This patch allows to resend both sent and failed messages.
With messages in 'sent' status, we have to be careful not to accidentally send
sent messages again. With the previous patch using GET request, this was likely
to happen because of browser storing the GET parameters.
This patch changes request method from GET to POST. Instead of a simple link,
we now have a form element.
In notices.pl we redirect back to notices.pl, because with POST there is a risk
of resending the message accidentally by form resubmission at refresh.
To test, find/create a Patron that has sent or failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the sent or failed message
4. Observe that there is nothing for resending the sent or failed message
5. Apply the patches.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Letters module does not have a GetMessage subroutine, which
could be quite useful.
This patch adds it and simplifies the code added by the previous patch.
It also adds a few tests and fixes POD typos.
Note that ResendNotice only resends failed messages. This will avoid to
resend already sent messages (using an url from the browser history for
instance).
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds a link 'Resend' under a notice in 'failed' status
in the Patron's Notices tab.
By clicking the link, we will request notices.pl with parameter
"resendnotice=XXXXX" where XXXXX is message_id. In notices.pl,
we then check whether the given message is actually in 'failed'
status. If so, we use the C4::Letters::ResendMessage(123) to
change the status of the message into 'pending'. This way it
will be processed again by the cronjob process_message_queue.pl.
To test, find/create a Patron that has failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the failed message
4. Observe that there is nothing for resending the failed message
5. Apply patch.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The "highlight" class on table rows is unnecessary since we have a CSS
rule which defines colors for alternating row colors. This patch removes
use of the "highlight" class from templates and removes the definition
from staff-global.css
To test, view the affected pages and confirm that the change has not
broken anything.
Acquisitions -> Vendor -> View basket
Acquisitions -> Late orders
Acquisitions -> Ordered
Acquisitions -> Vendor -> Receive shipment
Acquisitions -> Spent
Acquisitions -> Vendor details -> Contracts table
Administration -> MARC frameworks (comment removed only)
Administration -> Class sources
Authorities -> Authority search results
Catalog -> Bibliographic detail page -> Items -> View item's checkout
history
Catalog -> subject.tt (is this template used?)
Cataloging -> Cataloging search results
Patrons -> Patron account
Reports -> Patrons who haven't checked out
Reports -> Statistics wizards -> Patrons
Reports -> Top lists -> Most-circulated items
Reports -> Inactive -> Items with no checkouts
Reports -> Reports dictionary
Reports -> Statistics wizards -> Circulation
Reports -> Statistics wizards -> Holds
Holds -> Place a hold -> Existing holds table
Serials -> New subscription -> Search for a vendor -> Search results
Serials -> Check expiration
Serials -> Subscription -> Serial collection
Serials -> Subscription -> Serial collection -> Edit serials
Suggestions
Tags -> View tags -> View titles with a tag
Tools -> Manage staged MARC records -> Batch (I think the affected
section of this template is obsolete)
Tools -> Log viewer -> Log result
Lists -> View lists (May be broken by Bug 15916)
Note that if you search the templates for instances of a <tr> with a
"highlight" class you'll find two instances in slip templates which
refer to a class defined in printreceiptinvoice.css.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Looks good. Haven't seen any regression.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch replaces the email address text overflow solution implemented
by Bug 3256 with a CSS3 technique: text-overflow: ellipsis
https://developer.mozilla.org/en-US/docs/Web/CSS/text-overflow
To test, apply the patch and clear your browser cache. Edit the primary
email address of a patron so that it is very long. View that patron in
the staff client (on the checkout or details page, for instance) and
confirm that the email address is truncated with "..."
Confirm that the link and the title attribute of the link contain the
correct, full email address.
Revision uses a percentage instead of a fixed width for email display in
the sidebar to accommodate varying sidebar widths. Also added: Handling
of all email addresses displayed on the patron detail page. Although
email addresses in the body of that page were not in the scope of the
original patch, it's a good improvement to include those as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The CardnumberLength system preference defines card number minimum and
maximum allowed values when adding a patron. This information is
currently hidden in a title attribute on the card number input field.
This patch moves the information into a <div class="hint">, matching
other fields in the entry form which offer details about entry
guidelines.
To test, apply the patch and open the new patron entry form. Test for
various values of CardnumberLength, and with 'cardnumber' mandatory or
not mandatory as defined in BorrowerMandatoryField.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.
Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'
Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.
Here are some examples:
Sprint phonenumber@messaging.sprintpcs.com
Verizon phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T phonenumber@txt.att.net
Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'
6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.
7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Revert "DBRev to make notes of the XSS patches and the new important dependency."
This reverts commit e140603a59.
Revert "Bug 13618: Specific for branches.opac_info"
This reverts commit 06e4a50f00.
Revert "Bug 13618: (follow-up) Specific for other prefs"
This reverts commit d6475a111f.
Revert "Bug 13618: Fix for debarredcomment and patron messages"
This reverts commit dd98c9df92.
Revert "Bug 13618: Do not display html tags in patron's notices"
This reverts commit a065b243fe.
Revert "Bug 13618: Do not display and html tags in item fields content"
This reverts commit baeeaffbf8.
Revert "Bug 13618: Fix for system preference description"
This reverts commit a967a09261.
Revert "Bug 13618: Remove html filters for newly pushed code"
This reverts commit 0e98662b10.
Revert "Bug 13618: (follow-up) add missing lines for opac-shelves"
This reverts commit fc2fb605e5.
Revert "Bug 13618: (follow-up) Specific for ColumnsSettings"
This reverts commit bc308fdd9c.
Revert "Bug 13618: Fix for edit biblios and items"
This reverts commit 811c4e8402.
Revert "Bug 13618: followup to remove tabs"
This reverts commit ca8e8c397c.
Revert "Bug 13618: Fix last occurrences recently introduced to master"
This reverts commit bb417b256b.
Revert "Bug 13618: Fix for news"
This reverts commit ae5b98020a.
Revert "Bug 13618: Fix escape on sending baskets or shelves by email"
This reverts commit a7731ffe25.
Revert "Bug 13618: Specific for XSLTBloc"
This reverts commit 11fa38dc29.
Revert "Bug 13618: Specific for Salutation on editing a patron"
This reverts commit 36c07ad6d3.
Revert "Bug 13618: Specific for other prefs"
This reverts commit e6ea281a3b.
Revert "Bug 13618 - memberentrygen.tt errors Not a GLOB reference"
This reverts commit 7824874557.
Revert "Bug 13618: Specific for ColumnsSettings"
This reverts commit 1834da3da3.
Revert "Bug 13618: Specific for IntranetUser* and OPACUser* prefs"
This reverts commit 21ae62b253.
Revert "Bug 13618: Fix error 'Not a GLOB reference'"
This reverts commit 602bdbab4c.
Revert "Bug 13618: Specific for the ISBD view"
This reverts commit d254362435.
Revert "Bug 13618: Specific for pagination_bar"
This reverts commit 8837a8ae68.
Revert "Bug 13618: Specific places where we don't need to escape variables - intra"
This reverts commit 00eff140b3.
Revert "Bug 13618: Remove html filters at the intranet"
This reverts commit 7db851ff03.
Revert "Bug 13618: Specific places where we don't need to escape variables"
This reverts commit 49a3738b8d.
Revert "Bug 13618: Remove html filters at the OPAC"
This reverts commit cedaa0e23e.
Revert "Bug 13618: Use Template::Stash::AutoEscaping to use the html filter"
This reverts commit 01b38d3b13.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This followup on top of remote branch
Only remove tabs and trailing spaces to make koha-qa pass
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Like Jonathan said:
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
Replaced it with a SWITCH, like the other patch for this similar error.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
The easier fix is to replace it with a SWITCH.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This enhancment adds the ability to suspend and resume individual holds
from the holds table on circulation.pl and moremember.pl.
The interface is inspired/cribbed from the same feature already
available in the opac.
Test Plan:
1) Apply this patch
2) Find a patron with holds
3) Suspend a hold with no resume date
4) Resume the suspended hold
5) Suspend a hold with a resume date
6) Resume the suspended hold
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to patron Details page (ie http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51)
2) Confirm that '(x years)' is showing next to the Date of Birth and is correct according to DOB (ie if DOB: 30/11/1996, Age: 19 years)
3) Edit date of birth to be a month later (ie from 30 November to 30 December) so that, as of the date you are testing, the patron has not had their birthday yet
4) Confirm that age changes to be one year younger
5) Edit date of birth to be a different year
6) Confirm that age changes accordingly
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If a patron's privacy settings are set to "Never" for keeping a reading history, "Export today's
checked in barcodes" returns an empty file. This patch does not allow to export in such case.
To test:
- Apply patch
- Check out / check in in some items
-Test toolbar:
- On user's detail page, go to More->Export today's checked in barcodes
- Verify that the menu item does not appear if syspref 'intranetreadinghistory'
is set to 'Don't allow'
- Verify that the menu item appears if syspref 'intranetreadinghistory'
is set to allow and
- that the menu item is grayed out with a tooltip if the user has set privacy
settings to never keep a reading history
- that the menu item works as before if user's privacy settings allow reading history.
- Test left tab "Circulation history":
- Verify that the left tab "Circulation history" does not appear if syspref
'intranetreadinghistory' is set to 'Don't allow'
- Verify that the tab appars if syspref 'intranetreadinghistory' is set to 'Allow' and
- that a message appears if user's privacy settings do not allow to keep the reading history
- that the export works as before if user's privacy settings allow to keep the reading history
(Amended and changed test plan for comment #9)
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Argument "" isn't numeric in numeric lt (<)
TEST PLAN
---------
1) Go to any patron in staff client
2) Click 'Edit'
3) Check error logs
-- warnings should exist.
4) Apply patch
5) Reload page
-- warnings should not be triggered.
6) Add restriction and save
7) Go back to edit screen
-- restriction should be shown
8) Remove restriction and save
9) Go back to edit screen
-- Should say "Patron is currently unrestricted"
10) Run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Deleted View record link and made patron details open in a new tab.
To Test: Edit personal details for a user on opac and submit update
request.
In staff client go to patrons requesting modifications.
Confirm view record link is gone and patron details opens in new tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I don't think it's a good idea to open a new tab (let the user decide)
but the behavior already existed before this patch.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The patron's information displayed in the member module
(includes/circ-menu.inc and includes/member-display-address-style-*.inc)
are not always displayed the same way.
Sometimes the streetnumber is missing, sometimes it's the streettype.
Sometimes the streettype is after the address, sometimes before...
Test plan:
Go on a patron detail page, and open all the tabs on the left (Check
out, Fines, Notices, etc.)
Without this patch, the patron's info displayed will differ from one page to
another.
With this patch, they will be displayed the same everywhere.
Followed test plan, works as expected. (Tested both patches together.)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Using a mouse to click on the alphabetic index letters works even though
the anchor markup doesn't contain an href attribute. However you
can't tab to them using the keyboard, and I assume the issue with
screen readers is related.
This patch adds a dummy href attribute and a class-based click handler
so that we can get rid of the "onclick" attribute in the markup.
To test, apply the patch and visit the "Patrons" section.
1. Use the tab key to move the focus to one of the alphabet links.
2. Hit "Enter" and confirm that the search is performed correctly.
3. Click any of the alphabet links and confirm that clicking works as
well.
4. View the details of any patron and click the "Add child" button.
5. In the "Guarantor information" section click the "Change" button.
6. In the search popup, use the tab key to move the focus to one of the
alphabet links.
2. Hit "Enter" and confirm that the search is performed correctly.
3. Click any of the alphabet links and confirm that clicking works as
well.
Signed-off-by: Briana <brianagreally@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch changes the options to the date picker, allowing easy
selection of dates up to 120 years from the current date.
To test:
- Click on 'Patrons' from the main menu, select 'New patron'
- Set input focus to the 'Date of birth' input field,
the date selection widget should show up.
- The year selection drop-down will only show current year minus 10.
- Apply the patch
- Go back to the same screen, set input focus to the 'Date of birth' field.
- The year selection drop-down should show current year minus 120.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply the patch
2) Type into search form patron's name & check his date of birth in
autocompletion
3) Go to intranet/cgi-bin/koha/members/member.pl & submit
a search with more than one result .. now should in the table appear
patron's date of birth
4) Try show/hide columns section if it works correctly for date of birth
5) Go to intranet/cgi-bin/koha/admin/columns_settings.pl -> go to
patrons section & check there is dateofbirth & it's functionality
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described. Syspref dateformat respected. Column dateofbirth
configurable, but mandatory on autocompletion search result.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When nl-search.pl gets data from the Norwegian national patron
database, it does so in an XML format that has Norwegian element
names. nl-search.pl displays the data with the Noregian element
names as labels. This means Norwegian words turn up in translations,
which is messy. This patch replaces the Norwegian labels with
English ones.
To test:
- Only Norwegian libraries and vendors get access to search against
the national patron database, so a proper functional test is not
possible
- Alternative 1: Just have a look at the nl-search.tt template
before and after the patch and verify that after the patch the
Norwegian strings that would be visible to a user are gone
- Alternative 2:
- Verify that e.g. en-GB-staff-prog.po contains the Norwegian
string "kjonn"
- Apply the patch
- Create new .po files with e.g. "./translate create en-GB"
- Verify that "kjonn" is now gone from en-GB-staff-prog.po
Version 2: Tweak a couple of labels to be more in line with labels used
elsewhere in Koha, to avoid variants when translating.
Version 3: Replace e.g. "Gender: </span>" with "Gender:</span> " to
avoid similar-except-for-whitespace strings in translation.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
A few new strings, all previous removed.
No koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Add a hold to a patron
2) Go to patron page
3) Click Print Summary
4) Confirm that 'Pending Holds' table displays with correct information under appropriate headings (should be Title, Author, Placed on (reserve date), Expires on (expiration date), and Pick up library)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch fixes the filename categorie.pl correcting it by categories.pl
The plurial is usually used for script names in the admin module.
Test plan:
Navigate to the patron categories page.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
No reference to categorie.pl anywhere in the code
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Login to OPAC --> You personal details.
2) Ensure it says 'ZIP/Postal Code' under Main Address, Alternate Address and Alternate Contact
3) Login to Staff interface --> Go to a member's page (ie koha/members/memberentry.pl) --> Details.
4) Ensure it says 'ZIP/Postal Code' under Alternate address and Alternative contact
5) Click Edit
6) Ensure it says 'ZIP/Postal Code' under Main Address, Alternate Address and Alternate Contact
Signed-off-by: Barry Cannon <bc@interleaf.ie>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Tested together with second patch.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch set display amounts for charge, fine, price etc. right aligned in tables
on patron pages.
To test, apply patch and verify that amounts appear right aligned on following pages:
- Go to Home > Patrons, perform a search (Column 'Fines')
- Go to a patron with fines and credits
- Checkout tab (circulation.pl): Columns 'Charge', 'Fine', 'Price'
(maybe you have to show column with 'Show / hide colums')
- Fines Tab > Pay fines (pay.pl): Columns 'Amount', 'Amount Outstanding'
- Fines Tab > Account (boraccount.pl): Columns 'Amount', 'Outstanding'
Note: Test here 'Filter paid transactions' as well
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
- log with a user that have "borrowers" permission but not "Remaining circulation permissions"
- go to a borrower's detail page (who has at least a loan) and click on "show checkouts"
- check that you see loan(s) and that you can't renew and checkin
- Do the same with a borrower that have "Remaining circulation permissions"
- check that you see loan(s) and that you can renew and checkin
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch replaces semantically ambigous words "From" and "To" in
koha-tmpl/intranet-tmpl/prog/en/modules/members/members-update.tt
for better translatability.
To test:
- Apply patch
- Make sure that patrons can request detail changes in OPAC
(sysprefs opacuserlogin, OPACPatronDetails)
- Log in to OPAC, request a change of personal details
(cgi-bin/koha/opac-memberentry.pl)
- Log in to staff client
- Click link 'Patrons requesting modifications' or go to
Home > Patrons > Update patron records
- Verify that table headers make sense
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translation purpose
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Fix sentences in memberentrygen.tt that are split by <strong> tags, leading to
wrong capitalization in German (because it can not be decided if a string is part
of a sentence or a standalone sentence).
Example: Es sind Keine Bibliotheken definiert.
To test:
- Apply patch
- To trigger the messages, you have to edit a patron in a system where
no libraries and no patron categories are defined
- Alternatively, carefully review the changes in
koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Sentences fixed for translation purposes
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If one save the login and password used to authenticate in staff interface, when creating a new patron, those login and password are filled in the corresponding inputs in the form.
This behaviour is awkward from web browser.
A trick is provided by http://stackoverflow.com/questions/10738090/why-firefox-autocomplete-even-with-different-input-name
I found that the best way is to use an hidden disabled input between userid and password.
Test plan :
- Log into Koha
- Allow the browser to save the userid/password
- Be sure that you have only one userid/password for this Koha
- Loggout
- Re log to check the browser autocomplets the authentication form
- Create a new patron
=> Without patch your saved userid/password have been added to the form
=> With patch your saved userid/password have not been added to the form
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is not elegant but it works.
Note that the problem does not exist with Chromium
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In Koha 3.16 or earlier, before the introduction of the ajax datatable
for patron searching, the search results were ordered by name. In
master, the results are currently ordered by cardnumber, which is not
very useful.
Test Plan:
1) Do a "browse by last name" or a patron search
2) Note the results are sorted by card number
3) Apply this patch
4) Reload the page, start a new search
5) Note the results are sorted by name
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce / test
- Log in to Opac
- Go to "your personal details"
- Request a change of the date of birth
- Log in to Staff client
- Follow link to Patrons requesting modifications
(/koha/members/members-update.pl)
=> The date is not formatted in syspref format
- Apply patch, reload members-update.pl
=> The date is formatted in syspref format
- Approve changes
- Verify that changes are saved
This is independent from C4::Dates removal.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Changes saved Ok, Update patron record follows
dateformat syspref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
By not limiting the patron modification lists by branch, it can quickly
become overwhelming for a librarian. This patch makes the following
modifications:
* Only superlibrians will see the full list of borrowers with pending
modifications.
* Adds the patron cardnumber after the patrons name on the modification
list.
* Adds a link to the patron's record from the modification list.
Test Plan:
1) Apply this patch
2) Set up some pending modifications for two branches
3) Log in to the staff intranet as one of those branches
4) You should note the number of pending modifications counts
only your logged in branch's patrons
5) Click the link, you should only see your logged in branches
patrons in the pending modifications list.
6) You should note the cardnumber is displayed next to the patron name
7) You should note the "View record" link below each patron's name
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should be using Font Awesome for our icons instead of Glyphicons, for
the reasons discussed on bug 13696.
Test Plan:
1) Apply this patch
2) Note all Glyphicons have been replaced with FA icons in the staff intranet
3) git grep "icon-" ./koha-tmpl/intranet-tmpl/prog/en/modules/
should give no results
4) git grep "icon-" ./koha-tmpl/intranet-tmpl/prog/en/includes/
should give no results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
We need a follow-up to cover the files changes since this
patch was written. Especially to cover the changes in the
label creator modules.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
print slip and show the member detail page, the 3 dates date of birth,
date enrolled and date of expiry should be displayed correctly.
Followed test pan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tested with the three values from dateformat syspref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set moves the permissions' descriptions to the po files
instead of having them in the DB.
Test plan:
0/ Apply all patches
1/ Create a new installation
2/ Confirm the userflags and permissions tables are correctly populated
3/ Update the po file for a translated language
4/ Confirm you are able to translate the permissions descriptions
5/ Install the template files for this language
6/ Switch the interface to use this language and confirm the string are
correctly translated.
QA Note: At this point we could remove the userflags.flagdesc and
permissions.description DB fields, but I would prefer to keep them:
developers will know what the permission do without the need to go and
see the include file (we have it in the sql files and so, in the DB).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a typo member vs members in the template when retrieving the
existing settings.
So that all columns are displayed, even the ones which are hidden
(sort_order, due_date_unformatted, etc.)
Test plan:
0/ Does not apply this patch
1/ Go on the columns config page and check some fields not to display by
default for Patrons > moremember > issues-table
2/ Go on the patron detail page (with checkouts), click on the "show/hide
columns" button (top right of the table).
Confirm that the config is not taken into account and that it's ugly
(hidden columns are displayed)
3/ Apply this patch
4/ Everything should be fine now :)
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a(nother) vestige of Koha (2.2?).
This patch removes unused code related to the 'ethnicity'.
In detail:
There is no way to fill the ethnicity table.
There is no way to fill the borrowers.ethnicity and borrowers.ethnotes.
BUT if borrowers.ethnicity exists, the value is displayed on
members/moremember.pl (and only here).
Test plan:
Apply this patch and confirm there is no regression on
adding/updating/deleting patrons.
Note that you don't see the ethnicity value on the moremember.pl page even if a patron has it.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
