This patch prevents bypassing the self check timeout with the print dialog.
To test:
- Set syspref 'WebVasedSelfCheck' to 'Enable'
- Set syspref 'SelfCheckoutReceivePrompt' to 'Show'
- Set syspref 'SelfCheckTimeout' to 20 seconds
- Apply patch
- Go to SCO page (/cgi-bin/koha/sco/sco-main.pl)
- Enter card number
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Confirm printing without waiting 20 seconds
=> Result: Print slip, SCO page shows 'Please enter your card number'
- Enter card number again
- Click 'Finish'. Dialog "Would you like to pritn a receipt?' appears.
- Wait > 20 seconds (value of SelfCheckTimeout) and then confirm.
=> Result: Message appears "Timeout while waiting for print confirmation"
- Click on OK.
=> Result: Self checkout page refreshes (shows 'Please enter your card number')
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=11497
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to Reports -> Use saved (or build a new one if you have none saved)
2) Click on the Actions drop down and confirm that when you click Delete from here, a confirm message shows up. Click Cancel.
3) Click Show in the drop down menu
4) Click Delete in the Reports toolbar. Confirm you now get a confirm message. Clicking Cancel will cancel the delete, and clicking OK deletes the report and takes you to the saved reports page.
Spponsored-by: Catalyst IT
Signed-off-by: Magnus Enger <magnus@libriotech.no>
After applying the patch I get a JavaScript popup confirmation when
I click on the delete button, in the Show, Edit and Run views. Nice!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Okay how about this:
This patch has no floating toolbar or names styled as links. I've removed the radio buttons. The row is clickable and will redirect you to the user's page.
EDIT: This patch makes the cursor a pointer when hovering over the patrons. The row will also be highlighted on hover to make it even clearer.
EDIT2: Removes unnecessary 'Select' button
To test:
1) Put in a patron search that will bring back a long list of patrons (ie the letter 'a')
2) Select a patron by clicking anywhere on the row - confirm you are taken to the correct patron page
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Submit button removed, patron selection on this screen much better for long lists (and short ones as well.)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Unit test: Added a few lines to add the CPL branch the test depends on.
Help file: Changed a few occurrences for new to new_status
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes a bug introduced by bug 14544.
Holds can not be placed from lists at the OPAC, the action results in a
crash:
Can't call method "field" on an undefined value at
/home/koha/src/C4/Items.pm line 1504.
at /home/koha/src/opac/opac-reserve.pl line 601
Before 14544, the checkboxes were named 'ACT-$BIBNUM', something like
REM-4242. Now we can retrieve the biblionumber from the value.
Test plan:
Select a public list
check some titles and click on the 'Place hold' link
you should able to process the reservation
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch add display link in XSLT for field 264/bug 14198 and reflect the
Zebra index 'Provider' in detail page for OPAC screen.
To test: follow previous test plan
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch add display link in XSLT for 264 for bug 14198 and reflect the
Zebra indexing 'Provider' in detail page for Intranet.
Test plan
1) Update zebra index if no Provider: index exist
2) Do a search by Provider:
3) Goto detail page for a record with 264
4) Look that there no display link for 264 field.
5) Apply the patch
6) Reload the page, notice about the link, click the link an confirm
the new index Provider works fine
7) Test with multiple records with 260 and 264, if you prefer follow test plan
for bug 14734
8) Access an RCAA2 record just with 260 field
9) Notice that 260 has been updated with Provider index too.
NOTE: The intention of Provider index -according with documentation- is
to collect multiples fields including 260, 264, 270, and 257
Sponsored-by: Universidad de El Salvador
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
Apply patch and go to pretty much every page on the Intranet - look out
for labels on forms etc where there should be colons but aren't. If you
see any that I've missed but I'm 99% sure I got all of them! Make sure
to click through some forms where creating a new thing involves
continuing the submission on multiple pages.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Rebased on current master and checked all changed pages.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Inventory/Stocktaking
2) Submit empty form to bring back all records (or specify, up to you)
3) Notice column name 'Unseen since'
4) Apply patch and go back to Inventory/Stocktaking, resubmit form
5) Confirm column name is now 'Last seen' and makes more sense
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Circ -> Transfer to Receive
2) Confirm 'Cancel transfer' now shows as a button and works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Acquisitions and find a vendor
2) Add to a basket from a suggestion
3) Confirm that 'Order' next to the suggestions looks like a button and works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
How I tested:
Verified bug with start and end date (were not cleared without patch).
After applying the patch all fields defined in SubscriptionDuplicateDroppedInput
were cleared as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Wrong var loop used!
Test plan:
Add a message for a patron on the checkouts page.
The library name should be displayed.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Same test plan as previous patch, but for opac defail and result using
the XSLT views.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I am amazed!
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
to test...
1/ set TrackClicks syspref to 'track'
2/ add a problematic multipart url to an item's 'url' field
example url: http://foo.corg?key1=val1&key2=val2
3/ test url in opac-detail.pl - url is corrupt
4/ apply patch - url is corrct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Only fixes the item URLs - a follow-up for the URLs
in the bibliographic record (856 for MARC21) is still
needed.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The JavaScript embedded in the MARC framework template is not
dependent on template processing to such an extent that it can't
be safely moved to a separate file. This patch does so, adding
definition of a few translatable strings to the template.
To test, apply the patch and go to Administration -> MARC frameworks.
- The table of existing frameworks should be sortable.
- The "Export" link should trigger the export modal.
- The "Import" link should trigger the import modal.
-- Clicking "Import" without selecting a file should trigger an alert.
-- Selecting the wrong file type should trigger an alert.
-- Importing a file of the correct type should trigger an overwrite
warning ("Do you really want to import...?").
-- A progress indicator should show during the import, with correct
values for "Importing from" and "Importing to".
-- Importing an incorrectly-formatted file of a correct type should
trigger an alert, "Error importing the framework..."
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Export and Import options work properly
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch introduces an XSLT file grabbed from DSpace and a couple
css files.
To test:
- Point to your dev Koha's oai endpoint. For example:
http://localhost:8080/cgi-bin/koha/oai.pl?verb=ListMetadataFormats
=> FAIL: Look how ugly it is for humans.
- Apply this patch
- Reload
=> SUCCES: It is styled and provides really useful links to interact with
the OAI server verbs.
- Sign off :-D
Sponsored-by: Universidad Empresarial Siglo 21
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. Nice looking.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Edit: Removed datatables stuff and fixed merge conflict
Edit: Removed code from Comment 9 (no it wasn't intentional)
Edit: Putting <tr> line back
To test:
1) Go to Authorities and do an authority search (authorities-home.pl)
2) Confirm that the options (Edit, Merge, Delete) are there and behave
as expected.
EDIT: 3) Click Delete then Cancel, confirm page does not scroll to the top
Sponsored-by: Catalyst IT
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to the detail page for a record with holds (catalogue/detail.pl)
2) Confirm Holds count is no longer in bibliographic information but is
present in tab and Place Hold button is still on toolbar
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch makes modifications to the global CSS file in order to make
font rendering in buttons more consistent. The Bootstrap CSS is setting
font styles which are not being consistently overriden by the staff
client's CSS.
To test, apply the patch and clear your browser cache if necessary.
Check several places to confirm that the changes look correct and don't
go too far:
- Go to the "Patrons" home page. The "New patron" and "Patron lists"
buttons should look consistent with each other.
- Locate a patron and view their detail page. Toolbar buttons should
look correct.
- Go to Administration -> Libraries and Groups and click the "Delete"
button on any library. Verify that the warning dialog buttons look
correct.
- Go to Cataloging and open the advanced editor. Confirm that toolbar
buttons look correct.
- Go to Tools -> Stage MARC records for import and confirm that the
"Upload file" button looks consistent with other generic submit
buttons.
Applied alternate patch only, followed test plan, buttons display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
We have several others places where a td contains buttons. This patch
fixes the ones in table generated server-side.
Test plan:
Search for patrons and shelves: the buttons should not wrap
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
EDIT: Adding nowrap styles to the Action column. I chose to do it with a span because that's the way it's already done in this file for another column.
To test:
1) Go to Patrons and do a search that will bring up more than one result
2) Confirm 'Edit' now shows as a font awesome button and works as expected
3) Confirm the button does not wrap when you make your browser narrower
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Ensure your non-public note field is mapped to the
items.itemnotes_nonpublic database column
2) Edit an item, add a test nonpublic note
3) Verify the nonpublic note is shown in the items table on the Detail view.
sponsored-by: New Zealand Ministry of Education Library
sponsored-by: New Zealand Central Agencies Library
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed a stray Data::Dumper
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to Admin -> Library Transfer Limits
2) Notice that you do not have to click the Choose button when selecting a new library
3) Refresh page
4) Notice that Choose button is gone and page still works
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The professional cataloging interface uses Glyphicons. They should be
replaced with Font Awesome icons.
I have replaced the "Import record" icon as per the discussion on Bug
15966 about which icon better expresses import vs. export.
To test, apply the patch and go to Cataloging -> Advanced editor.
- Confirm that the icons in the toolbar look correct.
- Click the "Macros" button and confirm that toolbar buttons in the
modal look correct.
- Click the "Advanced" link in the left-hand sidebar and confirm that
the buttons in that modal look correct.
- Click the "Save" button without adding anything to the blank record.
Confirm that the "Missing..." error messages are styled with the
correct icon.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch removes sentence splitting of the database administrator warning with
a button styled link.
Additionally, it uses the same wording as in the warning on the 'About' page.
To test:
- Apply patch
- Log in to Staff client as database administration user
- Verify that the wording of the warning is the same as on the About page (Tab
'System information')
- Verify that the link to the patron administration page is styled as a button
and behaves correctly
NOTE: Actually, the category is irrelevant. But I like the improved message.
Categories may or may not be set up at the initial log in.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
If patron infos contain invalid JSON chars (\t for instance), the
results won't appear.
The solution is to escape these info.
Test plan:
Edit patron infos in DB (update borrowers set surname="foobar\t" where
borrowernumber=42)
Search for foobar (you should have more than 1 result)
Without this patch, DT retrieves a bad formatted JSON and the results
won't appear.
With this patch, the table result appears
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1 - Enable Syndetics Reviews without a LibraryThing ID
2 - Check page source and note you have a stanza for LTFL tabbed reveiws
3 - Apply patch
4 - Reload page and note LTFL tabbed reviews are not present
5 - Enter a LibraryThing ID and not the tab is restored.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
datatables.inc loads dataTables.buttons.min.js and buttons.colVis.min.js
since bug 15285: Update common files because the dom param now contains
'B'. The DT init fails with it does not know what 'B' means.
Test plan:
Test tables using buttons (columns visibility), they should work as
before this patch.
Tested with patron search and administration/currencies, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Before 15632, flagged was passed in any cases: GetMessages returned an
arrayref, so:
my $bor_messages_loop = GetMessages( $borrowernumber, 'B', $branch );
if($bor_messages_loop){ $template->param(flagged => 1 ); }
set 'flagged'.
It seems that this variable is not needed as it's always set.
Test plan:
Confirm that the "Add a new message" link is always displayed (even if
no message exist).
Note that a "Attention" is displayed but should not, that already
existed before bug 15632.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To reproduce:
- Add multiple subfields 856 u to a bilbio
- Add this biblio to a cart and send it as mail
(from Staff client and from OPAC)
Result: Links in mail body are broken
To test
- Apply patch
- Send carts again (from Staff client and from OPAC)
- Result: In mail body, links display separated with blank-pipe-blank
like http://bla.com | http://blabla.com | http://blablabla.com
- Change one of the 856 u to not to be a link, e.g. äöü
- Send carts again
- Verify that in mail body äöü correctly display as text.
(Amended to make it work for OPAC as well, MV)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When deleting quotes, the table is not regenerated and a JS error is
raised.
That is because we are not using an up-to-date plugin
Test plan:
Delete a quote and confirm you do not get a JS error
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The JavaScript which handles the display of Google book cover images
includes a hard-coded "style" attribute. It may have been relevant to
the design of the old prog template, but it doesn't seem to have any use
in the Bootstrap one. This patch removes it.
I have replaced the style attribute with a class in case someone needs
a hook for some custom CSS.
To test, apply the patch, enable the GoogleJackets system preference,
and clear your browser cache if necessary.
- Search for a title in the OPAC which has a Google book cover image
associated with it.
- View the detail page for that title. Confirm that the "Google Preview"
link underneath the cover image looks correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to Acquisitions and do an empty vendor search
2) Should now read "Vendor search: X results found"
3) Enter a search term and search for vendor
4) Should now read "Vendor search: Y results found for 'search term'"
Sponsored-by: Catalyst IT
NOTE: two nested if/else/end's could make it result/results,
as suggested in comment #3. However, this meets my understanding
of the problem as defined in comment #0.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
There are a few template which use a different wrapper class for the
pagination links. These should be made consistent for a consistent
style.
To test, apply the patch and go to Administration -> Budgets.
- On this page the pagination markup has been removed in favor of
DataTables pagination. The budget tables were already sorted using
DataTables, so having server-side pagination on top of that doesn't
make sense.
In Administration -> Class sources:
- This page had pagination markup which was unused.
In Authorities -> Authority search results:
- Perform an authority search which will return more than one page of
results. Confirm that the pagination links are correctly styled.
In Search -> Item search:
- Perform a search which will return more than one page of results.
Confirm that the pagination links are correctly styled.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since the funds are all displayed (and nobody complained), it makes sense to
display all budgets.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch rearranges some parts of the OPAC detail page template so
that the "add tag" link does not appear if the user is not logged in.
This patch also includes some whitespace changes, so please diff
accordingly.
To test, apply the patch and set "TagsEnabled" to "Allow."
- With "TagsInputOnDetail" set to "Allow," view the detail page for a
bibliographic record in the OPAC when /not/ logged in. You should see
a "Log in to add tags" link which triggers the login modal when
clicked.
- Log in and view the same page. Confirm that there is now an "Add
tag(s)" link which triggers the add tags form. Confirm that the
behavior of the add tags form is still correct.
- With "TagsInputOnDetail" set to "Don't allow" view the detail page
again and verify that the "Log in to add tags" link doesn't appear
when not logged in, and the "Add tags" link doesn't appear when logged
in.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Log in to OPAC, go to your purchase suggestions (opac-suggestions.pl)
2) Confirm there is now a 'Suggested on' column displaying the date of your past suggestions
3) Add a new purchase suggestion and confirm that the date displayed is correct
Sponsored-by: Catalyst IT
Signed-off-by: Marjorie <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch sorts users by surname.
Also string fix -> Firstname to First name in column heading
To test:
1) Go to a patron list
2) Confirm it is sorted by surname
3) Add a patron that will need to slot in the middle somewhere
4) Confirm the data table sorts it correctly
5) Confirm column heading change
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch revises the hold ratios report so that it uses template
plugins to display descriptions instead of codes for item holding
branch, item home branch, item type, and shelving location.
To test you should have multiple items on the hold ratio report (set the
ratio to a small number to increase the number of results). It should
include one or more items which have a shelving location set.
View the hold ratios report and confirm that library names, shelving
location descriptions, and item type descriptions are shown instead of
codes.
This revised patch steals from Bug 15560 to enable the correct display
of multiple home libraries, holding libraries, shelving locations, item
types, and call numbers. To properly test you should have records in
your report which have multiple values for each of those fields.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Patron lists pages do not show the Tools sidebar menu like other tools
pages do. This page adds it to two views: The list of lists, and the
page for adding to a list.
To test, apply the patch and go to Tools -> Patron lists.
- Confirm that this page has the tools sidebar menu.
- On any existing list click Actions -> Add patrons.
- Confirm that the page has the tools sidebar menu.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Edit: Have removed the datatables stuff - wasn't necessary. Also fixed a
merge conflict
Edit: Comment 7
To test:
1) Go to Cataloging and do a search in the catalog and reservoir
(cataloguing/addbooks.pl)
2) Confirm that for the results found in catalog, the options (MARC and
Card preview, Edit biblio, Add/edit items) are there and behave as
expected.
3) Confirm that for the results found in reservoir, the options (MARC
and Card preview, Add biblio) are there and behave as expected.
4) Set user permissions so that the user cannot edit the catalog or
items. (editcatalogue -> edit_catalogue and edit_items)
5) Confirm that you no longer see the options to edit or add
items/biblio in either table.
Sponsored-by: Catalyst IT
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Expected result following the test plan.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This trivial follow-up adds an "actions" class to the table cell
containing the new buttons. In conjunction with the style update in Bug
16048, this will prevent the buttons from wrapping at narrow browser
window widths.
Also changed in this patch: A couple of capitalization errors.
To test, apply the patch for Bug 16048 and go to Administration ->
Classification sources. Confirm that the "Edit" and "Delete" buttons do
not stack on top of each other even at narrow browser widths.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to Administration -> Classification sources
2) Confirm that the actions 'Edit' and 'Delete' now show as buttons for
BOTH tables and work as expected.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Several pages use <div class="note"> to display important information
about the functionality on the page. The style of this div can be
modified to use Font Awesome, eliminating an image file.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> Authorized values.
- Confirm that the "NOTE" box is styled correctly.
- Edit an existing authorized value.
- Confirm that the "NOTE" box is styled correctly.
- Go to Tools -> Batch record deletion.
- Submit a batch of biblionumbers.
- Confirm that the "Reminder" box is styled correctly.
- Go back and submit a batch of authority numbers.
- Confirm that the "Reminder" box is styled correctly.
- Go to Tools -> Batch record modification.
- Submit a batch of biblionumbers.
- Confirm that the "Reminder" box is styled correctly.
- Go back and submit a batch of authority numbers.
- Confirm that the "Reminder" box is styled correctly.
- Check that there are no other references to "note.png" in the
templates.
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To test:
1) Go to Acquisitions
2) Go to the basket groups for a vendor
3) Confirm that an open basket group has the option to 'Close and export as PDF'
4) Confirm that a closed basket group has the option to 'Export as PDF'
5) Confirm these buttons still work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes another instance in the checkin template where a Font
Awesome icon should be used instead of a background image.
To test, apply the patch and locate an item which is on hold for a
patron at your logged in library.
- Check in the item.
- Confirm the hold.
- Check in the item again.
- You should get a "Hold found (item is already waiting)" message. The
"Print and confirm" button in this dialog should have a Font Awesome
icon.
- Confirm that the print button still works correctly.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch updates links in the patron edit and batch patron
modification templates to use Font Awesome icons instead of
background-images.
To test you must have ExtendedPatronAttributes enabled and at least one
repeatable attribute defined.
- Apply the patch and edit any patron record.
- In the section for editing attributes and identifiers, check the
styling and behavior of the "Clear" and "New" links.
- In Tools -> Batch patron modification, load a batch of patron records.
- In the "Edit" form, check the style and behavior of the "Clear" link
for date inputs.
- Test the "New" and "Delete" links for patron attributes.
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
