This patch restores the ability to request a DBI database handle
or a DBIx::Class schema object connected to a PostgreSQL database.
To address the concerns raised in bug 7188, only "mysql" and "Pg"
are recognized as valid DB schemes. If anything else is passed
to C4::Context::db_scheme2dbi or set as the db_scheme in the Koha
configuration file, the DBD driver to load is assumed to be "mysql".
Note that this patch drops any pretense of Oracle support.
To test:
[1] Apply patch, and verify that the database-dependent tests
pass when run against a MySQL Koha database.
[2] To test against PostgreSQL, create a Pg database and
edit koha-conf.xml to set db_scheme to Pg (and adjust
the other DB connection parameters appropriately). The
following tests should pass, at minimum:
t/Context.t
t/db_dependent/Koha_Database.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some additional notes:
- Installed Postgres following
http://wiki.ubuntuusers.de/PostgreSQL
- Created a database user koha
- Created a database koha
- Changed the koha-conf.xml file
<db_scheme>Pg</db_scheme>
<database>koha</database>
<hostname>localhost</hostname>
<port>5432</port>
<user>koha</user>
<pass>xxxx</pass>
- Installed libdbd-pg-perl
- Ran the web installer until step 3 everything looked ok
Step 3 complains:
Password for user koha: psql: fe_sendauth: no password supplied
- Both t/Context.t and t/db_dependent/Koha_Database.t pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.
To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
- dev
- single
- standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.
Then, build your packages and test on your newly created instances.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The previous patches were missing the koha-conf.xml updates. This patch
updates koha-conf.xml and makes the changes neccessary to include the
QueryParser configuration file in the packages.
To test:
1) Run Makefile and check generated koha-conf.xml to confirm that the
line <queryparser_config>...</queryparser_config> is there with an
absolute path.
2) That was it.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested update successfully - new line now shows up and
query parser is used.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Modify Makefile.PL and Zebra configuration files in order to parametrized
biblio record type returned by Zebra Z39.50 server.
How to test:
- Test with a MARC21 and a UNIMARC DB
- Do a new installation
- Search from OPAC
- Search from a Z39.50 client like yaz-client: syntax = MARC21/UNIMARC must be
choosed
- It was working for MARC21: it continues to work
- It wasn't working for UNIMARC: it works now, both in OPAC and from a Z39.50
client
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works fine for MARC21. Frederic looked at UNIMARC. Magnus looked at NORMARC.
GRS1 works okay for me. I still have issues with DOM, but they are not directly related to changes in this patch.
A followup is still needed for packaging (debian/templates).
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch builds on work by Lars Wirzenius for the Koha packages.
To date, the only way for a Koha librarian to obtain a complete backup
of their system has been to log into the system via SSH (or FTP) to
download the mysqldump file. This patch makes it possible for
superlibrarians in properly configured systems to download night backups
via the staff client's Export tool.
Recognizing that this is functionality with potentially very grave
security implications, system administrators must manually enable these
features in the koha-conf.xml configuration file.
The following configuration settings have been added to the koha-conf.xml
file:
* backupdir => directory where backups should be stored.
* backup_db_via_tools => whether to allow superlibrarians to download
database backups via the Export tool. The default is disabled, and
there is no way -- by design -- to enable this option without manually
editing koha-conf.xml.
* backup_conf_via_tools => whether to allow superlibrarians to download
configuration backups via the Export tool (this may be applicable to
packages only). The default is disabled, and there is no way -- by
design -- to enable this option without manually editing koha-conf.xml.
This commit modifies the following scripts to make use of the new
backupdir configuration option:
* koha-dump and koha-run-backups in the Debian packages
* The sample backup script misc/cronjobs/backup.sh
Note that for security reasons, superlibrarians will not be allowed
to download files that are not owned by the web server's effective user.
This imposes a de facto dependency on ITK (for Apache) or running the
web server as the Koha user (as is done with Plack).
To test:
1. Apply patch.
2. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
3. Add <backupdir>$KOHADEV/var/spool</backup> to the <config> section
of your koha-conf.xml (note that you will need to adjust that so that
it is pointing at a logical directory).
4. Create the aforementioned directory.
5. Go to export page as a superlibrarian. Notice that no additional
export options appear because they have not been enabled.
6. Add <backup_db_via_tools>1</backup_db_via_tools> to the <config>
section of your koha-conf.xml
7. Go to the export page as a superlibrarian. Notice the new tab.
8. Go to the export page as a non-superlibrarian. Notice there is no
new tab.
9. Run: mysqldump -u koha -p koha | gzip > $BACKUPDIR/backup.sql.gz
(substituting appropriate user, password, and database name)
10. Go to the export page as a superlibrarian, and look at the "Export
database" tab. If you are running the web server as your Koha user,
and ran the above command as your Koha user, you should now see the
file listed as an option for download.
11. If you *did* see the file listed, change the ownership to something
else: sudo chown root:root $BACKUPDIR/backup.sql.gz
11a. Confirm that you no longer see the file listed when you look at the
"Export database" tab.
12. Change the ownership on the file to your web server (or Koha) user:
sudo chown www-data:www-data backup.sql.gz
13. Go to the export page as a superlibrarian, and look at the "Export
database" tab. You should now see backup.sql.gz listed.
14. Choose to download backup.sql.gz
15. Confirm that the downloaded file is what you were expecting.
If you are interested, you can repeat the above steps but replace
<backup_db_via_tools> with <backup_conf_via_tools>, and instead of
creating an sql file, create a tar file.
To test packaging: run koha-dump, confirm that it still creates a
usable backup.
------
This signoff contains two changes:
10-1. If no backup/conf files were present, then the message telling you
so doesn't appear and the download button does. Made them behave
correctly.
10-2. The test for a file existing required it to be owned by the
webserver UID. This change makes it so it only has to be readable.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
One consequence is that the -x and -a options are no longer
mutually exclusive.
Also, because of the way that the GRS-1 SGML filter works, if you're
indexing multiple documents, you can't just wrap them in a document
element, but the DOM filter *requires* it. Consequently, two
new config settings in koha-conf.xml are added to indicate the
Zebra filter in use so that the -x option of rebuild_zebra.pl
knows whether to wrap the exported records or not:
- bib_index_mode (defaults to 'grs1' if not specified)
- auth_index_mode (defaults to 'dom')
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the necessary bits to enable DOM indexing for bib
records as an option during installation from source.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Confirmed that memcached is still being used after the memcached configuration
in koha-conf.xml was removed, and the following two lines were added to
both virtual hosts in koha-httpd.conf:
SetEnv MEMCACHED_SERVERS "127.0.0.1:11211"
SetEnv MEMCACHED_NAMESPACE "KOHA"
I added a comment on the file so the user uncomments the appropriate koha-conf.xml sections.
To+
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This doesn't insert the large and typically unused <ldapserver> block,
just the switch with a comment pointing to C4::Auth_with_ldap. This otherwise
was undocumented requirement, making LDAP config a bit of a shot in the dark.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
All new authority features will be based on the DOM indexing.
To update an existing installation, do the following:
[1] run perl Makefile.PL
[2] make
[3] make update_zebra_conf
[4] copy the new koha-conf.xml to $KOHA_CONF
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Needed to restore OpenSearch capabilities, and did the following while
I was at it:
* add support for unAPI: http://unapi.info/
* add basic support for COinS and OpenURL:
http://ocoins.info;
http://www.niso.org/committees/committee_ax.html
* ^^ Gives us Zotero Support!
* adding some XSLT stylesheets for handling additional transformations
NOTE: English and MARC21 specific unfortunately
* adding back opensearch/rss feed <link>s for autodiscovery
TODO: after the installation, to get the Zebra system running on an external
port it's necessary to hand-edit the configs. I'm looking into Virtual Hosts
which could solve that problem (run on both the socket and a port).
Need to add better error handling to the unapi and opensearch scripts
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This commit is a partial fix to authority control for MARC21,
and better authority handling in general (for UNIMARC too).
Before this patch, authority searching, editing, saving, was
not functioning, or was extremely buggy.
WARNING: You will need to re-index your authority database after
applying this commit.
The following changes have been made:
* Normalizing record.abs index names (in both MARC21 and UNIMARC)
* Synching authorities/bib1.att, ccl.properties, AuthoritiesMarc.pm
with new indexes (UNIMARC too)
* Clean up biblios/bib1.att (remove duplicate att defs)
* Clean up authorities-* templates to conform to new styles
* Fixed search failure when using Default framework (now searches
All)
Also included are several fixes to the built-in SRU server for
Authority and Biblio, it's recommended that you update your
koha-conf.xml file:
* adding explain-authorities.xml and explain-biblios.xml
* adding necessary info to koha-conf.xml to enable SRU/W
* adding several example XSLT stylesheets, that can be used
for SRU on-the-fly transformations (to MODS, DC, RDF, etc.)
Still remaining for 3.0 are the following tasks:
* update MARC21 frameworks (authority and cross-reference bib)
* update display code/templates in authority results list
* update search code/templates to utilize index points
* implement 'grouping' of authtypes for searching (Name, Title, Subject)
* repair utility to import auths and perform matching
* repair bibliographic import to match auths and warn if no match
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This parameter, initialized from LOG_DIR during installation,
allows scripts to specify a common directory for logs.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
* plain 'make' now stages everything to blib, leaving
actual installation to 'make install'
* adjusted rewrite-config.PL and config files
for new subtitution variables
* added default SetEnv Perl5Lib to
koha-httpd.conf
