This patch does:
[1] Some trivial template changes. Modified some comments (POD lines).
[2] Converted plugin to new style.
[3] Table updates: renames id to hashvalue, adds a autoincrement id,
adds filesize, timestamp, owner and category.
RM: This db rev is in a separate sql file in atomicupdate.
[4] Code references to computed hash renamed to hashvalue instead of id.
[5] Removed some code pertaining to exposing upload dir structure. The user
now may choose a category; the uploader takes care of storage.
The list of upload categories is now taken from authorised values; this
might become a separate table in the future. (If there are none,
the upload process creates one default fallback.)
We can add e.g. permissions later, subdir structure, etc. (So dir will
not necessarily be category anymore.)
Test plan:
[1] Run the db revision.
[2] Upload new file. Check the record in the table. Delete it again; check.
[3] Run t/db../UploadedFiles.t.
[4] Run t/db../FrameworkPlugins.t -incl cataloguing/value_builder/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Two problems were discovered while doing a fresh install
of Koha. These problems in the kohastructure.sql file are
addressed with this patch.
Clicking the plug-in icon should cause the popup window
to refocus. This adds the refocus code to the upload.pl file.
The path to the jquery.js script was wrong in the
upload_delete_file.tt file. Changed [% themelang %] to
[% interface %].
If a user clones 856$u after uploading a file, deletes the file,
and then clicks the plugin icon on the first 856$u, this will go
immediately to the upload screen with an informative error
message.
After some validation was added, it was extended to include
other cases. This serves to patch 6874 to a state where sign
off should be possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
* Renames uploadPath to upload_path to follow the standard naming
conventions in koha-conf which use underscores rather than camel case
* Remove reference to intranet-tmpl and replace with [% interface %]
required to pass qa
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
New cataloging plugin upload.pl and new system preference 'uploadPath'.
upload.pl provide a way to upload files on the server and store a link
(url) to it in MARC
uploadPath is the absolute path on the server where the files will be
stored. It's possible to have a hierarchy of directories under this path
and the plugin will allow to choose in which directory to store the
file.
Stored value in MARC subfield looks like this:
<OPACBaseURL>/cgi-bin/koha/opac-retrieve-file.pl?id=<SHA-1 of the file>
So both 'uploadPath' and 'OPACBaseURL' sysprefs have to be set for this
plugin to work correctly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended/simplified the patch during QA: The changes to
GetMarcUrls are not really needed, and would have needed some
attention. Another link text can be supplied by the plugin too.
This also reduces the need for changes in basket.pl,
MARCdetail.pl, detail.pl, opac-basket.pl and opac-detail.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Edit: more meaninfull commit subject
It would be incredibly helpful if we could easily enable Koha to dump
all Template Toolkit variables to a comment for debugging purposes.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable the new system preferences DumpTemplateVarsIntranet and
DumpTemplateVarsOpac
4) Load a page in the staff intranet, view the html source
5) Note the template toolkit variables are embedded in an html comment
6) Load a page in the opac, view the html source
7) Note the template toolkit variable are embedded in an html comment
NOTE: I had to cpan2deb Template::Plugin::Stash to test.
This is not optimal. Additionally:
http://www.template-toolkit.org/docs/modules/Template/Plugin/index.html
does not contain Stash. I suspect this was how it was
introduced initially by TT.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial correction. Only touches comments.
Test plan:
Run git grep -E "borroewr|borow". You should not find anything now.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typos in comments corrected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
- Fix QA.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New pref in right order, new option 'no' on syspref, other
fixes following comment #12
All seems to work
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows Koha OAI repository to support deleted records.
The OAI-PMH:DeletedRecord syspref is introduced and can be set to:
- persistent (in case Koha's deletedbiblio table will never be emptied
or truncated)
- transient (in case Koha's deletedbiblio table might be emptied or
truncated at some point)
Test plan:
- After applying the patch, test that:
- Deleted records appear in ListRecords and ListIdentifiers requests.
- Filter parameters (from, until, set and resumptionToken) still work
and are applied to ListRecords and ListIdentifiers requests.
- Identify request shows if the repository is considered persistent
or transient, according to the OAI-PMH:DeletedRecord syspref.
- Deleted records that used to belong to a set are still displayed in
those sets and marked as deleted.
- GetRecord requests work on deleted records, which are marked as deleted.
Requests examples:
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&from=2015-02-20T11:08:33Z
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=oai_dc&set=new_specSet1
/cgi-bin/koha/oai.pl?verb=GetRecord&identifier=KOHA-OAI-TEST:2&metadataPrefix=oai_dc
/cgi-bin/koha/oai.pl?verb=Identify
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works in all situations described in the test plan. Great addition.
Thanks.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
While testing bug 9006, I discovered this gem in
installer/install.pl
TEST PLAN
---------
1) back up DB
2) drop db and create db
3) git reset --hard origin/3.20.x
4) run web installer and all sample data
5) git reset --hard origin/master
6) empty your koha intranet error log
7) run web installer to upgrade
-- there will be warnings regarding regex around
installer/install.pl line 328 or so.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
8) repeat steps 2-6
9) apply this patch
10) run web installer to upgrade
-- no regex warnings.
grep "\$kohaversion" ~/koha-dev/var/logs/koha-error_log
11) koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch updates the 2 optional sample_notices.sql files for ru-RU and
uk-UA.
Not sure if it is relevant but I don't understand why they are not
up-to-date.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked by running them manually.
English installs 27, Russian 27 and Ukrainian 26.
Last language can be updated somewhere else.
This patch adds the new notice for all other languages.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch add the new notice suggestion > TO_PROCESS
Others will be added when the patch will be signed off.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Followup expected :-) It would be nice also to have an updatabase.pl entry to
insert the new TO_PROCESS notification.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Addresses Katrin's comments in comment# 56
TEST PLAN
---------
1) Back up your DB
2) Ensure you have multiple languages, including
some that have sub-languages (e.g. de-DE, de-CH)
-- cd misc/translator
-- perl translate install {language code}
3) Ensure that you have all the languages enabled
-- Staff client -> Home -> Global system preferences
--> I18N/L10N
Check all the languages in opaclanguages.
Ensure that opaclanguagesdisplay is 'Allow'
4) Open OPAC
-- should only have languages in footer.
Annoyingly below the fold.
5) Drop your koha database, and create a blank one.
6) Apply all patches
7) Reinstall all the known languages, so the templates
are appropriately updated.
8) Go to staff client and do an install of koha, with
all the dummy data.
9) Ensure you have all the languages enabled (see (3))
10) Refresh your OPAC page
-- language selector position should be in both
the footer and at the top as expected.
-- this confirms the sysprefs.sql change.
11) Restore your DB
12) run the updatedatabase.pl script
13) Ensure you have all the languages enabled (see (3))
14) Refresh the OPAC page
-- should still only have languages in the footer.
-- this confirms that upgrade won't change anything.
-- this confirms the atomic update.
15) git diff origin/master
-- the opac-bottom.inc difference should only
have changes around a SET, IF, and END.
This confirms the noprint was fixed.
16) In the staff client, change the OPAC system preference,
OpacLangSelectorMode, to all three values.
For each value, refresh the OPAC page, and confirm the
position of the language selector.
-- should work as expected.
17) run koha qa test tools
NOTE: Tested as a single batch together.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
0) Back up your DB
1) open OPAC
-- should only have languages in footer.
Annoyingly below the fold.
2) Drop your koha database, and create a blank one.
3) Apply all patches
4) Go to staff client and do an install of koha, with
all the dummy data.
5) Once installed, refresh your OPAC page
-- language selector position should be in footer
still as expected.
-- this confirms the sysprefs.sql change.
6) Restore your DB
7) run the updatedatabase.pl script
8) Refresh the OPAC page
-- should still only have languages in the footer.
-- this confirms that upgrade won't change anything.
-- this confirms the atomic update.
9) git diff origin/master
-- the opac-bottom.inc difference should only
have changes around a SET, IF, and END.
This confirms the noprint was fixed.
10) In the staff client, change the OPAC system preference,
OpacLangSelectorMode, to all three values.
For each value, refresh the OPAC page, and confirm the
position of the language selector.
-- should work as expected.
11) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on Mark's inputs in comment #40 -
[1] selected 'mast' (short of 'masthead') and updated :
(a) bug_14252-OpacLangSelectorMode_syspref.sql
(b) sysprefs.sql
(c) opac.pref
[2] Reduced the calls to Koha.Preference() from :
(a) masthead.inc
(b) opac-bottom.inc
After applying this patch, update the database once for it to pick
up the new option values -'both|mast|foot'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on discussion, this followup does the following:
1/ brings back the switcher on opac-bottom.inc
2/ adds a syspref OpacLangSelectorMode to toggle between the three
modes:
(a) show switcher both on masthead and footer (default)
(b) footer only
(b) masthead only
Test plan
=========
1/ apply earlier patches attached to this bug in their correct order
2/ apply this followup patch
3/ run updatedatabase.pl to add in the atomic update
4/ goto admin/preferences.pl?tab=opac
5/ look up OpacLangSelectorMode, it should be set with default value
"both masthead and footer"
6/ check OPAC to see if both locations show the selectors
7/ change OpacLangSelectorMode to 'only header' and 'only footer' at
each iteration, and check if the selection has correctly toggled
the selectors. It should
Note: make sure you do not have the patch 11057 applied on the branch
from before, otherwise merge conflict might happen.
http://bugs.koha-community.org/show_bug.cgi?id=14252
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since message_id is not linked to anything else in the database, we
can ensure the message_id's are unique by simply dropping the column
and recreating it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Making message_queue work nicely with DBIx.
DROP the existing KEY and replace with an PRIMARY KEY.
If somebody has managed to get duplicate message_ids in his/her
message_queue-table, this patch takes care of them as well, but givin
all duplicate message_id's a new id.
TEST INSTRUCTIONS: in the patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Amended patch: Remove change to Koha/Schema/Result/MessageQueue.pm, will
be done by the RM
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Improves formatting and wording as suggested by
Nicole on bug 14249.
To test:
- Activate UseDischarge
- Request a discharge from a patron account in the OPAC
- Confirm discharge from the start page of the staff
interface
- Download PDF from the patron account in the OPAC
- Verify the displayed text is formatted and reads
correctly
06/06/2015 15:18
Discharge confirmation
Midway certifies that the following borrower:
Firstname surname (cardnumber: 1)
has returned all items.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Messages is Ok, no errors
I think you cant modify message using embeded CSS,
html -> pdf procedure ignores CSS.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) backup db
2) git checkout -b my_3.6.x origin/3.6.x
3) drop db and create blank one
4) git reset --hard origin/3.6.x
5) run web installer
6) set HomeorHoldingBranchReturn system preference to 'holdingbranch'.
7) create a Default checkout, hold rule
home -> koha administration -> Circulation and fines rules
-- I put 10 checkouts total and clicked 'Save'
-- there currently is not 'returnbranch' in default_circ_rules.
8) git reset --hard origin/3.20.x
-- or whatever version you apply this to
(3.8.x, 3.10.x, 3.14.x, 3.16.x, 3.18.x, or 3.20.x
-- 3.21.00.008 deletes the systempreference involved)
9) ./installer/data/mysql/updatedatabase.pl
10) check HomeorHoldingBranchReturn systempreference
-- Currently says 'holdingbranch', but
the value of 'returnbranch' in default_circ_rules is
'homebranch'.
11) repeat steps 3-8
12) apply this patch
13) repeat steps 9-10
-- Currently says 'holdingbranch', and
the value of 'returnbranch' in default_circ_rules is
'holdingbranch'.
14) run koha qa test tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 3.6.x install, updated to 3.8.x
Value is preserved
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Note: I haven't followed the test plan, but the fix is trivial.
Maybe it could worth to upate 3.21.00.008 and check the value of
HomeOrHoldingBranchReturn before deleting it.
We could raise a warning if HomeOrHoldingBranchReturn ==
'holdingbranch'.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Removes the Smithsonian as a target installed with the
sample data during installation.
Also adds the newer LOC authority targets to files where
they were missing.
To test:
- Verify the Smithsonian has been removed from all
translated installers
- Verify the files are still valid SQL and install
correctly
NOTE: There was tiny scope creep which included ensuring
there were two Authority z39.50 servers as well.
Text files properly reflect the removal.
SQL 'source' of SQL files worked properly.
Was able to Z39.50 search for all of the 'en'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Added Atomic Update to fix poorly transferred orders
TEST PLAN
---------
8) Apply patch (2)
9) Run the database updates
$ ./installer/data/mysql/updatedatabase.pl
-- This should run without error
10) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- This should fail, because the transfer function is still
not fixed.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Reported by Jonathan on bug 11401:
DROP TABLE IF EXISTS borrower_sync;
is missing in installer/data/mysql/kohastructure.sql
To test:
- Run the web installer and confirm all tables are
created correctly
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Fix updatedatabase, moving the update entry into the right spot
- Fix some tabs
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Acquisition db tables are missing some indexes to have
performance queries.
This patch adds an index on some columns very often
used in search queries, such as aqbooksellers.name and
aqbudgets.budget_code.
Also adds an index on aqorders.orderstatus, very often used
with hardcoded value like 'cancelled', in various queries.
Test plan :
1) Back up database
2) $ git reset --hard origin/master
3) $ git bz apply 14053
4) In your mysql client
> DROP DATABASE koha_library;
> CREATE DATABASE koha_library;
> QUIT;
-- Obviously you may need to vary koha_library :)
5) Navigate to staff client
-- should be able to set up the DB just fine.
-- this will catch the comma bug that keeps coming in.
6) $ git reset --hard origin/master
7) Repeat step 4
8) Navigate to staff client
-- nothing tested, but we need the DB set up.
9) $ ./installer/data/mysql/updatedatabase.pl
-- atomic updates run without issue.
10) run koha qa test tools
11) Restore DB
12) Try to compare performance after and before
database update. I think query contained in
C4::Acquistion::GetInvoices could be a good example
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrowers.flags values need to be updated to prevent side effects.
Test plan:
Set the borrow permission flags for some borrowers
Execute the updatedb entry and verify the flags has been updated (-128)
only for borrowers with this permission set.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Moved updatedatabase entry (was in wrong position) to atomicupdate
with commented copy of orignal
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets adds the possibility to log new, update and delete actions for saved reports.
To test:
-Apply patch
-Run updatedatabase.pl
-Enable system preference ReportsLog
-Create, duplicate, edit and delete saved reports
-Go to Home > Tools > Logs
-Verify that you can select "Reports" in Modules list
-Verify that your actions were logged
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames translation files for Bengali
language, from ben-* to bn-IN-*.
Also adds India as region
To test:
1) Apply the patch
2) Run updatedatabase
3) Install Bengali language
cd misc/translator
perl translate install bn-IN
enable
Check correct description
4) Create and install a fake Bengali variant
cd misc/translator
perl translate create bn-XX
perl translate install bn-XX
enable both variants
Check correct rendering of region
Results comply with expected test plan outcome. Signed off for bn-IN
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
