This patch adds server-side & client-side validation for email
form fields in the members/memberentry -view and in the
opac/memberentry-view (bootstrap).
I recently added simple validation for phone number and email address fields
for our in-house koha and saw this old bug: I'm open to any ideas on how
to do this better. Validation for phone numbers would be easy to add on
top of this but I left it out since this bug is only about the email
fields.
To test:
1) Select a member and go to any of the edit forms with email fields
(Primary info, "Library use", "Alternate address", "Alternative
contact").
2) Disable javascript in the browser in order to test server-side
validation and try to input invalid emails in each of the email form
fields.
3) Confirm that an invalid address is catched from any of the email
fields, an alert shown for each invalid address and that the member's
information was not updated with invalid data.
4) Enable javascript in the browser.
5) Confirm that the jquery validation plugin caches invalid addresses
from any of the email fields and that you cannot send the form before
correcting the problem.
6) Perform the same tests for the opac-memberentry-view.
Note: as the jQuery validation plugin doesn't exist in the bootstrap
folder, I just copied it over from the staff-client folder -how to deal
with this?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I have undone the changes to opac.css so that they can be submitted as a
separate patch. I have some other follow-ups to make as well.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Jonathan Druart agreed that C4::Input is vestigial code that should be removed.
Here is how I checked. First I found where C4::Input was used. Then, I checked
what functions are in the package: just checkdigit. Then, I confirmed that
checkdigit is not used at all in any acquisition, administration, or member
related perl scripts. Lastly, I took a look at our supposed test file for the
package. It was painfully sparse.
As such, this patch removes the test file and the package file, and removes
C4::Input references from these six files:
- acqui/addorderiso2709.pl
- acqui/basketgroup.pl
- acqui/neworderempty.pl
- acqui/uncertainprice.pl
- admin/aqplan.pl
- members/memberentry.pl
NOTE: neworderempty had 3 lines of it?! Didn't anyone see that?!
Here is the output of what I did to confirm this correction:
mtompset@debian:~/kohaclone$ git reset --hard origin/master
HEAD is now at 6e9086f Bug 3206: (QA followup) missing comma on sysprefs.sql
mtompset@debian:~/kohaclone$ git grep C4::Input
C4/Input.pm:package C4::Input; #assumes C4/Input
C4/Input.pm:C4::Input - Miscellaneous sanity checks
C4/Input.pm: use C4::Input;
acqui/addorderiso2709.pl:use C4::Input;
acqui/basketgroup.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/neworderempty.pl:use C4::Input;
acqui/uncertainprice.pl:use C4::Input;
admin/aqplan.pl:use C4::Input;
members/memberentry.pl:use C4::Input;
t/Input.t: use_ok('C4::Input');
mtompset@debian:~/kohaclone$ grep sub C4/Input.pm
sub checkdigit ($;$) {
my $temp2 = substr($infl,$i,1);
if ($rem eq substr($infl,8,1)) {
} # sub checkdigit
mtompset@debian:~/kohaclone$ grep checkdigit `find acqui -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find admin -type f`
mtompset@debian:~/kohaclone$ grep checkdigit `find members -type f`
mtompset@debian:~/kohaclone$ cat t/Input.t
use strict;
use warnings;
use Test::More tests => 1;
BEGIN {
use_ok('C4::Input');
}
Apply this patch, and the output of git grep C4::Input will be empty.
Run koha qa test tools (kind of overkill)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
On moremember, the button is displayed for Organisations.
To be consistent, it should be displayed on the circulation page too.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jason Robb - SEKLS (jrobb@sekls.org)
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently, when generating a discharge letter, branches fields are not translated in the letter (<<branches.branchname>>, <<branches.branchaddress1>>, etc.)
This patch fixes that.
How I tested:
- Set syspref 'useDischarge' to 'allow'
- Go to Home > Tools > Notices & Slips
- Edit DISCHARGE, add to 'Email message':
<p><<branches.branchname>><br />
<<branches.branchaddress1>><br />
<<branches.branchaddress2>><br />
<<branches.branchaddress3>><br />
<<branches.zip>> <<branches.city>><br />
</p>
- Go to detail page of a patron > discharge
- Click 'Generate discharge'
- Verify that the PDF contains the information above.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Working on bug 13497 and bug 9314, I run into some Koha vestiges.
The category_type parameter should not be passed to memberentry.
On creating a new patron, the categorycode should be passed, and on
editing, it's useless. We can work with the borrowernumber and retrieve
these values.
Details of the changes:
- members-toolbar.inc: Remove the category_type parameter passed to
memberentry.pl
- memberentrygen.tt: Just remove the useless category_type parameter on
editing a patron. Also remove the unused one passed to
guarantor_search.pl.
- tables/members_results.tt: the borrowernumber is enough to edit a
patron.
- memberentry.pl: check_categorytype is never used in the template, all
the process to calculate/retrieve it is unnecessary.
- members/nl-search.tt: The borrowernumber is enough to edit a patron.
Test plan:
Try to create and edit patrons and verify that
- the guarantor search still work
- the form (memberentry) behave as before
Edit a patron from the nl-search.pl script (Magnus?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
On top of 9314 (13497 already pushed)
No evident regressions found, add/edit patron works,
search/set guarantor works.
Cant test nl-patron.pl save for exec it.
prove -v t/NorwegianPatronDB.t runs
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the pref AddPatronLists has been removed in bug 13497, the code
related to type_only and category_type in memberentry.pl is useless.
Test plan:
Confirm you don't the information message.
You can also confirm that the message was wrong and nothing was saved.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Dead code removed, no errors
Think that bug description can be updated to commit message
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The check on the ages limits is only done when the dateofbirth field is
mandatory, which does not make any sense.
This check should be done when the field is filled.
Test plan:
1/ Remove the dateofbirth field from the BorrowerMandatoryField pref
2/ Create a patron category for teenager (say between 12-17y)
3/ Try to create a patron in this category outside the range of the ages
limits.
You should not be able to do it.
Signed-off-by: Christopher Brannon <cbrannon@cdalibary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The branchcode and categorycode parameter names are too common and are
confusing.
To remove the ambiguity, this patch renames them with branchcode_filter
and categorycode_filter.
Test plan:
1/ Go on the patron home page (members-home.pl)
2/ Fill the library and category dropdown list in the header search
3/ The patron result list appears and the filters (on the right) are
correctly set with what you have selected.
Make sure the ones in the header are also correctly selected.
4/ Click on a patron
5/ On the patron detail page (moremember.pl), the dropdown lists in the
header are not preselected.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A lot of page uses the patron search box header include (git grep
patron-search.inc for the list) and the branch and category lists are
not generated for all of them.
For instance, on a patron detail page, there is a [+] link, but nothing
append on clicking on it.
This patch add a new template plugin "Categories" to get all patron
categories from the templates.
Test plan:
1/ Verify the [+] is working on all patron page (if that works for 2,
that should work for all).
2/ Launch a search from the header box and verify the library and
category dropdown lists select the correct value.
3/ Launch a search on the patron search page (patron home) and verify
the search is working correctly on selecting a category and/or a library
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To get rid of SQLHelper, we should not use this C4::Members::Search anymore.
Test plan for Magnus :)
0/ Enable the pref you need to use the Norwegian national library card ft
1/ Go on the members/nl-search.pl page and search for patrons.
2/ Make sure you search by card number and by "social security number"
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Searching works the same with and without the patch. Thanks Jonathan!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a check to prevent deleting the user's own account.
Additionali it fixes a "missing link" in moremember.pl and wrong comparisions in moremember.tt regarding other forbidden deleting.
To test:
- Apply patch
- Create a user with sufficient privileges to delete users
- Log in as this new user
- Try to delete this user. Confirm message box "Are you sure..."
- Confirm that you get a message "Not allowed to delete own account" and that the user still exists.
Bonus test:
Try to trigger other forbidden deletions (see members/deletemem.pl): 'CANT_DELETE_STAFF', 'CANT_DELETE_OTHERLIBRARY', 'CANT_DELETE'
(You can fake it by using an URL like: /cgi-bin/koha/members/moremember.pl?borrowernumber=115&error=CANT_DELETE_STAFF etc.)
Without patch, no message appears. With patch, messages appear as appropriate.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Attempted all CANT combinations. From reading the code,
this is kind of an important patch, because I'm not sure
deleting error messages work at all right now based on what
I read.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If error occurs when generating the pdf, it would be better to get an
encapsulated error instead of the "software error" message in the pdf
file.
To test this patch I added this change:
b/Koha/Borrower/Discharge.pm
-115,6 +115,7 @@ sub generate_as_pdf {
say $html_fh $html_content;
close $html_fh;
my $pdf = PDF::FromHTML->new( encoding => 'utf-8' );
+ $html_path .= "poeut";
$pdf->load_file( $html_path );
$pdf->convert;
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch should be applied to work with bug 11944.
If you don't have 11944 yet, just don't apply this patch.
Note that the line
binmode(STDOUT);
in pl files is mandatory.
It comes from bug 11944 that adds the line
binmode( STDOUT, ":utf8" );
in C4::Templates::gettemplate.
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch. It adds new package and files for the new
pages (opac-discharge, members/discharge and members/discharges).
At the intranet, it is now possible to generate a discharge for a patron.
At the opac, a patron can request a discharge and a discharge if it has
been validated by a librarian.
Requirements:
The perl module PDF::FromHTML
New sysprefs:
- useDischarge: Allows librarians to discharge borrowers and borrowers
to request a discharge
New letter with a letter_code DISCHARGE.
Test plan:
- Switch on the syspref useDischarge.
- Verify a new tab appears in the patron page (intranet and opac).
- Verify the discharge cannot be generated if the patron has issues.
- Verify the patron can request a discharge from it's opac area.
- The request appears on the main page (intranet).
- Generate the discharge from the intranet.
- Try to download it (from the opac and the intranet).
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch displays the address information in the left column of the patron's pages using the new system preference.
The address is formatted in member-display-address-style-us.inc and member-display-address-style-de.inc
To test:
- Apply patch on top of 1st and 2nd patch
- Select 'German style' in system preference 'addressformat' in I18N/L10N
- Verify that the address information displays properly in the left column of all patron's pages.
- Verify that the address displays properly in the main area of moremember.pl as well (Note: In right column, Alternate address /contact are not yet touched))
- Switch system preference to US style, repeat checks
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
AMending without changes to put this patch at the end of the patch list / Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On printing the summary from the patron account, the hours are not
displayed if needed.
The as_date_due flag should be set to display it correctly.
Problem, GetPendingIssues modify the value retrieved from the database.
In order to not add regression and check all calls to GetPendingIssues,
this patch backup the value before the change.
Test plan:
Check some items out, specify a hourly loan for some.
Click on print > print summary and confirm the date due are correctly
formatted.
Followed test plan. Date + time display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The pref AddPatronLists does not work as expected if 'generic' is
selected.
Indeed a patron should be linked to a valid patron category (see the
constraint borrowers_ibfk_1 in the DB structure).
Test plan:
0/ Confirm that the AddPatronLists does not work as expected if you choose
the generic patron types.
1/ Delete all you patron categories and check that the interface invites
you to create one.
2/ Confirm that you are able to create a patron and to link it to a patron
category you have created.
I could not verify step 1/, because at least one Patron category
can not be deleted (Staff, since I'm logged in as a Staff patron
and you can not delete categories that are in use).
Tested 0/ and 2/
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the regressions introduced by the previous patches.
If you have tested all in once, you didn't see them.
It introduces library, category and "first letter" filters.
Test plan:
1/ On all pages impacted by previous patches + new order empty (link patron to
an order) + guarantor search
2/ Add / Select patron to the list
3/ Use the filters
4/ Confirm there is no regression
Tested together with other patches.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This column is not in used in the Koha code and could be removed.
Test plan:
Verify the branch is correctly displayed on the circulation history
(members/readingrec.pl) and that both reports Most-cisulated items
(cat_issues_top.pl) and Avg checkout (issues_avg_stats.pl) work as
before.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problems found.
Fixed wrong table name on updatedatabase.pl and a tab char.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Checked issues and returns are still working correctly.
There is no mention of issuingbranch in the codebase.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code is never used. The permission to delete a patron is now done
in members-toolbar.inc using CAN_user_borrowers.
It's the good way to do.
Test plan:
git grep CANDELETEUSER
should not return any result
Followed test plan. No CANDELETEUSER found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous patch removed the name column, it's a regression.
This patch reintroduces it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
The "common" template is improved to allow different type of picking:
"add" or "select".
The first one appends a patron to a list, the second one selects the
patron and close the result search window.
The members/guarantor_search.pl has completly changed but is quite the
same file as acqui/add_user_search.pl. Both should exist: they don't
belong to the same module (acqui vs members), the picking type is
different (add vs select) and the columns are not the same.
The changes in the common template are very powerful, it's now possible
to list the column we want! This will be very useful for further
reusability.
Before this patch, all patrons mathing the pattern were return. Now only
the first 20 are (depends on the DataTables selected value).
For QA: This patch introduces a new template plugin "To", for now it
permits to convert a perl structure to json. In the idea, it could
permit to convert foo to bar too.
Test plan:
1/ Verify there is no regression in the guarantor search. When the
selection has been done, all data from the guarantor should fill the
form in the "main address" section.
Note that the request is done when the search input in not empty and the
user stop to write for 1 sec.
2/ Verify there is no regression on the 2 other pages where this patron
search is used: link a patron to an order and to a basket (in the
acquisition module).
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When editing a Patron's messaging preferences or borrower attributes, one cannot
save changes because 'userid' is not given as a parameter.
It shouldn't, but the
Check_Userid($newdata{'userid'},$borrowernumber) -check must have it.
REPLICATE THE ISSUE:
1. Find a Borrower.
2. Go to the details-tab.
3. Under "Patron messaging preferences" click edit to edit just the messaging
preferences.
4. Just save, no need to make any modifications.
5. Observe the error "Username/password already exists"
This happens to all/most of the sub-forms in the Borrower's Details-view.
AFTER THIS PATCH:
Check_Userid() get the $userid from the new parameters, or if not present, from
the koha.borrowers-table.
TEST FOR REGRESSION:
1. Edit a borrower normally. Notice no errors.
2. Edit a sub-form (Alternate address/Patron messaging preferences). Notice no
errors.
DISCLAIMER: You are free to steal/rip/modify/hack this patch to your soul's
extent without my permission. As long as it makes to Koha I am happy.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Date sorting of charges under Patron -> Fines -> Account is done based
on formatted dates, so sorting is broken depending on your dateformat
system preference. This patch implements the standard "title-string"
date sorting method.
To test, apply the patch and view the Account tab. Test sorting of
charges under various settings of the dateformat system preference. Date
sorting should work correctly in all cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes sorting problem.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce, edit, index notice with utf-8 char and search for it
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 9811 removes useful code.
Actually the AddPatronLists pref is not sent to the template from
members/member.pl.
To fix this issue, we can use the existing not clean way, or compare the
syspref value directly in the template. This second solution is
implemented in this patch.
Test plan:
1/ Set the AddPatronLists pref to 'specific'
2/ On the patron home page (members/members-home/pl), the patron search
result page (members/member.pl after launching a search) and on the
checkouts page/patron search result (circ/circulation.pl after searching
a patron using the check out), verify that the patron category list is
the specific ones.
3/ Test there are no regression with the AddPatronLists pref set to
'general'.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described and fixes the problem.
Note: I am not sure if AddPatronLists makes sense -
if you set it to general patron types, it still preselects the
wrong category type (tried organization, a child patron category
was selected). Also the name is confusiong nowadays with the
Patron list feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. ensure that extended patron attributes are turned on in system preferences
2. find borrower which has fine to pay, and click on pay button
3. verify application error
4. apply patch and verify that application error is gone
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without patch:
-------------
Make payment for patron who has fines
Select the Pay Amount button and add a note in the note box.
Select confirm
Result: The note does not display in list
With patch:
----------
Result: The note displays in list
Bonus testing: The note is included in system logs as well (Home:Tools:Logs)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patron has guarantees, always display them on the patron summary,
even if the patron is of a type that ordinarily would have them.
For example, at present you can cannot directly add a guarantee to
a staff record the way you can do for an adult patron, but if you create
a juvenile patron and add a guarantor to it, you can override that
restriction. Note that this patch ignores whether that is strictly
desirable behavior.
To test:
[1] Create a juvenile patron. While editing it, make a staff
account a guarantor of the new patron.
[2] View patron details for the staff account. Note that the
juvenile patron is not displayed as a guarantee.
[3] Apply this patch.
[4] Refresh details for the staff account. The juvenile should
now show up.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Galen patch works as described. The way it's implemented seems sensible.
Whatever the reason why a patron has guarantes, it make sense to display
them. So it's better to check the count of guarantes rather than the
current patron type to decide to display guarantes.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small change, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This successfully fixes the problem observed when a patron has no
checkouts.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Makes the status column display "Overdue!" if overdue
* Fixes the due date formatting
* Sorts the checkouts by date due ( oldest to newest )
Note: I found no evidence that this data was previously sorted,
so I kept it simple. Sorting based on system preferences could
be a future enhancement.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This fixes the issues described for patrons with existing checkouts.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A patron's print summary should contain a list of checked out items
as it did in 3.16.2 and earlier.
Please note, as of 3.16.2 reserves were no longer part of the print
summary and thus are not part of this bug fixing patch.
Test Plan:
1) Find a patron with checked out items
2) Choose Print -> Print summary
3) Note the lack of a list of checkouts
4) Apply this patch
5) Reload the page
5) Print the summary again
6) Note the list of checkouts
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, apart from the missing status information
that Owen already noted on the bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It is not necessary for the patron statistics script to pass a colspan
value to the template. The number can be output using Template::Toolkit
syntax.
To test, view the statistics page for a patron. Confirm that the "Total"
cell in the footer spans the correct number of columns. Test with
various numbers of fields in the StatisticsFields system preference.
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you try to create a patron and enter an extended attribute value
which is required to be unique but exists in another record the error
you receive is not clear. It uses the attribute code instead of the
description. This patch adds description to the output.
To test you must have ExtendedPatronAttributes enabled.
- Edit or create an extended patron attribute and designate it a unique
identifier.
- Edit a patron and add a value to that attribute.
- Edit another patron and try to add the same value.
You should get an error which includes both the description of the
attribute you tried to modify and the value you submitted.
Signed-off-by: Christopher Brannon <christopher@debian.brannon.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and Qa script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When duplicating a patron the original patron's library should be
preselected.
To test, apply the patch and choose a patron to duplicate, noting which
library is set as their home library. Click the "Duplicate" button and
cnofirm that the patron's library is preselected on the patron entry
form.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Differences between circ-menu.tt and circ-menu.inc always crop up when a
new menu item is added--usually only to circ-menu.inc as happened with
Bug 9261.
Other sidebar differences are present due to differences in the patron
data passed by various patron-related script to their templates. This
patch also irons out some of these inconsistencies.
To test, apply the patch and check out to a patron whose record has more
than just basic data: othername, country, patron attributes, street
number, road types, etc. View the following pages and compare the patron
data and visible tabs to confirm that they match:
circ/circulation.pl?borrowernumber=X
members/boraccount.pl?borrowernumber=X
members/files.pl?borrowernumber=X
members/mancredit.pl?borrowernumber=X
members/maninvoice.pl?borrowernumber=X
members/member-flags.pl?member=X
members/member-password.pl?member=X
members/moremember.pl?borrowernumber=X
members/notices.pl?borrowernumber=X
members/pay.pl?borrowernumber=X
members/paycollect.pl?borrowernumber=X
members/purchase-suggestions.pl?borrowernumber=X
members/readingrec.pl?borrowernumber=X
members/routing-lists.pl?borrowernumber=X
members/statistics.pl?borrowernumber=X
tools/viewlog.pl?do_it=1&modules=MEMBERS&modules=circulation&src=circ&object=X
The only difference I've found which is not fixed by this patch is the
display of extended patron attributes in the sidebar of moremember.pl.
This is a piecemeal fix for a problem which really deserves a
centralized solution, but at least it gets us back to consistency for
the moment.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Going through all tabs shows consistency is back. A mid term solution should
implement this in a centralized way. Great job Owen!
No koha-qa errors btw.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just adjusts several POD stuff, and in a few cases
reorganizes a hash definition in order to use spaces instead of tabs
for the QA script to be happy.
Nothing important, really. This patch series just changes '.tmpl' for
'.tt'.
Regards
To+
PS beware that running the koha-qa.pl script can take lots of time on this one
:-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the file purchase-suggestions.pl with "suggestionsview => 1" for the template parameter.
In circ-menu.inc i changed the condition from "suggestions" to "suggestionsview" since it seemed to conflict with the existing variable suggestions (and in that case only highlighting the tab when there were suggestions).
Please note that I fixed the troubles with the tab "Fines" in a separate patch 9245.
Test plan:
1) Verify that "Purchase suggestions" does not light up as it should when clicked.
2) Install the patch.
3) Verify that the tab "Purchase suggestions" now actually light up when clicked.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised.
This patch makes shure that mancredit.pl, maninvoice.pl and pay.pl passes the value "finesview=1" that makes the tab active.
Test plan:
1) Go to a library user and the fines tab. Note that the "Fines" tab loses it's highlight when you click "Pay fines", "Create manual invoice" and "Create manual credit".
2) Install the patch.
3) Redo the first step and make shure that the left menu tab "Fines" is now highlighted all the time.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as advertised, no regression found on the rest of the tabs.
This patch modifies staff printslip.tt to take into account
caller. Also fixes similar problem on opac printslip.tt
To test:
staff
1. Print hold transfer slip
2. Print transfer slip
3. Print member slip
opac
4. Print self checkout slip
5. Update translation files, check new strings are present
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
