Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The fails in the previous test showed that we need the first three
changes here. Some final polishing in points 4 to 6.
[1] Sub merge: Refine the condition for initializing $tags_new.
A postponed 'modify'-merge (A to B) makes that $authtypefrom is not
defined when running merge later. When crossing the type boundary, we
need a new field too.
[2] Sub merge: Add condition for an empty @record_to array.
This indicates also that a field should be removed, since we should
otherwise only add a $9 subfield.
[3] Sub merge: Adjust initializing @record_from.
This change is tested by verifying a cleared subfield in the test.
[4] DelAuthority: Adding a skipmerge parameter to allow the call from
authorities/merge.pl to skip an unneeded merge.
This also prevents that the 'delete-merge' would precede the
'modify-merge' under a hypothetical race condition.
[5] DelAuthority: There is actually no need to call GetAuthority.
The subfields of the old record are not relevant in this case.
[6] Added a few POD lines to merge.
[7] Removed a trailing space in a comment line in merge.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t.
The last subtest should no longer fail now.
[2] See test plan of next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] The preference was sent to HEA. We can now send both AuthorityMergeMode
as well as AuthorityMergeLimit.
[2] A comment in authorities/merge.pl is removed. Note that a subsequent
patch will modify and test the cron job.
[3] Script misc/batchRebuildItemsTables.pl temporarily enabled dontmerge.
This is equivalent to setting the mergelimit to zero.
The function defnonull is no longer needed. (If the pref was NULL,
we restore that value. Sub merge won't mind.)
Test plan:
[1] Run t/db_dependent/UsageStats.t
[2] Run misc/batchRebuildItemsTables.pl -t
This just ensures you it still compiles; the changes speak for itself.
[3] Now git grep on dontmerge.
You should only find hits in atomicupdate and misc/translator/po.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We will need a few additional parameters for merge later on. This patch
puts the original parameters in a parameter hash.
For the same reason DelAuthority gets a parameter hash here.
Note: We remove the second parameter from the DelAuthority call in
authorities/authorities-home.pl here. It was not used and could have
presented problems in the future.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t.
[2] Run t/db_dependent/Authorities/Merge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Good catch from Jonathan. See comment11.
Authorities detail should pass a CSRF token to authorities-home when
deleting a record without linked biblios.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Passing the token with GET is not a good way to do, but nothing quick to
replace that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Without this patch, it is possible to delete authority records with URL
manipulation.
Like: /cgi-bin/koha/authorities/authorities-home.pl?op=delete&authid=[XXX]
Test plan:
[1] Go to Authorities. Search for some authorities (without links).
[2] Delete an authority. Should work.
[3] Apply patch.
[4] Construct an URL like above to delete another authority. Should fail.
Under Plack this results in an internal server error, the log tells
you: Wrong CSRF token.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Amended the test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original patch from Remi Mayrand-Provencher.
Amended by Marcel de Rooy (January 2017), part of omnibus bug 17908.
EDIT:
We cannot remove the ModAuthority call, since the reference record is
the result of the merge and should be saved.
Variable $overwrite is not used and can be removed.
It is not useful to postpone a merge to the cron job here, since the
old authority record is deleted. (Note that bug 9988 will address this
subject too.)
Removing the call to C4::ImportBatch::SetImportRecordStatus: Since
$recordid2 is not an import_record_id, this is useless and potentially wrong.
Removed the if statement for @errors, since it is not used at this point;
putting the result of a comparison into $error is not useful either.
Note: there is a lot of code in merge.pl around breeding that is actually
unused. Template tools/manage-marc-import.tt contains two unused blocks
final_match_link and match_link that contain a (unreachable) call to
authorities/merge.pl with parameters:
mergereference=breeding&authid=[% record_lis.match_id %]&authid=[% record_lis.import_record_id %]
It seems that this would show the records correctly, but would not merge
them correctly since that code expects two authority records.
Leaving the signoff of Mehdi since he essentially tested the merge call.
Test plan:
[1] Restart Plack and restart koha-indexer. (I had some problems related to
indexing as a result of the marcxml transition.)
[2] Go to Authorities.
Select two authorities to merge, start with two of the same type.
Make sure that both are used in a few biblio records.
Select at least one subfield from the authority to be removed for
inclusion in the authority to be kept ("reference record").
[3] Click Merge. You come back to the kept authority record.
Note: The number of attached records may not yet be updated. This depends
on the speed of koha-indexer. If you wait a bit and refresh, you should
have the correct number.
First check the authority record again for the inserted subfield.
Now check a biblio that was ALREADY attached to the reference record.
And check a biblio that was FORMERLY attached to the deleted one.
Note: See bug 17913 to see how pref AuthorityMergeMode impacts this.
[4] Try steps 2 and 3 again for a merge of two authority records that do not
have the same authority type noting the remarks below.
For instance try to merge from a CORPO_NAME to a PERSO_NAME record.
Make a change in say 040$a of the record to be deleted. And select that
field later on the merge form.
Normally, you would use the PERSO_NAME framework in the merge now.
When checking the authority record, look at 040a. When checking the
record that was linked to the CORPO_NAME, check if it contains the
PERSO_NAME authority in the correct field (say 100, 600, 700).
Signed-off-by: mehdi <mehdi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested merging PERSO_NAME to PERSO_NAME and PERSO_NAME to CORPO_NAME.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes made on bug 15381 assumed that the authid was always set.
But if the user wants to clear the field of the authority, the script is
called with authid=0 (FIXME...)
To fix this issue, it's better to move the new calls to
Koha::Authorities->find($authid)->authtypecode
and
Koha::Authority::Types->find($authtypecode);
at the correct place
Test plan:
1. Edit a record which has a field linked to an
authority record (100a for instance).
2. Click the link which triggers the tag editor.
A pop-up window should be displayed.
3. In the pop-up window, click the "Clear field"
button.
=> Without this patch A second pop-up window opens and displays an error:
Can't call method "authtypecode" on an undefined value at /authorities/blinddetail-biblio-search.pl line 61.
=> With this patch applied the field is correctly cleared.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the intranet, the pagination has been broken by bug 12478 (Elastic
Search). There was a confusion between the offset and the page number.
At the OPAC, it is broken since bug 2735 which has mimicked the intranet
script.
Test plan:
Search for a term which will return more than 1 page of results.
Click on the second page
=> Without this patch, the first result of the second page is the second
result of the first page
=> With this patch applied, the offset will be corrected
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This allows sorting to be configured within a field. For example, while
many values are included for search on author, sorting should only be
done on the main entry values. This permits that by have a sort value,
which can be true, false, or null. true and null are pretty much the
same, but false means that a field isn't available for sorting on. By
default (null), fields can be sorted on.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some issues with sort order though.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The commit b5ecefd485
Date: Mon Feb 3 18:46:00 2003 +0000
had a funny description:
Added function to check if a MARC subfield name is "koha-internal"
(instead of checking it for 'lib' and 'tag' everywhere); temporarily
added to Koha.pm
"Temporarily", since 2003, everything is relative, isn't it? :)
The thing is that GetMarcStructure returns hash like
field_200 => {
subfield_a => {
%attributes_of_subfield_a
},
%attributes_of_field_200
}
The attributes for field_200 can be 'repeatable', 'mandatory', 'tag', 'lib'.
We don't want to loop on these values when looping on subfields.
Since there are just { k => v } with v is a scalar (string), it's easier
to test if we are processing a subfield testing the reference.
At some places, we don't need to test that, we are looping on values
from MARC::Field->subfields which are always valid subfields.
Test plan:
1/ Edit items using the batch item mod tool
2/ display and edit items via the cataloguing module.
You should not see any changes between before and after the patch
applied.
Tech notes:
We need to check what we are processing when we loop on 'subfields' from
GetMarcStructure, not from MARC::Field->subfields.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 8064 (Merge several biblio records) change some code used in both
biblios and authorities merge tool without updating the authorities
merge tool.
This patch fixes that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Test this patch with the previous one.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
These 2 subroutines are now not necessary anymore, we can use
Koha::Authority::Types to retrieve the authority types.
This patch won't be easy to test. Indeed, a lot of file are updated.
To test it I would suggest to focus on the merge authority
You should also confirm that the authtypecode and the authtypetext
values are correctly displayed when navigating in the authority module.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The existing Koha::Authority does not use Koha::Objects and does not
exclusively deal with DB objects.
It makes much sense to move it to let the space free for a
Koha::Authority and Koha::Authorities modules based on Koha::Object.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch does the following:
[1] Adjust authorities_merge_ajax just as in bug 14588.
[2] Replace some indirect syntax for fetch GGI::Cookie.
[3] Along the way replace some new CGI's. Note that I am not aiming to
replace them Koha wide. The "fetch class" variant is less readable.
NOTE: The changes to tools/upload-file.pl and upload-file-progress.pl
are moved to report 14321.
Test plan:
[1] Run the URL authorities/merge_ajax.pl in staff.
[2] Upload a file with Stage MARC records for import.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
[1] It runs, but also before patch
[2] File uploads without problem
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We could certainly remove 1 or 2 call to CGI->new in tools/background-job-progress.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch swaps the authority records according to the refenrece record selection.
To TEST:
Merge two authority records, select the second as merge reference.
The reference authority is always the first.
Apply the patch.
Repeat previous steps, the authority is now merged using the selected reference record.
modified: authorities/merge.pl
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The text for the marc field are truncated to 22 chars when displaying an
error on mandatory fields.
This limitation is useless and this patch removes it.
Test plan:
Create a mandatory subfield and set a long text (more than 22 chars)
edit or add an authority, click on save.
You should get the error displayed with the full text
Note that this patch modifies the same code for biblio.
Test plan is the same for biblio.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the use of Koha::FrameworkPlugin in Cataloguing,
Authorities, Acquisition, Serials and Tools.
The main change is architectural: see the commit message of the previous
patch. No changes in behavior are expected, but the support of new events
may provide additional functionality in the future. Some small bugs are
resolved along the way.
The change primarily focuses on the MARC and items editor in Cataloguing.
But the MARC editor for Authorities and the item editor in Acquisition,
Serials and Tools are touched too. This commit message gives some comments
per module.
NOTE FOR CATALOGUING:
A new plugin without popup (or other click event code) now shows the title
No popup when hovering over the tag editor image. The image alerts the
user on a plugin, the title tells about its status. The noclick property
allows for further style modifications in the template. Note that a
follow-up patch will clean up the old style plugins too with the same
effect.
Some additional code in cataloging.js makes it possible to clone subfields
with plugins (although only theoretically useful). The clones use the
same javascript functions but event.data contains an updated id.
This effectively resolves bug 13306. Note that if old plugins do not use
the javascript parameter for the id but the perl variable, cloning does
still operate on the wrong field (with and without this patch set).
In the absence of report 12176 in master, it is not yet necessary to modify
additem.tt. When it gets pushed, it should be an easy rebase.
New style item plugins will no longer need an extra parameter. (The code in
the FrameworkPlugin object actually takes care of that.)
NOTE FOR AUTHORITIES:
This patch also adds class name tag_editor to the buttonDot anchors. This
effectively makes the same tag editor image appear as in Cataloguing.
Futhermore it removes the button from the tab sequence if there is no click
event (really effective after conversion to the new style, since the old
style plugins contain empty onclicks and launchers).
Both small adjustments increase consistency between auth and bib edits.
NOTE FOR ACQUISITION:
In Acquisition two scripts use an item editor, but in a different way.
The scripts addorderiso2709 and neworderempty both rely on the routine
PrepareItemrecordDisplay in C4::Items, but neworderempty creates item
blocks dynamically via an ajax call to services/itemrecorddisplay.pl.
In order to make the dynamic item blocks work with plugins, some code
changes were needed in additem.js. (Normally the event binding is done
at document ready time; now it must be done later.)
At this moment the routine in Items.pm contains the html tags, and this
makes changes to the following templates not necessary for now:
* acqui/addorderiso2709.tt
* services/itemrecorddisplay.tt
Report 13397 has been opened to address moving the html to the templates.
NOTE FOR SERIALS:
Script serial-edit relies also on C4::Items (just as in Acquisition).
This makes changes to serials/serials-edit.tt not necessary for now.
NOTE FOR TOOLS:
The current code in tools/batchMod.pl allows the use of plugins for batch
modification of items. This patch just converts that code to use the new
object. Most item plugins however may not be very useful for operating on
multiple items at once.
PERFORMANCE:
I have benchmarked build_tabs in addbiblio to see how especially the
additional processing of the javascript in the FrameworkPlugin object
would impact performance. Testing default MARC21 framework with 8 plugins
gave the following figures:
- Old situation: 851 ms
- New situation: 942 ms (+10,7%)
- New situation after plugin cleanup: 881 ms (+3,4%)
Note also that adding lines for event binding is compensated by removing
lines for unused events. Page load should essentially be the same.
TEST PLAN:
Suggestion: If you also apply the next patch with the EXAMPLE plugin, you
can test with a rather harmless plugin (with popup) on various places :)
But your test should also include old style plugins, with[out] popups.
If you want to test a new plugin without popup, rename/remove Click$id
in the javascript code of the $builder definition (temporarily).
[1] Test Cataloguing:
- Add/Edit biblio. Try plugins with and without popup.
- Add/Edit items. (EXAMPLE can be used as an item plugin with popup.)
- Clone a subfield with plugin (use EXAMPLE): Verify that the plugin
works on both original and clone with the respective field values.
Is the value put back in the right field too?
[2] Test Authorities:
Edit an authority record. Try plugins with an without popup.
[3] Test Acquisition:
Set system preference AcqCreateItem to "placing an order".
Check the item editor in the following two places:
a- addorderiso2709: Open a basket, add an order from a staged file.
Select a file, click Add orders, and go to tab Item information.
b- neworderempty: Open a basket, add an order from a new empty record.
[4] Test Serials:
Check the item editor on serials-edit. Go to subscription detail.
Click Receive. Choose "Click to add item". (Note that this subscription
should create an item record when receiving this serial.)
[5] Test Tools:
Check the item editor for batch item modification. Enter a few valid
barcodes and press Continue to reach the item editor.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=11961
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This button lets you replace existing authorities using a Z39.50 search.
http://bugs.koha-community.org/show_bug.cgi?id=11961
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce, edit, index notice with utf-8 char and search for it
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Perl issues a warning when you try to do a numeric comparison on
non numeric values. While in 99% of the caeses numeric and string
comparison behave similarly when they dont tracking down resulting
bugs is hard. Also we dont want to be logging errors for normal
operations. replace numeric == with eq
(also switched to non-interpolating quotes so we dont generate
a warning from static code checkers like perlcritic)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I can get this warnings in log files. This patch make perfectly sense.
MARC subfield code should never be tested with Perl == operator, since
the code could be letter or a number. Perl eq operator do an implicit
string conversion for value which is a number, so it will work in any
case.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes HTML code from authorities.pl
To test:
1. Check no regressions on authority editor,
new/edit/save
2. Check new line on translation files, update
a language, look for 'Tag editor'
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked various features of the authority edtior:
- repeating subfields
- deleting subfields
- changing the order of subfields
- linking a subfield to an authorised value
- plugins
No regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just adjusts several POD stuff, and in a few cases
reorganizes a hash definition in order to use spaces instead of tabs
for the QA script to be happy.
Nothing important, really. This patch series just changes '.tmpl' for
'.tt'.
Regards
To+
PS beware that running the koha-qa.pl script can take lots of time on this one
:-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
From a biblio record, if one wants to add a 600$a information, a pop-up
appears. On this new window, on search terms typed and validated, a table
result is displayed, with a column "Get It!" allowing the selection of an
authority. From here, different cases:
1) If we have a simple authority with 200$a and 200$b subfields, a link
"choose" is displayed, working correctly.
2) If the authority has different occurences of 200$a/200$b, numeric links (1 2
and so on) are displayed, one for each occurence. In the example of my
screenshot, the line with a "Paul, Korky -- Pauline, Korkette" summary
possesses two links : "1" will add "Paul, Korky" whereas "2" will add
"Pauline, Korkette" (couldn't come up with a better name ;)).
3) If the authority has 200$x or 200$y subfields defined, several links are
also created, when it should not be the case. In our example, "Niclausse,
Paul -- Expositions" will create a link "1" for "Niclausse, Paul" and a link
"2" for "Expositions". Clicking on the 2nd link leads to the following
error: Software error: Can't call method "subfields" on an undefined value
at
/home/asaurat/workspace/versions/community/authorities/blinddetail-biblio-search.pl
line 86. Only the cases 1 and 2 should be handled. The creation of links
for subfields like 200$x or 200$y should be removed.
This problem is caused by the use of " -- " has separator of authorities with
several headings, but also in some heading between main part and subdivisions.
This patch corrects this by using an array in authorities summary so that
presentation is computed in template. I've choosen to use the pipe separator
between authorities with several headings. This may be changed to be
configurable.
Test plan :
- Edit an authority type summary : for example subject (heading on 250) :
summary "[250a][ -- 250x]"
- Create an authority A1 with one heading and a subdivision : for example a
subject : 250$a "History" 250$x "20th century"
- Create an authority A2 with several headings. for example a subject : 250$a
"History" 250$a "Legends"
- Rebuild Zebra queue
- Go to OPAC and click on "Authority search" and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Go to intranet autorities search and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Edit a record using this autorities type as thesaurus : for example on 606$a
- Click on thesaurus link and search on "History"
=> You will find A1 and A2 :
History -- 20th century ; 0 times ; choose ; Edit authority
History | Legends ; 0 times ; 1 2 ; Edit authority
- Click on link "2" to chosse "Legends"
=> You get "Legends" in heading field : for example 606$a
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the problem and the solution. I have tested the patch on a large
DB with authorities having multiples headings. There is no regression on bug
4838.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Without the patch I couldn't choose between multiple headings
in the authority plugin, but with the patch it works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes spaces in indicators which are imported when we link an
authority to a biblio record. The spaces made the indicators harder to edit
after the linking, because we had to delete the superfluous space character
before a new value could be entered.
To test:
1. Open some authority on editor, save with empty indicators.
They are saved as ind1=" " ind2=" " on auth_header tables, with spaces
2. Edit some record, link some tag with previous auth,
indicators now have a space on it (or ind1 at last)
3. Apply the patch
4. repeat 2, space is gone
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When merging authority records in librarian interface biblio records
linked to deleted authority are not being corrected (i.e. have still
old heading and orpaned link in $9).
Test plan:
1. Have two authorities in the catalogue, linked to biblio records.
2. Merge them with the new merge facility (cf. Bug 5202).
3. Have a look a the biblio record(s) previously linked to the removed
authority. It should still have the old heading AND orpaned authority
link in $9.
4. Apply the patch.
5. Refresh the test records (or use another set).
6. Repeat 1-3. Headings should be refreshed and the correct authid link
should be in $9 now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Note: new record count on the authority record will show
after reindexing.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In biblio (or authority) record editing or creation, Bug 3727 added
an empty value to combobox for subfields using itemtype authorized values,
which is mandatory and does not have a default value. This to avoid
selecting arbitrarily the first value of the combobox.
This patch extends this behavior to normal authorized values like CCODE,
COUNTRY ...
Also, when record already exists and has a defined value for the subfield
this value will be selected in combobox so there is no need for an empty
value.
Test plan :
- In a biblio framework, set a subfield mandatory and using itemtypes
authorised values
- Set a default value for this subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the first empty value is selected
- Go to biblio framework and set a default value for the subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the default value is selected
and there is no empty value
- Select an other value and save the record
- Edit this record
=> You see the subfield with a combobox, the saved value is selected and
there is no empty value
Perform same tests with a normal authorized values categorie (instead of
itemtypes).
Perform same tests with with authority creation/edition
Perform same tests with a normal authorized values categorie and authority
creation/edition
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Fridolyn: I had a lot of difficulty understanding your test plan,
especially since the second line should not be in the test plan
(since if there is a default value, no empty value should appear).
Perhaps it would be useful to use more whitespace to separate
steps and the things for which a tester should check.
Also, it might be useful to specify what testers should check for
before and after applying the patch, so that they're sure that the
behaviour has been corrected.
In any case, the patch works! Certainly a helpful addition.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
1) Adding a bibliographic record
Subfield is mandatory, no default value:
- adding record: no value is preselected, empty value exists
- editing record: saved value is shown, empty value exists
Subfield is mandatory, defined default value:
- adding record: default is preselected, no empty value
- editing record: saved value is shown, no empty value exists
Subfield is not mandatory, defined default value:
- adding record: default is preselected, empty value exists
- editing record: saved value is shown, emtpy value exists
Subfield is not mandatory, no default value:
- adding record: empty value is preselected
- editing record: saved value is shown, empty value exists
2) Adding an authority record
Repeating tests from above.
- Subfield is mandatory, no default value: OK
- Subfield is mandatory, defined default value: OK
- Subfield is not mandatory, defined default value: OK
- Subfield is not mandatory, no default value: OK
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Perltidy and some format changes.
Most important : call to get_template_and_user must be at begining
of script because it checks authentification.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
- Tested various searches, selections now remain after
submitting the search form.
Regression testing:
- Clearing the authority from the record still works.
- Creating a new authority from the plugin page
still works.
- Autocomplete of entries still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When cataloging a field defined with a thesaurus, an authority search
popup is displayed with a search from. Once operators, values and sort
selected in this form the search can be performed. The bug is that the
values entered are kept but not the selected operators and sort.
The same bug was existing in authorities module, solved by Bug 8692.
This patch corrects the bug.
Also uses in 'sort by' options the same text as search in authorities
module : Heading A-Z (default), Heading Z-A, None.
Also removes duplicated code in auth_finder.pl :
value_mainstr => $query->param('value_mainstr') || "", ...
Test plan :
- Create a new biblio with a framework containing a field linked to a
thesaurus. For example : 600
- Click on small icon of main entry. For example : 600$a
=> You get a search form with all operators to "contains" and sort by
"Heading A-Z"
- Enter a value in each text box and perform search
=> You get a search form with values in text boxes and all operators
to "contains"
- Select "starts with" in all operator comboboxes and perform search
=> You get a search form with all operators to "starts with"
- Select "is exactly" in all operator comboboxes and perform search
=> You get a search form with all operators to "is exactly"
- Select "Heading Z-A" in sort by and perform search
=> You get a search form with "Heading Z-A" in sort by
- Select "None" in sort by and perform search
=> You get a search form with "None" in sort by
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: With both patches applied no koha-qa errors
Test
1) Original behavior is whatever selection you do before patch,
search form returns to default options
2) After patch, selection remains
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, further comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch (which is incidental to the main patches for bug 9282),
improves the AJAX authority search code by fixing incorrect contruction
of the parameters to SearchAuthorities() that led to errors like this
in the Apache log when doing auto-completion searches on "main entry"
and "anywhere" in the authority finder:
ysearch.pl: Use of uninitialized value $i in string eq ...
In the process, this patch also removes a use of the now-deprecated
Perl smartmatch operator.
To test:
[1] Verify that the main test plan for bug 9282 still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the auto-completion on the authority record
finder (accessed from the bib editor) so that if you do
start typing in the "Main entry ($a only)" input field, it will
return only the $a of the main heading for matching authority
records.
This fixes a problem where typing "shakes", choosing
"Shakespeare, William, 1564-1616" from the auto-completion
result list, then hitting the search button fails to bring
up results, as the dates come from the $d of the 100 field
(in MARC21).
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised.
Tested with an authority where I added my search term in $b.
The modified authority came up in main entry, not in mainmainentry.
That was the desired result.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The link on the merge reference had been wrong, and framework types
were not indicated when you were merging records of two types. This
patch fixes those problems.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
$mergereference is not always defined, so we should check it is
defined before checking its value.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When rebasing the patch for this, I accidentally moved the line
setting the mergereference when merging from breeding to *before*
I checked whether we were merging from breeding. Needless to say,
this caused problems. This patch fixes that, and:
* Makes the error translatable.
* Adds a missing authtypesloop argument for the template.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
