Script overdue_notices.pl creates a printed letter if borrower as no email.
Actually, unless --email option is used, first valid email of borrower is used. Email field should depend on AutoEmailPrimaryAddress syspref like in other letter creations.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Following test plan from Julien Sicot from Bugzilla:
- with patron's email address specified on "primary email"
field AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
field AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email"
field AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress" on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
- with patron's email address specified on "primary email" field
AND syspref "AutoEmailPrimaryAddress" on "home"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email" field
AND syspref "AutoEmailPrimaryAddress" on "work"
=> notice sent to patron | OK
- with patron's email address specified on "alternate email" field
AND syspref "AutoEmailPrimaryAddress" on "alternate"
=> notice sent to patron | OK
- with patron's email address specified on "secondary email"
OR "alternate email" field AND syspref "AutoEmailPrimaryAddress"
on "home"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" field AND syspref "AutoEmailPrimaryAddress"
on "alternate"
=> no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email"
OR "secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK"secondary email" field AND syspref "AutoEmailPrimaryAddress" on "alternate" => no notice sent to patron, overdue notice sent to koha admin | OK
- with patron's email address specified on "primary email" OR
"secondary email" OR "alternate email" field and syspref
"AutoEmailPrimaryAddress" on "first valid" => notice sent to patron | OK
Note: Options for AutoEmailPrimaryAddress should be like the field names on
the patron form (primary, secondary...), but this is outside the scope of this
patch.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The -log option become optional if the -output_dir is given.
Test plan:
call the script with
1/ no one parameter : no log file
2/ -l : log file will be created in /tmp
3/ -o=/home/koha/var/log : log file with be created in the specified
4/ -o=/home/koha/var/log -l: Same as 3/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: All combination of options tested. Works well. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
1/ Before the patch run misc/cronjobs/fines.pl
Notice that a file has been written to /tmp
2/ rm the file
3/ Apply the patch and run the script again
Notice the file is not created
4/ run the script with -l
Notice the file is created again
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Now it work as described. No errors.
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To Test:
Set up a borrower to receive due and/or predue notices.
Define your predue and/or due notice to use <<items.content>>
Give your borrower an issue that will trigger a notice to be sent
(Example: Henry Acevedo has checked out a book that will be coming due tomorrow,
he wants to receive predue notices 1 day in advance)
On the command line, run (your paths may vary, these are mine):
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n
Note that the date listed is the due date, not the issue date.
Then run:
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl -c -n --itemscontent=issuedate,title,author,barcode
Note that the date listed is the issue date, not the date due.
Also run
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --help
Should show the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl --man
Should show the man page version of the help.
sudo env KOHA_CONF=/etc/koha/sites/devlibrary/koha-conf.xml PERL5LIB=/usr/share/koha/lib perl advance_notices.pl
Should show the help. This script requires confirmation before running (-c or nothing is done).
Note that the documentation refers to the --itemscontent= option and now allows --man as well as --help. Also it is a proper POD.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works as advertised according to the fine test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the -email option to overdue_notices.pl, which is repeatable
-email value can be:
- 'email'
- 'emailpro' or
- 'B_email'
- perltidy done
- in production for a BibLibre customer
- validated by the customer
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 40f9914e60.
Per Colin's report (confirmed by Mathieu and Julian):
"I've had some problems with this patch. With it applied I found
overdues for multiple users getting the same user's overdue message
text, eg user 1 gets their correct message but users 2, 3 and 4
get it as well. reverting the patch corrected this. I've not tracked
down the cause as yet."
fixes 2 warnings...
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 659.
Use of uninitialized value in pattern match (m//) at /usr/share/koha/bin/cronjobs/overdue_notices.pl line 670.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes the script read those parameters from the corresponding
$KOHA_CONF file.
Regards
To+
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Output of of the overdues script with -csv now contains country
from the first address in the patron account.
I checked output for 2 patrons, one with and one without country
in the patron's address.
All tests pass. Perlcritic fails before and after:
"require" statement with library name as string at line 29, column 12.
Use a bareword instead. (Severity: 5)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed minor conflict in C4/Installer/PerlDependencies.pm
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fix a typo that prevented report to be run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The script misc/cronjobs/smsoverdues.pl requires HTML::Template::Pro and
uses templates that do not exist in Koha. Since this has been true for
at least a year and a half, and no one is aware of anyone who is using
it, it seems prudent to remove the script so that no one is confused
and/or distressed by its non-functioning nature.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
[This patch was split out from tcohen's excellent patches for bug 8519
--jcamins]
It removes the obsolete zebraqueue_daemon.pl and koha-zebraqueue-ctl.sh
obsolete scripts too.
Several files are modified to address te removal/addition of these files.
I didn't run the install procedure as I was working on my laptop with a dev
setup, just set the symlinks. Now fixed things as proposed by wajasu
on comment #4. Any other suggestion please let me know.
Tested to work on an up-to-date Ubuntu 12.04.
Asked by wajasu, remove remaining obsolete zebraqueue stuff.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simple addition of the koha user to the sample cron file. Might help non-tech
users to get things like incremental indexing to work.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Current script check-url.pl checks URL found in 856$u by sending HTTP
requests, one by one. The next request can't be sent before the previous
one get a result, which can be very slow for dead URL. I propose a new
script which send multiple requests simultaneously which improve
drastically URL checking execution time.
This script is based on AnyEvent and AnyEvent::HTTP CPAN modules.
Add new dependencies AnyEvent & AnyEvent::HTTP.
See doc: perldoc check-url-quick.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
The patches for bug 7001 removed the parseletter subroutine from
C4::Letters without updating the talking tech script to use the
new alternative. This patch rectifies that situation.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
* Add the code necessary to handle authorities with matching rules and
import batches.
* Update all the scripts that use the matcher and import batch code
to use the new API.
* Add authority records to the matching rules interface in the staff
client.
http://bugs.koha-community.org/show_bug.cgi?id=2060
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 11 September 2012
This should make saved reports more manageable.
Group/Subgroup hierarchy is stored in authorised_values,
categories REPORT_GROUP and REPORT_SUBGROUP, connected by
REPORT_SUBGROUP.lib_opac -> REPORT_GROUP.authorised_value
Database changes:
* authorised_values: expanded category to 16 chars
* created default set of REPORT_GROUP authorised values to match
hardcoded report areas
* reports_dictionary: replaced area int with report_area text, converted
values
* saved_sql: added report_area, report_group and report_subgroup;
report_area is not currently used, saved for the record
C4/Reports/Guided.pm:
* Replaced Area numeric values with the mnemonic codes
* get_report_areas(): returns hardcoded areas list
* created get_report_areas(): returns full hierarchy (groups with belonging
subgroups)
* save_report(): changed iterface, accepts fields hashref as input
* update_sql(): changed iterface, accepts id and fields hashref as input
* get_saved_reports():]
- join to authorised_values to pick group and subgroup name
- accept group and subgroup filter params
* get_saved_report():
- changed iterface, return record hashref
- join to authorised_values to pick group and subgroup name
* build_authorised_value_list(): new sub, moved code from
reports/guided_reports.pl
* Updated interfaces in:
cronjobs/runreport.pl, svc/report, opac/svc/report: get_saved_report()
reports/dictionary.pl: get_report_areas()
reports/guided_reports.pl
reports/guided_reports_start.tt:
* Reports list:
- added group/subgroup filter
- display area/group/subgroup for the reports
* Create report wizard:
- carry area to the end
- select group and subgroup when saving the report; group defaults to area,
useful when report groups match areas
* Update report and Create from SQL: added group/subgroup
* Amended reports/guided_reports.pl accordingly
Conflicts:
C4/Reports/Guided.pm
admin/authorised_values.pl
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/dictionary.tmpl
koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tmpl
misc/cronjobs/runreport.pl
reports/dictionary.pl
reports/guided_reports.pl
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Bug 8378 - <fine> syntax broken NFC and charset utf8
NFC normalize enqueued letters and add content-type charset=utf-8
This prevents utf8 codes from causing mysql to truncate the 'content'
from the point of certain codes, when stored in the message_queue table.
This was happenning with the currency symbol generated by
Locale::Currency:Format currency_format routine. NFC normalization
was only done on the attachment content with its content-type
containing "text", as in text/plain.
For emails AND attachments, the charset="utf-8" was added to the
content-type so mail clients would correctly iterate the utf8 codes,
thus preventing mobijake.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ran through test plan before and after applying patch. Verified
that fine syntax does not work pre-patch and does work post-patch
for both direct emails and emails to the KohaAdminEmailAddress.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Suspended holds are showing up in both the holds queue and holds to pull reports.
This patch adds to the sql queries such that any hold that is suspended
is not selected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The script is unusable.
The variable $date is not replaced with its content.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to use branches.* fields in digest notices and
have them be parsed correctly. Also adds a warning to the notices
editor for digests.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I like the idea to show a warning, but I would perhaps move
it under the message body label to be more obvious.
Patch works nicely, branch data of my user's home library
is displayed in the notice.
Replaced existing MaxFine syspref logic with overduefinescap.
Repurposed MaxFine to be the overall overdue limit for all items
overdue. Implemented new MaxFine logic in UpdateFine().
Signed-off-by: Elliott Davis <elliott@bywatersolutions.com>
Tested according to Srdjan's test plan and everything worked like he said it would. I set fined equal to $2 and max fine equal to $1. When I ran the fines script for overdue items fines assessed were only $1.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
$OUTPUT being used but not being declared.
When trying to run this script I gat a nasty:
15:42 ~/koha.dev/koha-community (new/bug_8063 $%)$ ./misc/cronjobs/gather_print_notices.pl
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 81.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 95.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 102.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 106.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 120.
Global symbol "$OUTPUT" requires explicit package name at ./misc/cronjobs/gather_print_notices.pl line 127.
Execution of ./misc/cronjobs/gather_print_notices.pl aborted due to compilation errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Before the patch:
$perl -wc ./misc/cronjobs/gather_print_notices.pl
Global symbol "$OUTPUT" requires explicit package name at
[...]./misc/cronjobs/gather_print_notices.pl line 81.
./misc/cronjobs/gather_print_notices.pl had compilation errors.
With this patch:
$perl -wc ./misc/cronjobs/gather_print_notices.pl
./misc/cronjobs/gather_print_notices.pl syntax OK
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the option -s/--split to enable notices to be separated
into different files by borrower home library.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Fixes the following things:
1. Sanitizes log output to prevent an attacker from using a specially
crafted POST to add extra lines to the log
2. Simplify a regular expression since "..file" cannot be used to
escape the current directory
3. Makes sure directories are consistent
4. Correct logic issues in misc/cronjobs/backup.sh
Thanks to Frere Sebastien Marie for catching these issues.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch builds on work by Lars Wirzenius for the Koha packages.
To date, the only way for a Koha librarian to obtain a complete backup
of their system has been to log into the system via SSH (or FTP) to
download the mysqldump file. This patch makes it possible for
superlibrarians in properly configured systems to download night backups
via the staff client's Export tool.
Recognizing that this is functionality with potentially very grave
security implications, system administrators must manually enable these
features in the koha-conf.xml configuration file.
The following configuration settings have been added to the koha-conf.xml
file:
* backupdir => directory where backups should be stored.
* backup_db_via_tools => whether to allow superlibrarians to download
database backups via the Export tool. The default is disabled, and
there is no way -- by design -- to enable this option without manually
editing koha-conf.xml.
* backup_conf_via_tools => whether to allow superlibrarians to download
configuration backups via the Export tool (this may be applicable to
packages only). The default is disabled, and there is no way -- by
design -- to enable this option without manually editing koha-conf.xml.
This commit modifies the following scripts to make use of the new
backupdir configuration option:
* koha-dump and koha-run-backups in the Debian packages
* The sample backup script misc/cronjobs/backup.sh
Note that for security reasons, superlibrarians will not be allowed
to download files that are not owned by the web server's effective user.
This imposes a de facto dependency on ITK (for Apache) or running the
web server as the Koha user (as is done with Plack).
To test:
1. Apply patch.
2. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
3. Add <backupdir>$KOHADEV/var/spool</backup> to the <config> section
of your koha-conf.xml (note that you will need to adjust that so that
it is pointing at a logical directory).
4. Create the aforementioned directory.
5. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
6. Add <backup_db_via_tools>1</backup_db_via_tools> to the <config>
section of your koha-conf.xml
7. Go to the export page as a superlibrarian. Notice the new tab.
8. Go to the export page as a non-superlibrarian. Notice there is no
new tab.
9. Run: mysqldump -u koha -p koha | gzip > $BACKUPDIR/backup.sql.gz
(substituting appropriate user, password, and database name)
10. Go to the export page as a superlibrarian, and look at the "Export
database" tab. If you are running the web server as your Koha user,
and ran the above command as your Koha user, you should now see the
file listed as an option for download.
11. If you *did* see the file listed, change the ownership to something
else: sudo chown root:root $BACKUPDIR/backup.sql.gz
11a. Confirm that you no longer see the file listed when you look at the
"Export database" tab.
12. Change the ownership on the file to your web server (or Koha) user:
sudo chown www-data:www-data backup.sql.gz
13. Go to the export page as a superlibrarian, and look at the "Export
database" tab. You should now see backup.sql.gz listed.
14. Choose to download backup.sql.gz
15. Confirm that the downloaded file is what you were expecting.
If you are interested, you can repeat the above steps but replace
<backup_db_via_tools> with <backup_conf_via_tools>, and instead of
creating an sql file, create a tar file.
To test packaging: run koha-dump, confirm that it still creates a
usable backup.
------
This signoff contains two changes:
10-1. If no backup/conf files were present, then the message telling you
so doesn't appear and the download button does. Made them behave
correctly.
10-2. The test for a file existing required it to be owned by the
webserver UID. This change makes it so it only has to be readable.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Fix syntax errors preventing the scripts misc/translator/text-extract2.pl
and misc/cronjobs/thirdparty/TalkingTech_itiva_inbound.pl from compiling.
Remove misc/migration_tools/build6xx.pl entirely since it refers to
columns that no longer exist in the Koha database, and has seemingly
had broken encoding since Koha switched from CVS to git (or before!).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Because updating the total issues count associated with a bibliographic
record on issue could cause a significant load on the server, this
commit adds the syspref UpdateTotalIssuesOnCirc (which defaults to OFF
to match existing behavior). The syspref has the following description:
Do/Do not update a bibliographic record's total issues count whenever
an item is issued (WARNING! This increases server load significantly;
if performance is a concern, use the update_totalissues.pl cron job
to update the total issues count).
Bug 6557: automatically increment totalissues
Adds the ability to automatically increment biblioitems.totalissues
whenever an item is issued.
To test:
1) Choose a record with at least one item that can circulate
2) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). Most likely there won't be any 942$0 at all
3) Enable UpdateTotalIssuesOnCirc
4) Check out the item you selected
5) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should now be one greater than before
6) Discharge the item
7) Disable UpdateTotalIssuesOnCirc
8) Check out the item you selected again
9) Check the value of 942$0 (you may need to look at the plain MARC view
on the OPAC). That value should not have changed
Bug 6557: add script to update totalissues from stats
NAME
update_totalissues.pl
SYNOPSIS
update_totalissues.pl --use-stats
update_totalissues.pl --use-items
update_totalissues.pl --commit=1000
update_totalissues.pl --since='2012-01-01'
update_totalissues.pl --interval=30d
DESCRIPTION
This batch job populates bibliographic records' total issues count
based on historical issue statistics.
--help Prints this help
-v|--verbose
Provide verbose log information (list every bib modified).
--use-stats
Use the data in the statistics table for populating total
issues.
--use-items
Use items.issues data for populating total issues. Note that
issues data from the items table does not respect the --since
or --interval options, by definition. Also note that if both
--use-stats and --use-items are specified, the count of biblios
processed will be misleading.
-s|--since=DATE
Only process issues recorded in the statistics table since
DATE.
-i|--interval=S
Only process issues recorded in the statistics table in the
last N units of time. The interval should consist of a number
with a one-letter unit suffix. The valid suffixes are h
(hours), d (days), w (weeks), m (months), and y (years). The
default unit is days.
--incremental
Add the number of issues found in the statistics table to the
existing total issues count. Intended so that this script can
be used as a cron job to update popularity information during
low-usage periods. If neither --since or --interval are
specified, incremental mode will default to processing the
last twenty-four hours.
--commit=N
Commit the results to the database after every N records are
processed.
--test Only test the popularity population script.
WARNING
If the time on your database server does not match the time on your Koha
server you will need to take that into account, and probably use the
--since argument instead of the --interval argument for incremental
updating.
=== TESTING PLAN ===
NOTE: in order to test this script, you will need to have some sort of
circulation data already existing in your Koha installation.
1) Disable UpdateTotalIssuesOnCirc
2) Run: misc/cronjobs/update_totalissues.pl --use-items -t -v
3) If you have total checkout data in your item records (i.e. anything
in 952$l), you should see messages like "Processing bib 43 (1 issues)"
4) Choose one of the lines that shows more than 0 issues, and view the
record with that biblionumber in the staff client, choosing the "Items"
tab (moredetail.pl). Add up the "Total checkouts" listed for each item,
and confirm it matches what the script reported
5) Run: misc/cronjobs/update_totalissues.pl --use-stats -t -v
6) If you have any circulation statistics in your database (i.e. any
'issue' entries in your statistics table), you should see messages
like "Processing bib 43 (1 issues)";
7) Choose one of the lines and view the record with that biblionumber in
the staff client, choosing the "Items" tab (moredetail.pl). If you
count the number of checkouts listed in each item's checkout history,
the total should match what the script reported.
8) Check out an item
9) Run: misc/cronjobs/update_totalissues.pl --use-stats
--incremental --interval=1h -t -v
10) You should see one line reporting a single circ for the bib record
associated with the item you just checked out (there may be more if
you checked out any books in the hour prior to running these tests
11) If the results in steps 4, 7, and 10 match the predictions, the
script worked
This patch to Koha was sponsored by the Arcadia Public Library and the
Arcadia Public Library Foundation in honor of Jackie Faust-Moreno, late
director of the Arcadia Public Library.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested this with my test data - numbers are correct and updated appropriately.
More importantly - if I do a popularity search, the most popular items *come up first*. Amazing.
The variable $i was being re-used and overwriting the necessary value that was being passed to a subroutine. Renaming $i to $j fixed it. I also added an extra safety check within parse_letter that would also have prevented this bug.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch add a new parameter to overdue_notices.pl, that is a date.
If you add --date=YYYY-MM-DD when running overdue_notices, it will generate overdues as if you were on date provided
that's usefull if you want to relaunch an overdue calculation that has failed, of after changing your circ rules
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
There is a flaw in C4::Members::Messaging::GetMessagingPreferences where
the system assumes that every transport will use the same letter. This
is not necessarily true. Even with the default preferences of just
'email' and 'sms', we should be able to have different letters
for each, as one has a maximum character length ( sms ) and one
does not. GetMessagingPreferences currently uses the letter code
of the last result of its query as the letter code for every transport type.
The returned data is a hashref with a key 'transport_types' that is
an array of transport_types this borrower has selected for the given
alert.
This commit modifies GetMessagingPreferences such that the the
'transport_types' array is now a hash where the name of the transport
type is now a key to the value of the letter code set for that transport
type.
It also modifies code calling GetMessagingPreferences where necessary,
and as a side benefit will correctly get the letter codes for email
and sms correctly, if they are defined differently.
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
In use in production by two libraries: Middletown and Washoe
who give their sign off but don't have git to do so.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Implements support for Talking Tech I-tiva phone notification for OVERDUE, PREDUE and HOLD notifications.
Overdues respect triggers as configured for the patron's branch.
Predue and Holds notifications respect patron's messaging preference choices.
A new column for phone notification is added if the TalkingTechItivaPhoneNotification system preference is turned on
Record of phone messages being sent to patrons is added to the patron's Notices
tab; notice of success or failure can be retrieved from I-tiva.
See the TalkingTech.README for installation and set-up instructions.
Aside from the control system preference, and the necessary changes to Messaging Preferences
forms to make use of phone notifications, the bulk of the code resides in external
cronjobs.
TalkingTech_itiva_outbound.pl generates the Spec C file to send to I-tiva. Actual transmission
of the file must be handled by the system administrator.
TalkingTech_itiva_inbound.pl processes the received Results file from I-tiva. Getting the
file from I-tiva to Koha is the job of the system administrator, as well.
Both scripts have a --help option with full documentation.
The only necessary change to core Koha behavior is in C4::Letters::EnqueueLetter. The return
value was changed from 0 or 1 (successful addition of letter to message_queue or not), to the actual
insert ID of the letter. This was required by the outbound script to present a unique Transaction ID
for the notice added to the patron's record (so a 'sent' or 'failed' status could be updated). Since
the dbh and sth are not shared, and the last_insert_id() command is table-specific, this should be thread-safe.
No changes are necessary to any parts of Koha, as all usage of EnqueueLetter currently ignores the return value.
To Test:
1. Turn on TalkingTechItivaPhoneNotification system preference
2. Verify that 'phone' is now a valid notification option for patrons on both staff and OPAC side
3. Attempt to set a 'phone' preference for PREDUE or HOLD messaging; attempt should succeed
4. Set up the patron for notices to triggers:
a. include checked out items due in a range of days, including the value set up in their messaging preferences.
b. place several holds, some in position, others waiting for pickup, others in transit.
c. set the patron up to have overdues, overdue by a range of days that includes the delay values for
the patrons branch and categorycode
5. Run TalkingTech_itiva_outbound.pl --type=RESERVE --type=PREOVERDUE --type=OVERDUE --outfile=/tmp/talkingtechtest.csv
The resulting talkingtechtest.csv file should include all the items due on X days (where X is the patrons' preference),
and none of the ones due in other increments. Similarly, overdues messages should be added for each item due by a delay
value as configured; overdues of other numbers of days should be ignore. Holds that are waiting pick up or in transit should
have messages, those still pending should not.
Messages should be added to the patron's notices tab for each issue sent. Verify these messages exist, and all Notices
tokens are replaced with appropriate information.
Repeat, this time with 4c making use of the default branch overdue triggers, instead of branch-specific triggers.
To test the inbound script, create a CSV with rows in the format "<<Message_id>>","<<SUCCESS or FAIL>>"
Message ID should correspond to the final column of the talkingtechtest.csv file (the transaction id) for the message.
Primary Authorship: Ian Walls
Additional modifications: Kyle M Hall
http://bugs.koha-community.org/show_bug.cgi?id=4246
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested and in use in production by two public libraries : Middletown
and Washoe. Both have given their sign off, but don't have git to
actually sign off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Patch by Judit with a small change to the help wording.
Sponsored by CALYX information essentials.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
svc/import_bib:
* takes POST request with parameters in url and MARC XML as DATA
* pushes MARC XML to an impoort bach queue of type 'webservice'
* returns status and imported record XML
* is a drop-in replacement for svc/new_bib
misc/cronjobs/import_webservice_batch.pl:
* a cron job for processing impoort bach queues of type 'webservice'
* batches can also be processed through the UI
misc/bin/connexion_import_daemon.pl:
* a daemon that listens for OCLC Connexion requests and is compliant
with OCLC Gateway spec
* takes request with MARC XML
* takes import batch params from a config file and forwards the lot to
svc/import_bib
* returns status
ImportBatches:
* Added new import batch type of 'webservice'
* Changed interface to AddImportBatch() - now it takes a hashref
* Replaced batch_type = 'batch' with
batch_type IN ( 'batch', 'webservice' ) in some SELECTs
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
