Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Four instances of onclick here:
1) Print
2) Save to your lists
3) Add to your cart
4) Remove from cart
To test:
Find a biblio detail page in OPAC and confirm all four events above work
as expected before and after the patch.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] Adds a check on biblionumber. (Prevents a DBIx error.)
[2] If you have a reviewid, search on that and check results.
Add an unauthorized error in template.
[3] If you add a new review, check that there is no review yet.
If so, edit the existing one.
This supports the added FIXME on a unique constraint.
Note: This script could receive further attention.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all crud ops with opac-review.pl (incl URL manipulation).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Paging is kind of messy here. This patch at least improves somewhat.
The page number should be rounded.
The results per page should be passed to the template too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested a number of reviews and played with count parameter in URL.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Reviews::getreviews subroutine retrieved the reviews for a given
record, depending on their status.
This can be achieve with a call to Koha::Reviews->search.
There were 2 calls to this subroutine. The one from opac-ISBDdetail.pl
does not look in used: the reviews are not display on this page. It
certainly comes from an old copy/paste from opac-detail.pl.
The one from opac-detail only asked for the approved reviews. So the
logged in user does not see its own review if it is pending approval.
Actually this pending approval review is only displayed when the user
submits it (because of a unecessary complex text replacement done in
JS).
With this patch, the approved reviews AND the unaproved review from the
logged in user will be displayed.
It will allow a future enhancement to add a way to delete our own
reviews.
Moreover, the reviews were retrieved even if they were not displayed (if
reviewson is off), it's now fixed.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- HTML5 input pattern for copyrightdate was not taking into an account
the database field type, which is smallint(5)
- added title="..." for the year field so the acceptable date format
should be displayed as a hint/tooltip in the browser
- added an missing option for configuring branch/library as mandatory
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a configuration option which allows to define which
fields should be mandatory for a patron purchase suggestion form in OPAC.
Test plan:
1/ Apply patch.
2/ Play with the new OPACSuggestionMandatoryFields system preference
(select some fields as manadatory, select all, deselect all, try to
submit some suggestions with mandatory fields filled and/or not
filled etc.) to ensure that required fields (and only required fields)
are enforced in the browser to be filled.
3/ With all options deselected, 'Title' field should still be
mandatory (by default).
Signed-off-by: barbara johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
opac-ics.pl was added to Koha back in 2007, but there has not been a link to it
from anywhere. This patch adds the link from the main view on
/cgi-bin/koha/opac-user.pl, and makes some changes to opac-ics.pl itself.
Changes to opac-ics.pl:
- Update the code to use date and time for when a loan is due
- Use dt_from_string to turn a MySQL time and date into a DateTime
- Add a timestamp and a UID (these were reported as necessary by a couple of
iCal validators)
- Remove DTEND from events, since we now have time as well as date for when a
loan is due
- For loans that are overdue, set the DTSTART to now(), to avoid creating
calendar events in the past
- Use a template to generate text strings, to make them translatable
To test:
- Apply the patch
- Make sure you have at least a couple of loans, including one overdue
- Go to /cgi-bin/koha/opac-user.pl and click on the link labeled "Download as
iCal/.ics file"
- Inspect the file in a text editor and/or view the result in a calendar
appplication. Make sure the data makes sense.
- Sign off and go thee merrily on thine way.
Update 2016-07-25
- Force date_due to UTC to avoid problematic timezone info like this:
DTSTART:TZID=Europe/Zurich:20160724T235900
- Remove quotes from summary and description
Followed test plan, koha.ics file successfully imported to Thunderbird calendar
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a message to the patron home page in the OPAC to be
shown if the user is restricted because of a discharge.
To test, apply the patch and log into the OPAC as a patron who has been
discharged.
- You should see a message which says so, including a link to
the discharge notice.
- Log in to the OPAC as a patron with a manual restriction and confirm
that the correct notice is displayed.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the OPAC display "Not renewable (on hold)" when
a hold is placed.
Test plan:
1) Do not apply patch.
2) Issue an item with automatic renewal.
3) Issue an item with manual renewal.
4) Place a hold on both items.
5) Log in as patron and note that the column "Renew" says "Automatic
renewal (x of y renewals remaining)" for the auto renewed item
and "(On hold) for the other item.
6) Apply patch.
7) Refresh OPAC and note that now "Not renewable (on hold)" is displayed
for both items.
8) Cancel the holds, then log in as patron again and confirm that the
correct renewal conditions are displayed.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Even if library groups/search domains are not defined in the system,
(empty) select for "Groups of libraries" under "Location and
availability" section in OPAC advanced search is still visible; it
shouldn't. Side effect of Bug 15295 - 'searchdomainloop' variable
in the template is now an object, it needs a different kind of statement
(.count) for checking if it's empty or not.
To test:
1) apply patch
2) when there are no groups of libraries defined in Administration ->
Libraries and Groups, "Groups of libraries" selection should be
no longer visible in OPAC adavanced search page
3) add library group or two: "Groups of libraries" selection should
reappear.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds some missing literary formats to the staff client and
OPAC's search results XSLT display.
To test you must have DisplayOPACiconsXSLT and DisplayIconsXSLT system
preferences enabled. XSLTResultsDisplay and OPACXSLTResultsDisplay
should be set to 'default.'
Perform searches in the staff client and the OPAC and confirm that the
following literary forms (defined in 008 position 33) display correctly:
Not fiction; Fiction; Dramas; Essays; Novels; Humor, satires, etc.;
Letters; Short stories; Mixed forms; Poetry; Speeches.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
POC, tests needed.
Alternative patch works for me.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In patron acount ("your personal details" tab, which serves as a form
for submitting update requests as well) it's not possible to display
some account details like expiration date etc., without enabling
the field for branch / library update requests too.
To reproduce:
1) set OPACPatronDetails to "Allow"
2) clear PatronSelfModificationBorrowerUnwantedField preference
- all possible fields in the update requests form are visible
in patron account, including some extra details (card number,
expiration date, category) in the "Library" section on top
3) put 'branchcode' in PatronSelfModificationBorrowerUnwantedField preference
4) the whole 'Library' section disappears
To test:
1) apply patch
2) put 'branchcode' in PatronSelfModificationBorrowerUnwantedField,
'Library' section should remain visible (sans branch selection option)
3) put 'branchcode|cardnumber|datexpiry|categorycode' in the same
preference, 'Library' section should now disappear
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When registering a new patron, if something went wrong, the form is
resent to the template but without the categorycode (not a dropdown list
anymore, but just displayed as a readonly value # TODO LATER).
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Also, it is recommended to apply bug 17103 before this.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Oliver Bock <oliver.bock@aei.mpg.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When running Koha in a full-site-SSL configuration accessing
external resouces like Open Library cover images via HTTP
doesn't work (mixed SSL/non-SSL content). It thus breaks a
core feature of Koha. Referencing such resources always via
HTTPS resolves the problem and also enhances privacy as a
side-effect.
Previous tickets took care of Amazon resources. This ticket
is supposed to address the remaining external resource providers,
starting with Open Library.
TEST PLAN
---------
1) Over https access your OPAC with the Enhanced Content system
preferences 'OpenLibraryCovers' set to 'Add', and
'OpenLibrarySearch' set to 'Show'.
2) Search for something (e.g. Mo Willems)
-- Your browser console log will show messages about
mixed content.
3) Apply the patch
4) Making sure to reload the java script, attempt steps 1 & 2
again.
-- no mixed content messages should be given
5) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the hardcoded protocol ("http") from the URI with
https since that is what Google defacto uses to serve JS resources
Prevents MIXED CONTENT failure, allowing GoogleIndicTransliteration
to function correctly when used in SSLized OPACs.
Test plan
---------
1/ Make sure your OPAC is being served both over HTTP and HTTPS
2/ Set GoogleIndicTransliteration syspref to "Show"
3/ Access the OPAC over http, Google transliteration element will
show up in masthead searchbox.
4/ Access the OPAC over https. The element will not show. Console
will show MIXED CONTENT error and failure of google loader.
5/ Apply patch. Repeat steps #3 and #4 again. Now in both cases
GoogleIndicTransliteration will work.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To verify:
- Log in to OPAC as a user who has fines or credits
- Go to page "your fines"
- Verify that values for "Fine amount", "Amount outstanding"
and "Total due" are not formatted as defined in syspref CurrencyFormat
(e.g. for FR)
To test:
- Apply patch
- Repeat steps above
- Verify that values are formatted as appropriate with different
settings for syspref CurrencyFormat
Note: This patch does not force text alignment to the right.
Text alignement can be done using syspref OPACUserCSS
(td.sum, td.credit, td.debit)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
- for a particular item type & patron category, configure a non-zero
"no renewal before" date so items can't be immediately renewed
- sign in as a patron in aforementioned patron category
- check out an item of aforementioned item type
- go to your renewals page in OPAC /cgi-bin/koha/opac-user.pl
- an error messages appears in the div.alert.dialog up top
Sponsored-by: California College of the Arts
Signed-off-by: Brendon Ford <brendon.ford@manhattan.edu>
Signed-off-by: Irma Birchall <irma@calyx.net.au>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Playing with OPACResultsLibrary syspref, biblio with items having different
home/holding library are displayed properly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
empty HTML list item on 'holds' page, to test:
- sign in as user
- attempt to place hold
- view source in between 'holds note' textarea & <!-- ITEM HOLDS --> comment
- note empty <li>
- apply patch
- repeat process above up until patch
- no more empty <li>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
At the OPAC there is no way to empty this value.
I think it should be allowed to empty it.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine just reads the content of a pref, split it, add an
empty string and returns.
It is not really useful and the code in the script (memberentry.pl) uses
the only occurrence of CGI::popup_menu
Let's remove it and build the dropdown list in the template.
Test plan:
1/ Empty BorrowersTitles, edit a patron and confirm that the "Salutation"
does not appear
2/ Fill BorrowersTitles with "Mr|Mrs|Miss|Ms", edit a patron and confirm
that the "Salutation" dropdown list is correctly filled.
The default option should be selected if you are editing a patron with a
title defined.
This should also be tested at the OPAC.
Followed test pan, works as expected in Staff and OPAC
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Trigger
/opac-imageviewer.pl?biblionumber=14&imagenumber=7"><sCrIpT>alert(42)<%2fsCrIpT>
=> Without this patch you will see the JS alert
=> With this patch applied you won't see it
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Authority Search and do a search
2) Notice that there is a Full Heading column that has 'View full
heading' links. These take up a lot of space and don't mean a lot to
the user
3) Apply patch and refresh
4) Notice that the the Full Heading column is gone and there is now a
Details column next to the authorities. Confirm the link takes you to
the expected authority detail page.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Add some course reserves
2 - View the table in staff and opac, there is no column for author or
link
3 - Apply patch
4 - You shoudl see these columns
5 - Link should contain item uri if present, fallback to title 856$u,
then be blank if niether
Sponsored by:
Southeastern Wisconsin Information Technology Exchange, Inc (SWITCH)
(http://caspian.switchinc.org/)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Might be good to add this table to the column visibility tool if you
plan to add more columns.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes issues due to sentence splitting in
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
Note: This is a string patch. It does not add or change functionallity.
To test:
- Examine code and verify that the text changes remove sentence splitting
and that the changes make sense.
- Log in to OPAC and verify that messages look correct
- with blocked /debarred user (with and without comment and date)
- with user who has to much fines (needs syspref OpacRenewalAllowed
and syspref OPACFineNoRenewals)
- with user who has his card marked as lost
- with user with an account that is about to expire
- with user with expired account
- with user with uncertain address information (with and without
syspref OPACPatronDetails set to Allow)
Note: Amended to make patch apply 2016-07-10 mv
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The authority search pagination displays only 15 pages, even when there
are more.
To fix that, this patch mimic the authorities-home.pl intranet script to
manage the pagination.
Test plan:
Without this patch, do some authority search and click on different
pages.
Apply this patch, redo the same search and make sure the same records
are displayed (i.e. confirm that the pagination still works as before).
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
-- dies before finishing tests
-- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
-- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
-- says 'getalert'
-- all tests pass.
8) Log into OPAC with database admin user.
-- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised
NOTE: Revised test plan, as Jonathan added useful test case.
Works as I've tested above.
Hector tested older test plan which was steps
5,6,8 and 9.
Revised test plan again while tweaking to address comment #9.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In authorities search results, UNIMARC flavour, linked headings are displayed
with a link type : BT, NT, UF, RT.
This patch adds a abbr tag around those acronyms to know there meaning :
BT = Broader Term
NT = Narrower Term
UF = Used For
RT = Related Term
Acronyms are used because there can be a lot of linked headings, using abbr
will display the complete text on mouse over.
Test plan :
- Use UNIMARC database
- Create an authority with :
250 $a Heading250a
450 $a Heading450a
550 $5 a $a Heading550a
550 $5 g $a Heading550g
550 $5 h $a Heading550h
- Save an index zebraqueue
- Go to intranet authorities search
- Search for "Heading250a"
- You see :
Heading250a
Heading250a
UF: Heading450a
RT: Heading550a ; BT: Heading550g ; NT: Heading550h
- Move your mouse over the acronyms, you see a tip with the complete text
- Same with opac authorities search
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. Translatable.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.
Sponsored by:
North Central Regional Library (http://ncrl.org/)
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alternate patch with wording as proposed in comment #12
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the same tests in the aoColumns DT definition than the
ones in the creation of the table. That's sound good.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes the value of the "comment" column in "borrower_debarments" table
from "Restriction added by overdues process yyyy-mm-dd hh:mm:ss" to
"OVERDUE_PROCESS yyyy-mm-dd hh:mm:ss" in the overdue_notices.pl. Then in
the templates "moremember.tt", "circulation.tt", "memberentrygen.tt",
"opac-reserve.tt" and "opac-user.tt" the value of "comment" is
check, if it's an automatical comment due to overdue process it'll
write "Restriction added by overdues process yyyy-mm-dd hh:mm:ss",
then if there is a customizable comment it will be written without
modification. Like this, the comment "Restriction added by overdues
process" is written in the po files and can be translated later.
To test:
1) create a patron with automatical restriction due to overdue process;
2) apply patch;
3) run misc/cronjobs/overdue_notices.pl;
4) verify if the comment "Restriction added by overdues process" is well
written and translatable on the following page :
- opac patron home page (opac-user.tt);
- opac item reservation page (opac-reserve.tt);
- pro patron page (moremember.tt);
- reservation item for a patron (circulation.tt, memberentrygen.tt);
5) try to translate the comment in po files;
6) sign off.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes course reserves to check for item notes form the
course reserve and fallback to itemlevel notes if they are empty
To test:
1 - Enabvle course reserves
2 - Add some items
3 - Make sure the items have notes at the item level and not at course
reserves
4 - Notes don't display in staff or opac
5 - Apply patch
6 - Notes display in staff and opac
7 - Add notes at course reserves level
8 - These override the item level notes
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The bug is related to 10851. Due to add of status in 10851, status added were
missing in opac-detail.tt and opac-full-serial-issues.tt. The patch just added
these missing status.
To test:
1) Create New subscription in Serials, in Intranet
2) Do a search of the new subscription by Title
3) Take Serial receive as Actions to edit the status to Missing (<something>)
4) Go to Opac and Search the subscription created, by its title and See missing status
5) Apply patch, status must be showed.
6) Sign off
Followed test plan, works as expected.
Amended to format commit title and message.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an attacker can get an authenticated Koha user to visit their page
with the code below, they can update the victim's details to arbitrary
values.
Test plan:
Trigger
/cgi-bin/koha/opac-memberentry.pl?action=update&borrower_B_city=HACKED&borrower_firstname=KOHA&borrower_surname=test
=> Without this patch, the update will be done (or modification
request)
=> With this patch applied you will get a crash "Wrong CSRF token" (no
need to stylish)
Do some regression tests with this patch applied (Update patron infos)
QA note: I am not sure it's useful to create a digest of the DB pass,
but just in case...
Reported by Alex Middleton at Dionach.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Regression introduced by bug 13918: the library names are not displayed
anymore for holds in transit.
They are 2 warns in the logs:
No method wbrname! at
/home/koha/src/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
line 603.
No method wbrcd! at
/home/koha/src/koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
line 603.
Test plan:
Make sure you have holds in transit and go the opac-user.pl
In the "Holds" tab, you should see "Item in transit to LIBRARY NAME"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
