This patch makes those strings translatable.
Title now depends on element, all on TT file,
removed from pl file
To test:
1. Apply the patch
2. Go to Tools > Label creator
3. Clic on Manage layouts, templates, profilesor batches,
title of currently available must show with fixed
capitalization
4. Update translation languages and check new entries
msgid "Currently available batches"
msgid "Currently available layouts"
msgid "Currently available profiles"
msgid "Currently available templates
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since built-in PDF fonts suport just Latin-1 encoding, we have
to switch to TrueType fonts to correctly encode all UTF-8 characters
(which we should be getting from database anyway).
This approach also nicely sidesteps our encoding cludges, but
requires paths to TrueType fonts which are included in koha-conf.xml
under new <ttf> section. Without this directive in kona-conf.xml
code will still use Latin-1 built-in pdf fonts.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Koha <-> Zebra use MARCXML for the serialization when
using DOM, and USMARC for GRS-1.
* The following functions are modified to set the Zebra record syntax
according to the current sysprefs and configuration:
- C4::Context->Zconn
- C4::Context-_new_Zconn
* A new function 'new_record_from_zebra' is introduced, which checks the
context we are in, and creates the MARC::Record object using the right
constructor.
The following packages get touched to make use of the new function:
- C4::Search
- C4::AuthoritiesMarc
and the same happens to the UI scripts that make use of them (both in
the OPAC and STAFF interfaces).
* Calls to the unsafe ZOOM::Record->render()[1] method are removed.
Due to this last change the code for building facets was rewritten. And
for performance on the facets creation I pushed higher version
dependencies for MARC::File::XML and MARC::Record (we rely on
MARC::Field->as_string).
* Calls to MARC::Record->new_from_xml and MARC::Record->new_from_usmarc
are wrapped with eval for catching problems [2].
* As of bug 3087, UNIMARC uses the 'unimarc' record syntax. this case is
correctly handled.
* As of bug 7818 misc/migration_tools/rebuild_zebra.pl behaves like:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
here we do exactly the same.
To test:
- prove t/db_dependent/Search.t should pass.
- Searching should remain functional.
- Indexing and searching for a big record should work (that's what the
unit tests do).
- Test an index scan search (on the staff interface):
Search > More options > Check "Scan indexes".
- Enable 'itemBarcodeFallbackSearch' and try to circulate any word, it
shouldn't break.
- Searching for a biblio in a new subscription shouldn't break.
- Running bulkmarcimport.pl shouldn't break.
- And so on... for the rest of the .pl files.
[1] http://search.cpan.org/~mirk/Net-Z3950-ZOOM/lib/ZOOM.pod#render()
[2] a record that cannot be parsed by MARC::Record is simply skipped (bug 10684)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a regression on label-item-search.pl introduced by
the patch for bug 9239 where searching for items to add to a label
batch fails with an error if QueryParser is not enabled and you use
the "Added on or before date" search option.
Test plan:
0) Set "UseQueryParser" to "do not try"
1) Start with an installation with bibliografic data and items
information.
2) Check that in items there are values inside Accession Date
Without the patch:
a) Go in Home› Tools› Labels and click on 'New batch'
b) Click on 'Add Item(s)'
c) Try to select items with option "Added on or before date"
d) You will receive an error
With the patch:
Try steps a),b), and c)
Now you don't receive an error and you can select items
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Added a description of the problem and copied the test plan from the bug
report, with the addition of the information that QueryParser must be
off to confirm and test.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This routine is not in used and does not make sense. It should not be
used later.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, not references to get_branch_code_from_name found.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With the inclusion of this patch, all searches will (try) to use
QueryParser for handling queries for both the bibliographic and authority
databases if UseQueryParser is enabled. If QueryParser is unavailable,
UseQueryParser is disabled, or the search uses CCL indexes, the old
search code will be used.
To test:
1) Apply patch.
2) Run the unit test with `prove t/QueryParser.t`
3) Enable the UseQueryParser syspref.
4) Try searches that should return results in the following places:
* OPAC (simple search)
* OPAC (advanced search)
* OPAC (authorities)
* Staff client (header search)
* Staff client (advanced search)
* Staff client (cataloging search)
* Staff client (authorities)
* Staff client (importing a batch using a match point)
* Staff client (searching for an item for adding to a label)
* Staff client (acquisitions)
* Staff client (searching for a record to create a serial)
* ANYWHERE ELSE I HAVE FORGOTTEN
5) Disable the UseQueryParser syspref. Repeat at least some of the
searches you did above.
6) If all searches worked, sign off.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Searching still works as expected for variuos places.
QueryParser syspref seemed to be enabled by default
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch fixes "Error message "Can't bless non-reference value at
/home/pi/koha/C4/Creators/Layout.pm line 111." when trying to add a
label layout while using plack."
The $layout_id variable is set to 5001 on my setup. And 5001 is the Unix
port where I run Plack. WTH is this value stored in this variable ?
Because of
> my $layout_id = $cgi->param('layout_id') || $cgi->param('element_id') || $ARGV[1] || '';
in label-edit-layout.pl
Removing $ARGV[1] solves the problem
Also removing $ARG[0] because I also don't think it's useful
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed off after confirming with Chris Nighswonger that these scripts
were not intended to be run from the command line. Works as promised.
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- remove all exit(1) and replace them with __END__ which benefits CGI
- insert correct =cut markers at end of POD (required for CGI::Compile
under plack to correctly parse source code and exeute it)
- scope variables with our which are used inside sub for plack
Signed-off-by: Mirko Tietgen <5p4m@gmx.de>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch touches a lot of code, but basically it removes version
information from use C4::* in our code.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
All script still compiles after the patch (confirmed by pre-applypatch hook)
It appears that the name of a variable was changed,
but the declaration of said variable was not.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the ability to print the name of the item's homebranch on labels
Thanks to Shane Sammons <ssammons-at-npelem.com> for the modified SQL SELECT statement.
Document Manager: The documentation will need to be updated to reflect the added field 'branchname' to the list
of available fields for label printing.
To test:
1. Create a new label layout or modify an existing one to include 'branchname'
2. Create a new label batch or using an existing one, export the batch.
3. Verify that the resulting labels contain the home branch name for the respective items.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested with the plan - works
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
squashed chris_n's two patches. Label export works again. Also changed the pattern for the item_number to the known working, critic friendly pattern.
Don't change $_ in a list context
Changed the 3rd bit to the critic friendly pattern chris_n suggests in the previous two lines.
Signed-off-by: Brendan <brendan@bywatersolutions.com>
In the 5 places in the label editor, the user's current branch is determined by taking
the LoginBranchname and doing a reverse look up for the branchcode. This is an unnecessary
query, since C4::Context->userenv has the immediate access to the branchcode; this is how
it's summoned in all other points in the Koha code.
This addresses bug 6673 because, since the move to T:T, the call in tools/manage-marc-import.pl
has used in correct syntax: $template->param('LoginBranchname') instead of $template->{VARS}->param('LoginBranchname')
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a 'No Profile/N/A' selection to the printer profile
drop-down menu along with code to handle the selection of it. This
selection is the default selection for new templates.
Documentation should be updated to reflect this change.
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The sample bib label layouts and the hard-coded default
format_string for new layouts used 'callnumber' when they
should have used 'itemcallnumber', preventing call numbers
from being printed on spine labels that use the system-supplied
layouts. Besides correcting the sample data, this patch
now also enshrines 'callnumber' as an alias for 'itemcallnumber'.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
After applying patch it works for new and old layouts (itemcallnumber and callnumber).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Manage Batch had no branch set
- New Batch had no branch set
- Add link on item result list was broken, missing the batchid
To test:
Create a new batch and add items one by one. Look at 'Manage batches'.
Check that the branch in the top right corner is always correctly shown and set.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Remove some unnecessary checks when check of error is
sufficient. Make the order in some cases more logical
Should remove some possibilities of runtime warning noise.
Although some calls belong to the 'Nothing could
ever go wrong' school have added some warnings
Signed-off-by: Christophe Croullebois <christophe.croullebois@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This is due to the incorrect use of string comparators to compare numeric values.
This patch corrects that.
Note: This should be backported to 3.2.x
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This was due to the use of an OR which seems to have caused the
param method to be called in a scalar context thus returning only
the first of multiple repeated cgi params.
This patch retains the intent of the OR by replacing it with a
conditional.
Signed-off-by: Koustubha Kale <kmkale@anantcorp.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the ability to enter items into label batches via
barcode scanning
Work sponsored by Tamil - http://www.tamil.fr
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This is due to the underlying script not having any defaults hard coded which results
in skewed hash elements when the parameter array is coerced into a hash at a later point.
This also occurs in layouts and profiles. This patch adds defaults to all three.
No documentation changes are necessary.
This fixes:
* A bug which caused the label template editor to throw
an error when saving when no previous profile was applied.
* A typo which caused a 'fetch without execute' error in Labels.pm
It also comments out several useless warns
Two issues here:
1. No radio box was selected by default in the format section of the layout editor. This actually needs some additional attention to allow the user
to establish a default method of entering the format string. As noted in comments in the code, this would probably be best implimented by adding yet
another syspref. However, I don't have time atm.
2. On saving a new template, if no profile was assigned to the new template, the script threw an error and died.
Both issues are addressed in this patch.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
As discussed with Chris Nighswonger on #koha, this patch
removes the calls to syslog and replaces them with warns
so that error messages generated by the labels code
are sent to the Apache error log. This avoids splitting
this sort of logging across multiple files and is consistent
with current practice in most of the rest of Koha.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
