We don't need that file in the package build because it's generated on a
per-site basis from a template.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: upgraded DEBUG level to WARN in config file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
They were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A trivial string patch to update the error message displayed to
user if koha-translate is used to attempt removal of a language
that is not installed.
Test plan
=========
1/ attempt to remove a non-existent language by
<installdir>/debian/scripts/koha-translate --remove <langcode>
2/ it should show "Error: the selected language is not already
installed."
3/ apply patch
4/ repeat step 1; it should show "Error: the selected language is
not installed."
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If there are no instances already created on install/upgrade, the
koha-common.postinst script hungs in the absence of files to fix
and keeps waiting for user input.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches the zebra configuration of existing Koha installations so
that their modulePath will work on newer Debian (and presumably Ubuntu)
releases.
Testing:
* Install a package built with this patch onto a system with instances
created by an older Koha version.
* Check that the files in /etc/koha/sites/*/zebra-*.cfg have the new
modulePath: directive rather than the old one.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds the full list of paths that debian might use for zebra to the
search path for modules.
It also means we can say we support s390x architecture. Whatever that is.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The debian/scripts/koha-translate script was still testing for the old naming
schema files. I also made sure all files are tested, to warn the user if
any of them is absent.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. Tested both upgrading and on a new install.
Old versions of koha-common would put in a symlink to the system YUI
libraries. This causes upgrade problems, so we look out for that and zap
it if it's there.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the build script keep the shipped YUI JavaScript library
instead of explicitly deleting it and using the one the operating system
provides.
Development is done against the YUI library we ship, so this makes sense
even if Debian still shipped it.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
daemon uses by default /tmp/ for pid files, if they are unspecified.
Pass the right directory to daemon, so it knows where to put the pid file.
Signed-off-by: Attila Kinali <attila@kinali.ch>
TEST PLAN
---------
1) Roll a distribution and confirm it works.
OR
1) Hack all the /var directories to point to git directories
2) Add a dummy user for the instance name
3) sudo the script with the faked instance name.
-- the daemon should be running and the pid file should be in
the expected directory.
The first way is the proper way to test, I did the latter. :)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The debian/build-git-snapshot script should not return success if an
error occurred.
Note that sys_command_output won't raise an error if something fails.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Made a minor change to print the command, add a newline.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The only place python is used is in the debian/bd-to-depends script.
This patch rewrite this script using perl.
Test plan:
The execution of
debian/bd-to-depends
Should return the same output.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Checked output, built a package, all is happy. Yay for no python!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently koha-disable ONLY disables the instance in the apache conf
file. Presumably if you want to disable the instance, you also want
its processes to stop, so this patch will stop zebra, if running,
and SIP, if enabled.
Depends on Bug 13784.
To Test:
1) Have an enabled instance, with zebra and SIP running.
2) Run koha-disable INST. Note that after, both zebra and SIP
will still be running.
3) Re-enable INST.
4) Apply patch, and then copy debian/scripts/koha-disable to
package site, over /usr/sbin/koha-disable.
5) Run koha-disable INST. You should now see that both zebra
and SIP have been stopped.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Due to a line in debian/rules, git-build-snapshot tries to delete a YUI-related
path that does not exist anymore (bug 13612 I guess). Build process ends with an error.
This patch deletes the line.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
An incorrect conditional makes the indexer daemon fail to load.
To test:
- Enable the indexer daemon on packages [1]
- Restart koha-common:
$ service koha-common restart
- Run
$ ps waux | grep koha-indexer
=> FAIL: there's no reference to the rebuild_zebra.pl script
(line should look like *rebuild_zebra.pl -daemon*)
Run ps -ef | grep rebuild_zebra.pl too to make sure.
- Apply the patch, repeat the steps
=> SUCCESS: the rebuild_zebra.pl script is ran
- Sign off :-D
Thanks
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects the call to 'basename' inside the script so it correctly
shows the language code when asked to list the available languages.
To test:
- On a packages install, run:
$ koha-translate --list --available
=> FAIL: It shows:
am-Ethi-opac-bootstrap.po
ar-Arab-opac-bootstrap.po
az-AZ-opac-bootstrap.po
be-BY-opac-bootstrap.po
ben-opac-bootstrap.po
...
- Apply the patch
- Copy the patched debian/scripts/koha-translate script to your packages setup.
- Run:
$ koha-translate --list --available
=> SUCCESS: It shows:
am-Ethi
ar-Arab
az-AZ
be-BY
ben
...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the fixing of the namespace in the SIP code, we don't need to
modify the PERL5LIB to have the old one.
To test:
* do a package install using this and the other patches on bug 7904
* enable SIP
* make sure koha-start-sip and koha-stop-sip work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add greek as lang definition in installer.
Developed in collaboration with Giannis Kourmoulis <ikourmou@lib.auth.gr>
Test plan :
- Install using "gr" in "Primary language for Zebra indexing"
- check gr is used in etc/zebradb/zebra-*.cfg
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The memcache parameters aren't used by anything (except C4::SQLHelper,
but that's a cancer on the face of the earth) anymore, so they can go.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1- Build new koha packages
2- Check that the conflist file contains the changes we have made
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Prior to this patch, the koha packages depended on mysql-client. This
meant that it was tricky to use things such as the MariaDB libraries
instead.
This patch recommends mysql, but will accept mariadb and other things
that are marked by debian as able to replace mysql.
Signed-off-by: wajasu <matted@34813.mypacks.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Package up a branch with this patch
install that package
create a site - sudo koha-create --create-db testdisable
enable a site - sudo koha-enable testdisable
check it's enabled - sudo koha-list --enabled
* it should show up
disable a site - sudo koha-disable testdisable
Do this for both debian squeeze/wheezy and ubuntu 12.04 and 14.04, if you can. I'd like to see a sign off from a debian (sq/wh)eez(e/y) or ubuntu 12 user, because I could only test reliably on ubuntu 14.04.
* make sure apache restarts and no errors are produced
check it's disabled - sudo koha-list --enabled
* it should not show up
check the site is still there - sudo koha-list
* it should still be there
check that the config file has the Include for disabling uncommented
* the line Include /etc/koha/apache-shared-disable.conf should not have a # in front.
Re-enable the site - sudo koha-enable testdisable
* the line Include /etc/koha/apache-shared-disable.conf should have a # in front.
And the final question - does the site work? All other functions unchanged?
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. code reads better too.
Edit: I added a missing space in one line.
This patch adds two parameters to the koha-create command:
--enable-sru: makes the koha-create script enabled the SRU server for
the created instance
--sru-port: lets the user specify a desired port for the SRU server
to listen at. It defaults to 7090
To test:
- Apply the patch on top of master
- Build your own package and install / can be tested just using the koha-create
command on a 3.16+ packages install
- Create an instance as usual (i.e. without --enable-sru and --sru-port)
=> SUCCESS: The instance is created, the publicserver sections are
both commented out. The first publicserver section has 7090 set as the
listening port.
- Create an instance as usual, passing --sru-port 456
=> SUCCESS: The instance is created, the port is set but the publicserver sections
are commented out
- Create an instance with --enable-sru (with and without --sru-port)
=> SUCCESS: Verify the instance is created as expected, with the SRU server enabled
(port 7090 if no --sru-port passed, the one we chose otherwise).
- Verify that the docs also talk about this new parameters addition.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
* Build a package and install it, and verify that there are no errors.
* Play around with koha-translate, listing, adding, and removing
languages.
Note: one reference to prog and ccsr remains in koha-translate. This is
to allow it to remove any pre-existing translations on an upgrade.
Note 2: prog translations are still being installed, I think this is due
to the underlying translation system doing it.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
To test...
- apply patch
- build and install a new Koha .deb from patched codebase
- create a new Koha instance
- add some authority records to instance
- do a full zebra reindex
- do an authorities search, and get some results
note: this patch does not fix existing Koha instances, just new ones
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The itype facet was missing 952$y for both MARC21 and NORMARC.
This patch adds that. And also modifies the zebra-biblios-dom.cfg file
(also the debian/ version) so facetNumRecs is set to 1000 for zebra.
It is the amount of records that are taken into account. The more record,
the more exact the facets for the result set. 1000 was chosen as it changed
the time to reindex 1000 records from 18s to 19s.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a variable to koha-conf.xml controlling the use of Zebra facets.
Usage:
- use_zebra_facets = 1 | 0
Zebra facets work only on DOM.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes koha-indexdefs-to-zebra.xsl to correctly process a new syntax
for defining facet indexes on the XML files.
It also changes the retrieval file to allow access to Zebra's internal data from
Zoom (i.e. access to zebra::facet:*).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Cook <dcook@prosentient.com.au>
Seems to work with DOM and MARC21.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
