* switching from "Payment Note" to "Payment note"
* replaced tabs by 4 spaces in lines just before and after this fix, for consistent indenting
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Code will also respect notes when using the "Writeoff All" button but WILL NOT when using either the "Pay Amount" or "Pay Selected" buttons Fixed uri encoding of arguments
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Patch reworked from Elliot Davis' original patch - but using bootstrap instead of YUI.
This patch adds the ability for catalogers to save and continue editing when adding new biblios.
To Test:
Select an existing item or create a new item in cataloging using your favorite framework.
Edit the bib
From the save menu in the dropdown, select the new option of "Save and continue editing"
If you are missing required fields you should still be prompted to fill them in before saving
Once all required fields are in place you should be allowed to save, and you will be redirected to tab 0.
The original patch claims to redirect to the original tab, but I never observed that behaviour from it - this patch merely takes what was in the original and makes it boostrap.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Apply the patch
- Go to <intranet>/cgi-bin/koha/circ/circulation-home.pl
- Verify that is says "There are no pending offline operations."
- Sign off
Or just have a look at the patch...
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is a string patch that fixes the typos in the patron
permission help file.
To test:
* go to a patron record
* click 'set permissions' under more
* click 'help'
* confirm that text is right
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Many templates have instances where the path to the prog template is
hard-coded. Now that interface and theme template variables are
available everywhere these paths should be corrected to use them.
Image paths corrected:
- 'Patron image missing' image on circulation pages
- 'Locked' icon on fund planning page
- Tag and subfield edit icons on the authority, biblio editor, and batch
item modification pages (Clone tag, delete tag, clone subfield,
delete subfield, move subfield)
- 'Loading' icon when importing frameworks
Audio file paths corrected:
- Sounds for circulation.pl and returns.pl
Paths to DataTables assets corrected on:
- Transfers to receive report
- Holds queue report
- Holds awaiting pickup report
- Patron detail page (moremember.pl)
- Patron circulation history
- Update child to adult patron page
- Process offline circulations
- Catalog by item type report
- Serials statistics wizard
- Serial claims page
- Koha news
- Notices
- Batch patron modifications
Path to progress bar assets corrected on:
- Process offline circulations page
- Progressbar include file
- Stage MARC imports
- Manage MARC imports
- Local cover image upload
Other image paths:
- "Approved" checkmark image on tags review page
- Table sort icons on lists page
- Feed icon on OPAC search result page
- "Loading" image for OPAC plain MARC view
Path to ratings JavaScript on OPAC detail and results pages
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Checked all the pages modified by this patch, no problems noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- Remove "all" occurrences (those I found!) of dateformat_*
From now the only way to get the date format is a string comparaison
(dateformat == "metric")
Checked with the command:
git grep "\(dateformat_us\|dateformat_metric\|dateformat_iso\)" | grep
-v translator
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tested all the datepickers I could find, looks good.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some sites split tags on spaces, some on commas. Since Koha splits on a
comma, we should make that clear to the patron. This patch adds
additional text to the "New tag(s)" label.
To test, enable TagsEnabled, TagsInputOnDetail, and TagsInputOnList.
Click "Add tag" on both OPAC search results and an OPAC detail page.
Confirm that the revised label appears correctly.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass. There are some more places where we can
add tags to multiple records at once, I noted them on the bug.
http://bugs.koha-community.org/show_bug.cgi?id=10259
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Well, not only typos. There is also a NEW update for
006/8 Music on April 2013. And 3 missing values in 006.
Revised descriptions and labels, source LOC page.
Strings spell checked.
To test:
1) Apply the patch
2) Test that MARC21 006 and 008 value builders works
properly.
Small string changes.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
XML changes only, passes all tests.
Contains string changes, so should go into 3.14.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch close 2 option tags in unimarc_field_115a.tt and unimarc_field_116.tt.
To test :
- in a UNIMARC Koha instance, edit a record
- open the plugin for 115a subfield
- check the "Form of release - visual projection, motion picture" option
list is correct, especially the value "other film type"
- open the plugin for 116 field
- check the "Technique (prints) 2" option list is correct, especially
the value "lithography"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I did not test this in Koha, but it's a simple change of one character
which I'm comfortable with signing off on.
I don't know if this counts as a string change or not, since the string
was previously mixed with a malformed tag.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and fixes an obvious problem in the HTML.
I checked the po files - currently the strings appear as:
"other film type/option> %s "
So in theory it's possible to translate them correctly even
if the standard templates now are not correct.
Probably has to wait for 3.14.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In subscription-add.tt dropdown list for periodiciy, the description for 9 value should be "2/year" (2 issues each year)
At present, if the option value is selected, it is "2/years".
This patch supresses the "s" after "year".
To test :
- in a subscription, change periodicity to "2/year"
- save the subscription
- reopen it and check the value is labelled "2/year"
Signed-off-by: David Cook <dcook@prosentient.com.au>
Trivial change. Works as described.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Using another existing string 'Apply filter' we are now
able to cancel the filter... and apply it... and cancel it
again... and so on.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds allbaskets parameter to GetBasketsInfosByBookseller. (Only used in booksellers.pl now)
Normally, all 'active' baskets are shown. With allbaskets=1 all baskets :)
In the template I had to rename a loop var supplier to supplier1 to resolve
name conflict between template vars.
In the template I added the string: Cancel filter.
Note that this string is already translated:
msgid "Cancel filter"
msgstr ""
Hope this helps.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Undoing the filter works and I checked that the string gets
translated with the po files in current master.
So this is almost perfect, only we can't apply the filters
again and the link remains 'cancel' when we already did.
Sending a follow-up trying to fix this.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When entering a new patron category, required fields are not indicated
on the entry form. This patch adds the "required" class to the relevant
labels.
To test, add or edit a patron category. Confirm that the required fields
(category code, category type, description, and enrollment period) are
indicated as being required with a red label.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely.
Template changes only, but no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Printing a report like overdues in Firefox results in a printout which
cuts off in the middle. I traced the cause to something in the YUI grid
system, although I'm not sure what specific definition is the cause.
This patch adds a "screen" parameter to the @import which loads the YUI
grid CSS file. This will disable YUI grid layouts in print views. The
main disadvantage to this, as far as I can tell, is that it will
"linearize" some layouts. For instance: the patron detail page
(moremember.pl) which on screen is divided into two columns. I think
this disadvantage is outweighed by the ability to make complete prints.
To test, apply the patch and clear your cache. Try printing various
reports from Firefox. Printouts should look correct and be complete.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
CSS only change, no strings involved.
Tested with a saved SQL report 'select * from borrowers'.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The toolbar on the cataloging home page lacks the standard toolbar id,
resulting in an inconsistent appearance. This patch adds the correct id.
To test, apply the patch, clear your browser cache, and view the
cataloging home page (cataloguing/addbooks.pl). The toolbar should look
like other toolbars in Koha (for instance, members/members-home.pl).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, no string changed involved.
Works as described.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In the CCSR theme's OPAC MARC view the table of items is truncated
because the container div is styled with "overflow:hidden." I think the
complete display of information is more important than not seeing a
horizontal scrollbar, so this patch removes the style.
To test, apply the patch and clear your browser cache. View a MARC
detail page for a title which has holdings and confirm that the entire
table can be seen. Test other pages to make sure no unwanted layout
changes have resulted.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Simple CSS change, no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds a "newsfooter" class to allow CSS modification
of the date appearing as a footer on each news.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a class, checked po files to make sure change is string safe.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The CCSR theme sets a min-width of 1000px for windows which are more
than 700px wide. This caused the cart popup window to be given a
min-width of 1000px, resulting in a broken layout with unnecessary
horizontal scrolling.
This patch adds a class to the cart template and to other pop-up window
templates to ensure that a large min-width is not enforced and to give
consistent padding to those pages.
To test, set your theme to 'CCSR' and view the following pop-up pages:
- The Cart. From the cart, trigger:
- The "send" window
- The "download" window
- From a view of a List's contents trigger:
- The "send" window"
- The "download" window
Each of these pages should look correct with no horizontal scrolling.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template and CSS changes only, but no string changes.
Save for inclusion in 3.12.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, when SingleBranchMode is enabled, nobody can change the
logged in library in Koha. To change it requires disable
SingleBranchMode, switching the library, and re-enabling it. It seems
reasonable to allow superlibrarians to switch the logged in library even
if SingleBranchMode is enabled.
Test Plan:
1) Apply this patch
3) Enable SingleBranchMode
4) Log in as a superlibrarian
5) Attempt to change the logged in branch
This change should succeed
6) Log in as a non-superlibrarian account
7) Attempt to change the logged n branch
This should not be allowed, as per Koha's current behavior
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I guess this doesn't do any harm even though the practical motivations
behind it, as described in the bug, seem otherwise solvable. If
SingleBranchMode is supposed to prevent librarians from switching their
logged in library why can they choose their library when they first log
in? Was SingleBranchMode supposed to only affect the OPAC originally? Or
should the login form be modified? This seems to be a band-aid on a
poorly-implemented feature.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works as decribed. As this only adds a check for a superlibrarian
it seems safe and should not interfere with normal staff accounts.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The user should not be shown edit/delete links when clicking on a row in
additems which they cannot edit because of the IndependantBranches
setting. This patch adds a class to the row to exclude such rows in the
JavaScript onclick handler.
To test:
- Turn IndependantBranches on and edit items for a title which
has holdings from various branches including your own.
- Click a row for an item which is held by your library. You should see
the "Edit/Delete" links appear.
- Click a row for an item which is held by another library. No links
should appear.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test pass
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Changes to the templates include no string changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When the CCSR theme is enabled, selecting items in the cart and clicking
"place hold" triggers a JavaScript error and fails. This patch adds a
function missing from the CCSR version of basket.js.
To test, apply the patch and clear your browser cache.
- Enable the CCSR theme and put items into the OPAC cart.
- Open the cart, select one or more items, and click "place hold."
The cart should automatically close and the main window should redirect
to the holds screen showing your selections.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All test passed
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed patch fixes the problem described.
All tests and QA script pass, JavaScript only change.
No strings involved, save for inclusion in 3.12.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The previous patch missed removal of one template, kohaerror.tt, which
was used only by opac-userupdate.pl. This patch removes it.
To test, apply the patch and search Koha source files for references to
kohaerror. There should be none.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass. Updating the German po files
with this patch applied no new strings appeared.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The old pages for viewing and updating patron details in the OPAC have
been superceded by the new script opac-memberentry.pl. This patch
removes he old scripts and templates and corrects links to them.
This patch also removes reference to opac-userupdate.tt from
opac-patron-image.pl and replaces the authentication process with one
which uses check_cookie_auth, based on the example of opac-tags.pl.
To test, edit a patron record and set the "Gone no address" flag. Log in
to the OPAC with that account and view the patron details page. The
warning about out of date contact information should link to the new
update page.
Next, attempt to place a hold. You should see the same warning, and it
should also link to the new update page.
Test the display of patron images: Log in as a user who has an image
associated with their account and navigate to
/cgi-bin/koha/opac-patron-image.pl. Their patron image should display.
A search of Koha source files should return no results for the missing
scripts or templates.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow-up corrects the heading of the plugin pop-up window to match
the UNIMARC field it targets.
To test, trigger the plugin and confirm that the pop-up window refers to
210c.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Smple patch, fixes label. No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This plugin, for pseudo-authority-control of publisher information,
used YUI autocomplete to pull existing publisher data from the
biblioitems table. Despite its name it is not UNIMARC-specific.
It assumes publisher name data is saved in biblioitems.
This patch converts the autocomplete to jQueryUI. The search
script has been amended to return valid JSON. The template has
been modified to enable the jQueryUI autocomplete and to add
structure more consistent with other popups.
To test, link the publisher name field in your MARC structure to
the unimarc_field_210c_bis.pl plugin. Open a MARC record for
editing and click the "tag editor" link to launch the plugin.
Type the first few letters of a publisher which exists in your
database. You should get an autocomplete menu of publishers
which match your search. Select one and click the "choose"
button to fill the field in the MARC editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described. No errors.
Test: link 260b to plugin. Edit record and search first letters
of present editors. Menú appears and can select and fill value.
Why plugin 210c_bis talk about field 225a?
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Plugin now works correctly for me, even when linked
to 260$b in a MARC21 installation. All tests and QA script
pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
With the addition of opac-memberentry.pl to the OPAC we lost a way to
display the image associated with a patron's account. This patch adds
display of the patron image to opac-memberentry.pl now that
opac-userdetails.pl and opac-userupdate.pl are deprecated.
To test:
1. Log into the OPAC as a patron who has an image associated with their
account. View the "my personal details" tab and confirm that the
patron image appears with and without OPACPatronDetails enabled.
2. Log into the OPAC as a patron who has no image associated with their
account. View the "my personal details" tab and confirm that the
layout looks correct.
3. Turn off OPACpatronimages and confirm that the "my personal details"
page looks correct.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with OpacPatronDetails and OpacPatronImags turned on/off
and it's working well.
Template only changes.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
Go on the serials collection page
Check that the single pixels before and after the table have
disappeared.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pixels are removed, table functions work as before.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test plan:
Check that there is just one pagination on the pending orders page.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works and deletes the old pagination that was replaced by
datatables.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Remedied by:
- in Circulation.pm changing AnonymiseIssueHistory so that it returns ($rows, $err_history_not_deleted) instead of $rows
- consequential change to misc/cronjobs/batch_anonymise.pl to handle updated return value, and fail if there is an error
- consequential change to tools/cleanborrowers.pl although this still fails silently (raised as bug 9944)
- update of opac-privacy.pl to check return value and pass on error
- update of opac-privacy.tt to display error if appropriate
Note bug 9942 remains unfixed, which is a similar issue upon issue return.
To test:
1. OPAC
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- attempt to delete user history
- observe error
- check history - still there
- change anonymous patron to a valid user
- attempt to delete user history
- observe success message
- check history - gone
2. cleanborrowers.pl
- test it functions as before. bug 9944 has been raised for it continuing to silently fail.
3. batch_anonymise.pl
- enable privacy mode (preference OpacPrivacy)
- leave anonymous patron set to zero (preference AnonymousPatron)
- run script (I use --days -1 for testing)
- script should fail with a Carp message
- change anonymous patron to a valid user
- run script as before
- script returns quietly
- check history - gone
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add a warning in the system information tab of the about page.
Test plan:
Set OPACPrivacy = 1 and AnonymousPatron = 0 and go on the about page,
tab 'system information'. Check that the warning appears.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
http://bugs.koha-community.org/show_bug.cgi?id=6509
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
We have a message if we want to add items and we can't add, substract only.
It's ok if we choose to create items on ordering, in this case koha can't add items, just substract
and in this case we have to delete manually the items(s) in the catalog.
But if via the syspref AcqCreateItem we choose to create items when receiving this limitation is not usefull
The patch just checks if the syspref AcqCreateItem is on 'ordering'
if not the message is not shown and we can add items
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Here is the test I made for signing off :
after applying the patch
- syspref AcqCreateItem : create items on RECEIVING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on CATALOGING
- in a basket, create an order (quantity = 1)
- save the order
- reopen the order
- change the quantity (2 instead of 1)
- save the order
=> changing quantity was not possible before the patch
- syspref AcqCreateItem : create items on ORDERING
- in a basket, create an order (click on "add" to add an item => quantity = 1)
- save the order
- reopen the order
- try to change the quantity (2 instead of 1), without clicking on "add" to create a new item => you cannot (alert message)
=> the behavior is the same as before the patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Copied test plan from bug report.
Template only change deactivating the Javascript that blocks
you from changing the quantity when AcqCreateItem is set to
something else than 'ordering'.
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch does several things:
- Set the default for 008/15-17 to "no " (yes, there is space at the end)
- Link from 008/15-17 in the value builder to NORMARC country codes
- Set the default for 008/35-37 to "nor" (by setting the
DefaultLanguageField008 syspref)
- Link from 008/35-37 in the value builder to NORMARC language codes
- Fix a missing <tr> around field 35-37
To reproduce:
- Run through the Web-installer in Norwegian and choose NORMARC as
the MARC flavour
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t xxu||||| |||| 00| 0 eng d
^^^ ^^^
- Reload the page and open the value builder for 008. Problems:
- The text for 15-17 links to MARC21 country codes
- The default for 15-17 is xxu
- The text for 35-37 links to MARC21 language codes
- The default for 35-37 is eng
- If you choose e.g. "Monografier" in the top dropdown then click
on "OK" the window does not close
To test:
- Apply the patch and run through the Web-installer again, selecting
Norwegian and NORMARC
- Go to Home > Cataloging > Add MARC record and add a new record
- Click in the field for 008. The default should look like:
130415t no ||||| |||| 00| 0 nor d
^^^ ^^^
- Reload the page and open the value builder for 008.
- Check that...
- The default for 15-17 is "no " (with a space at the end)
- The link goes to NORMARC country codes
- The default for 35-37 is "nor"
- The link goes to NORMARC language codes
- Select something from the top dropdown and click "OK". Check that the
window closes and that the values that are entered into the 008 field
matches what you chose in the popup window.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Trusing Magnus is right, so testing for any regressions mainly, all good
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only changes NORMARC specific plugin and system preferences
files. Changes all seem logical to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The DB field borrowers.branchcode cannot be null (`branchcode`
varchar(10) NOT NULL default ''). However, an empty value can be selected
on creating/updating a patron.
Test plan:
- Add or edit a patron and choose the empty value for library
(branchcode).
- Save (pref BorrowerMandatoryField must not contain branchcode).
- Mysql raises an error.
- Apply the path.
- Check that you are not able to select no library.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, when importing authority records using the "Manage staged
MARC records" tool, it will show the text "Add new bibliographic records
into this framework:" followed by a drop-down menu of possible frameworks.
Since these are bibliographic frameworks and we're importing authority
records which do not use them, we have no need to show this information.
I'm proposing just a little patch to display this info only for
bibliographic records. From my tests, everything seems to work fine
without this text and the drop-down, although I've only uploaded one
MARC21 authority record at a time.
--
Test Plan:
Before applying patch...
1) Find yourself an authority record. I recommend downloading your
favourite author from: http://authorities.loc.gov/
2) Stage MARC for import. Choose "Authority" as your record type.
3) Go to "Manage staged records"
4) Underneath the button "Import this batch into the catalog", you
should see the text "Add new bibliographic records into this framework:"
followed by a drop-down of the available frameworks.
Optionally) You can also try this for bibliographic records. You'll find
the same.
After applying the patch...
5) Repeat steps 2 and 3.
6) Underneath the button "Import this batch into the catalog", you
should just see a table listing your MARC record(s).
7) Stage MARC for import. Choose "Bibliographic" as your record type.
8) Go to "Manage staged records".
9) You should find step 4 still to be true (i.e. the "Add new
bibliographic..." text should still be there).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If you create an SQL report that includes one or more parameters,
using the 'rows per page' pulldown does not work. Instead, it will
prompt for the parameters again and shows the first page of output.
Test Plan:
1) Create a new report from sql as follows:
SELECT * FROM borrowers WHERE surname LIKE <<Last Name>> AND firstname LIKE <<First Name>>
2) Run this report
3) Change the 'Rows per page' and click 'Update'
4) This should kick you back to the start where the report asks you for your parameters
5) Apply the patch
6) Repeat step 3, this time is should work correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely now. All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The subfield edit page has an edit bottom at the top of the page. Almost
no other edit screens do this. It would be more consistent to put it at
the bottom. Also missing is a "cancel" link. This patch fixes both
issues.
The patch also adds "Default" to the breadcrumbs when editing a subfield
in the default framework.
To test, apply the patch and edit a subfield: MARC frameworks -> MARC
structure -> Subfields -> Edit. The "Save changes" button should appear
at the bottom of the page alonside a "Cancel" link. Both should work
correctly.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, improves consistency and works
nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
There are a couple of English strings in tags moderation JavaScript
which are not properly enclosed in the _() function enabling
translation. As a result, clicking a translated 'Approve' or
'Reject' button in the table of tags would change the button's
neighbor's label to the English string. This patch
corrects it.
To test, apply the patch and regenerate a translation to test with. Go
to Tools -> Tags and find a list of tags to moderate (pending, approved,
or rejected). When you click on an 'Approve' or 'Reject' tag in the
table of tags, the buttons in each Approve/Reject pair should retain
their correct translated label. For instance, looking at approved tags
in French:
[ Approuvé ] [ Rejeter ]
Clicking the "Rejetee" button should change the state to:
[ Approuver ] [ Rejetée ]
Clicking "Approuver" should return the buttons to the first state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Text-change only, should require little QA and testing.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, changes look correct to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only - changes look correct to me.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Some details in the summary of basket information were not marked up
consistently with others on the page. This patch makes the markup
consistent for a consistent appearance.
To test, view a basket in Acquisitions which is part of a basketgroup.
Information should be displayed consistently for baksets in both open
and closed basket groups.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works as expected
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template change only, works nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch changes
1) structure and schema for xml files used in MARC21
006 and 008 value builders.
2) JavaScript functions used to show value builders.
Xml processing is enabled in previous patch
Any translatable string has been moved to an xml element,
those strings that no need translation remains as xml
attributes.
NOTE_1: I do not include as translatable material types
codes, because those values are restricted in schema
definition. But this restriction can be removed.
NOTE_2: Anyone with experience in XML/XSD please
check the new schema definition.
NOTE_3: Anyone with experience in the former and
JavaScript please check xmlControlfield.js
To test:
1) Apply the patch
2) Verify that 006 and 008 value builders show and work
properly
3) Update translation files for your favorite language,
a new set of strings must show up corresponding to
names and descriptions on value builders.
Note: messed up patches, sending again.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Did regression tests on the plugins for 006 and 008 and could
spot no differences in behavior of the plugins to before.
Also tested the translation process and found it working nicely.
Thank you for fixing this long standing translation bug!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When using a translated intranet, tags moderation using checkboxes and a
submit button doesn't work. You get a message "Unknown Operation on x
Term(s)" (translated of course).
This patch corrects by using name="op-[operation]" instead of name="op"
in each submit input.
Test plan :
- Create a new tag on a record
- Go to tags moderation in Tools
=> You should see your tag in pending terms
- Click on checkbox
- Click on Approve or Reject submit button at the bottom of the table
=> Without patch the tag is still pending
=> With patch operation is well performed, tag is not pending
- Test "Check lists" form
- Test Approve and Reject buttons from "Actions" column
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This Follow up patch will handle multi libraries pref
when it sets to "add" and enhance the way lists drop down menu appear
Test plan for all patches ( the first one and all follow ups ) :
1- apply the patches ( from the first one and all follow up patches)
2- use 3.10 po files and update it (for the master) "
../misc/translate/ perl translate update ar-Arab "
3- install Arabic from the updated po files
"perl translate install ar-Arab "
4- set opac opacthemes pref to ccsr
5- set OpacAddMastheadLibraryPulldown pref to add
6- select the Arabic from the opaclanguages pref
7- set opaclanguagesdisplay to allow
8- go to the opac and choose arabic
9- you will see all the directions from right to left
(as you look at koha on a mirror ;) ))
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as decribed. No errors.
With all patches applied, we get a pretty RTL interface.
Well done!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes are mostly CSS, one new image and a tiny template change.
Used po files from 3.8 for testing. Looks good!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up patch will delete the "-moz-box-sizing"
property that I was add when I'm doing some tests on
the rtl css file and I forgot to delete it
many thanks David Cook for your notes deleting that property will not effect on the results
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment on last patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch will add css file for the Opac CCSR
link this css file in the doc-head-close.inc
and add new image : arrow-left-grey-11x6.png
for the opposite direction of the right existing one.
the test plan is the same for the oldest patches
for opac prog and intranet ...
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment on last patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comment on last patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
For some reason this text inside a <td> isn't getting picked up by the
translator unless it's inside a <span>. This patch adds the span and
tidies up the text.
To test, apply the patch and "translate update" a translation. Searching
the po file for "In transit from" should return a result from detail.pl.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only change fixing a translation problem.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 5335 introduced a new "Acquisition details" block on the
subscription details page.
It is placed between to tabs and causes an ergonomic issue.
Test plan:
- Order a subscription.
- Go on the subscription detail page and select a tab.
- The "Acquisition details" block is moved from the bottom to the top of
the table.
- Apply the patch
- The "Acquisition details" block is always on the bottom of the table.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes display problem, passes all tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The patron header search form is now too wide to display correctly on
screens smaller than about 1110px. This patch groups the
previously shown-by-default choices with the hidden additional
search parameters.
To test, apply the patch and view any page which includes the patron
header search include, for example members/members-home.pl. Additional
search options should be hidden by default. Clicking "[+]" should show
all additional options: Search fields, search type, order by, library,
and category.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Works for me.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. I like this change.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[Patch submitted by David Cook]
Edmund, rather than myself, was the author of this patch,
so I'm not entirely sure about his code choices, but...it
looks like IE must process images differently than other
browsers.
It seems to me that the images are not appearing in IE,
because they're being regarded as incomplete or having
0/NULL natural width.
This patch simply introduces a try/catch hack where it
tries to add the image and remove any "no-image" elements
even nwhen the image is considered incomplete/width of
0/NULL. It won't do this if it catches any errors,
although I'm not sure that any errors would be caught
with this set up anyway...
It's certainly not the ideal solution, but it's a solution.
To Test:
Before applying the patch:
1) Use IE and FF/Chrome/other browser to view a record
with local images attached
2) Note that the local images appear in FF/Chrome/other,
but not in IE
Apply patch.
After applying the patch:
1) Repeat step 1 from above
2) Note that the local images now appear in all browsers
as they should.
--
As I mentioned before, this seems like a real suboptimal
solution. Any ideas on why IE might be considering local
images to be incomplete or having 0/NULL natural width?
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I did a regression test using Chromium and Firefox in
Ubuntu. I checked both prog and CCSR - covers displayed
nicely.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changed author of patch to reflect actual authorship.
Increase both on staff and OPAC interface
from 80 to 255 characters to be saved in
the database. Shown will be 80 characters.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Clean patch, workes as described.
To test:
- Apply patch and run database update
- Check that the column in the database is now varchar(255)
- Enter a new suggestion in the OPAC
- Edit this suggestion in staff
- Confirm form has the new max value set
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
fixed a typo in marc 21 leader builder about the value 'b', Serial component part
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch.
Template change only.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Confirmation message for deleting subfields from an authority framework
has wrong capitalization.
To reproduce:
1) Go to Administration > Authority types
2) Click on MARC structure for one of the authority types
3) Click on the subfields link for one of the fields
4) Delete one of the subfields
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the lost and damaged status for an issued item to the
table of issued items on circulation.pl to make it align more closely to
the same table on moremember.pl
Test Plan:
1) Apply patch
2) Issue an item
3) Set the item's damaged status
4) Verify the status is showing near the date due on circulation.pl
5) Clear the damaged status and set the lost status again
6) Repeat step 4
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I could only test this with the DAMAGED value, because
currently lost items are removed from the patron account
when you set the status.
I know there is a patch somewhere
to make it optional and the change looks alright.
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
A user might create a SQL report that relies on non-existent authorised value categories.
Because of a typo, or just because they copy&pasted the report from the Wiki.
Use cases are:
- The user creates a report from SQL
a) Uses bad authorised values
b) Clicks 'Save Report'
c) Koha lists the problematic authorised values
d) The user decides to
e-1) Save it anyway, it gets saved
e-2) Edit the report, it gets back to where it chose 'Save Report'
- The user edits an already saved report (Update SQL)
a) Uses bad authorised values
b) Clicks 'Update SQL'
c) Koha lists the problematic authorised values
d) The user decides to
e-1) Save it anyway, it gets saved
e-2) Edit the report, it gets back to where it chose 'Update SQL'
- The user tries to run a saved report that contains bad authorised values, Koha advertises the problem and provides the user with a button 'Edit SQL' to fix things.
To test, just create a report from SQL using invalid authorised values like this (misspelled 'branch'):
SELECT *
FROM itemtypes
WHERE hola=<<Test branch1|branchee>> AND
hola2=<<Test branch2|brancha>>
Regards
To+
Notes:
- I added several comments on the code.
- Fixed an annoying warning of uninitialised variable also (refactored some tiny bits to do it).
- Added the following methods
- C4::Reports::Guided::GetReservedAuthorisedValues
- C4::Reports::Guided::GetParametersFromSQL
- C4::Reports::Guided::IsAuthorisedValueValid
- C4::Reports::Guided::ValidateSQLParameters
- C4::Koha::IsAuthorisedValueCategory
- Those methods could have been used to refactor this guided reports code as its *a bit messy*. I chose to do it in a new bug of course :-D.
- Fixed some trivial perlcritic -5 errors
- Removed some debugging stuff left by mistake
- Fixed some POD problems
- Optimal SQL-driven IsAuthorisedValueCategory method
- Thanks to Owen and Jared for their patience heh.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No koha-qa errors.
Test:
Tried with examples (from help and test plan) reports, correctly
identifies invalid authorized values, and no problem with
authorized ones.
NOTE: Online help for this does not states that partial values
need to be between '%' in a SQLish way. Perhaps this could be
addressed inserting % in values or adding a checkbox (partial|exact).
Or changing help.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This bug is present in master and (at least 3.8.x, where we spotted it).
The patch makes adding items, to a list from the results page, not rely
only on opacbookbag syspref but also 'virtualshelves'.
Regards
To+
PS: Thanks Graciela Galli for reporting.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only patch, works nicely.
Test plan copied from bug report:
- Disable the opacbookbag syspref
- Login in the OPAC
- Create a list (I tested a private one)
- Search in your db for some biblios.
- Choose some and add them to the created list
- Go to your users's page, to the my lists tab
- Your list is empty.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The logic of the JavaScript for showing and hiding additional options in
the orders search form wasn't quite right, resulting in the +/- control
being hidden incorrectly.
This patch corrects and simplifies the JS in order to fix the problem.
To test:
- Open any page in Acquisitions which shows the orders search
form in the header search bar (for instance, Acquisitions home).
- Open the orders search tab and click on the "+" to show more
options.
- Click the "-" to hide the additional options. The additional options
should now be hidden and the "+" displayed.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works as expected
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Labels are budget, but should be fund.
To test:
1) Check the table on the suggestions page.
2) Check the suggestion edit form.
3) Check the suggestion display.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
A misplaced closing </li> causes the "reopen" checkbox to be misplaced
if you're editing the a closed invoice. This patch puts the </li> in its
proper place.
To test, view a closed invoice (Acquisitions -> Vendor -> Invoices) and
confirm that the "reopen" checkbox is correctly placed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Problem easy to spot, patch fixes it perfectly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
branch > library
budget > fund
bookseller, supplier > vendor
and capitalization
To test:
1) Go to Reports > Acquisitions statistics
2) Check the labels and options of the form for correctness.
3) Run a few test searches to make sure functionality is
unchanged.
Unfortunately, some strings are from the .pl file, so a follow
up moving those to the templates is needed.
To make the changes consistent I have changed them in the .pl file.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The budget planning table previously used a YUI menu as part of a
system for hiding and showing table columns. Instead of trying
to convert that sytem to Bootstrap I have used code from the
batch modification/deletion pages which uses a list of checkboxes
to show and hide table columns. This has the advantage of giving
the user visual feedback of what columns are hidden and of offering the
user an interface which is familiar from other pages.
This patch also moves CSS from a batch-operations-specific
CSS file into the main CSS file. Batch modification templates have been
modified accordingly.
To test, view the budget planning page and choose different
"plan by" options (by month, by library, by item type). Test
the show/hide action on each individual column and using the
"show all" and "hide all" checkboxes.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
This interface is also much more visually appealing, user-friendly, and informative than it was when it used the YUI menu.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Overdue Fines Cap ($) > Overdue fines cap (amount)
To test:
Go to administration > circulation and fine rules
Check column label Overdue fines cap now follows capitalization rules
and has no dollar sign.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the manual link in the lists help file.
To test:
Visit lists pages in the staff client, view the help and confirm link goes
to the right place.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the manual link on the holds help file.
To test:
Visit the holds tab on any bib record and click the Help link. Make sure it
goes to the right place.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a help file to the listing of titles that use a tag in the
tag moderation tool.
To test:
* Visit the Tag Moderation Tool
* Click on a accepted tag
* Check that the help file loads on the list and that the text and
links are right.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the text and links for the Tag and Comment
moderation tools.
To test:
Visit the help on the tags and comments tools and confirm that text and
links are right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the help files in the catalogue folder.
To test:
Visit the help on the search, detail pages, item details and
item history pages and confirm text and links are right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the manual links and some text in the acq
help files.
To test:
Visit help on all acq pages and make sure links and text are right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the links to the manual and the text of the
admin help files.
To test:
Visit the help files on all admin pages and make sure the links and text
are right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates all the help files in the members folder. It also
adds a missing help file for approving patron account changes.
To Test:
Visit the help on every patron page and make sure the text and
manual links are all right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed 2 obvious typos mentioned on the bug report.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the links to the manual in the patron card
creator help files. There were no other changes.
To test:
Visit help on the patron card creator tool and make sure the links are right.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the manual links in the label creator
help files. There were not other string changes.
To test:
Visit the help on the label creator and make sure that the
links go to the 3.12 manual.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updating links.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch just updates the links to the manual in the
Authority help files.
To Test:
Visit the help on all authority pages and click the manual link
in the help pop up. It should go to the 3.12 manual.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updating links to new version.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the help files which do not have a module
folder.
To test:
Visit About Koha, Koha Home, and the No Help Found pages and
check links to the manual.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updating links to new version.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
While the tablesorter plugin has not been completely eliminated from the
staff client yet, there are no more instances where it requires the
include file for showing paging controls. table-pager.inc can be safely
removed.
To test, apply the patch and confirm that the file is gone. A search of
Koha templates for references to table-pager.inc should return no
results.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When the patron detail page switched to DataTables no accommodation was
made for metric date formats in sorting.
This patch adds sorting based on data in a span's title attribute, and
thus requires that the patch for Bug 9887 be applied.
To test, view the detail page for a patron who has assorted checkouts,
relatives' checkouts, and holds. Sorting of date columns should be
correct with the dateformat preference set to any value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Nice improvement.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch changes N<little circle> to No. in three templates.
To test:
1) Search for a vendor with visible baskets.
Check that the first column of the basket table in the
is now labelled No.
2) Print a PDF order in acquisitons with layout2pages.
3) Print a PDF oder in acquisitons with layout3pages.
Check both generated PDFs for the correct syntax.
Note: you need to switch the system preference
OrderPdfFormat in order to test 2) and 3).
The 2 possible settings are:
pdfformat::layout3pages
pdfformat::layout2pages
It's not only Koha - git bz doesn't like the degree
notation either.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I prefer "No." over "#" and my survey of the templates shows that "No."
appears more often. Looks like something to add to our style guide.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch changes N<little circle> to # in three templates.
To test:
1) Search for a vendor with visible baskets.
Check that the first column of the basket table in the
is now labelled #
2) Print a PDF order in acquisitons with layout2pages.
3) Print a PDF oder in acquisitons with layout3pages.
Check both generated PDFs for the correct syntax.
Note: you need to switch the system preference
OrderPdfFormat in order to test 2) and 3).
The 2 possible settings are:
pdfformat::layout3pages
pdfformat::layout2pages
It's not only Koha - git bz doesn't like the degree
notation either.
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This little patch adds a few values and descriptions to complete
value builder for marc21 008.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Follow-up works as described.
XML change only.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch, together with 9357, fix plugins for leader, 006, 007 and 008 MARC21 fields
Leader18 c and i is fixed on Bug 9357
Added missing/renamed fields on 007
Options 'o' and 'q' already present on 006 and 008,
fixing spaces and removing unnecessary descriptions.
To test:
1) Catalog/edit a record
2) On 007 value builder, check missing values
on 008, BKS, check for example 33- Literary form,
i- Letters has a description
3) Apply the patch
4) Clean your browser cache
5) On 007 value builder, new values are present
On 008/6 descriptions are absent
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It turns out that this was not a missing but a broken feature.
This patch corrects the template variables to make enumchron
show up on the item table for item level holds in the OPAC.
To test:
Try to place item level holds on
1) a record where at least one item
2) a record where none of the items
has items.enumchron information.
The column with enumchron should only show for 1), but not
for 2).
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
JS is a requirement for the staff client, so the sort link on header is
useless.
Test plan:
Check that there is no regression (sort, data, etc.) on the hold ratios
table.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested on top of patch for bug 9459.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch is an alternate solution to the problem of "0" not appearing
on the comment tab in translated templates. It uses the Template Toolkit
option of specifying a default value for a variable:
[% reviews.size || 0 %]
This syntax is already in use elsewhere in the template.
Same test plan:
1) Make sure comments/reviews are activated
2) Find a record with 0 comments/reviews in the opac
3) The tab shows: Comments ( 0 )
4) Switch to any other languages.
5) Tab now shows: <translation of Comments> ( )
6) Apply patch
7) Check English templates stil work correctly
8) Rerun 'perl translate install <langcode>
9) Check display is now correct.
10) Also check that number shows correctly for records
with comments.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Tested with nb-NO. English still works after the patch. Norwegian
was showing "Comments" untranslated, which had me a bit unnerved.
Turns out the string to be translated changed from "Comments ( %s%s%s%s )"
to "Comments ( %s )", so to make sure all was well, I had to update
the nb-NO translation, fix the number of %s's in the Norwegian string,
make sure it was not marked as fuzzy and then install nb-NO. And it
works!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Re-added the xsl that shouldn't have been removed.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different settings for OpacItemLocation
and not for loan set in the item and for the item type.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The structure of the invoice edit form does not match that of similar
forms in the staff client. This patch alters it to be consistent.
To test you must also have the patch for Bug 10046 applied.
Go to Acquisitions -> Invoices and search for invoices. Click an invoice
to view/edit details. The form displaying fields for shipment date,
billing date, etc. should look correct and work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In some XSLT, "items" namespace is used in exclude-result-prefixes but is not defined.
This patch add this namespace where missing.
Also corrects a koha.org, instead of koha-community.org, in one namespace URL.
Test plan :
- Enable XSLT on search results
- Perform a search
=> Look at error logs to check that there is no xsl error like :
[Fri Feb 08 15:35:06 2013] [error] [client 127.0.0.1] [Fri Feb 8 15:35:06 2013] opac-search.pl: compilation error: file koha-tmpl/opac-tmpl/prog/en/xslt/UNIMARCslimUtils.xsl line 8 element stylesheet, referer: http://opac.master.community.localhost/cgi-bin/koha/opac-detail.pl?biblionumber=299
[Fri Feb 08 15:35:06 2013] [error] [client 127.0.0.1] [Fri Feb 8 15:35:06 2013] opac-search.pl: xsl:exclude-result-prefixes : undefined namespace items, referer: http://opac.master.community.localhost/cgi-bin/koha/opac-detail.pl?biblionumber=299
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Passed-QA-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With comment on Bugzilla.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Changes are:
budget > where actually fund is meant
branch > library
bookseller, supplier > vendor
To test:
1) Receive a shipment, check the little form where you
enter your invoice number for correct use of terms.
2) Receive some orders and save finish receiving.
3) Search for your created invoice. Check filters and
results table for correct use of terms.
4) Look at the details of your invoice, repeat check there.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The fix for Bug 9397 moved the "cannot check in" heading from within the
one conditional where it should have been displayed to the top of all
check-in errors/messages. "Cannot check in" is still only valid if the
item is withdrawn and BlockReturnOfWithdrawnItems is ON.
In order to accomplish the goal of Bug 9397 while fixing Bug 9860 this
patch puts "cannot check in" back into the correct conditional and adds
a generic heading to check in messages for accessibility purposes.
To test, check in items which will trigger a variety of errors
including:
- item must be returned to home library
- item is lost
- item is withdrawn (wtih BlockReturnOfWithdrawnItems on and off)
- item is overdue
...as well as items which should check in normally. Messages should
display correctly.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the extra i in "sliip."
To test, go to Tools -> Notices & Slips and view the help file. The last
bulleted item on the page should contain no typo.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Can't resist to sign Bug 10000!!
Work as described. No errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Can't resist to QA - All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Several JS alert messages contain "\n" which is problematic for
translation. This patch removes those instances (a line break is not
strictly necessary anyway). Also corrected: two instances of "holds(s)"
To test, place a hold on a title with items. From the biblio detail page
choose Edit -> Delete all items and Edit -> Delete record. In each case
you should see error messages with no line breaks and no misspellings.
Delete all items attached to the record with holds from the item edit
page. Go back to the detail page and choose Edit -> Delete record. You
should see an error message about existing hold(s) with no line breaks
or misspellings.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Harmless change, fixes misspellings and makes translations easier
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The searials search results "Opened" tab should be labeled "Open." This
patch makes this correction and changes the wording in another place
which used "opened." Markup has also been added to maintain consistency
in display of messages.
To test, perform a search for a subscription. If your search returns
results you should see an "Open" and a "Closed" tab. To test other
affected changes perform searches which return no results, only open
subscriptions, or only closed subscriptions. "No results" messages
should display correctly and consistently.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
String fix. The field name is also incorrect, causing the alternate
contact country to not be stored.
To test: Submit an update to an existing patron record an include a
change to the alternate contact's country field. Before the patch this
line would not appear in the staff client for approval. After the patch
it should.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Reminder: Even small patches require test plans. I have added one which
I think covers the changes in the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The current problem:
When the verify_images() function runs from amazonimages.js, it loops
through every img element and selects the elements that come from Amazon
sources.
However, if the height/width is 1 (i.e. Amazon passes off a blank image)
or if the img element's complete property is null or non-existent, then
it searches for the parent node and re-writes the HTML with the "No
Cover Image Available" (NO_AMAZON_IMAGE) text, even though that parent
node might contain other img elements that have images available (from
Google, local images, etc)!
Proposed fix:
Wrap the Amazon image in a span tag (as we do with the Google and local
covers), so that it re-writes the HTML within that parent span, rather
than the parent anchor which contains all the other images.
To test:
1) Turn on the OPACAmazonCoverImages, GoogleJackets, and
OPACLocalCoverImages system preferences
2) Replace the ISBN in one of your records with 9780615352435
3) Now load a local cover image for that record
4) Search for that record (but make sure you're vague enough to have
multiple search results)
5) For a split second, you may notice the local cover image appears before being replaced by a "No Cover Image Available".
Now apply this patch
6) Refresh your search results page
7) You should now see your local cover image, PLUS the "No Cover Image
Available" for the Amazon image, and whatever other graphics/"no
cover image available" "graphics" for the Google Jackets.
To be comprehensive, try the same set of steps using the OPAC Lists
rather than the OPAC Search Results
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Liz's patch adds the 'flagged' value back, but there's a problem with its logic that prevents it to work on startup (works fine for changing values)
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Even though we don't know what they mean or do.
To test:
- open the docs to have at hand the list of codes/visibility options combinations and
try changing several subfields from a single tagfield. Save, and reopen the "Edit subfields" page.
- Click the "Flagged" checkbox - it should disable the other checkboxes as this setting is (apparently) exclusive to the others.
- Step through several tabs and set your visibilities as you like.
- I had a MySQL shell opened to repeatedly run this query (i tested against field 886
on the default framework):
> SELECT tagfield,tagsubfield,hidden FROM marc_subfield_structure WHERE frameworkcode='' AND tagfield=886;
- Compare what was saved on the DB with the docs for that visibility selection.
Bug 9894 - Help file updates
To test:
Click the Help link in the upper right hand corner of the MARC subfield editor
Verify that the epic list of values is gone
Verify that the help page overall looks alright
Verify that the help makes sense and is understandable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch aims to provide a non-intrusive way (with respect to Koha's code, so
it could have got into 3.12) for the users to easily choose the visibility settings
for each subfield.
This patch is also known to have arrived late for 3.12. I've been struggling with
other stuff at work, but I just wanted to put this somewhere just in case it can
be reused or something else.
The patch adds two JavaScript functions that deal with (de)serialization of the 'hidden'
value for subfields. One each way. Listeners are added to the checkboxes so the (actually, heh)
'hidden' value gets correctly updated on each checkbox change.
There's a costly function to update all checkboxes on every tab to match the 'hidden' value on page load.
To test:
- open the docs to have at hand the list of codes/visibility options combinations and
try changing several subfields from a single tagfield. Save, and reopen the "Edit subfields" page.
- I had a MySQL shell opened to repeatedly run this query (i tested against field 886
on the default framework):
> SELECT tagfield,tagsubfield,hidden FROM marc_subfield_structure WHERE frameworkcode='' AND tagfield=886;
- Compare what was saved on the DB with the docs for that visibility selection.
Regards
To+
PS: I promise I'll work on the proper patch for 3.14, which would involve DB structure changes and
(more than I expected) rewriten code.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I promise to hug you the next time we meet. This works, and is a reasonable work around for a very longstanding awkward interface.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the TinyMCE library from its language-specific
location and puts it in intranet-tmpl/lib. The most recent version
of TinyMCE is used, and the files added have been limited to
those required for proper functionality of the editor.
Files omitted: documentation, examples, unused plugins.
To test, visit each page which uses the TinyMCE editor: News
editing (tools/koha-news.pl), library editing (admin/branches.pl),
and online help editing (help/edithelp.pl). The editor should
look and function as before.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
(cherry picked from commit 81714f8141de147a9133944057b059df47160315
on github.com/KohaAloha/Koha-Dev:bug_9172)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected authorship and date
Replace the tablesorter plugin with the DataTables plugin on the
patron sent notices page.
This patch adds default sorting by time (descending).
This patch depends on the one for Bug 9887, which introduces a new
DataTables plugin to allow sorting on data embedded in a <span>'s
"title" attribute. This allows sorting to be done on an unformatted
datetime.
To test, open the sent notices page for a patron who has multiple sent
notices. Confirm that table sorting works correctly with various date
format settings.
Revision corrects an error which occurs when there are no notices:
Instead of displaying an empty table with a message the table is not
displayed and a standard dialog message is displayed. In order to
prevent page-specific CSS and JS from conflicting with the standard
"message" class the page-specific classes have been changed from
"message*" to "notice*" Test this change by viewing a page with existing
notices and clicking the titles to show/hide the notice contents.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The calendar management page uses the old tablesorter plugin. This patch
replaces tablesorter code with DataTables.
In order to easily sort date columns under various dateformat system
preference settings, date columns now sort based on an unformatted date
in a <span>'s title attribute (requiring the patch for Bug 9887).
To test, view the calendar page--preferably with plenty of existing
holiday data to populate the holiday summary tables. Confirm that
sorting works correctly on all sorted tables with the dateformat
preference set in all settings.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This has to be tested together with the patch for bug 9887.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The circulation page, when the UseTablesortForCirc preference is
enabled, uses the old tablesorter plugin. It should use DataTables
instead.
This patch removes references to the tablesorter plugin and makes these
changes to enable use of DataTables:
- Pass two new unformatted date variables to the template from
circulation.pl so that sorting can be performed on this data.
- Add DataTables configurations for the table of checkouts and the
table of relatives' checkouts.
- Add a new plugin to the main DataTables configuration script to allow
sorting on data embedded in a <span>'s 'title' attribute.
- Add <span>s to each table with a title attribute containing the
unformatted date data which DataTables needs to perform correct
sorting. This eliminates the need for a special sorting algorithm to
accomodate various date and datetime formatting options.
- Set a template variable for checking whether circ exports are enabled.
This reduces repetition. DataTables configuration changes based on how
many columns are present.
To test, load the circulation page for patrons who match various
conditions:
- Having only checkouts from today
- Having checkouts from today and previous days
- Having checkouts only from previous days
- Having relatives who have checkouts (from today, from previous days,
from both)
Test these situations with UseTablesortForCirc enabled and disabled.
Test these situations with circ exports enabled or disabled (with
ExportRemoveFields filled or empty, for instance).
Sorting should work correctly on all columns with the dateformat
preference set to any option.
All other circulation functions should work normally.
Revision adds missing include for table footer when there are previous
checkouts and removes from empty table header cells which were
messing up auto-detection of numeric data. The global CSS for table
borders has been tightened up to improve handling of alternating row
colors in DataTables-sorted tables.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Note: Don't forget it's the checkout tab and to turn on the
preference to allow sorting there.
Also, while checkouts sorts dates correctly, sorting on the
details tabs was not always correct in my tests.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
1. Log in to the staff client. Note your logged in library.
2. Navigate to Circulation -> Holds queue.
3. Select a holds queue report for a library other than your own.
4. From the holds queue report page, click the "Check out" tab and
enter the card number of a patron who has holds.
5. On the circulation page for that patron, click the "Holds" tab.
6. Click one of the titles in the list of holds.
Your logged in branch will now match the library you chose for the
holds queue report.
Alternate sequence:
4. From the holds queue report page, click the "Check out" tab and
do a non-exact search (search which will return more than one result)
for a patron who has holds.
5. Choose the correct patron from the list of results.
Your logged in branch will now match the library you chose for
the holds queue report.
Apply the patch and repeat, this time it should not change your logged
in branch
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Weird bug, the patch works for me.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch. All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test
1/ Select a branch in circ rules
2/ Edit or add a rule, note this change is made for default instead of
the library you selected
3/ Apply the patch
4/ Try 1 and 2 again
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Works as expected.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replace the tablesorter plugin with the DataTables plugin on the
hold ratios report page.
To test, open the hold ratios report (Circulation -> Hold ratios).
Confirm that table sorting works correctly.
Revision adds correct pagination options and natural sort for 'items
needed' column.
Patch now depends on Bug 9431
(http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=9431) which
introduces the natural sort plugin.
Further revision corrects template path to datatables assets.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: On top of Bug 9431. Sorting works. No errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch is a follow up to the one that adds the plugin help.
To test:
Visit the upload a plugin page and review the help and links.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fixed capitalization issues.
Update the text and links in the Tools help files.
To test:
Check the text and links on all help files under Tools.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I fixed one instance of a link to 3.10 instead of 3.12.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This adds a help file to the new plugins module.
To test:
Activate the plugin module and check the text and links in the help file
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the text and links for the Circulation Help Files. It also removes
an unused help file 'billing.tt'.
To test:
Visit the help files on all circ pages and confirm links and text are right.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the text and links in the offline circulation tool help files.
To test:
Visit all offline circulation pages in the staff client and review the text and links.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the text and link on the suggestions help file.
To test:
Visit the manage suggestions page and review the help file.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Update text and links for Serials help files.
To test:
Visit all serial related pages and check the text of the help and
test the links.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates the reports help for Koha 3.12.
To test:
Visit all reports pages and review the help for textual changes
and correct links.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This updates just the links in the cataloging help, no text changes where made.
To test:
Visit help in cataloging and click the manual links and make sure they're right.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In this Patch I added some changes to the rtl.css file
I made some changes in the file opac-bottom.inc and add css
classes to the lang list and I define the class value in
the opac.css
I add If statment to the opac-detail.tt to chose the rtl.css
when rtl lang.
http://bugs.koha-community.org/show_bug.cgi?id=8061
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reformatted commit message and added bug number.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with po files for Arabic from 3.8.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
I think this patch is good for th rtl langs.
and based on what D.Ruth send before, I added some edits
as a right to left reader.
Tested on master with Arabic
I used the updated po files for v. 3.8 (because the 3.12 )
need some revision ...
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch repairs a few things in templates and CSS to allow
for the injection of right-to-left CSS, also in this patch.
It should apply to 3.8 and master.
To test, install and enable a right-to-left language for the
OPAC, currently Hebrew or Arabic.
The Arabic OPAC translations for 3.6 are mostly-complete, so
they are a good test case.
It's helpful to have a reader of the language handy, but the
layout should be easy enough to figure out, even for
non-readers.
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amended patch adding back author and adding sign off.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch tweaks a few templates, and enables right-to-left
flipping via CSS in the staff client.
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amended patch, putting back author and adding sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
It is noted in Bug 5432 that during a duplicate operation one field,
'Sort1' does not automatically clear when the cursor moves into it. This
patch corrects this.
Edit a patron record to have data in the Sort1 and Sort2 fields. Perform
a duplicate operation on this patron and confirm that the Sort1 and
Sort2 fields show the information from the original patron record. When
you click on each field the contents should disappear.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replicate:
Load the OPAC
You should see "Browse by Subject or Author right below the search box
To test:
Apply patch
Load the OPAC
You should see "Authority search" where "Browse by Subject or Author" was .
Signed-off-by: Mason James <mtj@kohaaloha.com>
Amended patch: change strings in opac-authorities-home.tt
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If there is no data, we don't display the table.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replace the tablesorter plugin with the DataTables plugin on the funds
administration page.
To test, open the funds administration page (Administration ->
Funds). Confirm that table sorting, paging, and searching works
correctly.
Note that the table is sorted only when hierarchical display of parent
and child funds is not enabled. When the hierarchicial display is
enabled the table sorter is not triggered.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Post-QA revision adds handling for empty table: "No funds" row must have
same number of cells as the rest of the table (including hidden cell);
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The datepicker on the OPAC patron entry/update form
(opac-memberentry.pl) doesn't show a calendar icon. This is because
although there is in-page JS to trigger the widget, the page doesn't
include the file which sets some widget defaults, including the path to
the calendar icon and the translatable strings for calendar labels.
This patch simply adds calendar.inc to the template.
To test, load the patron entry/update form (click "personal details" for
an existing patron or a start new patron registration). The date of
birth entry field should show a calendar icon.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Test plan works as described. Looks much better.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Labels which precede a text input or select typically have a colon
before them:
Name: [____]
This patch cleans up templates where labels in this context lack a
colon. Exceptions to this rule include radio buttons, checkboxes, and
labels inside tables.
To test, view the affected pages and confirm that labels look
consistent.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch adds more consistency.
Work for translators could be made easier using CSS instead
of whitespace after colon.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In serial receiving :
When creating an item for an issue, a javascript prefilles the $h subfield with issue number.
This is for MARC21, in UNIMARC serial number is on $v.
This patch replaces hard-coded value with the subfield mapped with "items.enumchron".
Test plan :
- Set "Koha to MARC mapping" of "items.enumchron" on a subfield other than $h, ie $z
- Go to a serial subscription detail with "Serial receipt creates an item record"
- Click on "Receive"
- On an issue, click on "Click to add item"
=> Check that issue number is copied into selected subfield, ie $z
You may test that with no mapping of "items.enumchron" there is no javascript error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice catch! Works as advertised.
All tests pass after fixing tabulation characters in serials-edit.tt.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the jQuery plugin previously used to display the
library information tooltip on opac-detail.pl and implements the
functionality using jQueryUI's tooltip widget. jQueryUI has been
upgraded to 1.9.2 in the process, which required some ammendments to
jQueryUI-related CSS.
To test, make sure at least one of your libraries has "OPAC info" stored
as part of its configuration. View a record in the OPAC which is owned
by that library. Hover over the library's name in the holdings table and
you should see a properly-positioned tooltip showing the "OPAC info."
Also test other jQueryUI-related functionality to confirm that the
upgrade didn't break anything: Tabs and datepickers should still work
correctly.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely in prog theme, feature seems not to be available
for ccsr yet.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a style for textareas on the Edit Item screen of addbiblio.pl so that they are roughly the same length as the other input elements around it on the page.
To test:
Before applying patch...
1) Create a new item for any biblio with a URL (subfield u) of over 100 characters (you can use www.lettercount.com to count the number of characters in your URL).
2) In any browser (I've already looked at IE, Firefox, and Chrome on Windows), edit the item (either by clicking "Edit Items" from the Normal view of the bib record then clicking "Edit" next to the applicable item, or clicking on the "Items" view in the bib record and clicking "Edit item" next to the relevant item).
3) Notice that the textarea for the url is absolutely tiny. Difficult to read and difficult to interact with.
Apply patch.
1) Notice that the textarea is roughly the same size as the other input elements on the page.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The html code of 0 (0) is necessary for this
tab to be correctly translated.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes display in translated templates.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
5 tables (with datatables) are displayed with a pixel before and after.
List is:
- acqui/acqui-home.tt
- acqui/booksellers.tt
- acqui/neworderbiblio.tt
- acqui/supplier.tt
- members/statistics.tt
Test plan:
Check on the 5 pages that pixels are disappears after applying this
patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
members/statistics.tt was already fixed on master.
JavaScript change only, works nicely.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When editing an existing CSV profile, its encoding is not selected in combobox, first value "ascii" is always selected.
This patch corrects this (surely appeared with TT conversion) and also the fact that "uft8" is by default selected in creation form.
Test plan:
- Go to Tools/CSV Profiles
- In "New prodile" tab
=> Check that "uft8" is selected
- Create a new profile by entering name, an encoding (other than the first), and MARC fields
- Click on "Edit existing profile" tab
- Select created profile
=> Check that specified encoding is selected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only change.
Fixed tabs.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The routing list tab displays on patron pages even if the RoutingSerials
preference is OFF. Display of the tab should be conditional on that pref
being turned on.
This patch adds a check for the RoutingSerials preference to the menu
include files and amends the affected scripts to make the variable
available on the pages where those includes are used.
To test, view the following pages with RoutingSerials both on and off.
The routing list tab should be shown and hidden accordingly:
- Circulation
- Patron details
- Patron fines
- Pay fines
- Pay amount/selected (click from the Pay fines page)
- Create manual invoice
- Create manual credit
- Patron circulation history
- Patron modification log
- Patron notices
- Patron routing lists
- Patron statistics
- Patron files
- Patron permissions
- Set patron password
- "Can't delete patron" page (try to delete a patron with checkouts).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Touches a lot of files, but only a tiny change in each, works well.
Could perhaps be set in C4/Auth instead, but that's no reason not to
sign off
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Replace the tablesorter plugin with the DataTables plugin on the
MARC frameworks administration page.
To test, open the MARC frameworks dministration page (Administration ->
MARC bibliographic framework -> MARC structure). Confirm that table
sorting, paging, and searching works correctly.
Revision corrects path to DataTables assets, merges with new
Bootstrap version of the page, and corrects minor markup errors.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to let the KohaDates plugin display a datetime, this patch
modify this plugin.
Now it uses Koha::DateUtils instead of C4::Dates.
Test plan:
- check that the date format on the member notices page
(members/notices.pl) is displayed according your syspref dateformat.
- check that existing dates are always in the good format (without the
hours) e.g. acqui/histsearch.pl, acqui/basket.pl, etc.
- Modify your syspref and recheck the previous pages
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice addition, and works according to the test plan. A nice
follow-up would be to create a system pref for formatting times
(12/24hr).
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a tab in notices.tt to make QA script happy.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
