that the "Upload,"
"Delete," and "Cancel" buttons work correctly.
- If a patron has no patron image defined, you should see an "Add"
button appear. Clicking the button should display a modal
dialog titled "Edit patron image." Test that the "Upload,"
"Delete," and "Cancel" buttons work correctly.
This process should work from any page which shows the patron sidebar:
Check out, Details, Fines, Routing lists, Circulation history, etc.
Patch works as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The test should check $4 or $e for fields ne 111,711.
And should check $4 or $j for 111,711.
Test plan:
Edit a record, add a meeting in 711 without $4 but with $j.
Without this patch the term is not visible, with this patch it is.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a link to the Mana KB configuration page to the
administration sidebar menu.
To test, apply the patch and:
- Log in to the staff client as a user who lacks permission to manage
Mana KB.
- Go to an Administration page which shows the sidebar, like
Libraries or Patron categories. There should be no link to Mana KB
in the left-hand sidebar.
- Log in to the staff client as a user who has permission to manage
Mana KB.
- Go to Administration -> Mana KB
- In the sidebar menu you should see a link to Mana KB and it
should be bold.
- Navigate to another Administration page which shows the sidebar.
The Mana KB link should not be highlighted.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a separate permission for managing Mana KB.
To test, apply the patch and update the database.
- Open the permissions page for a patron with staff client privileges
- Confirm that there is a "Manage Mana KB content sharing
(manage_mana)" permission.
- Leaving this new permission unchecked, log into the staff client
with as that patron and go to the Administration home page.
- The "Using Mana-KB" link should not appear.
- Navigate directly to /cgi-bin/koha/admin/share_content.pl. You
should get a "permission denied" message.
- Modify the patron's permissions to grant them access to Mana KB.
- Confirm that the link now appears on the Administration home
page and that the user can access the page.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes language changes to the Mana KB administration
template, and corresponding language changes to the Web Services
preference file.
Some markup errors have been fixed:
- Correct title and breadcrumbs, copied and pasted from another
template
- Add ids to form fields to match their label "for" attributes
- Make <input>s self-closing
- Correct class names on alert dialogs
- Wrap text in JavaScript with _() to make it translatable
Also changed: Some language revisions to the Mana dialogs on the
Administration home page.
To test, apply the patch and go to Administration -> Share content with
Mana KB.
Test the process for enabling and configuring Mana KB. Check that
forms work correctly and that the language of instructions and labels
reads well.
Go to Administration -> System preferences -> Web services, and confirm
that the language changes to the Mana KB preference look good.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects the way subscription edit menu items are displayed
according to the user's permissions settings.
To test, apply the patch and log in to the staff client as a user who
has permission to create, edit, and delete subscriptions.
- Locate an subscription and view the details for it.
- Confirm that each "Edit" menu item works correctly.
- Repeat the process when logged in as a user with varying combinations
of create, edit, and delete permissions.
- Test as a user limited by IndependentBranches.
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Catalog an item under LCC with callnumber GT95
2 - cn_sort should calculate as GT0095
3 - Go to inventory tool
4 - Enter a range that should have your item e.g LC GT90 to GT100
5 - Item is not returned
6 - Apply patch
7 - Item should be returned
8 - Verify things otherwise work as expected
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a couple of corrections to the selectors used by
hcsticky in targeting the position of the floating toolbar. These
changes were made necessary by changes made in recently-pushed patches.
To test, confirm that these two pages work correctly:
- Acquisitions -> Vendor -> View basket
- Patrons -> New patron
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch replaces the fixFloat jQuery plugin with a new one: HC-sticky
(https://github.com/somewebmedia/hc-sticky). This plugin provides the
same functionality without the page-reflow problems fixFloat suffers
from.
To test, apply the patch and regenerate the staff client CSS. Test the
behavior of the floating toolbar on these pages:
- Acquisitions -> Vendor -> Vendor details
- Acquisitions -> Vendor -> View basket
- On both these pages, test toolbar behavior before and after
expanding the "Orders search" options at the top of the page.
- Administration -> System preferences
- Authorities -> Create or edit an authority
- Catalog -> Advanced search
- Search results
- Catalog -> Item search
- Cataloging -> Add or edit a record
- Open the plugin window for the 008 field
- Tools -> Label creator -> New label batch -> Add items -> Search ->
Results
- Patrons -> New patron
- Test before and after expanding the patron search options at the
top of the page
- Test editing a patron too
- Tools -> Automatic item modifications by age -> Edit
- Tools -> Notices & slips -> Edit
- Lists -> View list
Check that the About page has been updated with information about the
plugin.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Same as Bug 17780 but in value builders.
Select2 (Bug 13501) introduced divs and inputs that broke some
assumptions about the expected HTML structure. This patch checks if
input has name attribute, because some inputs in Select2 have not.
It brakes value builders marc21_linking_section.tt and
unimarc_field_4XX.tt.
Test plan :
1) On a MARC21 database
2) Define 774$0 as a regular subfield
3) Define 774$4 with an authorised value category
4) Define 774$t with value builder marc21_linking_section
5) Create a new record
6) Use value builder in 774$t
7) Search for a record and click choose
8) Without patch : a popup window does not close and show a blank
screen
9) With patch : popup windows get close and you see in field 774 $0 and
$t field with values
10) Same tests with a UNIMARC database on field 461 with value builder
unimarc_field_4XX.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with MARC21
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Test:
1) Apply Patch.
2) Go to a patron checkout screen (circulation.pl).
3) Note there are no clear screen buttons in the upper right corner of
the checkout window.
4) Turn on the DisplayClearScreenButton preference.
5) Go back to patron checkout. Note the clear screen button and the new
printer icon next to it.
6) Click the printer icon. This will trigger a print slip function, and
close the patron screen.
7) Try to arrow back to the previous screen. Should go to main menu and
not the patron screen, just like the orginal close button (X).
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the table of libraries
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Libraries
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the libraries table. Confirm that these
changes are reflected in libraries administration.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the table of patron categories
in administration. No new defaults for the table are defined.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Patron categoires.
- Test that the "Column visibility" button works to show and hide
columns. The "actions" column should be excluded.
- Test that export options (Excel, CSV, etc) exclude the "actions"
column.
- Go to Administration -> Columns settings and edit the default
configuration of the patron categories table. Confirm that these
changes are reflected in patron category administration.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths. For each page, test with
the CircSidebar preference both on and off.
- Catalog -> Search -> Details -> Items -> View item's checkout history
- Circulation -> Overdues with fines
- Circulation -> Transfer
- Circulation -> Patron -> Batch checkout
- Circulation -> Built-in offline circulation interface
- Synchronize
- Pending offline circulation actions
- Check out
- Check in
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Create a manual invoice and save
2) Go to Make a payment tab
3) Click 'Pay amount', then cancel
4) Notice you are redirected to the Transactions tab, rather than back to
Make a payment
5) Also try this with Pay selected and write off selected result when
cancelling should be the same
6) Apply patch and try steps 2-6 again
7) Verify that you are now redirected to the 'make a payment tab'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In a production system, you don't usually search for the same
patron over and over, so there's no sense for the browser
to save a list of searched patrons in the patron quick
search. Therefore, should set autocomplete=off for that
input field.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a number of changes to the "Pay fines" template, the
goal of which is to make the interface look better in general. Changes
include:
- Styling the "Pay" and "Write off" buttons as Bootstrap buttons.
- Adding DataTables sorting, searching, and filtering.
- Adding a column showing the fine date.
- Hide the "Add note" input, add a link to show it.
- Add some missing "preventDefault" methods from events.
- Add "Writeoff selected" to the buttons which are disabled when there
is no checkbox selection.
- The <tfoot> tag is now expected by the HTML validator to be after
<tbody>, so this section has been moved to suppress validator errors.
To test, apply the patch and locate a patron who has multiple
outstanding fines.
- Go to Fines -> Pay fines
- Confirm that the table of fines is shown as a DataTable, with sorting
on columns which have data.
- Test columns settings in Administration -> Columns settings.
- Confirm that fine dates are shown, and that sorting by this column
works correctly.
- Click an "Add note" link to show a note input field. Focus should be
in the newly-displayed input.
- Confirm that notes are still saved correctly when paying or writing
off single or multiple fines.
- Confirm that when the "add note" input is hidden, its contents are
erased.
- Uncheck all checkboxes by clicking the "Clear all" link at the top.
The "Pay selected" and "Write off selected" buttons should become
disabled.
- Checking any checkbox should re-enable those buttons.
- Test that the relocated "Apply" button (for outstanding credits)
still works as expected.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To find fix:
1. Go to tools
2. Go to Inventory
3. Verify that under Item location filters the label should be "Location"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The changes caused by the patches for bug 11512 have broken existing
workflows for many libraries and are widely considered to be a bad move.
We should revert this behavior.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Rhonda Kuiper <kuiper@roundrocktexas.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates a number of aspects of the reports chart creation
interface: Chart creation form is now shown in a modal window, and a
separate link has been added to show or hide the chart itself.
Also changed: Minor markup and JavaScript cleanup.
To test, apply the patch and go to Reports -> Saved reports.
- Run a report which returns more than one column.
- On the report results page, click the "Create chart" button. The chart
settings form should appear in a modal window.
- Confirm that the form controls work correctly: Each label should give
focus to the correct input. Changing the chart type should show or
hide the appropriate form fields.
- Click the "Draw" button. The modal should disappear and the chart
should be shown.
- Above the chart should be a "Hide chart" link which works to hide (and
then show) the chart.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Patch makes use fo patron-string.inc for displaying the patron information
on the waiting holds report.
It also adds spans with classes for phone and email.
To Test:
1 - View the holds awaiting pickup report
2 - Note there is no cardnumber for the patron
3 - Apply patch
4 - Cardnumber shows now
5 - Verify the same works for 'Holds over' tab
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Go to the import patrons page and notice that "Replace all patron attributes" is selected by default in the Patron Attributes section.
2) Apply this patch
3) Go back to the import patrons page and notice that "Replace only included patron attributes" is delected by default.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Apply patch
2) Go to Koha admin
3) Search in system prefernces for 'high demand'
4) Verify that the system prefernce 'decreaseLoanHighHolds' is in the
results of the search
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixed ExtendedPatronAttributes typo.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch move the check for "is_expired" to the template and removes
unnecessary code from the script.
The page now correctly handles messages for patrons who are about to
expire, as defined in the NotifyBorrowerDeparture preference.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Select a patron who will expire within the period defined in
NotifyBorrowerDeparture.
- On the patron detail page you should see a message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron detail template in the staff client so
that when a patron's registration is expired a message shows at the top
of the page along with the same "Renew" and "Edit" links which appear on
the checkout page. Links are also shown next the the expiration date in
the body of the page.
This patch also corrects the capitalization of the "Edit Details" link
on circulation.tt.
To test, apply the patch and locate a patron record which is expired.
- On the patron detail page (members/moremember.pl) you should see a
message at the top of the page.
- In the body of the page, next to the expiration date information, you
should see similar message and links.
- On the patron's checkout page the "Edit details" link in the
expiration message should have correct capitalization.
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Go to the patron details for a patron
2) On the right of the screen, right click one of the labels below
'Library use' etc, and Inspect Element
3) View <li> tags which should now each have a unique <id> tag for each
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes some minor markup upgrades to the stock rotation
template: Replace some YUI markup with Bootstrap; Add some missing <tr>
tags; Remove invalid "type" attribute from <script> tag.
To test, apply the patch and go to Tools -> Stock rotation. Confirm that
the page looks correct and adjusts well at various browser widths. Test
with various views: New rota, edit rota, manage stages, manage items.
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes two corrections to the patron API key template: Convert
to Bootstrap grid and correct class on "new key" button.
To test, apply the patch and enable the RESTOAuth2ClientCredentials
preference.
- Open a patron record in the staff client and choose More -> Manage
API keys.
- On the API keys page, confirm that the page adjusts well at various
page widths.
- Confirm that the size of the "Generate new client id/key pair" button
matches the buttons in the toolbar.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply the patch
2) Go to Administration -> System preferences -> Web services, section
OAI-PMH
3) See description on OAI-PMH:archiveID and confirm it does make sense
and have the link to implementation guidelines
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several patron templates to use the Bootstrap grid
instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags in the modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Patrons home page
- New patron
- Patron -> Fines -> Create manual invoice
- Patron -> Set permissions
- Patron -> Change password
- Patron -> Edit
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Create a report or view an existing report
2. Notice that 'Rows per page:' is visible
3. Print report (Ctrl+P)
4. Confirm that on printed report, 'Rows per page:' is no longer visible
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Review patch and confirm that the sentence makes sense
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1. Go to patrons account, more, Set Permissions.
2. Dropdown the Parameters section.
3. Text should display "If not set the logged in user could only edit
circulation rules for its the own library (please note that
manage_circ_rules is still required)"
4. Apply patch and reload page
5. Text should now display "Edit circulation rules from any library. If
not set the logged in user could only edit circulation rules for their
own library (please note that manage_circ_rules is still required)"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The CheckPrevCheckout preference can be overriden by a setting in the
patron categories, I've edited the options to reflect this.
Test plan:
1. Check the CheckPrevCheckout system preferences and confirm that the
options are clear
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Give patron outstanding fees
2. Search patron and select 'Make payment'
3. Select either 'Pay' or 'Write off'
4. Confirm that first tab title remains as 'Transactions'
5. Confirm that current tab title remains as 'Make a payment'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the staff client lists page so that the
barcode/biblionumber entry form from the left hand sidebar into a modal
window, triggered by a button in the toolbar.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View the contents of a list in the staff client, logged in as a user
who has permission to add items.
- Click the "Add items" button. A modal window should appear with the
barcode/biblionumber entry form.
- Submit barcodes and/or biblionumbers and confirm that the correct
titles are added to the list.
- Log in again as a user who does not have permission to add to the
list. Confirm that the button isn't present.
Signed-off-by: Mackey Johnstone <mackeyfj@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the styling of form fields which are configured to
use the jQueryUI datepicker widget. Some CSS has been added, and the
default datepicker configuration has been changed.
To test, apply the patch, rebuild the staff client CSS file, and clear
your cache if necessary. Test pages which include a datepicker to
confirm that they look correct and work correctly. Some examples:
- Circulation -> Check out -> Specify due date
- Patrons -> Add patron -> Date of birth, registration date, expiry
date fields
- Serials -> Search subscriptions -> Search results page sidebar
- Tools -> News -> Add news item
And confirm that this change hasn't adversely affected the calendar
tool:
- Tools -> Calendar
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes various corrections and improvements to the payment
details page:
- Grid converted to Bootstrap
- Correct title tag
- Add patron toolbar
- Adding missing patron-related JavaScript
- Improve some language
To test, apply the patch and locate a patron who has one or more
payments on their account.
- Open Fines -> Account -> Details of a transaction
- Confirm that the page looks correct and adjusts well at various
browser widths.
- Confirm that patron toolbar items work correctly
Signed-off-by: Jose-Mario <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a typo in circulation_batch_checkouts.tt that makes Koha skip
a warning if the user cannot borrow due to circulation rules.
This patch corrects this typo.
To test:
1. In Administration > Global system preferences, 'Allow'
BatchCheckouts and enter patron categories in
BatchCheckoutsValidCategories
2. Go to Administration > Circulation and fines rules
3. Enter a rule where a certain category of patrons (that is in
BatchCheckoutsValidCategories) cannot take out a particular item type
4. Search the catalog for an item of that item type
5. Copy the barcode
6. Go into patrons and find a patron of that category
7. Click on the Batch checkout tab
8. Paste the barcode in the box and click Check out
9. It should say 'Too many checked out'
10. Apply the patch
11. Try the check out again, it should show both warnings ('Too many
checked out' and 'This patron can't check out this item per library
circulation policy')
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Add core methods required to support the migration of ILL requests
between backends.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new system preference (FallbackToSMSIfNoEmail)
which if enabled Koha will send suggestion notices by SMS if a borrower
has a defined SMSalertnumber and no email.
The use of the syspref prevents automatic fallback to sending suggestion notices as SMS when there's no defined email.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply patches, restart memcached and plack
6. Check the 'FallbackToSMSIfNoEmail' syspref
is disabled
7. Repeat steps 2,3 and observe in the message_queue
table the message_transport_type = 'email'
i.e. If the syspref is disabled then the message is still sent by email
to borrowers with defined smsalertnumber and no email address
8. Enable the 'FallbackToSMSIfNoEmail' syspref
and repeat steps 2,3 and notice the
message_transport_type = 'sms'
i.e. If the syspref is enabled then the message is sent by sms to
borrowers with defined smsalertnumber and no email address
9. Repeat steps 2,3 with a patron with an email
address and no smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref
enabled and disabled and notice in both cases the
message_transport_type = email.
i.e. If a borrower has an email address defined the suggestion
notice will always be sent via email
10. Repeat steps 2,3 with a patron with no email or smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref enabled and disabled and notice in both cases the message_transport_type = email
i.e. If the borrower has no smsalertnumber and no email defined then the
suggestion notice will be sent by 'email'
11. Run t/db_dependent/Suggestions.t
Sponsored-By: Brimbank Libraries, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21241: (follow-up) Renamed system preference
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the HTML structure of the vendor edit page so that
the markup is a little simpler. CSS is modified to match. This structure
should serve as a model for other similar form structures:
<fieldset class="rows">
<ol>
<li>
<label>General label:</label>
<label class="radio">
Specific label 1 <input type="radio" />
</label>
<label class="radio">
Specific label 2 <input type="radio" />
</label>
</li>
</ol>
</fieldset>
To test, apply the patch and regenerate the staff client CSS.
- Go to Acquisitions -> Vendor search -> Vendor -> Edit vendor
- In the "Ordering information" section, confirm that the position of
radio buttons looks correct.
- Confirm that radio button labels work correctly.
- Confirm that the adjacent dropdown menus work well.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Using only TT plugin for authorised value description is a better code.
Test plan :
Part 1:
1.1) On a catalog with items.notforloan defined with authorized values category NOT_LOAN
1.2) Define in NOT_LOAN an authorized values 1 with description 'at the beach'
1.3) Define in NOT_LOAN an authorized values 2 with description empty
Part 2:
2.1) Set preference 'AllowNotForLoanOverride' to 'Don't allow'
2.2) Edit an item with notforloan=1
2.3) Checkout this item => You see 'Item not for loan (at the beach)'
2.4) Edit an item with notforloan=2
2.5) Checkout this item => You see 'Item not for loan'
Part 3:
3.1) Set preference 'AllowNotForLoanOverride' to 'Allow'
3.2) Edit an item with notforloan=1
3.3) Checkout this item => You see 'Item is normally not for loan (at the beach)'
3.4) Edit an item with notforloan=2
3.5) Checkout this item => You see 'Item is normally not for loan'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
During checkout the withdrawn information is displayed in a message :
"Item has been withdrawn".
Like in other pages and like notforloan, we should display the withdrawn authorized value description.
This patch adds this display.
Add <span> so that translation does not change.
Also adds class 'co-withdrawn' (like in checkin 'ci-*' classes) to ease hidding this new information via CSS.
Test plan :
1) On a catalog with items.withdrawn defined with authorized values category WITHDRAWN
2) Define in WITHDRAWN an authorized values 1 with description 'dropped in trash'
3) Define in WITHDRAWN an authorized values 2 with description empty
4) Edit an item with withdrawn=1
5) Checkout this item => You see 'Item has been withdrawn (dropped in trash)'
6) Edit an item with withdrawn=2
7) Checkout this item => You see 'Item has been withdrawn'
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Place a hold for a patron
2 - Check the item in at the pickup location
3 - Note the holds modal does not link to patron
4 - Apply patch
5 - Check in item again
6 - Patron name in modal is a link
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch undoes the changes to addorderiso2709.tt introduced by Bug
19753. The item information tab can include embedded JavaScript for
cataloging plugins, and these don't currently work with JS in the
footer.
To test, apply the patch and test the JavaScript driven features of the
"Add to basket from a staged file" page:
- Acquisitions -> Vendor -> Basket -> Add to basket from a staged file
- MARC and Card previews, select all/clear all
- Item information tab: Cataloging plugins for fields like date
acquired, barcode
- Default accounting details tab: Show inactive control
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Instead of dying!
Test plan:
Assuming you have a patron with borrowernumber=51 and another one that
can be deleted with borrowernumber=42
- authorities-home.pl
* Delete an authority record
* hit /cgi-bin/koha/authorities/authorities-home.pl?op=delete
- basket/sendbasket.pl
* Send a basket to someone
* hit /cgi-bin/koha/basket/sendbasket.pl?email_add=1
- members/apikeys.pl
* Generate and delete an API key for a patron
* hit /cgi-bin/koha/members/apikeys.pl?patron_id=51&op=delete
- members/deletemem.pl
* Delete a patron
* hit /cgi-bin/koha/members/deletemem.pl?member=42&op=delete_confirmed
- members/mancredit.pl
* Add a manual credit
* hit /cgi-bin/koha/members/mancredit.pl?borrowernumber=51&add=1
- members/maninvoice.pl
* Add a manual invoice
* hit /cgi-bin/koha/members/maninvoice.pl?borrowernumber=51&add=1
- members/member-flags.pl
* Change permissions for a patron
* hit /cgi-bin/koha/members/member-flags.pl?member=51&newflags=1
- members/member-password.pl
* Change the password for a patron (from the staff interface)
* hit /cgi-bin/koha/members/member-password.pl?member=51&newpassword=aA1
- members/memberentry.pl
* Edit some patron's info
* hit /cgi-bin/koha/members/memberentry.pl?borrowernumber=51&op=save
- members/paycollect.pl
* Pay an individual fine
* hit something like /cgi-bin/koha/members/paycollect.pl?borrowernumber=51&pay_individual=1&accounttype=L&amount=1.00&amountoutstanding=1.00&accountlines_id=157&paid=1
You may need to edit some values
- tools/import_borrowers.pl
* Import some patrons
* hit /cgi-bin/koha/tools/import_borrowers.pl?uploadborrowers=1
- tools/picture-upload.pl
* Upload an image for a patron
* You will need to edit the html content
hit Home › Tools › Upload patron images
then locate the csrf_token input and modify its value
Note for QA:
- Opac is not done as blocking_errors.inc does not exist for this
interface
- ill/ill-requests.pl
I did not manage to replace this occurrence
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several patron templates to use the Bootstrap grid
instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
Markup has been corrected in paycollect.tt and readingrec.tt where a
table row lacked <tr>.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Patron -> Notices
- Patron -> Purchase suggestions
- Patron -> Circulation history
- Patron -> Routing lists
- Patron -> Statistics
- Patron -> Fines
-> Pay
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron card creator templates to use the
Bootstrap grid instead of YUI.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Tools -> patron card creator
- Manage -> Card batches
- Edit card batch
- Manage -> Layouts
- Edit layout
- Manage -> Images
- Manage -> Card templates
- Edit template
- Manage -> Printer profiles
- Edit profile
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several serials templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and go to Serials.
- Add or edit a new subscription. The "create an item..." and "do not
create an item..." labels should look correct.
- Search for subscriptions
- Select two or more subscriptions to batch edit.
- The subscription batch edit page should look correct and adjust
well to various browser widths.
- View a subscription and click the "Renew" button. The subscription
renewal pop-up window should look correct.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes member-password.pl use $patron->set_password instead of
update_password. The side effect is that setting password and userid
become separate steps in the code.
For the password all the initial checks are the same, but password
strength is checked on calling set_password and an exception is thrown.
So instead of checking the password quality, we just wait for exceptions
and behave the same as before.
Bonus: you will notice I reused the initially fetched $patron object.
Things get simpler :-D
To test:
- Verify that changing the password / userid for a patron works as usual
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies various templates to add or improve coverage of the
Bootstrap grid.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Administration -> Item circulation alerts
- Authorities -> Authorities search -> Merge records
- Catalog -> Bibliographic details -> Rota (StockRotation must be
enabled)
- Tools -> News: Main and add/edit view
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Displays amount outstanding correctly when holds are blocked
by maxoutstanding.
To test:
- Check maxoutstanding system preference value
- Add a fine to a patron account exceeding maxoutstanding
- Try to place a hold for this patron from staff
- Verify this message is shown:
Patron has outstanding fines: 6.00
- Toggle CurrencyFormat system preference and verify display
changes according to setting
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The item lost report displays the price and replacement
price for lost items. With the patch they will display
according to the CurrencyFormat system preference.
To test:
- Mark 1 or more items lost
- Make sure that replacement cost and purchase price are set
- Go to Reports > Items lost
- Search for your lost items
- Verify price and replacement price display
- Apply patch and toggle CurrencyFormat to different settings
- Refresh lost items report
- Verify prices are always displayed according to syspref setting
Signed-off-by: Olivia Lu <olivialokm@gmail.com>
Signed-off-by: Jose-Mario Monteiro-Santos <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Find Fix:
1. Go to Koha Administration
2. Search PatronSelfRegistrationVerifyByEmail
3. Verify that NOTE now says "system preference requires the
cleanup_database ..."
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Look at value of CataloguingLog prefernce
2) Apply the patch and the value should change
3) Verify that the warning has been removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This adds the "No, let me think about it" option.
It is the default option. If the Mana system preference
is set to "No, let me think about it", the user is warned
on the admin home page that he has not decided yet to use
or not Mana knowlegde base.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- add a class SharedContent.pm to communicate with Mana-KB server
- add a link in serials-menu.inc to serials_search.pl to open
a mana-subscription research form
- modify the research form in serials-search.tt to show the right fields
for Mana-KB
- create datatable in mana-subscription-search-result.inc to show
results from a research on Mana-KB
- modify serials-search.pl to manage research on Mana-KB
- add a mana_id to subscription table
- add a share button on serials-toolbar.inc and a modal to ask
the language of the share and to alert if the subscription is
already link to a Mana-KB subscription model
- add function in C4/Serials to get all the info for a subscription
sharing
- modify subscription-detail.pl to manage sharing to Mana-KB
- modify subscription-add.tt and subscription.pl to manage a
import from Mana-KB during a subscription creation
- add 2 script in svc for ajax calling from subscription-add.tt
to communicate with Mana-KB server during a asubscription creation
- add a function in Subscription.pm to have all the info for a Mana-KB research
from a biblionumber
- modify functions used by subscription-add.pl in C4/Serials to manage a
frequency which came from Mana-KB server and not already created on the
koha database, and modify the tests of the said functions
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add the system preference to enable or disable Mana-KB webservice on koha.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1. From home page, go to "Acquisitions"
2. Add a test vendor under "New vendor"
3. Give the vendor any name and click "Save"
4. Click "New Basket"
5. Give the basket a name and click "Save"
6. Click on "Add to basket"
7. Click on "From an external source"
8. Note the order of inputs (ISBN, ISSN, Title...)
9. Go back to the homepage
10. Go to "Cataloging"
11. Click on "New from Z39.50/SRU" button. A new window should open
12. The order of inputs under 'Z39.50/SRU Search' should all match the
order of inputs from step 8. (Except "Select MARC framework)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds [% USE Koha %] to header.inc so that Koha.Preference
calls will work correctly.
To test, apply the patch and log in to the staff client as a user who
has permission to access the ILL module.
- Go to the catalog's advanced search page
- Cnfirm there is a header menu item under "More" for
"ILL requests."
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 0cffb0f758
Bug 21621: Remove incorrect GROUP BY from tools/letter.pl
The test plan was not complete enough.
Test plan:
1) Go to Home › Tools › Notices & slips
2) Choose a letter to edit, e.g. PREDUE. Note that there is only a
single row.
3) Click the edit button on the notice.
4) Expand the 'Print' section. Put text into the Message subject and
Message body text areas.
5) Click save, this will take you back to the 'Notices & slips' page.
6) Clone PREDUE for a specific library
7) The 'all libraries' option must list the templates for all libraries,
but without duplicate
8) Select a library in the dropdown list: only the templates for the
given library is listed, without duplicate
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Delete all refund_lost_item_fee_rules form the db
delete from refund_lost_item_fee_rules;
2 - View the Standard circ rules - Default lost item fee refund shows as
'No'
3 - View circ rules for a single library, shows as 'Default (Yes)'
4 - Return a lost item, it actually does refund (this is in the
LostItemFeeRules code, default 1 if not set)
5 - Apply patch
6 - Rule shows as 'Yes'
7 - View a specifc rule, still says Default (Yes)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 14716 added a call to encode-uri() and namespace str. This
namespace declaration is sometimes missing in UNIMARC default XSLT
files.
This patch adds namespace declaration also where encode-uri is not used
because it may be used in the future. And those files are the base for
home made custom files.
Test plan :
1) Use a UNIMARC DB
2) Use default in all XSLT sysprefs
3) Apply patch
4) Perform a search on OPAC
5) Check display is OK
6) Click on a record for detail page
7) Check display is OK
8) Perform a search on staff interface
9) Check display is OK
10) Click on a record for detail page
11) Check display is OK
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1. Navigate to tools, then batch item modification.
2. Input a valid barcode into the barcode list input field, and press
continue.
3. Under the Edit items heading, text should display "Checking the box
right next the subfield ..."
4. Apply patch and refresh page, text should now display "Checking the
box right next to the subfield ..."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changed 'Don't Display' to 'Don't display' for the
EasyAnalyticalRecords options.
To find fix:
1.Be loged in as a user who can access sys prefrences.
2.Go to:
Koha Administration > Global System Preferences > Cataloging >
Interface.
3.Confirm that the dropdown option for EasyAnalyticalRecords is now
'Don't display'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I removed space before : on order receive filters
To find this change:
1. Create a vendor
2. Create a basket and add an order to basket
3. Close basket and select 'receive shipment'
4. Check that filter options found on the left side of the page finish with a colon and that there is no space before the colon
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changed "Street Address" to "Street address" in the patron search search
fields under the plus sign to fit Koha's capitalization rules.
To find this change:
1. Go to Patrons and switch in the search to search patrons
2. Click on the plus sign
3. Check "Search fields" pull down
4. "Street Address" should now be "Street address"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Enable OnSiteCheckouts system preference
2) Checkout an item checking the onsite checkout checkbos in more
options
3) Go to circulation > pending on-site checkouts
4) Verify the checkout shows
5) Go to circulation > renew
6) Try to renew the on-site checkout using the barcode
7) Verify display:
onsite_checkout Continue without renewing
8) apply the patch and reload page with error message
9) verify display:
Item cannot be renewed because it's an onsite checkout
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To find this change:
1. Enable use plugins in global system preferences
2. Go to tools then click tool plugins
3. Verify that this string now says plugins
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds column configuration to the hold ratios report
DataTable.
This patch also amends some JavaScript and markup related to some
obsolete jQuery syntax: A hover function was being used to change an
element's style on hover. It has been removed in favor of using a link
and CSS>
To test, apply the patch and view the hold ratios report using a ratio
which will return multiple results. Confirm that DataTables controls
work correctly: Paging, search, column visibility, export and print.
Click a number in the "hold ratio" column of the table and verify that
it populates the "hold ratio" field in the "refine results" form in the
sidebar.
Test setting default column configurations in Administration -> Columns
settings.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Circulation -> Pending on-site checkouts (enable OnSiteCheckouts
preference).
- Test with the CircSidebar system preference both on and off
- Circulation -> Overdues
- Circulation -> Holds to pull
- Circulation -> Renew
- Test with the CircSidebar system preference both on and off
- Circulation -> Bibliographic detail page -> Request article (enable
ArticleRequests system preferences)
- Circulation -> Hold ratios
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds or corrects Bootstrap grids on three
acquisitions-related templates.
To test, apply the patch and confirm that these pages look correct and
adjust well to various browser widths:
- Acquisitions -> Vendor -> Basket -> View
- Acquisitions -> Vendor -> Details
- Acquisitions -> Vendor -> Basket -> Add to basket -> From a new
(empty) record
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch redesigns the authorized values management interface. The
primary change is that the initial view of authorized values is now a
table listing all authorized values categories and their descriptions.
Descriptions have been added or updated according to the text of the
manual.
To test, apply the patch and go to Administration -> Authorized values.
- You should see a table of authorized values displayed in a
DataTables-formatted table.
- Click a category. You should be taken to the list of authorized
values for that category. If there are none defined you should see
a message saying so, including a button to add one.
- Click the "Add" button next to an authorized value category. It
should take you to the form for adding an authorized value to that
category.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
