Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The additional materials check when CircConfirmParts is enabled was
errantly relying upon the 'FORCE_CHECKOUT' permission. This patch
updates the template to allow confirmation as well as cancellation of
chekout.
Test plan
1. Set a staff member with circ permissions, but not FORCE_CHECKOUT
2. Turn on CircConfirmItemParts
3. Log in as staff member in step 1
4. Attempt to checkout an item with a 952$3
5. The only option given is the Continue button (with a red X) and when
clicked, the item does not get checked out.
6. Apply patch
7. Repeat step 4.
8. You should now have the option to 'Yes, check out (Y)' or
'No, don't check out (N)'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes 2 links on the page:
* The tag within the 'all tags' cloud
* The tag shown in the 'your tags' table
Test plan as before: Test with a tag like +++
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This applies the same fix as the first patch but to the staff
interface detail page. With this fix, a tag like +++ can
be clicked and the tagged records will show.
To test:
- Tag some records in the staff interface with something like +++
- Go to the detail page of one of those recods
- Click on the tag
- Verify nothing is found
- Apply patch
- Repeat - all tagged records will show
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1. Turn on: TagsEnabled.
2. Log in to the OPAC and create a tag like "LGBTQ+"
3. Add that record to a list
3. Now try clicking on that tag from detail, results, and lists page.
4. If you click on the link for the "LGBTQ+" you will get a 'no results found page'.
5. Apply patch
6. Try clicking on each of the tags in detail, results, and lists. They should work now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's possible to place item-level hold without selecting a pick-up
location, which causes problems: if the item is then returned,
Koha tells about a hold, but gives error 500.
At patron's hold tab you see the number of holds, but cannot see the
actual holds there. However, if you go to the title in question,
then modify the hold so that it has a pick-up location,
then the hold will work normally again.
This patch fixes already existing but not working JS error message and
ensures that hold cannot be made while pickup location is undefined.
To reproduce:
1. Go to admin page, to the libraries configurations, and disable
pickup location for one of them.
2. Pick any biblio that has items that have that same library as a
default pickup location.
3. When placing the item-level hold, notice that the pickup location
dropdown box is empty by default. Keep it empty, place the hold.
4. Go to the patron's page of the patron who you placed that hold for,
check that it doesn't show the new hold.
5. Apply patch.
6. Repeat steps 2 and 3, it shouldn't let you make the item-level hold
until you select a specific pickup location.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 26145 added the ability to add local cover images to items.
If SeparateHoldings is set, items from other libraries are displayed in
a separate tab, and not considered as visible. We have a JS test to
assume that images not shown are not present, this only apply for the
images for the bibliographic record, as they can come from different
sources.
Test plan:
Turn on LocalCoverImages and SeparateHoldings
Create a record with different items coming from different libraries
Attach images to items and to the biblio
Notice that with this patch you can see the images from the "Other
holdings" tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In bug 28959 category was replaced in favor of public. But
unfortunately a few places were missed.
This fixes the addbybiblionumber templates.
Test plan:
Add a biblio to a list from the search results using the Add to
or Add to list button on OPAC/intranet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply this patch
2. Go to /cgi-bin/koha/acqui/acqui-home.pl
3. The columns button should be restored, make sure you can hide/show columns correctly.
4. Go to Table settings and make sure you can hide columns properly by default.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They need more complex solutions that would be better in a follow up ticket
to not drag this one too long.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To be sure translators don't think it's wrong and translate it plurally.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Due to conditions. Things like "Edit batch" need to be keept in one
strings.
Also removed some capitalization because it wasn't needed and wasn't
consistend with <title> and <h1> which had now capitalization.
Also fixed patron edit-batch.tt and edit-layout.tt because they were
incomplete in regard to their label counterparts. They had the condition
on description and batch_id but weren't displaying anything different
between the two cases.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the 1st patch, sometimes they where left out
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
includes/background_jobs_update_elastic_index.inc
vs
includes/background_jobs/update_elastic_index.inc
Both exist and have been added by bug 27344.
The first one is not used.
Test plan:
git grep background_jobs_update_elastic_index.inc
must not return any occurrences (outside of POs)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The serials search page serials/serials-search.pl has HTML body id :
<body id="ser_serials-home" class="ser">
It is the same as serials home page.
This patch replaces with id="ser_serials-search"
Test plan :
1) Go to Serials > Advanced search
2) Look at HTML code
3) Check you see <body id="ser_serials-search" class="ser">
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes a couple cases actually.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the itemnumber and biblionumber attributes for
recalls having been renamed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds course name to the breadcrumbs and page title on the
pages for adding items to a course.
To test, apply the patch and go to course reserves.
- Click a course to view it.
- Click the "Add reserves" button.
- In the breadcrumbs you should see:
Home > Course reserves > [Course name] > Add reserves
- [Course name] should link correctly to the course detail view. In the
page title you should see:
Add reserves > [Course name] > Course reserves > Home
- Enter a barcode or biblionumber and proceed to the next step. Confirm
that the same changes are in effect on the second page.
- Perform the same tests in the "Batch add reserves" process.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Barcode is trimmed of leading/trailing whitespaces in many instances
before the barcodedecode sub was called. This patch instead makes that
barcodedecode sub is going to trim it itself and removes unnecessary,
and repetitive code that was used before barcodedecode was called.
Steps to test:
1. Edit item with any barcode, add a bunch of whitespaces at the start
and at the bottom of it. Save the item. Ensure that this action ruins
the barcode and ensure that the spaces are still there by editing the
same item again.
2. Apply the patch.
3. Edit the same item again in the same fashion. Ensure that now all
whitespaces are getting trimmed and it doesn't affect the barcode in
any negative way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Modifying an existing element of additional content (News) by changing
the library causes a duplication of the entry on the Additional contents
(News) list. A subsequent attempt of deleting one of the entries results
in deleting both of them. This is due to the fact that after
the unwanted duplication all the entries share the same
additional_contents.code.
Test plan
=========
1. Create a piece of news under Tools > News.
2. After having saved it make a modification by changing the library.
It should result in two rows in the table.
3. Delete one of the lines with Delete button. Both lines will
disappear.
4. Apply the patch.
5. Repeat the steps 1 and 2. Only the one (the modified) entry should be
present in the table.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Change of text from "pin" to "PIN" in the 2FA setup interface.
This slight changes clarifies that "PIN" is an acronym,
and increases user comprehension
To test:
1) Log in as an Administrator
2) Enable TwoFactorAuthentication
3) Log in to a user with superlibrarian permissions.
4) On the user profile page, click the "More" dropdown button,
click "Manage Two-Factor
5) Check that "pin" is displayed in lowercase, in both instances.
6) Apply patch.
7) Refresh the page and observe that "pin" has changed to "PIN"
8) Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check for the OPACHoldRequests to determine whether a
message should be shown to patrons whose account is over the
maxoutstanding limit.
To test, apply the patch and set the "maxoutstanding" system preference
to a low value. Set OPACHoldRequests to "Allow."
- Log in to the OPAC as a patron who has outstanding fines or charges
which exceed the maxoutstanding value you set.
- You should see a message on the "Your summary" page, "Holds are
blocked because your fine balance is over the limit."
- Set OPACHoldRequests to "Don't allow" and refresh the "Your summary"
page in the OPAC. The message should disappear.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes an extra point after the number of shown results.
Test plan :
- don't apply patch
- run a report that brings you more than 20 results, e.g. SELECT * FROM biblio LIMIT 50
- see extra ' .' after the number of shown results
- apply patch
- run the report again and see the point isn't displayed anymore
- check the behaviour is still correct when you change the number of rows displayed
- sign off !
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace Display/Don't display (and some other pairs) by Show/Don't show in system preferences.
Test plan:
1- Go to administration > system preferences
2- View any system preference with Display/Don't display pair of options
(e.g. OPACAcquisitionDetails)
3- Apply the patch
4- Refresh the page and notice it is now a Show/Don't show pair instead
5- Loop the steps with other system preferences until satisfied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to their accounts tab
2) Note how the patron name displays in the title, breadcrumb and
headings
3) Click through to make a payment
4) Note how the patron name displays in the title, breadcrumb and
headings
5) Apply the patch and reload the page
6) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Note: This patch also removes a superflous hidden title form element
that was simply passed to and from the controller but not actually used
in any way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to edit their permissions
2) Note how the patron name displays in the title, breadcrump and
headings
3) Apply the patch and reload the page
4) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The feature is not experimental at all.
To test:
1. Search for the RESTOAuth2ClientCredentials syspref
=> FAIL: It says it is an experimental feature
2. Apply this patch and reload
3. Repeat 1
=> SUCCESS: No longer marked as experimental
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the basket groups interface so that it doesn't rely
on YUI to move baskets in and out of groups. The patch also removes
all YUI assets and many long-obsolete references to YUI-related classes
and IDs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Go to Acquisitions.
- Locate a vendor with multiple closed baskets.
- Click "Basket groups" in the sidebar menu.
- Create or edit a basket group.
- On the basket group page you should see the basket group form in one
column and ungrouped baskets in another.
- Both grouped and ungrouped baskets should be in a sortable
DataTable.
- Test that when you click the "Add to group" button on an ungrouped
basket the row is removed from the table of ungrouped baskets and
added to the table of grouped baskets.
- The button text on the row should now read "Remove."
- Test the reverse operation: Clicking "Remove" on a grouped basket
should move it to the table of ungrouped baskets.
- Test that when all baskets are moved out of either of the tables a row
is displayed with a message specific to that table, e.g. "There are no
ungrouped baskets."
- Test that the basket group saves correctly when zero or more baskets
are added to the group.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a similar check to the patron details shown when selecting
the details tab in the patron account in the staff interface.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It appears that in my original submission ( Bug 9021 ),
I hid the SMS provider selector unless the SMS::Send
driver was set to "Email", but only on the OPAC,
not on the staff interface!
Test Plan:
1) Set SMSSendDriver to anything except "Email"
2) Note the SMS Provider pulldown shows in the patron editor
3) Apply this patch
4) Reload the page, SMS Provider id should now be gone
5) Set SMSSendDriver to "Email"
6) Reload the page, SMS Provider should now be shown
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a few markup errors in the addorder2709 template. The
modal dialog markup is corrected and moved out of the loop of records so
that it doesn't create repeating id attributes. Obsolete CSS is removed,
fixing the width of the MARC preview modal.
The calendar include is added, fixing a Flatpickr error in the console.
Double ID attributes are removed from the Statistics 1 and Statistics 2
fields.
To test, apply the patch and test the process of adding an order to a
basket from a staged MARC file. Test in particular:
- The MARC and Card previews
- The "Date acquired" field under the "Item information" tab should
trigger a Flatpickr widget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the template for ordering from a MARC file so that
the indentation is consistent.
This patch does not fix a couple of bugs which will be fixed in a later
patch: The MARC modal window has the wrong width, and there is a
Flatpickr error in the console.
To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.
- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that everything still works correctly:
- Tabs work correctly
- JavaScript controls (select all, show inactive, etc.) work
- MARC and Card previews work
- Adding orders works
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just modifying the hint provided in patrons' messaging preferences to
allow either + or 00 for international formats.
No test plan needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.
This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).
To test:
1) You need to have installed a SMSAlert plugin. Make sure the
SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie :
111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
that format should not be accepted: this is intentional.
10) Sign off.
Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds to the configuration of the date of birth field in the
patron entry form so that the calendar widget prohibits the selection of
a date in the future.
To test, apply the patch and open a patron record for editing. Try to
select a birth date in the future using the calendar widget. You should
be limited to a selection of today or before.
Confirm that clicking the "Yesterday" and "Today" shortcuts in the
calendar widget works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.
If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.
To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
