Introduce the new preference and remove dontmerge.
If dontmerge was enabled, the new pref will be set to zero and we will
print a message about raising this value now.
Test plan:
Run the database revision or a new install.
In case of an upgrade, check the new pref value. Should be 0 when
dontmerge was enabled, otherwise 50.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Also tested sysprefs.sql on a new database.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17960 replaces opac_news.new with opac_news.content, we can replace
the content of the notices' templates automatically.
Test plan:
Checkout a commit prior to bug 17960. Install a new DB with sample data.
You should have notices with <<opac_news.new>>
Switch to a branch with this patch, on top of master
Execute the updatedatabase.pl sript
=> The notices with opac_news.new should have been replaced with
opac_news.content
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As Katrin noted on the report, we should not limit the db rev message to
the serial claims only. Applies to acquisision claims too.
Note: Strictly speaking, we could also mention the new ACQORDER notice,
but this will not yet be widely used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Updating to 16.12.00.22 puts the upgrade process in an endless loop because DBversione is not set by updatedatabase.pl
Missing line: SetVersion( $DBversion )
This patch inserts the line as appropriate.
To test:
- Apply patch
- Verify code change makes sense
- Verify that upgrade smoothly runs through
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See BZ, comment 6, requested by QA.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
20/02/17 : added the syspref RenewalLog
24/20/17 : added a test for the syspref Renewal Log
test plan
1 - Chose a Borrower and have him renewing an item
2 - Check the renew logs : they should be empty
3 - Apply patch and set the syspref RenewalLog to 1
4 - Have the Borrower renewing a new item
5 - Check the renew logs : there should be your renew
I called the function logaction, which is in charge of modifying the
logs, within the function which adds a new renewal at the list.
Signed-off-by: Julien Comte <julien.comte@u-psud.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a QA follow-up to fix several issues:
- 1 call to GetReserveFee was wrong in ModReserveFill
- Update DB entry was wrong and insufficient
- Add robustness to the tests in sco-main
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new 'any_time_is_collected' option to the HoldFeeMode
syspref.
The existing 'always' option is renamed with 'any_time_is_placed''
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The DB field issues.return has never really been used apparently.
I found the first occurrence of this field in
commit eac3a7b19a
CommitDate: Mon Mar 12 22:43:47 2001 +0000
Database definition file, checked into cvs to make keeping database
current easier
Since I did not find any use of this field.
I guess it can be removed safely.
There is no proper test plan here. Just make sure this field has never
been used.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
I have not found any use of issues.return or old_issues.return. In
all my live instances the column is always NULL. Issuing and returning
seems to work as expected after the columns have been removed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds ExportRemoveFields to sysprefs.sql
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is the Koha part of the Hea v2 project.
You can find the (testing) code for the server at
hea-ws - https://github.com/joubu/hea-ws/commits/v2
hea-app - https://github.com/joubu/hea-app/commits/v2
They contain the different pull requests made over the last 6 months.
More information on Hea at https://wiki.koha-community.org/wiki/KohaUsageStat_RFC
The goal of this commit message is to provide an overview of what could
be a new version of Hea.
Prior to these changes, the Hea database was filled with 1 line per Koha
installation. System preferences were filled by the libraries and a
cronjob (share_usage_with_koha_community.pl) collected these values to send
them to a webservice (hea-ws/upload.pl).
With the need to collect more data we would want to collect data at the library
level (branch) and not at the installation level.
For instance the geolocation, the url or the country can be different from one
library to another, even if managed from the same Koha installation.
The Hea DB has been upgraded to reflect that change (see hea-app/sql/schema.sql).
The hidden goal of this patch is to make Hea sexier and explain
better to libraries how it can be useful to share their information
with the Koha community. I guess the main problem is the lack of
communication and explanations about what we are doing we these data.
To fill this gap I'd like to (TODO)
1. Communicate on the ML about this new version of Hea (once it got
pushed and backported)
2. Link the Privacy_Policy.md from the Hea interface
3. Get help from a native English speaker to add
popup/help/info/whatever on "Home › Administration › Usage statistics",
to clearly explain what happens (and what will not happen!) when an option or
another is set.
You can find screenshot of this whole enhancement on bug 18066, comment 2.
What this patch does:
- Create a new branches.geolocation DB field
- Add 3 new sysprefs:
* UsageStatsGeolocation
* UsageStatsLibrariesInfo
* UsageStatsPublicID
- Integrate the Leaflet JS library to get a fancy map to pick
geolocations
How does it works:
On the new administration page where statistics to share are configured,
there are several new things. It is now possible to share information either
per Koha installation or libraries. If UsageStatsLibrariesInfo is set,
the info at library level (url, name, country, geolocation) will be
sent to the Hea webservice. If it is not set, you can decide to fill
UsageStatsLibraryUrl, UsageStatsLibraryName, UsageStatsCountry,
UsageStatsGeolocation to share these information. Note that even if the
data are retrieved at installation level, it's better to fill the prefs
as well: On the Hea website the different libraries defined for a given
Koha installation could be displayed on the same page.
This page is a public page which will be attributed to every
installation (with the pref UsageStatsPublicID). On this page all the
info available publicly will be displayed.
TODO later:
- Add a button on the administration page to delete the info shared
publicly. It will be easy to show that the info are no longer displayed
on the public page.
- Add an icon per Koha installation to get a better "public page"
- Any suggestions?
Test plan:
We will need to test hea-ws, hea-app and the Koha-side code to test the
whole enhancement.
1/ To start, clone the hea-ws and hea-app project and checkout the
'master' branch (*not* 'v2')
2/ Create the hea database and user
CREATE DATABASE hea
CREATE USER 'hea'@'localhost' IDENTIFIED BY 'hea';
GRANT ALL PRIVILEGES ON hea.* TO 'hea'@'localhost';
FLUSH PRIVILEGES;
3/ Fill the DB with some data
mysql hea < hea-app/sql/schema.sql
mysql hea < hea-app/sql/sql/mock-data.sql
4/ Checkout the 'v2' branch for both hea-ws and hea-app
5/ Execute the upgrade DB script
% cd hea-app
% perl -p -i -e 's/REPLACE_ME/hea/' sql/upgrade.pl # Fill the DB info
% perl sql/upgrade.pl
Now the DB is using the v2 structure. That means we have 1 installation
row per library previously defined. 1 library row has also been created.
5/ Configure hea-ws
% echo '192.168.50.1 hea.koha-community.org' >> /etc/hosts
<VirtualHost *:80>
DocumentRoot "/path/to/hea-ws"
ServerName "hea.koha-community.org"
<Directory "/">
Options +ExecCGI
Require all granted
AddHandler cgi-script .pl
</Directory>
</VirtualHost>
And enable it with a2ensite, then restart apache.
The copy the database.yml.sample to database.yml and edit it to fill the
DB info.
6/ Launch the hea-app
% cd hea-app
% edit README.md # to install the missing modules
% cp environments/config.yml environments/development.yml
% edit environments/development.yml # to fill the DB info
% perl bin/app.pl
Then hit localhost:3000
You should see a local version of Hea with sample data
7/ Back to Koha side
A. We will test that the webservice still works with previous version of Koha (without v2)
a. Do not configure Hea
% perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
Then hit localhost:3000
=> Nothing added
b. Configure Hea on admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> New library added
c. Modify the Hea configuration
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Info are modified
B. Not we will test that it works with the new version (much more fun ;))
% git checkout hea-v2 # koha
a. Configure Hea using /admin/usage_statistics.pl
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
=> Check the result on localhost:3000
b. Share libraries's info
perl misc/cronjobs/share_usage_with_koha_community.pl -f -v
c. Continue to play a bit and share the info.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Tests are now in t/db_dependent/Search/History.t
- There were 2 differents sysprefs in sysprefs.sql and in atomicupdate => fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Added a syspref LoadHistory addSearchHistoryToTheFirstLoggedUser to select if you want the system to add the history of searches performed without session when you log in as registered user.
TEST PLAN
1 - Search in the catalogue, check you are not logged
2 - Log in : your last history should appear
4 - Log out
5 - Apply the patch
6 - Repeat 1 and 2
7 - Desactivate the syspref addSearchHistoryToTheFirstLoggedUser
8 - Repeat 1 and 2 : your last history shouldn't appear
The Unit test doesn't rollback but delete the added lines : the function get_template_and_user allway sets the autocommit to 1.
https://bugs.koha-community.org/show_bug.cgi?id=8010
Tested 3 patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* removed Policy:
* put the syspref in alpha order with the others
* added els to the if.
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Add more than one library, at least two in total is needed. Make note
of which is your current user's home branch.
2) Go to Tools -> News and add one global ("All") news item and one
specific for each branch.
3) Apply the patches.
4) Perform database upgrades when you log in.
5) Go to OPAC main, it should work as before: Showing global news as
well as the news for your home branch once logged in.
6) Go to System Preferences -> OPAC and set 'OPACNewsBranchSelect' to
yes.
7) Go to OPAC main, you should see the global news item plus any items
for your home branch for the current user if logged in.
8) Above the news, you will see a dropdown that lists the branches.
Select one, and click "Change library."
9) You should now see global news and the news for the selected branch,
regardless of whether logged in or not.
Sponsored-By: Halland County Library
Fixes QA comments:
* Keep the current selected branch selected
* Change OPACNewsBranchSelect -> OPACNewsLibrarySelect
* fix 'system wide only' view for logged in user. We still show system
wide even when a library is selected.
* Removed the "change library" link
* Added a label to the field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The loading of file admin/searchengine/elasticsearch/mappings.yaml
specifies 'type' as empty, which fails with Mysql 5.7+ which is more
stringent.
Also, forcing an empty value into a boolean also fails.
Both issues arise when updatedatabase.pl hit 3.23.00.050.
NOTE: both issues could also be resolved by actually setting values in
the load file. This doesn't make this solution incorrect, though.
To Test/reproduce:
-1) Happens with Mysql 5.7.4. Maybe earlier, but certainly at
that point. Use a Xenial kohadevbox to more easily test.
0) Find a database on 3.22 or earlier, save it.
a) place
sql_mode=IGNORE_SPACE,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
into the [mysqld] section of /etc/mysql/mysql.conf.d/mysqld.cnf
b) restart you mysql server
c) drop the db and recreate it
d) checkout the 3.22.x branch
e) do a web install
f) remove the added sql_mode
g) restart the mysql server
1) Set your code base to master
2) run updatedatabase.pl
3) See the errors on 3.23.00.050
4) Apply the patch
5) Reload the 3.22 db.
a) repeat steps 0(a)-0(g)
b) don't forget the caching issues
6) succeed with updatedatabase.pl
7) drop the db and recreate it
8) run the web installer
9) notice no issues either.
10) run koha qa test tools
NOTE: This bug only solved the upgrade portion.
I added the kohastructure.sql change as well.
I confirmed that all the code changes were
triggered with this test plan.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mehdi Hamidi <mehdi.hamidi@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This features would add the ability to create clubs which patrons may be
enrolled in. It would be particularly useful for tracking summer reading
programs, book clubs and other such clubs.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Ensure your staff user has the new 'Patron clubs' permissions
4) Under the tools menu, click the "Patron clubs" link
5) Create a new club template
* Here you can add fields that can be filled out at the time
a new club is created based on the template, or a new enrollment
is created for a given club based on the template.
6) Create a new club based on that template
7) Attempt to enroll a patron in that club
8) Create a club with email required set
9) Attempt to enroll a patron without an email address in that club
10) Create a club that is enrollable from the OPAC
11) Attempt to enroll a patron in that club
12) Attempt to cancel a club enrollment from the OPAC
13) Attempt to cancel a club enrollment from the staff interface
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
If set to true, Opac will integrate OverDrive patron services
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Using the upstream module for all the heavy lifting
* opac/external/overdrive/auth.pl - 3-legged authentication handler
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the ability to define patron categories not affected by
the behavior of OPACHoldsIfAvailableAtPickup.
The new pref OPACHoldsIfAvailableAtPickupExceptions get a list of patron
categories (separated by pipes |).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14753
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The goal of this development is to automatically generate items in Koha with
populated information based on a 9XX field and subfield, with the new syspref
MarcItemFieldsToOrder.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
