Patch fixes some smaller problems:
- Adds new notices to the it-IT installer (xt/sample_notices.t)
- Renames one of the classes used in the table to avoid double up
- Fixes POD of Bilbio.pm by removing a doubled up line
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Article Requests are somewhat similar to holds, but are not requests for
an item to check out. Instead, article requests are requests for a
photocopy of a particular section of a book ( most often ). This is very
common in academic libraries where researchers may request a copy of a
single article found in a journal.
This patch set adds the ability to place article requests in Koha. It
allows the control of what can be requested via the circulation rules.
Since article requests of electronic resources are not outside the realm
of possibility, the feature will check not only the items for
requstability, but the record itself as well ( i.e. both items.itype and
biblio.itemtype ).
Article requests can be placed for patrons from the opac and staff
intranet and can be viewed in most areas where holds are viewed ( e.g.
patron details, record details, etc ).
There is a script to view article requests in progress within the
circulation module. Article requests can be Open ( i.e. new ), In
Processing, Completed, or Canceled. The status of a given request can be
updated from this script.
Test Plan:
1) Apply the patch set
2) Run updatedatabase.pl
3) Enable the system preference ArticleRequests
4) Set up some required fields in:
ArticleRequestsMandatoryFields
ArticleRequestsMandatoryFieldsItemsOnly
ArticleRequestsMandatoryFieldsRecordOnly
5) Edit your circ rules, set article requests to 'yes' for something
6) Test the ability to add an article request from the opac ( required fields enforced )
7) Test the ability to add an article request from the staff interface ( required fields no enforced )
8) Note you can choose item level or record level requests
9) Change the rule to "record only"
10) Repeat 6 and 7
11) Note you cannot choose items
12) Change the rule to "item only"
13) Repeat 6 and 7
14) Note you must choose an item
15) Note that the 'new request' message is queued for each new request
16) Browse to /cgi-bin/koha/circ/article-requests.pl
17) Note requests are split by pickup branch
18) Test slip printing via the "Print slip" action
19) Process request vai "Process request" action
20) Note an email notice is queued for patron
21) Refresh /cgi-bin/koha/circ/article-requests.pl
22) Note request has moved to "processing" tab.
23) Complete request with "Complete request" action
24) Note message is queued for patron
25) Cancel a request, add cancelation note.
26) Note message is queued for patron
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New module to handle management of circulation to Housebound readers.
- Ability to create housebound profiles & scheduled visits for patrons.
- Ability to record users as Deliverers or Choosers (or both), using
extended patron attributes.
- Ability to link choosers and deliverers to individual delivery runs.
- 'Delivery Frequencies' are customizable through authorised
values ('HSBND_FREQ').
* koha-tmpl/intranet-tmpl/prog/en/includes/circ-menu.inc: add
Housebound menu if appropriate.
* Koha/Patron.pm (housebound_profile): New method.
* Koha/Patrons.pm (housebound_choosers, housebound_deliverers): New
methods.
* Koha/Patron/HouseboundProfile.pm: New File.
* Koha/Patron/HouseboundProfiles.pm: New File.
* Koha/Patron/HouseboundVisits.pm: New File.
* Koha/Patron/HouseboundVisit.pm: New File.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: New file.
* members/housebound.pl: New file.
* installer/data/mysql/kohastructure.sql: Add housebound_* tables.
* installer/data/mysql/sysprefs.sql: Add HouseboundModule syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref:
Add HouseboundModule syspref.
* installer/data/mysql/atomicupdate/housebound_tables.sql: New file.
* t/db_dependent/Patron/Borrower_Housebound.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: New file.
Test plan:
- Apply patch.
- Run atomic update script.
- Run Unit Tests (t/db_dependent/Patron/Housebound*)
- Optionally, add additional authorised values to 'HSBND_FREQ'.
- Switch on 'HouseboundModule' syspref.
- Ensure 'ExtendedPatronAttributes syspref is on.
- On patron pages, when editing, add some to the Housebound deliverer
and chooser groups.
- On a patron page, the Housebound menu should now be present.
- create housebound profile
+ ensure Frequency values seem pulled from 'HSBND_FREQ'.
- create 'housebound visits' (deliveries)
+ ensure chooser/deliverer lists are populated with patrons that
have the Chooser or Deliverer Attribute type.
- edit visits.
- delete visits.
- Switch off 'HouseboundModule'
- the Housebound menu should disappear
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [Followup] Rename test files.
* t/db_dependent/Patron/Borrower_Housebound.t: Rename to
t/db_dependent/Patron/Housebound.t.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: Rename to
t/db_dependent/Patron/HouseboundProfiles.t.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: Rename to
t/db_dependent/Patron/HouseboundVisits.t.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [QA Followup] Fix category_type ref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Replace
references to `category_type` with `categorycode`.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref AllowItemsOnHoldCheckoutSCO, so the current
AllowItemsOnHoldCheckout syspref can be decoupled for the SCO module, giving
the library more flexibility.
During upgrade, it gets its value from the original AllowItemsOnHoldCheckout syspref.
Sponsored-by: NEKLS
Signed-off-by: George <george@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This way it will get used for any languages.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Found in
installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch set adds a new table authorised_value_categories to store
authori(s|z)ed value categories into a separate table.
The problematic is explained on bug 15799 comment 4:
We need FK to the AV categories but some may not have authorized values
yet.
What does this patch set:
- Add a new authorised_value_categories table
- Populate it with known categories
- Update FK items_search_fields.authorised_values_category
- Create a new FK marc_subfield_structure.authorised_value (FIXME should
be authorised_value_categories instead)
They are some problems this patch set do not take into account:
- The .sql installer files won't insert correctly (will have to be
updated when this patch set will be ready to be pushed)
- All the categories (even the ones without authorized values defined)
are listed when you edit frameworks (marc_subfield_structure.pl)
- There is no way to delete a category (TODO). But to do so it would be
good to have a authorised_value_categories.is_internal field to mark
some categories as "cannot be deleted".
Test plan:
0/ Execute the DB entry to create and populate the new table and set the FK
1/ Create a new AV category from the admin module (admin/authorised_values.pl)
2/ Add/edit subfield linked to a AV category
(admin/marc_subfield_structure.pl)
3/ You won't be allowed to add AV for branches, itemtypes or cn_source.
They are used internally.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files still use WTHDRAWN instead of WITHDRAWN as an AV
category.
Test plan:
git grep WTHDRAWN installer
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files use COU and LAN instead of COUNTRY and LANG.
To uniformise these AVs, it would be good to use the same code.
Note that I do not think we should update existing installations
Carefully compared code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
What we currently have:
Koha/ElasticSearch.pm
Koha/ElasticSearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
What we want:
Koha/SearchEngine/Elasticsearch.pm
Koha/SearchEngine/Elasticsearch/Indexer.pm
Koha/SearchEngine/Elasticsearch/QueryBuilder.pm
Koha/SearchEngine/Elasticsearch/Search.pm
Test plan:
% git grep -i Koha::ElasticSearch
% git grep ElasticSearch|grep -v Catmandu::Store::ElasticSearch
should not return any result
Do a full reindex and search for records
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The yaml file is not used to populate ES mapping tables (search_field,
search_marc_map and search_marc_to_field) when doing a fresh install.
We need to insert them, otherwise ES will be unusable.
Test plan:
Create a new install and confirm that the ES tables (search_field,
search_marc_map and search_marc_to_field) are correctly populated.
Bonus points: Use an older DB (prior to 3.23.00.050), execute the
updatedatabase.pl script and confirm that the ES table are correctly
populated
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
remove a 'my'
next if not defined subscriptions.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
A recent change in the 'subscription' table structure highlighted a
problem in a DBRev upgrade (3.23.00.006). As it adds a new column, when
upgrading from (say) 3.20.00.000 the code/schema (correctly) expects the
subscription.itemtype column to exist. But it is not created until DBRev
16.06.00.025.
To reproduce:
- Have a clean 3.20.00 DB loaded into kohadevbox
- Checkout current master
- Run:
$ perl installer/data/mysql/updatedatabase.pl
=> FAIL: The upgrade procedure fails due to missing colum.
The solution: rewrite the updatedatabase.pl entry using plain DBI
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
In a database update we alter the letter table, making a column
(branchcode) not be able to contain NULL values.
However if it already does, this SQL fails. So before changing the
column we change the NULL values
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: DBD::mysql::db do failed:
Invalid use of NULL value [for Statement "
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: ALTER TABLE letter MODIFY
COLUMN branchcode varchar(10) NOT NULL DEFAULT ''
[Tue Sep 20 19:08:10 2016] updatedatabase.pl: "] at
/home/mtompset/kohaclone/installer/data/mysql/updatedatabase.pl line
12638.
Reproduce:
on an ubuntu 16.04 LTS machine with MySQL 5.7 install git koha
development environment.
...
git checkout -b my_3.18.x origin/3.18.x
drop database koha_library;
create database koha_library;
quit;
web install all sample data
(ignore some issues with sample data, and one with mandatory)
git checkout -b bug_17234 origin/master
git bz apply 17292
git bz apply 17320
git bz apply 17260
git bz apply 17234
web install
Two warning messages are expected output from upgrade process, but
the above message is not.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Did not follow the test plan, but the changes make sense
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This fixes a tiny typo in sysprefs.sql that kept all
systempreferences from being installed.
To test:
- Create a new koha database, run the web installer
- Verify that all systempreferences have been loaded
select count(*) from systempreferences should be
no less than 553
or
- Truncate your systempreferences table
- Verify that the repaired sysprefs.sql file loads
without error
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new enhancement will add the ability to change the default holdings
sort on OPAC displays to be by library, instead of item type.
This patch adds a new pref OPACHoldingsDefaultSortField with 3 different
possible values:
- Item type
- Home library
- Holding library
Note that if OpacLocationBranchToDisplay is set not to display home libraries,
unexpected behaviors might happen if OPACHoldingsDefaultSortField is set to
"Home library", same for "Holding library".
Test plan:
- Confirm that the default value for OPACHoldingsDefaultSortField is
'first column' after executing the DB entry and that there is no
change in the behavior (first column is used to sort the holdings
table on the detail page).
- Set OpacLocationBranchToDisplay to both and play with the different
values of OPACHoldingsDefaultSortField
=> Confrm that the default column used to sort the table is correctly
changed
- Set the pref SeparateHoldings on
=> Confirm that both tables (Holdings and other holdings) are sorted using
the OPACHoldingsDefaultSortField value.
Sponsored-by: University of the Arts London
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See http://hea.koha-community.org/, the countries are filled is wrong
values.
If we decide to update the free text with a dropdown list, we need to
handle these wrong data.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This will avoid syntax problems with Hea when a user will fill this 2 sysprefs
The default choice for UsageStatsLibraryType and UsageStatsCountry is 'empty'
Test Plan
---------
1. Create a new Koha install
2. Go to the 'Administration' page
3. Go to 'Global system preferences'
4. Go to 'Administration'
5. At the end of this page you should see a dropdown menu for
- UsageStatsCountry with all countries
- UsageStatsLibraryType with all type of library
They both should be empty by default.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a complete list but is a start
Lots of new strings to translate :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should at least report some grand totals when fixing fine records.
This patch also includes some cosmetic whitespace swapping.
Turned one last into an if statement.
Added a copyright statement too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The location of the script in misc/maintenance would be fine for
running it from the command line. But it will be a problem for several
install types when running it from the web installer.
Files from misc/maintenance go to bin/maintenance in a package install,
not to mention other installs than a dev install.
This patch moves the script to installer/data/mysql. Already there are two
other scripts run by upgradedatabase. I would rather move these three
scripts somewhere else, but we c/should do that on another report.
Fixed a small typo in a message too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
(plus warnings for 16.05+ production setups possibly already affected)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch only fixes encoding of file
installer/data/mysql/it-IT/necessari/sample_numberpatterns.sql
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to de-DE files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to it-IT files
Checked marc21 and unimarc files
unimarc_relatorterms.sql had bad encoding, others minor
errors
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mostly fixes bad values in auth files ( '' -> 0 )
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to pl-PL files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to nb-NO files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
More changes to es-ES files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Needs Bug 13669
This patch fix web installer for
de-DE, es-ES, fr-CA, nb-NO and pl-PL
To test:
1) Apply patch
2) Try web installer for any/all listed languages.
a) de-DE, es-ES, fr-CA and pl-PL
There must be no problems for marc21 + all sample files
b) nb-NO
There must be no problems for normarc + all sample files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Needs Bug 13669
Rewrite autorites_norme_unimarc.sql to
use only one INSERT IGNORE.
New load method complains about duplicate keys,
and both auth files are mandatory!
Also removed blank space from sample_labels.sql
Tested with unimarc_complet and all sample files.
To test
1) Apply the patch
2) Try fr-FR web installer, unimarc_complet + all sample files
There must be no errors
Don't know if fr-FR marc21 and unimarc_lecture_pub are used,
need a look from french users.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When enabling the makePreviousSerialAvailable syspref, the previously
received serial's itemtype is set as defined in the subscription.
(Please note that the item-level_itypes syspref must be set to specific item.)
It is also made available.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the OPAC -> Advanced Search, the Language drop down menu incorrectly
lists Romanian as "Român (Romanian)" while the correct value (as reported
by Barry Cannon) is "Română (Romanian)".
This patch fixes that:
a) for _new_ installations by modifying
installer/data/mysql/mandatory/subtag_registry.sql (loaded by the web
installer when koha is installed), and also
b) for _existing_ installations by adding an atomicupdate file in
installer/data/mysql/atomicupdate/
Test plan:
1) In the OPAC, go to Advanced search (cgi-bin/koha/opac-search.pl).
2) In the 'Language' drop down menu, observe that the value for Romanian
is "Român (Romanian)".
3) Apply the patch, and run installer/data/mysql/updatedatabase.pl.
4) Refresh the Advanced search page in the OPAC. Confirm that the patch
worked, i.e. the Language drop down menu lists Romanian as
"Română (Romanian)" (notice the added 'ă').
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Default timeout is now 12000000 seconds == almost 139 days !
Surely, your session will be shorter. But we should lower this
value.
Balancing usability and security, I propose 1d (1 day) now.
Current pref value will be affected only if it is NULL or equal
to the old default.
Test plan:
Check your current value. Optionally change to NULL or 12000000.
Run the dbrev and see what happens.
Beware of cached values while testing or flush the cache.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch should deal with comment #6's point of where a user who
has create, but not execute permissions, would lose delete ability.
Users with create and execute permissions would already have delete
as well.
TEST PLAN
---------
1) Back up db
2) drop database koha_library;
3) create database koha_library;
4) web install with all sample data with system user
6) log into staff client as system user
7) make sample koha admin user a superlibrarian
8) set username and password for sample koha admin user
9) log out and log in as koha admin
10) Create a user (USER_A) with permissions:
create_reports and execute_reports.
11) Create a user (USER_B) with permissions:
create_reports, but not execute_reports.
12) Create a user (USER_C) with permissions:
execute_reports, but not create_reports.
13) Create a user (USER_D) with no report permissions.
14) Run the atomic update.
15) Check USER_A permissions
-- should have delete_reports
16) Check USER_B
-- should have delete_reports
17) Check USER_C
-- should NOT have delete_reports
18) Check USER_D
-- should NOT have delete_reports
19) run koha qa test tools
20) restore db
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This splits off the delete capability from the create reports permission.
From a UI perspective there were CSS issues, that this patch set hackily
bypasses. Perhaps someone else can amend this enhancement with the required
changes so that the extra column at the beginning of the table can be
removed when the user does not have delete capability.
TEST PLAN
---------
1) back up db
2) apply patch
3) ./installer/data/mysql/updatedatabase.pl
-- should run without issue.
4) in mysql:
> drop database ...
> create database ...
-- totally blanks it for fresh web install
5) run web install
-- installing should have no issues
6) go to a patron
7) set permissions
8) expand the reports permission
-- should have delete reports now
9) click help and scroll down to
'Granular Reports Permissions' right at the bottom.
-- there should be a new delete_reports section
10) Head over to guided reports and build a few reports.
-- as system account user, delete stuff should all be visible.
11) Find a patron, set all permissions, except delete reports.
12) log out and then log in as the modified patron
13) Head over the save reports
-- none of the delete options should be available to the user.
14) run koha qa test tools
15) restore db
Followed test plan. Additionally tried to delete using params in URL
(not possible, OK)
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Path::Tiny::slurp is considered better to use than File::Slurp.
RM Note: The package version in wheezy is too old, the package version
in jessie is just fine and should be added to the community
repo if wheezy will be supported for the coming release.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If we use eval instead of do for our .perl atomic update files, it will
allow developers to put in the exact code that should go into
updatedatabase.pl. The problem with do is that none of the variables
defined in updatadatabase.pl are available, whereas with eval they are.
Test Plan:
1) Apply this patch
2) Create a .perl file in atomicupdates with the following in it:
say "DBversion: $DBversion";
3) Run updatadatabase.pl
4) Note the output
5) Add a syntax error to your atomic update
6) Run updatedatabase.pl
7) Note the error is displayed
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adding the default is fine for new records; we also should take care
of the pending existing ones.
Trivial addition to atomic update file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested the dbrev again with existing unapproved reviews.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The reviews.approved column had a default value set to NULL.
It does not make sense, the default value should be 0, this will avoid
to have to specify the approved value when creating a new review.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Add 'OPACSuggestionMandatoryFields' syspref definition plus
an atomic DB update for the new preference.
Signed-off-by: barbara johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that we could also update the syspref for existing installs
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
After a couple comments regarding the default value I picked for the
new syspref, I've decided to set it 0, as libraries interested on the
fetarue will just enable it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref 'HoldsLog' which is to be used for controlling
holds actions logs.
Sponsored-by: NEKLS
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new column for the action_logs table. It is
called 'interface' and it is intended to store the interface in which
the action was performed.
Sponsored-by: NEKLS
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This .sql~ backup file should not have been committed.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With this patch all sample/defintions .sql files are updated and translated into Italian
(if you select italian during web installation).
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch change 'created_on' virtualshelves column to
datetime type
To test:
1) Apply the patch
2) Run updatedatabase.pl
3) Verify type of 'created_on' column
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Web install on Ubuntu 16.04/Mysql 5.7 fails.
This patch makes small changes to make installation
possible to kohastructure.sql and some sample files.
Sample values for quotes table can't have '0000-00-00 ...' values
nor NULL values, now() is perhaps an option.
Depends on Bug 16572
To test:
1) System with MySQL 5.7, for example Ubuntu 16.05
2) Apply 16572
3) Try web install, it fails
4) Apply this and next patch
5) Try again, now it succeed
This is only for English install, i18n files needs revision
I can do that if this is accepted.
Perphaps a change is needed to updatedatabase.pl
Ammended patch, 'created_on' field on virtualshelves
can't be timestamp default null, mysql 5.5 complains
that only one timestamp column can be defined as
default not null. Changed to 'datetime' type.
Can provide followup with updatedabase change,
but need an opinion if this type change makes sense.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
followup to previous patch.
This patch fixes linkid value. It was set to '', but
declared as tinyint.
Mysql < 5.7 replaced this with nearest right value, i.e 0
Mysql 5.7 gives error here.
Also some normalization, all lines with data begins with two tabs
To test:
On top of Bug 16572 and previous patch
1) Run webinstaller
2) Add mandatory values
3) There must be no problems on MySQL 5.7
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options
Sponsored by:
Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Internal signoff.
Signed-off-by: Alexis Rodegerdts <arodegerdts@wallawallawa.gov>
Signed-off-by: Dwayne Nance <dnance@ebsco.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
