Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Confirm if you do or do not have 'phone' transports defined in the
message_transports table
2 - Apply patch
3 - Run updatedatabase
4 - If you didn't have them you should now
5 - Run updatedatabase again, confirm it doesn't error
6 - sudo koha-mysql kohadev
7 - DELETE from message_transports WHERE message_transport_type =
'phone'
8 - Run updatedatabase again
9 - Confirm the message transports table is restored
10 - Drop your DB (or reset_all in kohadevbox)
11 - Ensure the table is fully populated including phone notices
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Ensure dependancies are applied
2) Apply this patch
3) Update your CHECKIN notice to match the following:
The following items have been checked in:
----
[% biblio.title %]
----
Thank you.
3) Generate a CHECKIN notice for a patron
4) Note there is no change to the generated notice
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Ensure dependancies are applied
2) Apply this patch
3) Update your CHECKOUT notice to match the following:
The following items have been checked out:
----
[% biblio.title %]
----
Thank you for visiting [% branch.branchname %].
3) Generate a CHECKOUT notice for a patron
4) Note there is not change to the generated notice
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries are paperless and require all payment receipts to be emailed. Koha should give libraries the option to send email receipts if a patron has an email address. If a notice for the type of "credit" exists ( payment or writeoff ), then an email receipt will be sent.
These notices only support Template Toolkit syntax.
Test Plan:
1) Apply this patch and dependencies
2) Add the two new notices, you can find them in installer/data/mysql/en/mandatory/sample_notices.sql
3) Note two new notices exist in the notices editor, ACCOUNT_PAYMENT and ACCOUNT_WRITEOFF
4) Find or create a patron with an email address that owes some amount of money
5) Make a payment for one or more fees
6) Note a new email is queued for the patron
7) Make a writeoff for one or more fees
8) Note a new new email is queued for the patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This bug add update 26 changes.
Update 26
http://www.loc.gov/marc/bibliographic/bdapndxg.html
New subfields 377$3, 380$3, 381$3, 383$3, 730$4
Codes
Map 007/04 'x' new
Map 007/06 'c' renamed
No auth changes
To test:
1) Apply Bug 19835
2) Apply this patch
3) Reload marc21 bibliografic frameworks, check loads ok
4) Clean your browser cache
5) Edit a new bib record, fire 007 plugin,
for Map, 04 position, check new 'x'
for Map, 06 position, check renamed 'c'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In some places - was used insted of --, changed for
consistency with existing descriptions.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This followup updates revison number and date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This followup fixes all repeatability cases, from
updates 23+24+25 and a few older ones.
To test:
0) Apply both patches
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check repeatability...
Bibs and auth frameworks checked against LOC description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There are a bunch of updates, summary below
1) Update 23
1.a) Bibs
New fields: 647 885
New subfields
e in 752
0 in 257 377
3 in 382
4 in 752
Changes
028 redefined
a renamed in 028
b renamed in 046
d renamed in 046
1.b) Auth
New Fields: 075 147 447 547 677 747 885
New Subfields: 0 in 377
2) Update 24
2.a) Bibs
New subfields
b in 567
g in 340
i in 370 386
0 in many fields
2 in 567
3 in 370
4 in 370 386
Changes
g renamed in 370
4 'Relationship code' -> 'Relationship' many fields
4 'Relator code' -> 'Relationship' many fields
2.b) Auth
New subfields
i in 370 386
0 in 050 052 053 055 060 065 070 080 087
3 in 370
4 in 370 386
Changes
g in 370
4 'Relationship code' -> 'Relationship' many fields
4 'Relator code' -> 'Relationship' in 371
3) Update 25
3.a) Bibs
New fields: 758
New subfields
r in 777
u in 777
z in 777
1 in many fields
Changes
d renamed in 111 611 711 811
s repeatable in many fields
3.b) Auth
New subfields
1 in many fields
Changes
d in 111 411 511 711
s repeatable in many fields
For more detail:
Update 23
bibs https://www.loc.gov/marc/up23bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/up23authority/adapndxf.html
Update 24
bibs https://www.loc.gov/marc/up24bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/up24authority/adapndxf.html
Update 25
bibs https://www.loc.gov/marc/bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/authority/adapndxf.html
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Repeatability checks on followup
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The RLIST sample notice is used to send an email to patrons who have
subscribed to be notified when a new issue for a subscription arrives.
This is a feature that is totally independent and not related to the
use of routing lists. In the GUI however, this was misleading so far.
- Rename RLIST to SERIAL_ALERT and fixes the sample notices
- Fix explanations in the helf files
- Fix name of the module in letters from 'serials (routing list)'
to 'serials (new issue)'
Note: There is no logic to be changed as the notice template
to be used is defined for each subscriptions and this is just
the sample notice. I've also opted against a database update, to not
interfere with existing installations, reports etc.
A patch to the manual will be submitted shortly after this passes QA.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When ordering, the bibliographic details contain the title, author,
publisher code, publication year, isbn and series info.
To avoid regression to provide the same behaviour, we will add these
fields to the ACQ framework
NOTE: This patch makes the change only for
- en
- fr / unimarc complet
Other frameworks will be updated before to be pushed, to avoid
unecessary rebases
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are replacing the values -5 or 8 here by 1 for the hidden field in
auth_subfield_structure.
Note that 1 is mainly used in MARC21 and -5 in UNIMARC.
Since it is a boolean, I choose here for keeping 0 and 1.
The value 8 was only used for field 942 in MARC21 files.
The value -5 was replaced in
en/marcflavour/unimarc/mandatory/authorities_normal_unimarc.sql
it-IT/marcflavour/unimarc/necessari/authority_framework.sql
pl-PL/marcflavour/unimarc/mandatory/authorities_normal_unimarc.sql
NOTE: The french unimarc files
fr-FR/marcflavour/unimarc_complet/Obligatoire/autorite_default.sql
fr-FR/marcflavour/unimarc_complet/Obligatoire/autorites_norme_unimarc.sql
fr-FR/marcflavour/unimarc_lecture_pub/Obligatoire/autorites_norme_unimarc.sql
seem to display all fields, since hidden is 0 everywhere.
Test plan:
Test a new install in one of the languages.
Or run the sql script on an empty database.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the upgrade from 2.2 to 3.0 (some time ago already) the table
additionalauthors has been dropped. Unfortunately, a reference to this
table has not been removed from the MARC framework installer files.
This patch clears kohafield for 700$a or 200$g in 32 installer files.
Note: The reference to additionalauthors in field kohafield is silently
ignored in AddBiblio/ModBiblio since the routines _koha_add_biblio,
_koha_add_biblioitem, _koha_modify_biblio and
_koha_modify_biblioitem_nonmarc simply do not use it. You can define a
Koha to MARC mapping for a biblio/biblioitem field but if the field is not
referenced in one of those routines, nothing happens..
Also note that C4::Items::_koha_modify_item does not hardcode all fields
and will respond to a new item mapping.
Test plan:
[1] Run a new install or verify somehow that the change to these sql files
is correct.
The change is a result of: sed -i -e "s/'additionalauthors.author'/''/g"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run a new install with MARC21 and English. This includes the mandatory
file marc21_framework_DEFAULT.sql. Verified that 700$a was inserted
correctly (without additionalauthors).
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the <<biblio.item>> in the email with
<<biblio.title>> and uses CHECKOUT_NOTE instead of PATRON_NOTE.
This patch also adds the notice to
installer/data/mysql/en/mandatory/sample_notices.sql, and updates the
PATRON_NOTE entry in installer/data/mysql/updatedatabase.pl
To test:
1) Apply patch and update database
2) View the message_queue table in mysql
3) Check out an item if haven't already
4) Go to OPAC and set a checkout note for an item
5) View message_queue table and confirm it the title is included in the
email and all instances of 'patron note' have been replaced with
'checkout note'
6) Disable javascript in browser
7) repeat steps 4 and 5 and confirm all works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marjorie Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the acquisition frameworks (frameworkcode=ACQ) for new
installations.
It copies the 952 (MARC21) or 995 (UNIMARC) fields from the default
framework (frameworkcode='')
Test plan:
Create a new installation and make sure the ACQ framework exists.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This added column names, and reformated to be a bit more readable.
This also adds this change to de-DE, es-ES, fr-CA, and nb-NO.
While there was printer_profiles for it-IT, the Italian file seems
to not use the same numbers, and does not visibly look like it needs
these changes.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a bug whereby if you open either of the
Demco label templates (loaded by the sample data) and
click "save" without making any changes you will get an
error:
Can't bless non-reference value at C4/Creators/Profile.pm
line 92.
It also fixes another minor bug in the creator sample data.
To test:
1. Install all sample data in a clean database.
2. In the label tool, edit either of the Demco label templates.
3. Save the template and observe the error mentioned above.
4. Drop and recreate the database.
5. Apply the patch.
6. Repeate steps 1-3 and note the successful save.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the sample item types come with a rental charge of $5.
This is really annoying when you're testing Koha with a fast catalogued
book, since you end up having to write off fines and change the item
type before you can actually get to the testing you want to do.
I left the rental charge on most other items so that you can test
rental charges easily by using a item type other than BOOK or REF.
_TEST PLAN_
Before applying
1) drop your test database
2) create your test database
3) install Koha via the web installer and install all sample data
4) do a checkout
5) note a $5 rental charge
After applying
1) drop your test database
2) create your test database
3) install Koha via the web installer and install all sample data
4) do a checkout
5) note no $5 rental charge
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Applied the patch and looked at the change to the SQL-file. Looks
good. That fine on books has surprised me one too many times! :-)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
These files has been added and emptied in the same patch set (bug 5670).
It does not make sense to keep them.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Apply the patch
1) Install all affected languages: de-DE, es-ES, fr-CA and pl-PL
2) Remove and recreate Koha database
3) Go through web installer in English and don't forgot to load sample Z39.50 servers
4) Go to Administration -> Z39.50/SRU Servers and confirm the sample
servers are here, but columbia.edu is not here
5) Repeat 2-4 for other languages: de-DE, es-ES, fr-CA and pl-PL
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
That breaks randomly tests on Jenkins (Koha/Patrons.t)
It certainly affects data in other languages but I did not find a quick
and easy way to modify this file (replace all guarantorid values with
NULL)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Easy fix
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Tested 3 patches together on current master
- Dropped database
- Recreated database
- Went through installer
- Language en, Marc21
- Installed mandatory data only
- Went through Onboarding tool
- After finishing, logged in as superlibrarian
that was created by onboarding tool
Everything worked fine.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
git grep opac_news.new installer
should not return any occurrences in sql files
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Adds "Dear..."
- Fixes capitalization
- Removes 'E-mail' from the description as you could also have
a print template
To test:
- Make sure the SQL has no errors
- Install the letters and proof read them
If you agree - sign off!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds the new notice ACQORDER to all web installers.
Verify by testing the SQL contains no errors and by running:
perl xt/sample_notices.t
NOTE:
- de-DE is already translated, others are in English.
- xt/sample_notices.t doesn't check fr-CA yet. I didn't fix this here
as the file is missing other notices as well which should be fixed
separately.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Fixes typo "Recieve" in the sample notices
- Adds new notices to it-IT installer
- Turns off feature for existing installations, leaves it
on for new installations
- Fixes typo "cancelation"
- Fixes ids in <body> of new pages
- Adds/fixes classes in th elements of tables
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Article Requests are somewhat similar to holds, but are not requests for
an item to check out. Instead, article requests are requests for a
photocopy of a particular section of a book ( most often ). This is very
common in academic libraries where researchers may request a copy of a
single article found in a journal.
This patch set adds the ability to place article requests in Koha. It
allows the control of what can be requested via the circulation rules.
Since article requests of electronic resources are not outside the realm
of possibility, the feature will check not only the items for
requstability, but the record itself as well ( i.e. both items.itype and
biblio.itemtype ).
Article requests can be placed for patrons from the opac and staff
intranet and can be viewed in most areas where holds are viewed ( e.g.
patron details, record details, etc ).
There is a script to view article requests in progress within the
circulation module. Article requests can be Open ( i.e. new ), In
Processing, Completed, or Canceled. The status of a given request can be
updated from this script.
Test Plan:
1) Apply the patch set
2) Run updatedatabase.pl
3) Enable the system preference ArticleRequests
4) Set up some required fields in:
ArticleRequestsMandatoryFields
ArticleRequestsMandatoryFieldsItemsOnly
ArticleRequestsMandatoryFieldsRecordOnly
5) Edit your circ rules, set article requests to 'yes' for something
6) Test the ability to add an article request from the opac ( required fields enforced )
7) Test the ability to add an article request from the staff interface ( required fields no enforced )
8) Note you can choose item level or record level requests
9) Change the rule to "record only"
10) Repeat 6 and 7
11) Note you cannot choose items
12) Change the rule to "item only"
13) Repeat 6 and 7
14) Note you must choose an item
15) Note that the 'new request' message is queued for each new request
16) Browse to /cgi-bin/koha/circ/article-requests.pl
17) Note requests are split by pickup branch
18) Test slip printing via the "Print slip" action
19) Process request vai "Process request" action
20) Note an email notice is queued for patron
21) Refresh /cgi-bin/koha/circ/article-requests.pl
22) Note request has moved to "processing" tab.
23) Complete request with "Complete request" action
24) Note message is queued for patron
25) Cancel a request, add cancelation note.
26) Note message is queued for patron
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New module to handle management of circulation to Housebound readers.
- Ability to create housebound profiles & scheduled visits for patrons.
- Ability to record users as Deliverers or Choosers (or both), using
extended patron attributes.
- Ability to link choosers and deliverers to individual delivery runs.
- 'Delivery Frequencies' are customizable through authorised
values ('HSBND_FREQ').
* koha-tmpl/intranet-tmpl/prog/en/includes/circ-menu.inc: add
Housebound menu if appropriate.
* Koha/Patron.pm (housebound_profile): New method.
* Koha/Patrons.pm (housebound_choosers, housebound_deliverers): New
methods.
* Koha/Patron/HouseboundProfile.pm: New File.
* Koha/Patron/HouseboundProfiles.pm: New File.
* Koha/Patron/HouseboundVisits.pm: New File.
* Koha/Patron/HouseboundVisit.pm: New File.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: New file.
* members/housebound.pl: New file.
* installer/data/mysql/kohastructure.sql: Add housebound_* tables.
* installer/data/mysql/sysprefs.sql: Add HouseboundModule syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref:
Add HouseboundModule syspref.
* installer/data/mysql/atomicupdate/housebound_tables.sql: New file.
* t/db_dependent/Patron/Borrower_Housebound.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: New file.
Test plan:
- Apply patch.
- Run atomic update script.
- Run Unit Tests (t/db_dependent/Patron/Housebound*)
- Optionally, add additional authorised values to 'HSBND_FREQ'.
- Switch on 'HouseboundModule' syspref.
- Ensure 'ExtendedPatronAttributes syspref is on.
- On patron pages, when editing, add some to the Housebound deliverer
and chooser groups.
- On a patron page, the Housebound menu should now be present.
- create housebound profile
+ ensure Frequency values seem pulled from 'HSBND_FREQ'.
- create 'housebound visits' (deliveries)
+ ensure chooser/deliverer lists are populated with patrons that
have the Chooser or Deliverer Attribute type.
- edit visits.
- delete visits.
- Switch off 'HouseboundModule'
- the Housebound menu should disappear
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [Followup] Rename test files.
* t/db_dependent/Patron/Borrower_Housebound.t: Rename to
t/db_dependent/Patron/Housebound.t.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: Rename to
t/db_dependent/Patron/HouseboundProfiles.t.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: Rename to
t/db_dependent/Patron/HouseboundVisits.t.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [QA Followup] Fix category_type ref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Replace
references to `category_type` with `categorycode`.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This way it will get used for any languages.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Found in
installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch set adds a new table authorised_value_categories to store
authori(s|z)ed value categories into a separate table.
The problematic is explained on bug 15799 comment 4:
We need FK to the AV categories but some may not have authorized values
yet.
What does this patch set:
- Add a new authorised_value_categories table
- Populate it with known categories
- Update FK items_search_fields.authorised_values_category
- Create a new FK marc_subfield_structure.authorised_value (FIXME should
be authorised_value_categories instead)
They are some problems this patch set do not take into account:
- The .sql installer files won't insert correctly (will have to be
updated when this patch set will be ready to be pushed)
- All the categories (even the ones without authorized values defined)
are listed when you edit frameworks (marc_subfield_structure.pl)
- There is no way to delete a category (TODO). But to do so it would be
good to have a authorised_value_categories.is_internal field to mark
some categories as "cannot be deleted".
Test plan:
0/ Execute the DB entry to create and populate the new table and set the FK
1/ Create a new AV category from the admin module (admin/authorised_values.pl)
2/ Add/edit subfield linked to a AV category
(admin/marc_subfield_structure.pl)
3/ You won't be allowed to add AV for branches, itemtypes or cn_source.
They are used internally.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files still use WTHDRAWN instead of WITHDRAWN as an AV
category.
Test plan:
git grep WTHDRAWN installer
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files use COU and LAN instead of COUNTRY and LANG.
To uniformise these AVs, it would be good to use the same code.
Note that I do not think we should update existing installations
Carefully compared code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Mostly fixes bad values in auth files ( '' -> 0 )
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Web install on Ubuntu 16.04/Mysql 5.7 fails.
This patch makes small changes to make installation
possible to kohastructure.sql and some sample files.
Sample values for quotes table can't have '0000-00-00 ...' values
nor NULL values, now() is perhaps an option.
Depends on Bug 16572
To test:
1) System with MySQL 5.7, for example Ubuntu 16.05
2) Apply 16572
3) Try web install, it fails
4) Apply this and next patch
5) Try again, now it succeed
This is only for English install, i18n files needs revision
I can do that if this is accepted.
Perphaps a change is needed to updatedatabase.pl
Ammended patch, 'created_on' field on virtualshelves
can't be timestamp default null, mysql 5.5 complains
that only one timestamp column can be defined as
default not null. Changed to 'datetime' type.
Can provide followup with updatedabase change,
but need an opinion if this type change makes sense.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
followup to previous patch.
This patch fixes linkid value. It was set to '', but
declared as tinyint.
Mysql < 5.7 replaced this with nearest right value, i.e 0
Mysql 5.7 gives error here.
Also some normalization, all lines with data begins with two tabs
To test:
On top of Bug 16572 and previous patch
1) Run webinstaller
2) Add mandatory values
3) There must be no problems on MySQL 5.7
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Alternative POC solution, on top of
previous patches, feel free to obsolte.
This patch use DBIx::RunSQL->run_sql_file
to procees each sql file.
To test:
1) Apply all patches
2) Same test plan of patch 1
Timing test running web installer, marc21,
all sample data, time in seconds
a) without patch
structure data
59.7 66.5
58.6 66.0
b) SQL::SplitStatement (patch 1+2)
59.4 101
59.7 102
c) DBIx::RunSQL (patch 3)
60.7 66.8
59.4 66.2
Tomas' version is a bit slower loading sample data,
all give similar results processing kohastructure.
New dependency to package: DBIx::RunSQL
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Update No. 22
Bibliographic
New 382$r, 382$t, 753$0, 753$2
Modified 382$e
Authority
New 382$r, 382$t
Modified 382$e
Also added final 'S' on 654 description
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
For comparison:
https://www.loc.gov/marc/bibliographic/bdapndxg.htmlhttps://www.loc.gov/marc/authority/adapndxf.html
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When doing a hacked install off the master branch:
use ... {koha database name}
truncate creator_layouts;
truncate creator_templates;
truncate printers_profiles;
source installer/data/mysql/... {name of a sample_labels type file}
Warnings are generated, which may not be visible in the UI.
Most of the warnings were triggered by:
-/*!40000 ALTER TABLE `creator_layouts` DISABLE KEYS */;
-/*!40000 ALTER TABLE `creator_layouts` ENABLE KEYS */;
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_er_illegal_ha
In the Russian, the layout_name was truncated, because the layout_name was only 20. An atomic update sql and kohastructure.sql update were provided to widen it to 25.
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_warn_data_truncated
Also fr-FR, ru-RU, and uk-UA were slightly different in structure, so the structure was made the same as the other files.
See comment #1 for the test plan.
NOTE: pl-PL is likely very out of date, but is not affected in this regard.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no more warnings
mysql> show warnings;
Empty set (0.01 sec)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some installer files still refer to password_allowed.
The print statement of the db revision has been slightly adjusted.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch updates the sql installer files for new installations.
Occurrences to the three plugins marc21_field_003, 040c and 040d are
replaced by marc21_orgcode.pl.
This has been generated by one sed statement.
Test plan:
[1] Run a new installation or run some of the changed sql files manually.
[2] Verify that marc21_orgcode is linked to fields previously linked to
the three old plugins.
[3] Do a git grep on the three plugin file names. No occurrences expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Have tested the three english sql files:
authorities_normal_marc21.sql: 18 rows with marc21_orgcode (003 and 040a
for 9 auth codes)
marc21_framework_DEFAULT.sql: 1 row with marc21_orgcode (003) -- this patch
does not add them to 040c or 040d; no behavior change..
marc21_simple_bib_frameworks.sql: 8 rows (003 for 8 frameworks)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The following files do no longer need an adjustment:
installer/data/mysql/de-DE/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/es-ES/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
installer/data/mysql/it-IT/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
For details, check Bug 15097: Update MARC21 de-DE frameworks to Update 21.
And similar reports for es-ES and it-IT.
Verified this change by installing de-DE in the webinstaller. The plugin for
field 003 was correctly set to marc21_orgcode.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Apply patch
2) Run updatedatabase.pl
3) Go to advanced search in Staff Client (ie /cgi-bin/koha/catalogue/search.pl)
4) Confirm that it says 'Non-fiction' in the 'Any content' drop-down menu under 'Subtype limits'
5) Go to item search (ie /cgi-bin/koha/catalogue/itemsearch.pl)
6) Confirm that it says 'Non-fiction' under 'Collection code'
7) Go to advanced search in OPAC (ie /cgi-bin/koha/opac-search.pl) and click 'More options'
8) Confirm that it says 'Non-fiction' in the 'Content' drop-down menu
9) Go to the details page for a non-fiction book in the OPAC (ie /cgi-bin/koha/opac-detail.pl?biblionumber=2) and click 'Holdings' tab
10) Confirm that it says 'Non-fiction' under 'Collection' heading
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
It's a bit confusing to have RESERVESLIP named "Hold Slip", we should
finish the job and recode the slip.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Try printing a hold slip, you should note no difference
from pre-patch behavior
Followed test plan. The slip is triggered if you want to check out
an item that is reserved / on hold for another patron. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes all occurrences of 'Reserve slip'
to 'Hold slip' in the sample notices files and
in one of the system preferences.
To test:
- Make sure the sample_notices.sql are correctly
changed.
- Verify the description of the SlipCSS system
preference has been changed correctly.
Checked the working in system preferences and re-loaded notices from the
updated English sample notices SQL. Changes look correct.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch simply renames fast add sql file in order
to load this file before default framework.
To test:
1) Do a marc21 install (de,en,es,it)
load all sample files
check Fast Add framework is empty (no fields/subfields)
2) Apply the patch
3) Do an install again, this time FastAdd must have values.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Changes budget to fund in all TO_PROCESS notices but the
German sample file.
The German sample file will be dealt with in a separate patch.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds some sample values for the SUGGEST_FORMAT
authorized value list for new installations.
To test
-------
[1] Verify that the new SQL inserts added by this patch work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch only put in its own line inserted values.
This is necessary in order to translate this files.
To test:
1) Just check that files load normally.
http://bugs.koha-community.org/show_bug.cgi?id=14333
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes same labels on bibliographic and
authority frameworks, and one typo.
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check fixed labels
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Default frameworks updated to update 20 (April 2015) and
21 (September 2015)
Update No. 20
Bibliographic
New field 884
New subfields 037$3, 037$5 and 382$e
Authority
New field 884
New subfields 046$q, 046$r and 382$e
Update No. 21
Bibliographic
New tag 348
New subfields 336$0, 337$0 and 338$0
Authority
New field 348
New sufields 336$0 and 670$w
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes tab location for FA frameworks.
Not all subfields belongs to tab 0.
To test:
1) On current master, with default and fasadd fw loaded,
go to Home > Administration > MARC bibliographic framework test
it fails
2) Apply the patch
3) Delete all fw, reload all, or just default (bib & auth) and
fast add
4) Repeat 1, now test must pass
This is only on master, so no need to database update.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. MARC bibliographic framework test passed Ok.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
ERROR 1136 (21S01) at line 6: Column count doesn't match value count at row 1
Test Plan:
1) Start fresh install
2) Install all test data
3) Note the SQL error
4) Apply this patch
5) Repeat steps 1 and 2
6) Note no error
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All fixed files loads without problem.
No errors found
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 10020 has removed these columns, the should be removed from the
patron sample file.
Test plan:
Insert the files updated by this patch into a fresh DB, you shouldn't
get any error.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Before applying the patch, I was able to notice the error when loading the
patron sample SQL file to a DB. With the patch, it's solved.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move the 2 specific 'en' files outside of the language directory.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- remove DateTime->now()
- use Koha::DateUtils->dt_from_string;
- use Pod2usage for the usage
- use Modern::Perl
- use branches table
- Change letter code from MEMEXP to MEMBERSHIP_EXPIRY
- review comments implemented
- fix qa script comments
Bug 6810 - Fix QA failures
- MembershipExpiryDaysNotice system preferences arragned alphabetical order.
Bug 6810 - Add sample notices
- review comments implemented
- default value of is_html field in letter table is 0
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a security issue in the self checkout module.
The user used to check items out must have the circulate =>
circulate_remaining_permissions permissions.
So even if a user does not have a login/password or a barcode he cans
access to the circulation module of the intranet.
Imagine if the sco patron used is a superlibrarian...
This patch set will change the behavior and adds a new permission to
access to the sco module (circulate => self_checkout).
This permission should be the only one defined for this patron.
IMPORTANT NOTE: Hopefully, this only works if both interfaces use the
same domains (but different ports).
Test plan:
0/ Does not apply this patch set
1/ Create a patron with the circulate => circulate_remaining_permissions
and some others. Note his userid/pwd (later 'sco/sco').
Turn on WebBasedSelfCheck and AutoSelfCheckAllowed
Fill the AutoSelfCheckID and AutoSelfCheckPass wich 'sco' and 'sco'
2/ Log you out from the OPAC and the intranet
3/ Go on the sco page
4/ Note that your are automatically logged in
5/ Go on the circulation module on the intranet side
6/ Oops
7/ Apply this patch
8/ Execute the updatedatabase
9/ Note that the sco user only has the new permission circulate =>
self_checkout, others have been removed
10/ Try to reproduce the issue, it should not access anything on the
intranet side
11/ Confirm that there is no regression in the sco module
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works well no regressions, changes the permissions appropriately.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 1/9
This patch modifies Fast Add framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch reverts old hidden values to marc_subfield_structure.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 9/9
This patch rewrites SER framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 8/9
This patch rewrites IR framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 7/9
This patch rewrites KT framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 6/9
This patch rewrites AR framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 5/9
This patch rewrites VR framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 4/9
This patch rewrites SR framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 3/9
This patch rewrites CF framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 2/9
This patch rewrites BKS framework
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test
---------
1) Apply the patch
2) Export some MARC bibliographic records from Koha
3) Import those same MARC bibliographic records using the
"ISSN(022$a)" record matching rule.
4) The incoming records should match perfectly
5) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
For new Koha installation
1) create the koha database
2) Go to the staff client page, and do a "fresh" install making
sure to select lots of optional marc 21 matching rules so
the .../marc21/optional/marc21_default_matching_rules.sql
gets triggered.
3) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
Bug 14472 - Added Atomic Update to fix wrong issn search index
- Fix comments
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add the new notice suggestion > TO_PROCESS
Others will be added when the patch will be signed off.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Followup expected :-) It would be nice also to have an updatabase.pl entry to
insert the new TO_PROCESS notification.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Improves formatting and wording as suggested by
Nicole on bug 14249.
To test:
- Activate UseDischarge
- Request a discharge from a patron account in the OPAC
- Confirm discharge from the start page of the staff
interface
- Download PDF from the patron account in the OPAC
- Verify the displayed text is formatted and reads
correctly
06/06/2015 15:18
Discharge confirmation
Midway certifies that the following borrower:
Firstname surname (cardnumber: 1)
has returned all items.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Messages is Ok, no errors
I think you cant modify message using embeded CSS,
html -> pdf procedure ignores CSS.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Removes the Smithsonian as a target installed with the
sample data during installation.
Also adds the newer LOC authority targets to files where
they were missing.
To test:
- Verify the Smithsonian has been removed from all
translated installers
- Verify the files are still valid SQL and install
correctly
NOTE: There was tiny scope creep which included ensuring
there were two Authority z39.50 servers as well.
Text files properly reflect the removal.
SQL 'source' of SQL files worked properly.
Was able to Z39.50 search for all of the 'en'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The borrow permission was used but uselessly.
For instance, at the opac, the flagsrequired parameter was set to
'borrow' but the 'authnotrequired' was set also (which means no auth
required).
At the end, this permission was used at only 1 place: for the basket,
intranet side.
This can be replaced with the catalogue permission (which is used to
search).
Test plan:
1/ Confirm that you are able to show/download/sent the cart (intranet side)
with the catalogue permission.
2/ At the OPAC, you should be able to access the same pages as before
with any other permissions.
Concretely it is quite difficult to test this patch, you should have a
look at the code.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- syspref useDischarge
- the new table discharges
- the discharge notice
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Summary of changes:
1) Bibliographic
- Added fields 370 and 388
- 382s is non repeatable
- $g added to 650 and 651
- $g now repeatable on 100,110,111,130,240,243,246,247,
600,610,611,630,700,710,711,730,800,810,811 and 830
2) Authority
- Added field 388
- New $g on 150,151,450,451,550,551,750 and 751
- New $i on 700,710,711,730,748,750,751,755,762,780,781,782 and 785
- New $4 on 700,710,711,730,748,750,751,755,762,780,781,782,785 and 788
- $g now repeatable on 100,110,111,130,400,410,411,430,500,
510,511,530,700,710,711 and 730
This patch updates MARC21 frameworks to Update No. 19 (October 2014)
Also updates values on database for MARC21 installs.
To test
1. Apply the patch
2. Run updatedatbase.pl, check that runs without error
3. Remove default frameworks, bibliographic and authorities (all of them),
load again. Check that both files load without errors.
4. Verify changes
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fastadd framework ist missing a 100$a subfield, it has two 100$c instead.
This patch corrects English, German, Italian and Spanish .sql files.
Italian and Spanish need translations for the field name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested running all sql files manually.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
(This will completely done when the patch will be QAed)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch inserts the new notification template into the letters table.
It also add the insert statements into the language specific files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Amended patch: Add the kohastructure.sql changes
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch removes the 'isUrl' attribute from all 240$a fields in the various
frameworks. The change removes the broken link from the staff detail
MARC tab view.
Changes are a little easier to spot with: git diff --color-words HEAD^
To test:
- Load some or all of the frameworks
- Verify that 240$a is no longer marked as being an URL
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
942$e is mapped to biblioitems.cn_edition, which doesn't exist and
to an authorized value CN_EDITION, which doesn't exist either.
Patch removes the wrong mapping and non-existing auth value from
the frameworks.
To test:
- git diff --color-words HEAD^ is helpful
- Check all mappings are changed and SQL is still valid
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Adds translations for new permissions
- Adds ISO code to the sample currencies
- Removes a comment line about branchrelations from
sample_libraries (en)
To test:
- Run the German web installer with all sample data
selected
- Verify it runs without problems
- If you speak German - verify the translations make sense
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
No errors from the web installer. I verified that all the changes I saw
in the diff appeared correctly in the permissions. Currencies all
appeared to be correct after installation. Translations appeared to be
very German-looking.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The feed message transport type exists but nobody knows how it can be
used. This patch assumes nobody uses it and removes it.
Before removing the entry in the DB, the updatedb entry will check if no
foreign key exists in order to avoid a delete in cascade.
This path does *not* deletes the occurrences in the templates.
Test plan:
Apply this patch, execute the updatedb script and verify the
message_transport_types table does not contain the 'feed' entry if it was not
in use.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch will remove the confusing option to configure message texts for feeds.
Checked on a database with an existing feed type notice (not deleted) and
on one without any references to the feed message transport type (deleted!)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Updates the en permission file and adds a database
update to fix the permisson.
The update is done using the description, to not
untranslate non-English permission descriptions.
To test:
- Run the database update on your existing installation
and check the typo is gone
- Run the web installer and check there are no errors
and permissions are loaded correctly (and without typos)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates MARC21 frameworks to Update No. 18 (April 2014)
Also updates values on database for MARC21 installs.
To test
1. Apply the patch
2. Run updatedatbase.pl, check that runs without error
3. Remove default framework, load again. Check that loads without
error.
4. Verify changes
Bibs
007/04 Sound recording -> q Quadraphonic, multichannel, or surround
347f -> Encoded bitrate
110/1,610/1,710/1,810/1 subfield c -> repeatable
Auth
110/1,410/1,510/1,710/1 subfield c -> repeatable
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Checked changes are according to documentation from LOC and
consistent between sample files and updatedatabase.pl.
No problems found, all English frameworks were updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add LOC SRU server to sample servers installed.
This patch modifies four language files: de, en, es and nb.
For the other languages this may not be useful.
Test plan:
You could test this by using the webinstaller.
But you could also (backup) and delete your records in z3950servers, and
run the sample_z3950_servers.sql file from the command line.
Check if you see the new SRU server.
Tested using mysql. I truncated the table (to reset the IDs as well) and then ran the file. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames name to servername and type to servertype.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all sql files by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Corrects the German translation for 'Laotisch'
- Adds an icon to the reference item type
- Corrects capitalization for user permissions
To test:
- Run English web installer, make sure to select
the sample item types and all mandatory data
- Check user permissions appear correctly
- Check icon for REF itemtype is shown correctly
- Check that languages in Advanced Search appear
as normal
- Install German and check in language list on
advanced search 'Laotisch' now appears
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well following test plan.
No errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch converts the HOLD_PRINT notice to a HOLD notice
with a message transport type of 'print'.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's SIP2 server implementation does not currently support the SIP2
protocol field "media type" ( CK ).
This patch implements the SIP2 media type by allowing an arbitrary
mapping of itemtypes to SIP2 media types.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Edit an itemtype, select a SIP media type, and save the changes
4) Make a SIP2 Item Information Request
5) Verify that the CK field of the Item Information Response contains
the correct media type code.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds notices SHARE_INVITE and SHARE_ACCEPT in updatedatabase and
sample_notices.
Test plan:
Install or upgrade and verify that you have the new notice under Tools.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"Fines and fees" is consistent with the description of the
main "updatecharges" permission; in some areas, "charges" by itself
can refer to loans, not fees.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Rephrases permission description a bit to make it clearer and easier to
translate.
Adds German descriptions as requested by katrin.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and all tests.
Tested with various permission combinations:
- superlibrarian
- updatecharges (full permission)
- only 'remaining permissions for updating charges'
It works as expected.
Note: I think we need a follow up to include the
'Forgive overdue charges' checkbox on the check in page
in the new permission.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds new sub-permissions to updatecharges, 'writeoff' for writing off
fees and 'remaining_permissions' for all other fee related activites.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Remove the 'writeoff' permission from your privileges
4) Attempt to write off a fee, you should not be able to
5) Re-add the 'writeoff' permission
6) Attempt to write off a fee, you should now be able to do so
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some files had truncate. Some files had foreign key checks.
Other files had foreign key checks disabled. Some files gave
the column names expressly, and others assumed the fields in
a particular order. Everything was modified to:
- not truncate
- not say utf8 (because it should already be by default)
- not disable foreign key checks (because it should work)
- expressly name the fields (adding fields shouldn't break it)
TEST PLAN
---------
0) Backup opac_news if you care about your news.
1) open mysql client
2) use the koha database
3) Run the following script
TRUNCATE opac_news;
source ~/kohaclone/installer/data/mysql/uk-UA/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/it-IT/necessari/sample_news.sql
source ~/kohaclone/installer/data/mysql/de-DE/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/nb-NO/2-Valgfritt/sample_news.sql
source ~/kohaclone/installer/data/mysql/en/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/pl-PL/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/es-ES/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/ru-RU/optional/sample_news.sql
source ~/kohaclone/installer/data/mysql/fr-FR/2-Optionel/sample_news.sql
- Were there errors?
- Did everything add nicely?
- Not likely, by expressly stating the idnew field, the news
items in some files would not be added.
4) apply patch
5) try running the script again
- Were there errors?
- Did everything add nicely?
6) Log into the staff client
7) Tools->News
- Do you see the news items added?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much needed clean up, making for much more robust and less error prone
sql
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch offers a better default for currencies,
with USA dollar as default active currency.
To test the patch:
1)Install master without the patch, during web installation
select 'parameters.sql' file
2)Finish install and go to Administration -Currencies & Exchange rates
3)No active currency
4)Install master with this patch, during web installation
select 'parameters.sql' file
5)Finish install and go to Administration -Currencies & Exchange rates
6)Now USA dollar is the active currency
NOTE: This does solve the problem of everything being NULL for active,
and lacking an active value. It also corrects the description
of the optional item to check related to currencies.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fix Armenian language description
To test:
1) Do a fake translation to Armenian,
mkdir koha-tmpl/intranet-tmpl/prog/hy-Armn
2) Go to Administration > System preferences > I18N/L10N
3) Armenian description looks like the second string in Bug description
4) Apply the patch
5) Run updatedatabase.pl
6) Reload page, now description look as first string in
Bug description (it's the sixth letter, similar to 't')
Ammended patch, wrong column.
Signed-off-by: Holger Meißner <h.meissner.82@web.de>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch fixes the English sample file for translations and includes
a database update to correct the string in existing installations.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
At present, the QueryParser search mode expects that search field names
and aliases are case-sensitive. This may change (see bug 11353), but
for now, this patch ensures that the local-number searches used by
the KohaBiblio rule will work regardless of the value of the
UseQueryParser system preference.
To test:
[1] Use the KohaBiblio 999$c matching rule with UseQueryParser both
on and off. Verify that matching by biblionumber works correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a default record matching rule for biblionumber
using the 999$c and the Local-Number index.
This is part of the optional marc21 SQL, as well as in the
updatabase.pl script.
TEST PLAN
---------
1) Apply the SQL for adding the KohaBiblio matching rule.
2) Run updatedatabase.pl
3) Export some MARC bibliographic records from Koha
4) Import those same MARC bibliographic records using the
"KohaBiblio" record matching rule.
5) The incoming records should match perfectly
6) Check the mysql tables (marc_matchers, matchpoints,
matcher_matchpoints, matchpoint_components,
matchpoint_component_norms) to make sure the values were
inserted as expected.
Optional: install a new Koha MARC21 database from scratch and
ensure that the sample matching rules are loaded. Add at
least one bib record, and try steps 1-6.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Dropped the database update from the original patch, as the matching
rules are not at present mandatory during installation.
This patch updates default EN UNIMARC bibliographic framework
I used the 2008 version of the UNIMARC bibliographic manual,
and added updates listed on official site.
There are new fields/subfields, those added are hidden by
default.
There are some description changes, and also a lot of
changes to repeatable and mandatory values.
To test:
a) Functional
1) Remove all bibliographic frameworks
2) Load new file unimarc_framework_DEFAULT.sql
3) Check that it load without errors
b) Correctness
1) Take a time and verify that all new
fields/subfileds are correct
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Huge patch, lots of additions and corrections.
To view the changes git diff --color-words HEAD^ is helpful.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixes one missing for 951 field description in the Default framework.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tries to make MARC21 bibliographic frameworks
internally consistent. It modifies field/subfield descriptions
of simple_bib and fastadd frameworks to match corresponding
ones of default framework.
To test:
1) Download and edit the attached script, check-diff.sh
Put on it user, pass and database name of your dev install
Copy the script on your git home
2) Run the script (bash check-diff.sh).
WARNING: the script removes bibliographic frameworks, and load
default, simple_bib and fastadd ones.
It will show on screen, and write on file differences.txt,
any difference on field/subfield description (liblibrarian)
between any framework and default
On master it will show a lot of lines
3) Apply the patch
4) Run the script again. Frameworks files must load without problem.
There will be no differences
NOTE: There are many "space" changes. The reason
to that is to format files to ease the translation process.
Not related with this bug, but necessary.
Also a few changes on default framework.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I ran some tests and found one more case where the
liblibrarian and libopac columns had slightly different
descriptions, adding a follow-up for that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Part of the patch for bug 11260 had the effect of undoing
commit 5aae737, thereby adding back two undesirable things:
- use of backticks in the SQL
- setting z3950servers.id explicitly
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After some discussion in IRC I am throwing in some changes for the
English sample frequencies:
- Change Vol to Vol.
- Change No to No.
We had both forms in the file, now it should be consistent.
To test:
- Run English web installer installing all sample files, especially
frequencies
- Check installed frequencies
- Check available options creating a subscription
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory:
- adds auth_values.sql and .txt with YES_NO referenced in patron_attributes.sql
- updates sample notices with redone slip templates (ISSUESLIP, ISSUEQSLIP,
RESERVSLIP, TRANSFERSLIP)
- adds German translations to subtag_registry.sql and copies updated file
from en to de-DE
- adds translation for new course_reserves permission to userflags.sql
- adds translations for new permissions in userpermissions.sql
- Fixes typo IndependantBranches in English userpermissions.sql
Optional:
- adds csv_profiles.sql and translation of the serial claims profile
- adds z39.50 servers for authorities to sample_z3950_servers.sql
To test:
- Run web installer in English
- check all sample files, make sure they all install without SQL errors
- check language list on advanced search displays correctly still
- check area/language list on tools > news displays correctly still
- check permissions for correct spelling of IndependentBranches
- Run web installer in German
- repeat checks from above
- also check: authorised values, especially existence of YES_NO
- all permissions are translated now
- slip notices are all there and look right
- new z39.50 servers for authorities are available
- csv profile for serial claims is available and works as expected
... and anything else you can think of.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In connection to bug 4246, commit 591bae324 added
phone to the message_transport_types table in updatedatabase.pl
This should be done also for new installs via the .sql files of the web
installer.
I am adding it only to English now, basing this change upon the work in
reports 10509 and 10520. (I discovered this tiny omission there too.)
Test plan:
Apply patches 10509/10520.
Run new install or run this particular sql file from command line.
Note: If you only run this particular file, you do not need patch 10509.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: David Noe <drnoe@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes permission description in en and untranslated
installer files.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- adjust description of the default profile
- adjust description of the sample data SQL
- adjust description of the download link
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Create a CSV profile (or use the default one) with a type 'sql'.
- Go to serials/claims.pl, select the wanted CSV profile and click on
the "Export selected items data".
- Verify the CSV file is correctly generated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
On top of 10853 (solving merge conflict)
Need to do homework to test. Add subscription and serial claim
notice.
1) Create a new CSV profile, type SQL, copy sample fields
2) Go to claims, select vendor
3) Go to Export selected items with created profile
4) CSV (in my case I use | as separator) download successfully
5) All fields present, file correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as advertised, keeps existing format by porting it to
a SQL profile.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The LC NAF and SAF authority Z39.50 database are indeed production
services, so we may as well showcase the new authority Z39.50 search
functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10513 added two columns to table itemtypes,
but sample_itemtypes can't be loaded because
it relies on old structure.
This patch rewrites sample_itemtypes.sql, stating
explicitly columns, removing backticks and consolidates
all in one insertion.
To test:
1) On master with current DB structure, delete item types
2) try loading sample_itemtyes.sql
It fails with "ERROR 1136 (21S01) at line 1: Column count doesn't match value count at row 1"
3) apply patch
4) try again, this time it will load and itemtypes created
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only.
Tested by running the web installer on an empty database.
All sample data loads without errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch deletes information for default
MARC21 auth framework on tags 68a and 68b.
Also added update for current installs.
RM note: The 68a and 68b fields were defined in an attempt to include
both MARC21 classification and MARC21 authority records in the same
default framework, but I don't think this has turned out to be useful,
as to my knowledge nobody tries to use MARC21 classification records
in Koha, and if one were to want to, a distinct record type (or at
least auth_type) would be a better way to do it.
To test with current authorities_normal_marc21.sql loaded
1) apply the patch
2) run updatedatabase
3) check on database that there are no more
references to tags 68a and 68b
To test for new installs
1) remove auth frameworks
2) load authorities_normal_marc21.sql
3) check that load without problem
4) check on database that there are no more
references to tags 68a and 68b
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.
Test plan:
Run the file or do a new install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.
To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Instead of inserting followed by deleting, this patch combines the two where
clauses of both sql statements, meanwhile leaving the separation intact.
As suggested by Galen, removed all 162's from the non-default types.
The 162 calls for a new authority type. We can add that later on.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran this .sql script after deleting all auth records.
The former version had 9 types, 1148 tags and 11621 subfields.
This one has 9 types, 1140 tags and 11597 subfields.
That is expected: 8 tags 162 less and 8x3 subfields less.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As proposed by the report creator, this patch
rewites authorities_normal_marc21.sql
using default authority framework to build all
current authtypes, then deleting irrelevant tags.
It also updates default authority framework
to last update (April 2013) adding new or
updated tags/subtags.
All new tags/subtags from Bug 9826 and this
one are included in all authtypes.
Deleted tags reflect current situation except
for 7XX tags thatl must be present for all authtypes.
Only for new installs
To test:
1) Apply patch
2) Delete all authtypes
exec in database
delete from auth_types;
delete from auth_tag_structure;
delete from auth_subfield_structure;
3) Insert new auth framework
4) Verify absent tags. This can be done running
select tagfield as from auth_tag_structure
where authtypecode ='' and tagfield not in
(select tagfield from auth_tag_structure
where authtypecode = 'AUTH_TYPE')
for each authtype ( UNIF_TITLE, TOPIC_TERM, etc.)
The attached PDF could be used as a reference,
all that is white or green for each authtype must be
in the list (except for white 7XX tags)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
An insert statement should contain the column names to avoid confusion and
future problems with table definition changes.
This patch updates the English userflags.sql.
Will send updates for the other languages in connection with replacing inserts
by updates for the additional languages (where possible). For userflags this
will be possible.
Test plan:
Do an install (English).
Or -- as a dangerous(!) alternative--:
Do this ONLY on a restorable database.
Delete all records in userflags. (Note: This cascades to permissions a.o.)
Run this file from command line.
Check if you have records again in userflags. (You also messed up your Koha.)
Restore your database.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested both ways myself :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors.
Tested using second alternative
Just a note: if you update other lang files replacing INSERTs for UPDATEs
then you must install using EN and later apply lang files by hand.
If you do a translate first before webinstaller, and finish your install
in your lang, then that kind of file will fail.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
mysql> create database test;
Query OK, 1 row affected (0.00 sec)
% mysql -u koha -p test < installer/data/mysql/kohastructure.sql
% mysql -u koha -p test < installer/data/mysql/en/mandatory/userflags.sql
mysql> select count(*) from userflags;
+----------+
| count(*) |
+----------+
| 19 |
+----------+
1 row in set (0.00 sec)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates MARC21 authority framework adding
missing tags/subtags up to Update No. 15 (September 2012)
Missing tags and corresponding subtags only added to
default authority framework.
For present authtypes only missing subtags are added.
Also updates a few legends to match those from LOC.
No deletions except for a few not relevant tags in
present authtypes without subfields.
Only to new installs.
To test:
1) Delete present authority frameworks
2) Load new frameworks. On default there are
many new tags/subtags. On present authtypes
only a few new/renamed subtags.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
Sorry, this followup fulfills K. Fischer request to
base de-DE file in english one.
The differences are small corrections and added languages.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Simply add catalan language.
No translation yet, so can't be really tested.
But it will come soon.
Until then, to test:
1) cp misc/translator/po/es-ES* to ca-ES*
2) do perl translate install ca-ES,
3) apply the patch
4) run updatedatabase.pl
5) enable language and display on system preferences.
6) check labels
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to current master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds missing subfields on MARC fields
029abct
(http://www.oclc.org/bibformats/en/0xx/029.shtm)
863abcdefghijklmnopqstvwxz68 (same for 864/5)
(http://www.loc.gov/marc/holdings/hd863865.html)
To test:
1) dev master system with default and example MARC21 frameworks
2) Go to Home > Administration > MARC frameworks
3) Click on 'MARC structure' of any framework
4) Search for tag 029 (or 863/4/5)
5) Click 'Subfields', there are none.
6) Apply the patch
7) Replace old frameworks, easiest by command line:
mysql -uuser -ppass kohadb -e 'delete from biblio_framework; delete from marc_tag_structure; delete from marc_subfield_structure'
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
mysql -uuser -ppass kohadb < installer/data/mysql/en/marcflavour/marc21/optional/marc21_simple_bib_frameworks.sql
8) Repeat steps 2-4
9) Click 'Subfields', now they are.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated frameworks are ok.
Note: Only en frameworks are updated, so if other languages need
those fields too, we need some followups.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
first, replicate:
go to More -> permissions on any user. Notice that it says various things "privileges, flags, permissions" they are interchangeable and inconsistent.
also note that some of the permissions are nonsensical and/or not descriptive enough, or not using canonical terminology (borrowers instead of patrons, for example)
To test:
interface consistency changes
-> means "turns into"
- page title - privileges -> permissions
- breadcrumbs - privileges -> permissions
- headings - privileges -> permissions
- "set flags" button -> save
Permissions that have changed description:
- Catalogue changes to "Required for staff login" in bold (this was the original impetus for this boatload of changes)
- reports
- editauthorities
- management
- serials
- updatecharges
- circulate
- parameters
- borrowers
- tools
- staffaccess
- edit_patrons (only on updatedb, not on new db)
- Read through and make sure there are no typos, and that the descriptions seem to jive with what privileges the permission gives the user. Suggestions are, in fact, welcome.
- If you are feeling ambitious, go ahead and create a new, clean database and check the wording there as well - it should match what has been done in the db update.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested both with existing database and new database
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Tested with existing database. Introduces no new mysql-isms.
Kudos for adding that syspref in bold, that got me when I first started with Koha
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch updates the seed data from the target list at
http://www.loc.gov/z3950/lcserver.html#addr.
Comment: new target works. updated deleting and reloading
sample targets.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
I agree with Galen that this may need to be incorproated as a follow-up
for current installations. Works fine for new installs
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Fix two different errors that prevented sample notices
from being loaded into a fresh English Koha database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Hugh Davenport <hugh@davenport.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
English sample_notices.sql installs correctly after this
patch is applied. Web installer completes without any errors.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
To test:
Option 1) Run the English and German web installer and check authorised values
have been added correctly.
Option 2) Run SQL code from auth_val.sql for German and English against your
database and check the authorised values have been added correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In table language_descriptions a lot of translations are missing (with the exception of French)
Additions need to be added to subtag_registry.sql (for new installs) and to updatedatabase.pl (for upgrading).
This Bug could be used as 'omnibus' for follow ups for other languages.
This patch adds German (and some missing French) translations.
Tested updatedatabase.pl
Would appreciate if somebody could test subtag_registry.sql.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested both, the updatedatabase and the sql file. Works well.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected some information about the provided sample data and corrected
text files to obey capitalization rules.
To test:
I suggest taking a look at the patch file and also taking a look at the
English web installer, checking if it works, if there are typos or wrong
information.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Broken Z39.50 targets were removed with patch for bug 3782, but are still
mentioned in the text files.
This patch corrects that mistake.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Removes NYPL and NYU from the list of sample z39.50 servers, because
they don't work or only work inconsistently.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Right now if you were to link a field in an authority to a thesaurus, it
would not work properly. The authority type frameworks require some
adjustments to allow see also headings to be linked to thesauri (such as
adding subfield $9).
This patch adds subfield $9 and thesaurus links to existing installs
for those 5xx fields (under MARC21 and NORMARC only) which do not yet
have any subfield $9 or thesauri configured, as well as adding that to
new English language installs. There will be a follow-up patch adding
the subfields to new non-English language install files later, once
it is clear that the changes proposed and demonstrated in the English
files are accepable to the community.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested frameworks install cleanly on a new installation.
Tested database update and made sure, that configuration and subfields
of a field were not changed if
- a $9 subfield already existed for a 5xx field
- a $9 subfield and a link to another thesaurus in $a existed
- no $9 but a link to another thesaurus in $a existed
This seems safe to me.
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Removes the '0' values without description from the sample date for
authorised values.
To test:
1) Verify that SQL files load correctly
- truncate authorised_values; /* empty authorised values table */
- load sample data using one of the SQL files
2) Check cataloging interface - all status fields should only show 1 empty line
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
Database update
- existing mapping
- no pre existing mapping
Frameworks
PROBLEM: some languages are still missing, I think only untranslated
frameworks are included in this patch.
Acquisition
- created a new order with edition filled out
- checked edition was saved to the correct field in cataloguing
- modified edition and checked display in acquisition
- edition also displays on basket summary page
http://bugs.koha-community.org/show_bug.cgi?id=7280
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
August 10,2011: Tested install and upgrade.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
January 28, 2012: Removed untranslated non-en SQL relator term files.
Fixes sample data. All patrons should always have an expiry date.
To test:
Load sample patron data and check that all patrons have an expiry date.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
A frequently-requested feature for Koha, especially by special libraries, is
the ability to upload local cover images into Koha.
This patch adds a bibliocoverimage table, and image handling code in the
C4::Images module. Key features of the implementation include:
1. The ability to have multiple cover images for a biblio
2. Handling for "full size" (800x600) and thumbnail-size (200x140) images
3. Uploading images directly from the record view
The image display functionality by Koustubha Kale of Anant Corporation will
follow in a second patch.
Special thanks to Koustubha Kale and Anant Corporation for the initial
implementation of local cover images, and to Chris Nighswonger of Foundation
Bible College for his prior work on patron images.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Will add comments on Bugzilla.
Patch failed to apply because installer/data/mysql/sysprefs.sql had changed in master.
Corrected the same with this new patch.
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The original patch for 5533 removed the Lost status from the edit items screen; new items were not affected,
and batch changes could still be made, so this was not a consistent change.
This patch removes the filter that hid the Lost status dropdown, but then changes the default MARC framework
to hide this field by default (value -5). New installations will not see this status in the editor, unless
they manually activate it. This will enforce the semantics of using the "mark lost" options by default, but
provide a workaround for libraries that understand and accept the consequences of manually editing this field.
To test:
1. on an existing install, edit an item. you should have the Lost status visible
2. on a new install, editing or creating an item should not show the Lost status at all
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the field definition to
- it-IT (default and sample frameworks)
- de-DE, en, fr-FR, pl-PL (sample frameworks)
I am not sure about the database update. If we want to do that, it should perhaps update all frameworks and languages.
At the moment only en and de-DE default frameworks are updated.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds MARC21 field 545 to the English, French, German, and Polish MARC21
frameworks. The labels for the field still need to be translated into
French and Polish.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sending messages will not work correctly without correct data in sample_notice_message_transports
and sample_notice_message_attributes tables. There is no way to configure those tables in Koha.
SQL files should be in the mandatory part of the web installer.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 6537 - Move installer/data/mysql/en/mandatory/sysprefs.sql to installer/data/mysql/sysprefs.sql
Bug 6537 - Make the web installer use installer/data/mysql/sysprefs.sql
Bug 6537 - New syspref files with only the prefs that differ from the default
I have mostly deleted old syspref files and created new ones, with a new name,
mainly in order to reduce the risk of merge conflicts if the old syspref files
are changed before this patch is pushed, if it is pushed.
See http://wiki.koha-community.org/wiki/Simplified_syspref_handling_RFC for
a description of how the new files were created to reflect sysprefs that
differ from the global default.
.txt files have been moved to reflect the new names of the SQL files they are
associated with.
Bug 6537 - Remove syspref-related tests in xt/
As far as I can see, the previous patches for this bug makes the syspref tests
obsolete, and this patch removes them:
xt/syspref.t
xt/check_sysprefs.t
Bug 6537 - Fix a problem in French syspref file
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Installs syspref MARCAuthorityControlField008.
Rebased June 1, 2011 for master.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Follow up patch for installing pref BasketConfirmations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
This new system preference (in OPAC Features) allows libraries to
turn off reviewer photos entirely if they want to. The default is
for these photos to be shown.
Note that this setting is linked to ShowReviewer in that both of
them need to be turned ON for the avatars to be displayed.
Signed-off-by: Francois Marier <francois@debian.org>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Syspref allows the user to chose between the
Items home branch
Patrons home branch
Branch the item was checked out from
NULL
or OPACRenew
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The sample bib label layouts and the hard-coded default
format_string for new layouts used 'callnumber' when they
should have used 'itemcallnumber', preventing call numbers
from being printed on spine labels that use the system-supplied
layouts. Besides correcting the sample data, this patch
now also enshrines 'callnumber' as an alias for 'itemcallnumber'.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
After applying patch it works for new and old layouts (itemcallnumber and callnumber).
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Was being set to an invalid value ';'
resulting in weird behaviour where it looked set but was not
in practice
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fix JS error in /koha-tmpl/opac-tmpl/prog/en/modules/opac-user.tmpl
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previous code would only allow for an auxiliary stylesheet on the same server. This checks for
http in the opaccolorstylesheet syspref. If it's found, sets a different variable pointing to the
remote server location. If not found, retains the previous css directory path.
Also modifies the description of opaccolorstylesheet in the installer files to reflect current
usage as an auxiliary stylesheet.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds 953$i 'Inventory number' to the frameworks.
952$i inventory number is not repeatable, not mandatory and mapped to items.stocknumber.
In a later patch a search index will be added to make inventory number/stocknumber searchable.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the ability to specify a field with alternate holdings
information for display when a biblio has no items associated with it.
Two sysprefs are added:
* AlternateHoldingsField specifies what field/subfields contain the alternate
holdings information. When blank, the alternate holdings information is not
displayed. The default is blank, as this is a new feature.
* AlternateHoldingsSeparator specifies the string to be used to separate
multiple subfields in the alternate holdings display. The default is ' '.
Example use case:
A library which does not have a 1-1 relationship between uncontrolled 852 fields
from a legacy system and actual physical items on the shelf wishes to display
holdings information from the 852, but does not want to create item records
which are almost certain to be inaccurate. By enabling the alternate holdings
feature (AlternateHoldingsField = '852abcdhi' and AlternateHoldingsSeparator =
' -- '), the library is able to gradually add item records as they locate the
physical items, without losing the holdings information presently stored in the
uncontrolled 852 fields.
To test:
1) Set AlternateHoldingsField to '852abcdhi'
2) Set AlternateHoldingsSeparator to ' -- '
3) Change the hidden value of subfields 'a', 'b', 'c', 'd', 'h', and/or 'i' of
field 852 to 0 so that they display
4) Create a record which has data in the 852, but no item record
5) Look at holdings tab, where the data you entered should be displayed
Proof-of-concept initially developed for the American Numismatic Society.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This will work similar to 'Show volumes' links from traced series records and
set records. A link to search for analytics linked to serials.
A new syspref will be added: UseControlNumber.
This syspref will make it possible to determine, if $w and Controlnumber are
used for linking of records in bibliographic records.
If syspref is OFF (default), the search links will not use control numbers
but keywords.
If syspref is ON links will be built using Control-number and rcn index.
NOTE: 773$a is added to index Host-item. For testing on a dev installation:
copy record.abs to your koha-dev folder and reindex!
Rebased against 3.03.00.035 and a small typo fixed by Jared Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref ShowReviewer.
If ON (default) the reviewer/author of an OPAC comment will show.
If OFF the reviewer's name will be hidden.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Enables the library to choose whether to have patrons scan their barcodes for self checkout, or login
with username and password. Uses 'checkpw' for compatibility with LDAP authentication.
Also introduces a few new system preferences to make Self Checkout more secure and manageable:
SelfCheckTimeOut: the number of seconds before the self-checkout login times out for a patron
AllowSelfCheckReturns: indicate whether or not patrons can return materials via self-checkout
SelfCheckHelpMessage: user-configurable HTML to show specific text on the Help page.
Thank you to Marlboro College in Marlboro, VT for sponsoring and testing this development!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Add an option to the OPAC to display the URI that is stored in the 856u field
as an image instead of a text link. This would be implemented in the OPAC XSLT
style sheets for the Results and Details pages, and would require that the
corresponding OPAC XSLT option be set.
This enhancement is designed to enable the staff to catalog images, then have
them appear on the resulting pages in the OPAC when searching. Clicking on the
image would open it full size. If the image option is in use, then the default
link text would be disabled. Custom text would still appear if entered in the
"URLLinkText" option.
Add system preference "Display856uAsImage" with options of Results page,
Details page, Both Results and Details pages, Neither Results or Details page.
Notes for documentation manager:
There are two system preferences added for this enhancement:
OPACDisplay856uAsImage and Display856uAsImage. These appear on the OPAC and
Staff Client screens under the System Preferences.
The preference can be set to one of four options:
Both Details and Results pages
Details page only
Neither Details or Results pages
Results page only
In addition to this option being set, the corresponding XSLT option must be
turned on. Also, the corresponding 856q field must have a valid MIME image
extension (e.g., "jpg") or MIME image type (i.e. starting with "image/"), or the
generic indicator "img" entered in the field.
As of 14 March 2011 the UNIMARC xslt display files also require a "0" in the
second indicator location of the 856u field for the links to be activated. This
is not true for the MARC21 display files.
When all of the requirements are met, an image file will be displayed instead of
the standard link text. Clicking on the image will open it in the same way as
clicking on the link text.
Rebased and three original patches squashed into one on 30 March 2011 by Jared
Camins-Esakov.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Doug Dearden <dearden@sarsf.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a new system preference, COinSinOPACResults, which toggles the inclusion of
COiNS/OpenURL/Z39.88 in the search results display. Default is 'on', continuing
the current behaviour.
Disabling this feature will result in a significant increase in search speed, since
each call to GetCOinSBiblio requires a separate parsing of the MARC record, and there are
<OPACnumSearchResults> calls to this routine with each search.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch contains only the install stuff. (Functionality in previous patch.)
Rebased on March 28.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When XSLT is enabled, the subject tracings on the details view (both OPAC and
Intranet) previously only searched on the subfield 'a'. In addition, searches
failed when the tracing included parentheses, and the XSLT display did not
include subfields other than abcdvxyz, even for those 6xx tags that have other
subfields.
This patch adds a syspref: TraceSubjectSubdivisons. When
TraceSubjectSubdivisions is set to "Don't include" (default), the subject
tracings in the XSLT details view will only search on subfield 'a'. When
TraceSubjectSubdivisions is set to "Include", the subject tracings will search
on all subfields, not just subfield 'a'.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds a new syspref FineNotifyAtCheckin.
With syspref ON there will be a message when checking in books from
a patron with outstanding fines.
With syspref OFF (default) no message will be shown.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs:
OpacFavicon
IntranetFavicon
The two sysprefs take full URLs to an alternate favicon.ico file for the OPAC
and Staff Client, respectively. Leaving them blank will use the favicon.ico file
that is included with Koha.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
On OPAC/staff result page facets are truncated to 20 characters. On some OPAC
layout, it's not enough. A new syspref FacetLabelTruncationLength defines the
length to cut facets if necessary.
This patch add the syspref to searching.pref and add it to syspref various
language default values loaded into DB during installation process. It's not
necessary to update DB since length is fixed to 20 (as before) when this
syspref isn't defined in systemprefercences table.
Rebased to last HEAD: 2011.03.18
[Documentation] FacetLabelTruncationLength syspref in Searching tab
[3.2] It doesn't apply.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds prefs for facets in sql install files and updatedatabase script.
Rebased on March 17.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds the syspref TraceCompleteSubfields. When TraceCompleteSubfields
is set to "force," clicking on links in non-authority controlled subject
tracings will only find other records where the entire subfields match. Leaving
it at "don't force" keeps the current behavior of doing a keyword search of the
subject indexes.
This patch implements complete-subfield subject tracings in MARC21 XSLTs (OPAC
and Staff) and all Normal mode interfaces. UNIMARC XSLTs have not been updated.
This patch also adds the syspref UseAuthoritiesForTracings. When set to "Do not"
tracings in the XSLT detail displays will never generate links using authority
numbers, but rather use the heading strings (NB: the tracings currently use only
subfield 'a' for generating links).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jane Wagner <jwagner@ptfs.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
* add the AuthoritiesLog system preference to all
language installer SQL scripts
* options for a 'YesNo' should be '', not '0'
* fix wording glitch on preferences page
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds two sysprefs to allow libraries more fine-grained control over
when fines can and can't be overridden. The two sysprefs are:
* AllFinesNeedOverride - when this syspref is set to "Require" (default) any
fine will require a staffmember to override the fine in order to check out a
book. When set to "Don't require," fines below noissuescharge will not need
any override.
* AllowFineOverride - when this syspref is set to "Allow," staff will be able to
override fines that are above noissuescharge. When set to "Don't allow"
(default), staff will not be able to check out items to patrons with fines
greater than noissuescharge.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
solve comment 10 from nengard: This patch added these types only on upgrade. We need them to be added to new
installs to.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reimplements Paul Poulain's original OPAC Privacy patch, with some minor improvements and changes to wording
If the library enables the OPACPrivacy system preference along with the opacreadinghistory preference, and sets
an AnonymousPatron (must be a valid patron number in the database), the user will see a new tab upon login to
the OPAC, My Privacy. From there, the user can:
- Set their OPAC Privacy to one of three values
0 - Forever. This keeps their reading history unless they explicitly delete it; the bulk anonymiser won't touch it
1 - Default. Keep reading history until either they delete it or the library does
2 - Never. Instantly anonymises reading history upon item return
- Instantly delete their reading history
There is a warning and a popup to confirm. I've removed Paul's extra confirm checkbox, which seemed redundant
A note of which preference the patron has selected is added to the Patorn Details page in the staff client. This is read-only.
This patch also consolidates Privacy system preferences into the Privacy section of the OPAC tab.
Thank you to BibLibre for the original implmentation of this patch, and Los Gatos Public Library for funding and
testing the reimplementation.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds subfield 9 to DEFAULT MARC21 frameworks for the following fields:
648, 654, 655, 656, 657, 658, 662
Based on entry for 650$9 (values otherwise all the same). This patch does NOT handle non-DEFAULT frameworks
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This adds three system preferences: ShelfBrowserUsesLocation,
ShelfBrowserUsesHomeBranch, and ShelfBrowserUsesCcode. These can be
toggled to determine whether the shelf browser will ensure that the
items being show will match against location, homebranch, or collection
code, respectively.
Note that this also involves a bit of a refactor to clean up the shelf
browser code.
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reinstates the deleted maxItemsInSearchResults system preference, which was erroneously thought to no longer be utilized.
It's removal has led to bug 4430
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
