To test:
1. Make some patron reasons for suggestion via Home > Administration > Authorized values > OPAC_SUG
2. Give those reasons a description.
3. Make several suggestions via staff client and/or OPAC and apply some of the reasons you just made
4. Apply patch
5. Go to Home > Acquistions > Suggestions management
6. Give some of the suggestions some different status (PENDING/REJECTED/ACCEPTED/ect)
7. Make sure on each of the tables you can see the column 'Patron reason'
8. Go to Administration > Table settings and attempt to hide the column.
9. Confirm that the column is properly hidden on the Suggestions management page
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to define password_expiry_days for a patron
category.
When defined a patron's password will expire after X days and they will
be required to reset their password. If OPAC resets are enabled for the
catgeory they may do so on their own, otherwise they will need to
contact the library
To test:
1 - Apply patch, updatedatabase
2 - Set 'Password expiration' for a patron category
Home-> Administration-> Patron categories-> Edit
3 - Create a new patron in this category with a userid/password set,
and an email
4 - Confirm their password_expiration_date field is set
SELECT password_expiration_date FROM borrowers WHERE borrowernumber=51;
5 - Create a new patron, do not set a password
6 - Confirm their password_expiration_date field is NULL
7 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration_date='2022-01-01' WHERE borrowernumber=51;
8 - Give the borrower catalogue permission
9 - Attempt to log in to Straff interface
10 - Confirm you are signed out and notified that password must be
reset
11 - Attempt to sign in to OPAC
12 - Confirm you are signed out and notified password must be reset
13 - Enable password reset for the patron's category and perform a
password reset
Note: you will have to find the link in the message_queue unless
you have emails setup on your test environment
SELECT * FROM message_queue WHERE borrowernumber=51;
14 - Confirm that you can now sign in and password_expiration_date field
is set 10 days in the future
15 - Expire the patron's password again
16 - Change the patron's password via the staff interface
17 - Confirm they can sign in and the expiration is updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This page updates the table settings page so that it uses Bootstrap's
"Collapse" feature instead of jQueryUI's Accordion.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> Table settings.
- You should see a list of table settings which looks much the same as
it did before, with arrow icons prefixing each section header. All
panels should be collapsed.
- Test expanding and collapsing panels to confirm it's working
correctly.
- When you expand a section the heading arrow should change from
right-pointing to down.
- Make a change to one of the table configurations. After clicking
"Save" the page should reload with the same panel expanded.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the MARC and authority subfield edit interface to
replace jQueryUI tabs with Bootstrap. The code for handling
drag-to-reorder tabs is updated to accommodate the new markup.
To test, apply the patch and restart_all.
- Go to Administration -> MARC bibliographic framework -> Default
framework and choose "MARC structure" from the Actions menu.
- In the row for 000 LEADER, click Actions -> View subfields.
- Click "Edit." On the edit page the tabs should look correct and work
correctly.
- Return to the list of tags and click "View subfields" for the 245 tag.
- Click one of the "Edit" buttons for any but the first subfield, e.g.
"a".
- On the "Tag 245 Subfield constraints" page the "a" tab should be
pre-selected.
- Click any of the subfield tabs and drag it to re-order it in the
sequence of tags.
- It should stay in the correct slot when you release it.
- Save and confirm that the new sequence of subfields has been saved.
Perform all the same tests under Administration -> Authority types.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Table settings for the account_fines table (in the Patrons section, the
"Transactions" table in a patron account) are missing a checkbox for the
"Updated On" column. Because of this, one cannot hide the Updated On
column and any other values one sets here get applied to the wrong
columns.
This patch adds timestamp to account-fines column settings.
To test:
1) Navigate to columns settings page and modify account-fines tables
column.
=> Note that if you hide e.g. account_type column, column
credit_number is hidden on patrons account page
2) Apply patch and update database.
=> Account-fines column settings has now a option to hide timestamp.
=> Correct columns should now be hidden.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the detail view the number of columns changed, we cannot use the
default sort order here.
It certainly can be done on a different way but I prefer to postpone it
for now and see later.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
because of desc
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
because of desc
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
'stateSave' so need to test on the first try or delete the relevant local storage
entry
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Pagination is done server-side
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the acquisition table the sort option is not available as we don't
offer the ability to selection asc/desc and default to asc.
We cannot offer default_display_length for those tables.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Set noItemTypeImages and OpacNoItemTypeImages to "No" and confirm
that the first column (the image) is not displayed. Otherwise test as
"normal"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Here we need to deal with the other DT config (in datatables.js, not
columns_settings.inc).
Test plan:
Same as "normal"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
"normal" means that we are expecting the table to have the 2 options
implemented and working.
You can select "Default display length" and "Default sort order"
in the "table settings" administration view, then go the the view
and confirm that the table has the configured values pre-selected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The syspref NumSavedReports can be moved to the table settings config
Test plan:
1. Set the syspref to a given value
2. updatedatabase # execute the atomic update
3. Go to the table settings page and confirm that the syspref's value
has been retrieved
4. Select a specific colonne for the default sort
5. Go to the report list view and confirm that the "Show X entries" has
the correct selected value and that the table is sorted as you expect.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A first step to "validate" the MARC mappings: Remove all whitespace, so
if a user enters "245a " (with a trailing whitespace, which can easily
happen when copy/pasting) we only store "245a" in the DB. This is
neccessary, because the ES indexer will throw an exception in an invalid
MARC mapping.
Test Plan:
* Go to /cgi-bin/koha/admin/searchengine/elasticsearch/mappings.pl
* Go to the Bibliographic Records Tab
* Enter "100 a b c " (notice the whitespaces!) in the first "mapping"
field
* Scroll down and save
* Go back to the Bibliographic Records Tab
* The spaces are still there
Now apply the patch
* Repeat the above steps
* After saving you should see "100abc" without any spaces in the
"mapping" field
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch uses the new 'standard' field to in the edifact account
configuration area to allow setting the message standard as either
'EDItEUR' or 'BiC'.
This just replaces the currently hard coded hash of SAN's in
Koha::Edifact::Order to distinguish between the two standards instead of
requireing a bug submission per vender san we identify to be a BiC type
vendor.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are using json files to retrieve the list of the DB columns. We can
reuse what we have done in the previous patch and display translated
strings.
Test plan:
Search for "unwanted" in the sysprefs
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test, apply the patch and clear your browser cache
1. Go to acqui-home.pl
2. Test that the "Columns" button works to show and hide columns.
3. Go to Administration -> Table settings and look under the Acquisitions tab for the page 'acq_acqui-home' and the table 'accounts'.
4. Hide each column and make sure it hides correctly on acqui-home.pl
5. Test the export options (Excel, CSV, etc) and make sure hidden columns do not show up.
6. Make sure the totals at the bottom of the screen can still be calculated
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also addresses QA test tools, perldoc in ImportExportFramework.pm
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the comments from Comment 29 and the import
functionality. You should now be able to import an exported file without
editing the file at all and the authority type code will be overwritten
in the file (same behaviour as biblio frameworks).
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch amends C4::ImportExportFramework to work for authority types as well as MARC frameworks.
New file: admin/import_export_authtype.pl
Update: Ensuring we are passing the right column to the right tables.
Update2: Making the error messages the same to be consistent with patch on Bug 15665
Update3: Fixing merge conflicts
Update4: Fixing merge conflicts and removing tabs
Update5: Getting rid of warns, making sure Import and Export of default
authority will work
Update6: Merge conflicts and making sure export of default auth type
works
Update7: Fixing merge conflicts and updating buttons to bootstrap3
To test:
1) Go to Admin -> Authority types
2) Confirm there are two new columns 'Export' and 'Import' in the table
3) Click 'Export' on an existing authority type and choose a file type, click 'Export'
4) Confirm that the authority type is exported as your chosen file type. Save the file
5) Create a new authority type
6) Import into your new authority type using the file you just exported
7) Confirm you are taken to auth_tag_structure.pl
8) Go back to Authority types
9) Export your new authority type. View the exported file and confirm
the authtypecode has been updated to match the code you set for the new
auth type
10) Click 'Import' next to any existing authority type and attempt to import a file that is not XML, CSV or ODS. Confirm that this fails and you are asked to import a file of the correct file type
11) Confirm Export and Import work for the Default authority type
12) Go to Admin -> MARC bibliographic framework
13) Confirm that the 'Export' and 'Import' functions still work here as well
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Two new routes that do the same thing
/api/v1/acquisitions/funds/owners
/api/v1/acquisitions/funds/users
To list the possible owners and users for a fund
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Have some holds and build the holds queue.
2. Go to view_holdsqueue.tt, there is no patron category column
3. Apply patch
4. Look again, there should now be a column for 'Patron category'
showing both the caterory name and the category code.
5. Make sure you can sort and filter by this new column
6. Go to table settings and make sure you can properly hide this column
and all other columns in the Holds queue.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the option of using a remote image for an authorized
value, just as you can with item types.
To test, apply the patch and go to Administration -> Authorized values.
- Click "CCODE" to view the collection authorized values.
- Edit a collection code.
- In the form, under "Choose an icon," there should now be a "Remote
image" tab.
- Enter a remote image url, e.g. https://via.placeholder.com/50/FF0000/FFFFFF.png
- Click "Save."
- After the page redirects to the list of collection codes you should
see your image in the table next to the code you edited.
- Test that you can still edit a collection to set "No image" or to
use one of the local image sets.
- Test that remote images can also be added when adding a new
collection.
- Make sure "ccode" is in the "AdvancedSearchTypes" sytem preference.
- Go to the catalog's advanced search page and click the "Collection"
tab.
- You should see your collection image in the list of collections.
- Perform the same check in the OPAC.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
JD amended patch: fix indentation
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Have some holds awaiting pickup, also have some holds that have been waiting longer than the ReservesMaxPickUpDelay is set to.
2. Go to /cgi-bin/koha/circ/waitingreserves.pl
3. There is no expiration date
4. Apply patch and restart_all
5. Now there should be a Expiration date column, make sure you can see it in both Holds waiting and Holds waiting over X days
6. Make sure all the columns Waiting Since, Date hold placed, and expiration date still sort correctly
6. Go to Table settings, and make sure all the columns hide correctly for both of the holds_awaiting_pickup tables ( holdst & holdso )
Note: This patch also corrects 2 other small problems
1. Corrects a problem where the table settings did not account for the checkbox column at the beginnning of each table
2. Removes the title-string class and uses data-order to sort Waiting Since, Date hold placed, and expiration date ( see Bug 27934 )
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
