Our librarians requested a reminder to unset "gone no address" flag from patron's
record once the patron has made a modification request to update their address.
I propose adding a message box under patron modification request to notify
librarians about patrons that have gone no address flag on, and an option to
unset the flag without the need of having to navigate into patron's details.
To test:
1. Apply patch
2. Set "Gone no address" flag for your test patron. You can do this by going
to patron modification screen in staff client.
3. Go to OPAC with your test patron
4. Make a modification request for your personal details
5. Go to staff client and see pending modification requests
6. Open the request you just created
7. Observe a message dialog that says this patron has gone no address flag set
8. Check the checkbox to unset the flag and approve the modification request
9. Click Submit
10. Observe your test patron no longer has gone no address flag set
11. Repeat steps 2-7
12. Do not check the checkbox, but approve the modification request
13. Observe your test patron still has gone no address flag set
14. Remove the gone no address flag from your test patron
15. Repeat steps 3-6
16. Observe there is no message dialog for gone no address
Followed test plan, patch worked as described. Also ran QA test tools
and all modified files passed
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the status showed in holds history table.
The determination of status is following:
1. "hold.found is 'F'" - Fullfilled - the hold was fullfilled by checking the
item to patron. If hold reaches this state, it can't changed status
anymore, or be cancelled, that's why this goes first
2. "hold.cancellationdate is filled" - When the hold is cancelled, its
eventually waiting or in transit status remains the same, only
cancellation dat is filled, so this has to go second
3. "hold.found is 'W'" - Hold is waiting
4. "hold.found is 'T'" - Hold is in transit to target library
Test plan:
0) Apply the patch
2) Read the status determination note in this commit message and confirm
it makes sense
1) Have patron/patrons with at least one hold in every status
2) Go to holds history page and confirm it show the right status
3) Try to break the status determination ;)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Adds 'holds' to pref description of intranetreadinghistory
- Fixes typo in link to holds history from patron account
- Changes reserve date to hold date in table heading
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Have a patron with some current and old reserves
1) Go to patron circulation page
2) Notice, there is new item called "Holds history" in the left
circulation menu
3) Go to this page and confirm the data on this page are OK, and that
ui does behave as expected
4) Go to adminitration, columns setting, try to change the setting for
holdshistory table and confirm it is taken into account on holds history
page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Those files appear unmaintained and unusable with current
Koha and should be removed.
It appears at some point there was work done on a feature
to send SMS messages to a phone number using a form in
the tools area.
This has never been documented, files and git history
make it look like work remained unfinished.
sms/sms_listen_windows_start.pl
- targetted for Windows, which is not supported by Koha
00-strict.t
- reference to sms removed
sms/sms_listen.pl
- refers to a table sms_messages that doesn't exist
- uses getmember() that doesn't exist
sms/sms.pl
- script calls routines that no longer exist in SMS.pm
error_codes(), parse_phone(), write_sms()
- template sms-home.tt is not accessible form anywhere
in the templates
sms-home.tt
- see sms/sms.pl
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Makes sense. 00-strict.t runs OK after applying the patch.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems better to display the warning if the user tries to enter too
many characters in the input.
Test plan:
With max=16
1. Copy/paste a string with 15, 16 and 17 characters
2. Enter a cardnumber of 15, 16, 17 characters
The warning should be displayed only the input overflows
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch displays a message if the user tries to enter more than the
max number of characters for a cardnumber.
To test:
1) Apply patch and go to Patrons -> New patron
2) Scroll down to Card number
3) Put in any characters. Notice that when you have entered the max
number of characters, you are unable to type any more.
4) Click out of the text field (so it loses focus), the error message will show up.
5) if you backspace some characters and click out of the text field
again, the message should disappear
Sponsored-by: Catalyst IT
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the error code is not known or empty, provide the message too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested this by adding a die on shelves.pl line 180 (my $added = eval ..)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Apply patch and go to Lists
2) Click on an existing list or create a new list
3) Add items by barcode, confirm this functionality still works
4) Trigger error messages (adding duplicate barcodes, barcodes that
don't exist) to confirm they still show as appropriate
5) Test adding by biblionumber, confirm this works as expected
6) Trigger error messages (adding duplicate biblionumbers, biblionumbers
that don't exist). Confirm wording is appropriate in messages.
7) Add both barcodes and biblionumbers at the same time, confirm this
works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Israelex A Veleña for KohaCon17 <israelex19@gmail.com>
Signed-off-by: Israelex A Veleña for KohaCon17 <israelex19@gmail.com>
Signed-off-by: Harold <harold.sabanal@gmail.com>
Signed-off-by: macon lauren KohaCon2017 <caballeromaricon@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 17214: [FOLLOW-UP] Using Koha::Biblios instead of GetBiblio
Ready to test
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a summary to the OPAC once the user has logged in that
shows the users number of checkouts, overdues, holds pending, holds
waiting and total fines. We also have a syspref OPACUserSummary to turn
this feature on and off. Default is ON.
To test:
1) Apply patch and update database
2) Set up some checkouts, overdues, holds pending AND waiting and fines
for a user
3) Log into OPAC as that user, see summary. Confirm links all work as
expected
4) Confirm that if there are no checkouts / overdues etc that the link
disappears from the summary
5) Turn OPACUserSummary OFF and confirm the summary does not show on the
mainpage.
Sponsored-by: Catalyst IT
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Regression introduced by bug
commit 141200794d
Bug 15295: Koha::Libraries - Remove GetBranchCategories
The intranet advanced search page offers to search for groups of
libraries, even if the pull down is empty as no library groups have
been defined.
Test plan:
- Go to the adv search page at the intranet
- Without library group you must not see the "Groups of libraries"
dropdown list
- With at least a library group you must see it
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Message pops up for all instances of cloning now.
Works as expected.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a Javascript security question which is displayed
to the user when they try to clone a circulation rule to a specific
branch when the rule is a 'Standard rule for all libraries"
The rationale for this patch is when the cloning takes place it
overwrites the existing rules of the destination branch and there is no
notification of this to the user. Therefore by implementing this patch
the user is asked if they want to clone the rule (if the rule is
standard accross all libraries) and are told that it
will overwrite the rules in the destination branch.
Test plan:
1. Create a circulation rule for all libraries
2. Make sure the 'select a library' option is set to 'Standard rules for all
libraries"
3. Click the 'Clone' button and notice that the cloning takes place
without any warning that it will overwrite the rules of the destination
branch
4. Apply patch
5. Return to the circulation and fine rules page
6. Repeat step 2
7. Click the clone button and notice a alert box appears asking if you
are sure you want to clone the standard rule to the destination branch.
Note: The name of the destination branch is included in the alert.
Also note that the user is informed of the consequences of performing
the action, i.e. that it will overwrite the existing rules in the
destination branch
8. Click 'Cancel' and notice that no cloning occurs
9. Click the clone button again and this time click 'OK' and notice
that the cloning takes place
10. Return to the Circulation and fine rules page and set the 'Select a
library' option to the name of an individual branch
11. Click the clone button and notice that the clone action takes place
Sponsored-By: Catalyst IT
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The form provided on top of the page if Koha find a duplicate
patron is not closed. This cause some trouble.
Test plan:
- Edit the syspref IntranetUserJS and type the following code:
"$(document).ready(function() {
$("#memberentry_library_management").insertBefore("#memberentry_identity");
});"
- create a patron so that Koha will warn you about a duplicate one,
- click on "Not a duplicate. Save as new record",
- you should get error(s) about empty field(s).
Note that now, the library management part's fields are empty or
reset to default
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Patch applies and functions as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While editing a record in the staff client, if you clone a repeatable
dropdown subfield the cloned subfield's tag is empty. This can result
in data loss if the record is saved, re-opened, and saved yet again.
This patch (originally written by Sophie MEYNIEUX for bug 17818) fixes that.
Test plan:
0) [PREREQUISITE] In your MARC framework (Home > Administration > MARC
bibliographic framework) ensure that you have at least one subfield
of a particular tag linked to an authorised value (e.g. in UNIMARC,
tag 700 subfield 4 is 'Relator Code' and can be linked to CCODE for
testing purposes). This is so that the relevant subfield will be a
dropdown menu and not a textbox.
1) In the Staff Client, edit an existing record or create a new one.
Then, try to clone any subfield that is a dropdown menu. Observe
that the cloned subfield's tag is empty.
2) Apply the patch.
3) Hit CTRL-F5 in your browser (to ensure cataloging.js is re-loaded)
and try to clone a dropdown menu subfield again. This time the tag
is cloned as well.
Working as intended.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=16503
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Security bug, trivial changes, no need to provide procedure for script
kiddies.
Test plan:
Pay fines using the different options from the "Pay fines" tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a floating toolbar to the staff client search results
page, making all the various controls visible as the user scrolls down.
To test, apply the patch and perform a catalog search in the staff
client.
- The toolbar should "stick" to the top of the page as you scroll down.
- Controls in the toolbar should all work correctly:
- Select all / Clear all
- Highlight / Unhighlight
- Add to Cart
- Cart notifications should be positioned correctly
- Add to list (and all list menu controls)
- Place hold (including controls which are visible when
a "Search to hold" has been initiated
- Z39.50/SRU search
- Sort
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the OPACShowBarcode syspref in favour of the new
columns settings option introduced by bug 16759.
On the upgrade step, it picks the value for OPACShowBarcode and uses it
to populate the columns_settings table.
To test:
- Verify the upgrade process maintains the current behaviour
Regards
Sponsored-by: Dover
Followed test plan and works as expected. Functionality of patch from bug 16759
appears intact too.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a system preference SCOMainUserBlock to display custom HTML
on the self checkout page.
To test:
- Set up self checkout (see section Self Checkout in Circulaton sysprefs )
- Apply patch
- Update db
- Add some HTML system preference SCOMainUserBlock
- Go to sco page
- Verify that HTML displays on page (logged in and not logged in)
New version based on Koha.Preference TT plugin as of comment #7
Depends on Bug 12691
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The idea was to keep the current behaviour, plus adding the option to
display on a separate column.
We need an explanation on the syspref description, stating that it is not enough to
choose 'on a separate column', enabling the colum in the columns
settings is required for it to take effect.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the option to show shelving locations on a separate
column. This is controlled by a new syspref, 'OpacLocationOnDetail',
which replaces 'OpacLocationBranchToDisplayShelving', adding a
conveniente 'column' option.
The new 'Shelving location' column is conveniently added to the columns
configuration entry added by bug 16759 for this purpose.
The current behaviour is preserved.
To test:
- Apply this patches
- Run the upgrade:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ perl installer/data/mysql/updatedatabase.pl
=> SUCCESS: Upgrade doesn't fail
- Have an item with shelving location set to something not void
- Have the item set home and holding libraries for testing purposes.
- Set 'OpacLocationBranchToDisplay' to 'home and holding libraries' [*]
- Visit the OPAC detail page for the record containing the item
=> SUCCESS: Both home and holding libraries are displayed.
- Loop through all OpacLocationOnDetail options (except from 'column', we leave it for later).
=> SUCCESS: Works as expected.
- Go to Administration > Columns settings
- Make item_shelving_location available in the OPAC section
- Reload the OPAC detail page
=> SUCCESS: No change
- Set OpacLocationOnDetail to 'on a separate column'
- Reload the OPAC detail page
=> SUCCESS: Shelving location is displayed on a separate column
- Sign off :-D
Sponsored-by: Dover
[*] For testing purposes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the holdings table in the OPAC biblio detail page
configurable using the Columns configuration tools.
This patch:
- Moves the holdingst table from plain DataTable to KohaTable
- Creates a sample yml colvis configuration for this table
containing all the currently available columns
To test:
- Visit some record's detail page in the OPAC
- Apply this patch
- Reload
=> SUCCESS: The page shows the same information
- On the staff interface, go to:
Home > Administration > Columns settings
=> SUCCESS: There's a new OPAC section containing the configuration for
holdingst.
- Choose to hide some fields (both currently displayed and currently hidden).
- Reload the OPAC detail page
=> SUCCESS:
- Required fields are hidden
- It doesn't explode because of trying to hide stuff that is not there to start with
- Sign off :-D
Sponsored-by: DOVER
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
New option creates a single item batch, this may cause issues for some
libraries or they may want to disbale this feature. Adding a class to
the list item allows it to be hidden easily
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For testing
1) Look for any records.
2) Go to the material edit page.
3) Under Actions you will see Print label under Duplicate.
4) When you click Print Label, the relevant material will be redirected
to the Label Creator module in the Tools menu.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Eivin Giske Skaaren <eivin@sysmystic.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client cart template so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of the
cart: All button controls, DataTables functionality.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Correction for QA: Removed contditional around footer JS (from
copy-paste) because it will always be true.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds IDs to the item search results table header so that
columns can be targeted by CSS or JS. The CSS for the item search page
has been modified to give the title column a minimum width.
To test, apply the patch and clear your browser cache if necessary.
Perform an item search and confirm that the title column stays at a
reasonable width.
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that we have a check client-side, nothing prevents us from a smart guy to
bypass it and force an invalid password.
This patch adds two new subroutines to Koha::AuthUtils to check the
validity of passwords and generate a password server-side. It is used
only once (self-registration) but could be useful later.
Moreover the 3 different cases of password rejection (too leak, too
short, contains leading or trailing whitespaces) were not tested
everywhere. Now they are!
This patch makes things consistent everywhere and clean up some code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The length of the passwords generated for a patron should not be as long
as the value of minPasswordLength.
It is the minimum required size of a password, not the maximum!
So let's fix it to 8 if the minPasswordLength if < 8, that sounds
reasonable and less risky for patrons.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Indeed if RequireStrongPassword is set we need at least 3 characters to
match 1 upper, 1 lower and 1 digit.
We could make things more complicated to allow minPasswordLength < 3
but, really, 3 is already too low...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes a really ugly way to generate a password: the whole
template was sent and parsed to retrieve the "#defaultnewpassfield" node.
To avoid the password to be sent plain text it is certainly better to
generate it client-side.
The same kind of passwords will be generated: 0-9a-zA-Z
The while loop prevents to get an invalid generated password.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To validate password fields we need to use the validate jQuery plugin.
To make things reusable this patch adds a new include file
'password_check.inc' at the intranet and opac sides, it creates 3 new
validation methods:
- password_strong => make sure the passwords are strong enough according
to the values of the RequireStrongPassword and minPasswordLength prefs
- password_no_spaces => prevent passwords to be entered with leading or
trailing spaces
- password_match => make sure both password fields match
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset prevents users to enter too leak password, controlled by
a new syspref RequireStrongPassword. If set the staff and patrons will have
to enter a strong password.
The strongness cannot be modified, it has been arbitrarily set (by the
author of this enhancement) to at least 1 lowercase, 1 uppercase and 1
digit. This can be inforce by increasing the value of the existing
minPasswordLength pref.
I decided to turn this feature on, it cannot hurt! For existing installs
it will have to be turned on manually.
Writing these patches I found a lot of inconsistencies all around the
password checks and decided to refactor everything to make things
consistent and more robust.
Now the password validity is check at only one place (subroutine
covered by tests).
Test plan:
We have several places where a password can be change/created:
a. Editing a patron (members/memberentry.pl)
b. Changing the password of a patron (members/member-password.pl)
c. Changing your own password at the opac (opac/opac-passwd.pl).
OpacPasswordChange needs to be set
d. Reseting your own password at the opac
(opac/opac-password-recovery.pl). OpacResetPassword needs to be set,
see "Forgot your password?" link when you are not logged in
e. Self registration feature, PatronSelfRegistration needs to be set.
You will also need to add 'password' to PatronSelfRegistrationBorrowerMandatoryField.
Note that '****' is considered by Koha internally that the password is
not changed (existing behavior).
To fully test this patch you will need to test the different
combinations of RequireStrongPassword and minPasswordLength.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SelfCheckoutByLogin lists 'Barcode' as an option, but this should be
Cardnumber. Especially since more and more libraries are using chip
cards instead of barcodes.
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Followed test plan again and patch still applies and works as expected.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Followed test plan and patch applies and functions as described
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Have some overdued checkouts in your database
2) Go to circulation -> overdues (overdues.pl)
3) Try to sort the overdues table by due date and notice it is sorted
alphabetically, not by date
4) Apply the patch
5) Try again and confirm, it is sorted by date
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
'Show all details' add columns on the basket summary page.
This link is broken if the basket is closed.
Indeed there is a JS error raised by $('#toolbar').fixFloat();
The toolbar is not displayed if the basket is closed.
This is caused by bug 12333, which added the floating toolbar.
Test plan:
Create 2 baskets with orders
Close 1 basket
Click on the 'show all details' links and confirm it works as expected
Also confirm that the toolbar works correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Steps to reproduce:
1. Create a new basket
2. Choose "Add to masket"
3. Choose "From a staged file"
4. Select a file
5. Save without selecting a fund
Expected results: A validation error should be shown, and form submit
halted.
Actual results: No validation error is shown and form submits.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds a new basket attribute (create_items) that can optionally be
set to override AcqCreateItem.
The following have been modified to reflect this (with the value of
create_items that causes them to behave differently in parentheses):
* Cancelling receipt of an order (receiving)
* Creating an order by hand or from MARC (ordering)
* Receiving an order (receiving)
* Showing orders with uncertain price (ordering)
* Showing orders (receiving)
* Showing acquisition details in the OPAC (ordering)
Test plan:
1) Create baskets with "Create items when:" set to ordering,
receiving, cataloging and unset.
2) Test each of the above for each of these baskets, verifying that
the basket-specific attribute overrides AcqCreateItem if set and
falls back to the syspref otherwise.
NOTE: A check of AcqCreateItem in opac-detail.tt was removed because it
was redundant; the code path in question cannot be triggered unless
create_items/AcqCreateItems is set to the correct value anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Fondren <bfondren@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Fill the authorised values's category 'SUGGEST' with reason
- Edit a pending suggestion. Set the status to rejected
and select a reason
- Check the reason has been saved (i.e in the suggestions
table of rejected tab)
- Check in the corresponding message_queue that the reason
is here
- Re-edit the same suggestion
- Check that the correct reason is selected by defaut
- Edit an other pending suggetion. Set the status to rejected,
select other reason and fill the input text
- Re-edit the previews suggestion and make sure the input
"other" is displayed by default with the correct value
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Moves the location of the button in question to be below the framework selector
Test plan:
1. Go to Tools -> Stage MARC records for import
2. Upload a .mrc file and stage it for import
3. Click Manage staged records
4. Note that the import button appears above the framework selector
5. Apply patch
6. Refresh the window
7. Notice that the button has now moved to below the framework selector
Sponsored-By: CALYX information essentials
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Insert some value to staffBaseURL preference, without starting http://
2) Apply the patch
3) Update database
4) Go to system preferences adminsitration, find the staffBaseURL
preference, the inserted value should be prepended with 'http://' and
the comment should be "This should be a complete URL, starting with
http:// or https://. Do not include a trailing slash in the URL. (This
must be filled in correctly for CAS, svc, and load_testing to work.)"
5) prove t/db_dependent/Auth_with_cas.t
6) prove t/db_dependent/selenium/basic_workflow.t
7) prove t/db_dependent/check_sysprefs.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Overdue rules do not save when a delay that is not an integer > 0,
without any warnings.
This patch forces the user to select a number > 0.
Test plan:
Without this patch applied, enter non-integer value or negative or 0
=> The rule will not be inserted without any warnings.
With this patch applied you will get an message from the browser and the
form will not save
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the sequnce of form fields for card height and card width.
To test:
- Apply patch
- Edit or create a patron card template
- Verify that the fields display in sequence Page height - Page width -Card height - Card width
Followed test plan, worked as intended
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the release team for 17.11 to about template.
Test plan:
Check the changes with the wiki pages for 17.05 and 17.11.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch speaks for itself.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The explanation on list categories on the shelves form is removed.
The online help text is actualized.
Test plan:
Go to Lists in staff. Edit a list. The remarks about private and public
lists on the right side are gone.
Click Help. Read the adjusted text. Does it make sense?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are other scripts where the borrower variable is not defined and
the fields are passed one by one.
To have a consistent behaviour we should add the title at the different
places.
Note that this script also add the use of the include file for
statistics.tt and remove the pass of parameters to the template, already
done later:
99 $template->param(%$borrower);
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To look the same as OPAC.
To test:
1) Do a catalogue search in staff client that results in more than one
page
2) Notice pagination is only at the bottom
3) Apply patch and refresh page
4) Notice pagination is at top also
Sponsored-by: Catalyst IT
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Have changed
my $last_page = $pages * ( $results_per_page - 1 );
to
my $last_page = ( $pages - 1) * $results_per_page;
which seems to fix the 'last' button offset! (Comment 10)
Will add the box to jump to a page in a separate patch.
Adding the pagination to the top on the staff client will be dealt with
in Bug 18916 as it is slightly out of the scope of this bug.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See Comment 8.
Test:
When on first page of results, confirm that the 'First' and 'Previous'
buttons do not show. Confirm they come back on the second page and every
page after.
When on last page of results, confirm that the 'Last' and 'Next' buttons
do not show. Confirm they come back on all previous pages.
Check on both staff side and OPAC.
Sponsored-by: Catalyst IT
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds first and last page buttons to the pagination at the
bottom of a page of catalog search results.
To test:
1) Apply patch
2) Do a number of searches
3) For each search, ensure that the first and last page buttons work as
expected
Sponsored-by: Catalyst IT
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you hit the renewal limit on the renewal tab, the message gives you a
message like:
"Windows 8 / ( 50610018249545 ) has been renewed the maximum number of
times by Johnny Test ( 12345678 )"
And has a button that reads:
"Ignore and continue"
This button is misleading, as it may be interpreted as "ignore the limit
and continue to renew the item".
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Place a hold on an item
2. Search for the patron who the hold is associated with
3. View the Hold(s) tab of the Checkouts page and notice there is a
column with the text 'Delete?' and a button below the table with the
text 'Cancel marked holds'
4. Apply patch
5. Notice that the column text described in step 3 now has the text
'Cancel?' and the button text is the same as it was in step 3
Sponsored-By: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After order is deleted we don't have a vendor or basket so we get blank
breadcrumbs, this removes them
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan remains the same.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to Acquisitions -> Find a vendor -> View a basket with orders in
it (or make a new basket and add an order)
2) Click Cancel order
3) Notice incomplete breadcrumbs, and 'Acquisition' typo
4) Apply patch and refresh page
5) Breadcrumbs should be fixed. Confirm links to vendor and basket work
as expected
Sponsored-by: Catalyst IT
Signed-off-by: severine.queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1 - Have a patron with guarantees
2 - Charge some fines to the guarantees
3 - View the patron
4 - Fines are displayed unformatted
5 - Apply patch
6 - Refresh
7 - Fines should now be formatted correctly
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When searching for a patron from the circulation tab, the results table
shows the date of birth unformatted.
Test plan:
Apply this patch, search for patrons in the circ tab and confirm that
the date of birth are correctly formatted according to the dateformat
syspref
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When CircSidebar is activated, "Transferred items" table at
Circulation -> Transfers goes under the sidebar. This patch fixes the issue.
To test:
1. Enable CircSidebar system preference
2. Go to cgi-bin/koha/circ/branchtransfers.pl
3. Enter a barcode and click submit
4. Observe transferred items table under the circulation side bar
5. Apply patch
6. Enter a barcode and click submit
7. Observe transferred items is now correctly displayed
8. Also test with CircSidebar system preference deactivated
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19374: (follow-up) Remove stray closing div tag
To test:
1. Apply first patch and validate the document e.g. here
https://validator.w3.org/#validate_by_input
2. Observe "Stray end tag div." error
3. Apply this patch and validate again
4. Observe no errors
5. Go through test plan from first patch to make sure things still look nice
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: m23 <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This syspref is going to be used for populating field 008, range 15-17
with a desired default. It is currently hardcoded to 'xxu'. If not set,
it will still fallback to 'xxu'.
Signed-off-by: m23 <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
cataloging.js might not always be loaded with select2.js, so we should
check its availability to prevent JS errors
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Overview:
Repeat tag fails if authority field has select subfield (for example, UNIMARC 700$8, 800$a)
This patch adds Select2 to authority editor
Steps to Reproduce:
In authority editor repeat field that has select subfield
Actual Results:
Field does not repeat (copy is not created).
Console shows a js TypeError in cataloging.js: «$(...).select2 is not a function»
Expected Results:
Field will repeat (copy is created)
Additional Information:
Error happens in version 16.11+ after adding Select2 js functions. The easiest way to fix is to add Select2 to authority editor
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Apply the patch
1) Go to administration -> system preferences -> staff client
2) Read the description by IntranetSlipPrinterJS and confirm it's right
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When created, batch_record_modification.tt has been based on
batch_delete_records.tt
These attributes are not used in the template and not set in the pl
script.
Since bug 18260, biblio is a Koha::Biblio and calling a non-existent
method will raise an error.
This patch get rid of the following error:
batch_record_modification.pl: Template process failed: undef error - The
method itemnumbers is not covered by tests!
Test plan:
Modify bibliographic records with the "Batch record modification" tool.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 7673 introduced SubfieldsToAllowForRestrictedEditing but bug 12176
broke it assuming that only selects were impacted by this feature.
Test plan:
Go back on bug 7673 and confirm that
SubfieldsToAllowForRestrictedEditing is working as expected with this
patch applied.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
For clarification, the item fields that are entered in
SubfieldsToAllowForRestrictedEditing should EXCLUDE the desired
fields you want to disable.
Test plan (updated to test the scenario in the bug Description):
1. Create a patron with only the following permissions:
- catalogue (Required for staff login)
- editcatalogue -> edit_catalogue
- editcatalogue -> edit_items
- editcatalogue -> edit_items_restricted
2. Navigate to Administration -> Global system preferences -> Cataloging
-> Record Structure -> SubfieldsToAllowForRestrictedEditing
3. In the input field for SubfieldsToAllowForRestrictedEditing enter in
all the 952 fields EXCEPT the ones desired to be disabled. In this
case, we want to disallow editing of 952$2, 952$a, 952$b, 952$e, 952$h,
and 952$o so we enter the following into the
SubfieldsToAllowForRestrictedEditing (without quotes) "952$0 952$1
952$3 952$4 952$5 952$7 952$8 952$c 952$d 952$f 952$g 952$i 952$j
952$p 952$t 952$u 952$v 952$w 952$x 952$y 952$z"
4. Click Save all Cataloging preferences
5. Login to the staff client as the created restricted editing patron
6. Edit an item
7. Note that all fields except for the ones excluded from the syspref
are editable
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/tools/csv-profiles.pl?op=add_form
2. Add a text in the field Profile name, Profile description
and Profile MARC fields that contains js
3. Save the page.
4. Notice js is execute
5. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Prevent software error
Template process failed: undef error - text: filter not found at
/home/vagrant/kohaclone/C4/Templates.pm line 121.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
- Add a framework with script in the description
- Access the Keywords to MARC mapping page
- Add an item search field where both name and label are script
- Try to edit/delete the added mapping
With the patch no script should be executed and everything
should still work ok.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/biblio_framework.pl?op=add_form
2. Add a text in the field Description that contains js
3. Save the page.
4. Notice js is execute
5. Click on Actions -> MARC structure
6. Apply patch and reload, the js is escaped
Fixed for both the pages biblio_framework.pl and marctagstructure.pl
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/fieldmapping.pl
2. Add a text in the field Field name that contains js
3. Save the page.
4. Notice js is execute
5. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/authtypes.pl?op=add_form
2. Add a text in the field Description that contains js
3. Save the page.
4. Notice js is execute
5. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixed for both Classification sources & Classification filing rules
To Test
1. first case classification source: Hit the page
/cgi-bin/koha/admin/classsources.pl?op=add_source
second case classification filing rules:
Hit the page /cgi-bin/koha/admin/classsources.pl?op=add_sort_rule
2. Add a text in the field Description that contains js
3. Save the page.
4. Notice js is execute
5. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/items_search_fields.pl
2. Add a text in the field Name and Label that contains js
3. Save the page.
4. Notice js is execute
5. Apply patch and reload, the js is escaped
Fixed for new and edit page
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/oai_sets.pl
2. Click on New set
3. Add a text in the field setSpec, setName that contains js
4. Save the page.
5. Notice js is execute
6. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To Test
1. Hit the page /cgi-bin/koha/admin/matching-rules.pl
2. Click on new record matching rule
3. Add a text in the field Description that contain js.
4. Save the page.
5. Notice js is execute
6. Apply patch and reload, the js is escaped
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
