Bookseller should be vendor to match our preferred terminology.
To test:
* Run:
prove t/db_dependent/Acquisition/GetBasketGroupAsCSV.t
* Add a basket with at least one order line
* Close basket and add to a basket group
* Close the basket group
* Export as CSV
* Verify headers include "Bookseller"
* Apply patch, restart all
* Repeat export, it should now say "Vendor"
* Rerun tests
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Updates ''{cash_register}'' to '{cash_register}'
To test:
I believe this is not actually testable, as cash registers
can only be archived and not deleted?
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The too many checked out message can be very confusing for librarians
when the limit specified is more or less than the number of checkouts
the patron already has. We should make it clear to the librarian that
his is only counting certain types of checkouts by giving them the
issuing rule criteria used.
Test Plan:
1) Apply this patch
2) Try to check out more items than the circ rules allow for
regular and on-site checkouts
Signed-off-by: Eric Gosselin <eric.gosselin@inlibro.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch allows the tab key to indent lines as well as trigger autocomplete.
Test plan:
1) Apply patch, navigate to reports and create a new SQL report
2) Click in the text editor and press tab, it should indent and then trigger the autocomplete options
3) Type something to select from the autocomplete box and press tab - it should autocomplete that option
4) Type any word and then press space. Now press tab and it should indent again
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan, with the previous 2 patches applied:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on 'View' in front of 'Current renewals'
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item: 39999000003192
6) Repeat 1) to 3). Notice it shows 2 current renewals even tho only 1 corresponds to the currently active check out
7) Renew again. Notice it shows 3 current renewals even tho only 2 correspond to the currently active check out
7) Apply this patch. Notice it now only shows 2 current renewals
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice it shows the renewals as expected
5) Return the same item 39999000003192
6) Repeat 3). Notice it never loads renewals and network console shows HTTP error 400
7) Apply this patch. Repeat the test plan. Notice the 'Current renewals' no longer shows for the item because it is no longer checked out, so whatever past renewals are no longer 'current'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
'Current renewals' is always showing, even if empty.
Test plan:
1) Checkout an item to Koha user, barcode 39999000003192
2) Renew that barcode
3) Visit the items page of the biblio record, click on "View" in front of "Current renewals"
/cgi-bin/koha/catalogue/moredetail.pl?biblionumber=76
4) Notice all items have the 'Current renewals' label entry, but only the checked out item in step 1) has the 'Current renewals' label entry
5) Apply patch. Notice only the item with current renewals is showing the 'Current renewals' label entry with the respective value.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two preservation module system preferences so that
they offer dropdowns of "Not for loan" values instead of requiring entry
of a specific code.
The patch also adds a missing "." at the end of one preference
description.
To test, apply the patch and restart services.
- Go to Administration -> System preferences.
- Search for "preservation"
- Check that the "PreservationNotForLoanDefaultTrainIn" and
"PreservationNotForLoanWaitingListIn" preferences have dropdowns
offering "Not for loan" values.
- Confirm that your choices are correctly saved.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes some inconsistencies in the record matching rules
administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Some controls on this page have been updated to use Bootstrap link style
with Font Awesome icons added.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Record matching rules
- New record matching rule
- Edit record matching rule
- Delete record matching rule
- Test the process of adding new match points and new match checks,
and removing match points and match checks.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates two system preferences, "OPACUserJS" and
"OPACUserCSS" so that the "here" links in the description instead read
"library administration".
To test, apply the patch and go to Administration -> System preferences.
- Search for "opacuser"
- The descriptions of the "OPACUserJS" and "OPACUserCSS" preferences
should include the phrase "...can be defined in library
administration," with "library administration" leading to the correct
page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change displays a warning message instead of the patron image
upload feature in the patron record when the patron is missing the
cardnumber.
Without this change, the staff user can try to upload a patron image
but it will silently fail. This change warns the staff user of the
cardnumber requirement for patron image upload.
Test plan:
0. Apply the patch
1. Enable the "patronimages" system preference
2. Go to http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
3. Click "Add" over the patron image placeholder
4. Note the "Upload photo" button and the ability to take a patron photo if your
device has a camera
5. Remove "cardnumber" from BorrowerMandatoryField
6. Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
7. Edit the patron to remove the cardnumber
8. Click "Add" over the patron image placeholder
9. Note that no patron image upload features appear. Instead, only
a warning appears stating that the patron needs a cardnumber before
the patron image upload can be performed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To reproduce:
1. Open any biblio and edit that record.
(select "Edit record" from the "Edit" drop-down menu).
2. Check that selecting the text in any draggable block input/textarea
fields with a mouse is not possible - it starts dragging instantly.
3. Apply the patch
4. Make sure that draging is activated only when you click
on the "::" icon in front of the dragged item. And text selection
works correctly.
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Run any page that contains the "Search patrons" search bar through an HTML validator and you will see a lot of:
Stray start tag span.
Stray end tag span.
2. Apply patch
3. Try step 1 again, no more errors from the HTML validator.
4. Make sure the patron searches still work when limiting by 'Search field'.
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Add a value to SMSSendDriver like 'Emial'.
2. Go to BorrowerUnwantedField and attempt to hide "Mobile phone number (smsalertnumber)"
3. Go to members/memberentry.pl and see the field is not hidden.
4. APPLY PATCH
5. Try step 3 again and this time the field should be properly hidden.
Note: This patch also includes some indentation changes.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Update the staff interface and OPAC XSLT files to use
"Online resources" as the label in search results, instead of
"Online access". This matches the label used in the detail page
for a record.
Test plan:
1. Search for perl in the staff interface and OPAC (or add to
an existing record a URL to 856$u with 4 for the first
indicator).
2. For any search result that displays the "Online access" label,
view the detail page for the record.
3. Note that the detail page uses the label "Online resources".
4. Apply the patch and restart_all.
5. Repeat steps 1 and 2.
6. Note that the search result pages now show "Online resources" for
the label, matching the detail page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Steps to reproduce:
1. On cataloguing, open the 007 builder.
2. Choose material type 'Video recording'
3. On 04 choose g - Laserdisc
4. Click save
=> SUCCESS: 'g' correctly shows on the 007
5. Edit the 007 again
=> FAIL: on 04, 'g - Laserdisc)' is displayed
6. Apply this patch
7. Repeat 4 and 5
=> SUCCESS: no trailing ')'
8. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch revises the wording of the warning which is displayed on the
'About' page when the 'OPACPrivacy' system preference is enabled but the
'AnonymousPatron' preference is empty. The new phrasing is hopefully
more clear.
To test, apply the patch and go to Administration -> System preferences.
- Search for 'AnonymousPatron' and enter a borrowernumber if necessary.
- Log in to the OPAC and click the 'Privacy' tab in the left-hand
sidebar of the user summary page.
- Set your privacy rule to 'Never'.
- Return to Admnistration -> Sytem preferences in the staff interface.
- Search for 'OPACPrivacy' and set it to 'Allow'.
- Clear the borrowernumber from the 'AnonymousPatron' preference.
- Go to the 'About" page and open the 'System information' tab.
- You should see an error message at the bottom:
"Some patrons have requested privacy after their items are checked in,
but the AnonymousPatron preference is not set correctly. Set it to a
valid borrower number or checkins for these patrons will fail."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch corrects incorrect capitalization in the last-borrower
include file. The string his hidden except to screen readers, so visual
confirmation isn't straightforward. Viewing the diff should be enough to
confirm this single character change.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Same patch as
commit bee2b3d33e
Bug 33949: Fix display of old checkouts if no checkouts exist
But for the staff interface.
"""
If we pass an empty array from the perl controller, we retrieve an empty
string from the template, and the merge does not work.
This patch fixes the following bug:
Pick a patron without checkout history
Check them an item out and check it in
=> The table is empty, whereas it should display the item that has been
checked in.
"""
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha::Patron->issuer is not covered by tests!
Test plan:
1. Set RecordStaffUserOnCheckout to "record"
2. Check an item out and in to a patron
3. Go to their circulation history
=> Without the patch you get an error
=> With this patch applied the table displayed correct. The "checkout by" column contains the name and the link to the librarian
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Make some holds on a record and make sure some are set to expired.
2. Go to to reserve/request.pl?biblionumber=X for the biblionumber
3. Try updating something besides the expiration date. i.e. Pickup library
4. Click Update hold(s)
5. Notice the expirated holds have lost their expiration date.
6. APPLY PATCH
7. Try steps 2-4 again, this time the expiration date shold be retained.
8. Make sure Table settings still work and you can properly hide columns.
9. The hold expiration date should be hide-able.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add two requirements when registering a new patron:
- A child patron must have a guarantor. This is controlled by
a new syspref ChildNeedsGuarantor.
- A guarantor cannot be a guarantee.
Test plan:
1. Add a child patron without guarantor or child patron with guarantee
as guarantor succesfully.
2. Apply this patch.
3. Add a child patron as a guarantor.
=> Error is raised.
4. Turn syspref "ChildNeedsGuarantor" ON.
5. Add a child patron without a guarantor and error "Child needs a
guarantor" is raised.
6. Add guarantor. Guarantor can either be existing patron or added with
"Contact" section.
=> Save without errors.
Also prove t/db_dependent/Koha/Patron.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds a note to the CookieConsent and CookieConsentedJS
system preferences to link to the HTML customizations page and hint at
which customization should be used to affect the components governed by
the preferences.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For partial receives with items created on order, the
aqorders_items table was not correctly updated when only
some of the ordered items were received.
To test:
1) Create a basket with creating items on order
2) Create an order line with 3 items
3) Close basked
4) Receive shipment and create invoice
5) Receive your created order line
6) Edit first item displayed, add barcode
7) Check checkbox and receive
8) Verify the order line has been split 2:1
9) Receive again - notice all 3 items are showing.
We should only see the remaining 2
10) Undo receive
11) Apply patch
12) Repeat steps 5)-9)
13) Verify that in step 9) only the remaining 2 items display now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Check an item in with already a confirmed hold
2) Cancel the hold, it was cancelled without possibility to choosing a
reason
3) Apply this patch and do it again, you must see an input to choose
your cancellation reason (list from VA)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Have some checkouts
2. Go to the issue-table and select some of those checkouts and check them in.
3. Look at the tab, Checkouts(X)
4. This is not updated and now shows an incorrect number of checkouts.
4. APPLY PATCH, clear browser cache/
5. Try again, now when the table reloads the 'Checkouts(X)' tab should be correctly updated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the Renew and Check-in buttons so that they have
icons matching the ones used for the Renew and Check-in search tabs in
the header.
The patch also moves the Renew button so that it is next to the Renew
all button. I think this makes more logical sense. So the order is:
- Check in selected items
- Renew selected items
- Renew all
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. APPLY patch, clear browser's cache
2. Have more than 1 checkout issued to a borrower.
3. Load the checkout table on circ/circulation.pl
4. Notice that there is now 'Renew selected items' and 'Checkin
selected items' button.
5. Play around with each making sure that they work as excepted when
checkouts are checked in either the 'Check in' or 'Renew' columns.
6. Uncheck everything in the 'Renew column', the 'Renew selected items'
button should be disabled.
7. Uncheck everything in the 'Checkin column', the 'Checkin selected
items' button should be disabled.
8. Try unchecking some of these to make sure the Renew/Checkin button is
properly disabled when no related checkboxes are checked.
9. Try using the select all/none options at the top of both the 'Renew'
and 'Checkin' columns. Make sure the 'Renew selected items' and
'Checkin selected items' become properly disabled/enabled.
10. Make sure the 'Renew all' button still works properly.
11. Do the test plan of 5th patch "Make sure renew/checkin selections"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kelly <kelly@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds the missing subfields h and x to field 583 for
the detail XSLT in the staff interface.
Test plan:
0. Apply the patch and koha-plack --reload kohadev
1. Go to http://localhost:8081/cgi-bin/koha/cataloguing/addbiblio.pl?biblionumber=29
2. Click on tab "5"
3. Scroll down to 583 and click on "ACTION NOTE" to expand subfields
4. Fill in using the following example:
583 0#$adowngraded$c19910110$hJoe Smith$otitle$xfrom secret FRD to confidential NSI
5. Click "Save"
6. Note that the "Action note" now shows "Joe Smith" and "from secret
FRD to confidentail NSI"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Administration > Did You Mean
2. Attempt to drag and drop plugin options.
--> Confirm that they are not draggable
3. Apply patch and clear browser cache
4. Reload the page
--> Confirm that drag-and-drop now works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckHelpMessage system preference into HTML
customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckHelpMessage
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckHelpMessage is now stored there.
- The HTML customization entry form should offer SelfCheckHelpMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckHelpMessage HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and click the "Help" link at the
top.
- On the help page, confirm that the SelfCheckHelpMessage content is
shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckHelpMessage." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SelfCheckInMainUserBlock system preference into
HTML customizations, making it possible to have language- and
library-specific content.
To test you should have some content in the SelfCheckInMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SelfCheckInMainUserBlock is now stored there.
- The HTML customization entry form should offer
SelfCheckInMainUserBlock as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SelfCheckInMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self check-in system and confirm that the
SelfCheckInMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SelfCheckInMainUserBlock." It should return no results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the SCOMainUserBlock system preference into HTML
customizations, making it possible to have language- and
library-specific content.
The patch also makes a minor fix to CSS in order to get the "Back to
top" link to show up correctly in self-checkout and self-checkin.
To test you should have some content in the SCOMainUserBlock
system preference before applying the patch. Apply the patch, run the
database update process, and rebuild the OPAC CSS.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from SCOMainUserBlock is now stored there.
- The HTML customization entry form should offer SCOMainUserBlock
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the SCOMainUserBlock HTML customization and add unique
content to the "fr-FR" tab.
- Log into the self checkout system and confirm that the
SCOMainUserBlock content is shown there.
- Switch to your updated translation and confirm that the content you
added for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"SCOMainUserBlock." It should return no results.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Removes two occurrences and a commented one.
Test plan:
[1] Go to cataloguing editor. Open dev console. Clone 500.
[2] Go to Admin/Did you mean. Try to toggle options.
With this patch it works. Without this patch, JS errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Place a hold
2. Check-in an item of the held record
3. No hold modal 😱
4. APPLY PATCH
5. Hold modal!!!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves form any staff_searchable attribute being automatically
included in the the Standard patron serch, to allowing the librarian to choose.
Current searchable attributes will be marked as 'searched_by_default'
To test:
1 - Add a searchable patron attribute type
2 - Add some values
3 - Confirm they are searched in a 'Standard' patron search
4 - Apply patch
5 - Go to admin - >patron attribute types
6 - Note new 'Searching' column
7 - Confirm attribute is 'Searched by default'
8 - Confirm searches work as before
9 - Edit the attribute type
10 - Uncheck 'searched_by_default'
11 - Save
12 - Confirm attribute not searched in 'Standard' search
13 - Select the attribute in patron search dropdowns
14 - Confirm it is correctly searched
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement allows libraries to modify an existing orderline and increase the quantity in the order. The quantity is increased by adding more items to the order, through the usual Item for which is visible when adding or modifying an order.
To test:
1. Ensure you have a budget, fund, vendor etc. to use the Acquisitions module
2. Open a new basket. Make sure you do NOT check the 'orders are standing' option
3. Add an order to the basket using any method. Add an item or more to this orderline and save the order to the basket
4. Click Modify to edit the orderline
5. Notice the quantity text field. Try to directly change this number. You'll get an error pop-up and be redirected back to the basket.
6. Apply the patch, restart services, refresh the basket page
7. Click Modify to edit the orderline
8. Notice the item form and Items list table is visible with your existing item(s) for this order. There should be no Action buttons as actions can't be done on an existing item order.
9. Confirm you are able to add more items to the Items list and to the order by filling out the form and clicking 'Add item' as normal. Confirm the quantity increases accordingly.
10. Confirm the Edit and Delete buttons for newly added items work as expected
11. Save and confirm the quantity for the orderline has increased
12. Confirm this behaviour persists with the other methods of adding new orders to a basket
Sponsored-by: Pymble Ladies' College
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Perltidy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the OpacSuppressionMessage system preference into HTML
customizations, making it possible to have language- and library-specific
content.
To test you should have some content in the OpacSuppressionMessage
system preference before applying the patch. Apply the patch and run the
database update process.
- In the staff interface, locate a bibliographic record and open it for
editing.
- Under tab 9, tag 942, change subfield n, "Suppress in OPAC", to "Yes"
and save the record.
- Go to the OPAC and try to navigate directly to the bibliographic
detail page for that record:
/cgi-bin/koha/opac-detail.pl?biblionumber=X
- You should be redirectd to the "Blocked" page. Under the message "You
are not authorized to view this record" you should see the content
which was previously in the OpacSuppressionMessage system preference.
- In the staff client, go to Tools -> HTML customizations and verify
that the content from OpacSuppressionMessage is now stored there.
- The HTML customization entry form should offer OpacSuppressionMessage
as a choice under "Display location."
- Update and reinstall active translations (for instance fr-FR):
- perl misc/translator/translate update fr-FR
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Edit the OpacSuppressionMessage HTML customization and add unique
content to the "fr-FR" tab.
- Go to the OPAC and switch to your updated translation. Try to view
the suppressed record again and confirm that the content you added
for your translation shows up correctly.
- Go to Administration -> System preferences and search for
"OpacSuppression." The description of these preferences should show an
updated message about using HTML customizations to create
OpacSuppressionMessage content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>